456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Thread, Seat and Key: Choosing the Best Wheel Locks for Trucks

best wheel locks for trucks: aerial view of a coastal road crossing small islands

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Pickup wheels are big, heavy and often the most expensive upgrade on the truck, which makes them an easy target in an apartment lot or a jobsite overnight. The best wheel locks for trucks put one keyed fastener on each wheel so a thief with a plain lug wrench walks away empty-handed.

Trucks bring their own fit questions: larger studs, coarser threads, six or eight lugs and long acorn nuts. Below are those checks, then six sets sized for truck threads.

Quick answer

Which wheel locks fit a pickup truck?

Pull one factory lug nut and match it: thread (often M14 x 1.5, M14 x 2.0 or 9/16-18 on trucks), seat shape, length and hex size. McGard cone seat sets cover the common sizes. For costly off-road wheels, a full-lock system replaces every lug, but every tire service then needs the key.

Our Quick Picks

Three starting points: a cone seat set for M14 x 1.5 studs, a matching set for coarser M14 x 2.0 studs and a full-lock system for six-lug wheels. All six sets are reviewed below.

McGard 24210 product photo
Common pickup thread

McGard 24210

Cone seat, M14 x 1.5, 21/22 mm hex

A chrome lock set sized for one of the most common truck stud threads.

SuitsPickups and SUVs with M14 x 1.5 studs and cone seat nuts
View on Amazon →
McGard 24205 product photo
Coarse M14 thread

McGard 24205

Cone seat, M14 x 2.0, 13/16 in hex

A long chrome lock for trucks that use the coarser 2.0 pitch.

SuitsTrucks with M14 x 2.0 studs and cone seat nuts
View on Amazon →
Gorilla 76604N The System product photo
Every lug locked

Gorilla 76604N The System

Duplex acorn, 14 mm x 2.00, 24 locks

Replaces all 24 lug nuts on a six-lug truck with keyed locks.

SuitsLifted or show trucks with costly six-lug wheels
View on Amazon →

What Makes Truck Wheel Locks Different

Truck hardware is heavier. Many modern pickups run 14 mm studs and some older or heavy-duty trucks use 9/16-18, so M12 sets sold for sedans will not even start on the threads.

A six-lug or eight-lug wheel still needs only one lock, though some owners of lifted trucks swap every nut for a lock. That adds security and a step at every rotation.

Four Measurements to Take Before Ordering

Work from one original nut, and confirm with a thread pitch gauge or the owner’s manual.

  • Thread size and pitch: M14 x 1.5 and M14 x 2.0 look alike, but a lock with the wrong pitch can cross-thread and ruin a stud.
  • Seat: most truck nuts sit on a 60-degree cone, while some factory and aftermarket wheels use a flat seat with a washer or shank. Match what is there now.
  • Length: long acorn nuts on deep alloy wheels need a lock long enough to reach full thread engagement without bottoming out.
  • Hex size: the key’s outer hex has to fit your lug wrench for roadside flats or the socket you keep in the cab.

If you do your own seasonal tire swaps, pair the key with a torque wrench that suits lug nut specs so the locks end up at the same torque as the rest of the nuts.

Best Wheel Locks for Trucks: Six Lock Sets in Detail

The list opens with the two most common pickup thread sizes, then covers a full-lock system, a dual-hex budget set, a five-piece set and a 9/16-18 option. Specs come from each Amazon listing, so confirm year, model and wheel type on Amazon before you buy.

1. McGard 24210: Chrome Cone Seat Wheel Locks, M14 x 1.5 Thread, Set of 4

McGard 24210 product photo
Key features
  • M14 x 1.5 thread, 60-degree cone seat
  • 21 mm and 22 mm dual hex key
  • 1.965 inch overall length
  • Through-hardened, made in the USA

The McGard 24210 is a set of four chrome wheel locks with an M14 x 1.5 thread and a 60-degree cone seat, packed with one key and an ID card. That thread shows up on a wide range of half-ton pickups and full-size SUVs, which is why this set is often the first one a truck owner checks. McGard lists it for both steel and aluminum wheels as long as the factory nuts use a tapered cone seat.

At 1.965 inches long, the lock is sized for the taller acorn nuts many trucks wear, and the key has a dual 21 mm and 22 mm outer hex. That dual hex gives it a better chance of fitting the lug wrench or socket already in the truck. McGard says every lock is through-hardened and tempered, and the plating combines several nickel layers with a microporous chrome layer to resist rust, a useful trait on a truck that sees salted roads.

The set is made in the USA, according to the listing. It will not suit wheels with flat or radius seat nuts, and a truck with M14 x 2.0 studs needs a different part. Compare the lock length with an original nut on deep aftermarket wheels before you order.

View McGard 24210 on Amazon

2. McGard 24205: Chrome Cone Seat Wheel Locks, M14 x 2.0 Thread, Set of 4

McGard 24205 product photo
Key features
  • M14 x 2.0 thread, cone seat
  • 13/16 inch key hex
  • 2.25 inch overall length
  • Unique key pattern with ID card

The McGard 24205 covers trucks whose studs use the coarser M14 x 2.0 pitch, a size that is easy to confuse with M14 x 1.5 at a glance. The set holds four chrome cone seat locks, one key and an ID card for ordering another key later. At 2.25 inches overall, it is one of the longer locks in this list, which helps on wheels with deep lug pockets.

The key takes a 13/16 inch socket or wrench. McGard uses the same plating and heat treatment as its other chrome locks: several nickel layers, a microporous chrome top layer and through-hardened, tempered steel. The listing also explains that the key pattern you receive will differ from the one in the photos, and that two separate sets will have two different keys.

That last detail matters if your truck came with dealer-installed locks, because McGard notes that its aftermarket keys do not match factory-installed locks. Replace all four locks together rather than mixing one new lock with old ones. As with any thread-specific set, use a pitch gauge or the owner’s manual to confirm M14 x 2.0 before buying, and confirm year, model and wheel on Amazon’s fit tool too, since one family of trucks can change thread size between generations.

View McGard 24205 on Amazon

serene rural road

3. Gorilla Automotive 76604N The System: Duplex Acorn Wheel Locks, 14 mm x 2.00, 24 Locks for 6-Lug Wheels

Gorilla 76604N The System product photo
Key features
  • 24 locks and one key
  • 14 mm x 2.00 thread, 60-degree seat
  • 7/8 inch hex
  • 2.00 inch overall length

Gorilla Automotive’s 76604N, sold as The System, takes a different approach from a four-lock set. It contains 24 duplex acorn locks and one key, enough to replace every lug nut on a truck with four six-lug wheels. There is no plain nut left on the wheel for a thief to start on, which is the appeal for owners of lifted trucks or expensive aftermarket wheels.

Each lock has a 14 mm x 2.00 thread, a 60-degree conical seat, a 7/8 inch hex and a 2.00 inch overall length, so the dimensions line up with the tall acorn nuts many six-lug trucks use. Because every lock shares one key pattern, a single key handles the whole truck, and you only need to look after one registration number.

The trade-off is convenience. Every rotation, flat repair and brake job needs the key on all 24 lugs, so the key has to travel with the truck, and its registration number should be stored somewhere safe. The set only suits six-lug wheels with 14 mm x 2.00 studs and cone seats, so it is the wrong pick for eight-lug heavy-duty trucks or flat seat wheels. Confirm the fit for your truck on Amazon before you order.

View Gorilla 76604N The System on Amazon

4. Gorilla Automotive 61641 Gorilla Guard: Acorn Wheel Locks, 14 mm x 1.50, Set of 4

Gorilla 61641 Gorilla Guard product photo
Key features
  • 14 mm x 1.50 thread
  • Dual hex key: 3/4 and 13/16 inch
  • 60-degree conical seat
  • 1.50 inch overall length

The Gorilla Guard 61641 is a set of four acorn wheel locks with a 14 mm x 1.50 thread and a 60-degree conical seat. It gives M14 x 1.5 truck owners a second option alongside the McGard 24210, with a different key design and a shorter body. The pack includes the four locks and a key.

The key is the practical highlight. It carries a dual outer hex of 3/4 inch and 13/16 inch, so it works with more of the lug wrenches and sockets drivers already keep in the cab. That reduces the chance of finding out at the roadside that the factory wrench and the lock key do not get along.

At 1.50 inches overall, this lock is noticeably shorter than the McGard set above. That suits factory steel and alloy wheels with ordinary lug holes, but some deep-pocket aftermarket truck wheels need a longer lock to reach the stud and leave room for a socket. Hold an original nut next to the listed length before you order, and confirm your seat type, since this acorn lock is made only for cone seat wheels. Keep the registration number from the packaging in case the key goes missing.

View Gorilla 61641 Gorilla Guard on Amazon

detailed close-up of a vintage black car door featuring chrome trim and handle

5. Dorman 712-1080: M14-2.0 Deep Wheel Lock Set, 5 Pack

Dorman 712-1080 product photo
Key features
  • M14 x 2.0 thread
  • Five locks in one set
  • Deep style for recessed lug holes
  • Corrosion-resistant finish

Dorman’s 712-1080 is a deep wheel lock set for M14 x 2.0 studs, and it comes as a five pack instead of the usual four. The extra lock is handy on a truck that carries a matching full-size spare, or for an owner who wants a spare lock on hand. Dorman sells it as a replacement for the factory wheel nuts and describes the locking nuts as corrosion-resistant.

The deep style is meant for wheels where the lug nut sits in a recessed hole, a common layout on aftermarket and factory alloy truck wheels. Dorman says its parts are made to strict specifications and tested for long service life, and it describes itself as a brand with more than a century of automotive experience that professionals rely on.

The Amazon listing is less detailed than the McGard and Gorilla pages, so lean on the fit tool. Dorman marks the set as fitting select models and asks buyers to enter their vehicle in Amazon’s garage tool, then read any fitment notes behind the blue information icon. Check seat type, length and key hex against an original nut once it arrives. If your truck uses M14 x 1.5 studs, this set will not thread on, and Dorman sells other sizes under separate part numbers.

View Dorman 712-1080 on Amazon

6. McGard 24234: Chrome Cone Seat Wheel Locks, 9/16-18 Thread, Set of 4

McGard 24234 product photo
Key features
  • 9/16-18 thread
  • Cone seat style
  • 7/8 inch key hex
  • 1.765 inch overall length

Not every truck runs metric studs. The McGard 24234 is a chrome cone seat lock set with a 9/16-18 thread, an SAE size found on some older pickups and on a number of heavy-duty trucks. The set includes four locks and one key, enough for one lock per wheel even on an eight-lug wheel.

The listing gives a 1.765 inch overall length and a 7/8 inch key hex. A 7/8 inch hex is larger than many car lug wrenches, so check that your truck’s factory wrench or your breaker bar socket matches before you need it at the side of the road. Like the other McGard chrome sets, it is meant for wheels whose nuts sit on a tapered cone seat.

This set is the right choice only when the stud really is 9/16-18, and the only way to know is to check the owner’s manual or test a nut with a thread gauge. Some heavy-duty wheels use flat seat nuts with a washer, and those need a different style of lock. Confirm your truck’s year, model and wheel on Amazon before ordering, and keep the McGard ID card with the truck’s papers rather than with the key.

View McGard 24234 on Amazon

Matching a Lock Set to Your Truck

The best wheel locks for trucks are the ones that match your nut, so use this table as a starting point. Thread sizes vary by make, model year and wheel.

Your factory nutSets aboveKey hexWatch for
M14 x 1.5, cone seatMcGard 24210, Gorilla 6164121/22 mm or 3/4 and 13/16 inchLock length on deep alloy wheels
M14 x 2.0, cone seatMcGard 24205, Dorman 712-108013/16 inch on the McGardFit notes on the listing
M14 x 2.0, six-lug, every nut lockedGorilla 76604N7/8 inchKey needed for every lug
9/16-18, cone seatMcGard 242347/8 inchConfirm stud size, not just truck size
Best wheel locks for trucks by thread size and key

Best Steering Wheel Locks for Trucks vs Lug Wheel Locks

The two products share a name and nothing else. A steering wheel lock is a bar that clamps across the wheel inside the cab to make the truck hard to drive away. A lug wheel lock protects the wheels and tires themselves.

serene rural road

If theft of the whole truck worries you most, research a steering lock; it works alongside lug locks rather than replacing them. For costly wheels parked in plain view, the lug locks reviewed here are the answer.

Fitting, Torque and Michigan Winters

Thread each lock in by hand for the first few turns. Snug it with the key and a hand wrench, then torque to the figure in your owner’s manual, and check it again after the first short drive.

Keep the key off air tools. An impact wrench used for tire changes can spin the key out of its pattern and round the lock in one burst, so run the regular nuts with the gun and finish the locks by hand.

peaceful winding road surrounded by dense forest greenery

Grand Rapids winters pack salt and grit into the key pattern. Brush out the locks at each seasonal tire swap, and keep the key in a pouch in the glovebox.

Stuck Locks, Lost Keys and Shop Help

Record the key code the day you install a set and store it apart from the key. McGard packs an ID card with its locks for ordering a new key, and its replacement parts information page also covers spare tire locks for trucks that carry a full-size spare.

breathtaking autumn landscape with snow-capped mountains

A lock that has been rounded off, or one with no key at all, should come off with proper extraction tools before the stud is damaged. When you book suspension repair in Grand Rapids or a brake job, leave the key with the truck so the wheels come off without delay.

Frequently Asked Questions

Do I need a wheel lock on every lug of a six-lug or eight-lug wheel?

No. One lock per wheel stops a thief who only carries a lug wrench. A full-lock system that replaces every nut adds security for expensive wheels, but every rotation and tire repair then depends on the key.

What are the best steering wheel locks for trucks?

Steering wheel locks are a separate product: a bar that clamps the steering wheel to slow down a thief driving the truck away. Pick one sized for a truck steering wheel, and keep lug locks on the wheels if the rims are the bigger worry.

How do I know my truck’s lug nut thread size?

Check the owner’s manual or remove one nut and test it with a thread pitch gauge. Also note the seat shape and length, because a lock with the right thread but the wrong seat can still work loose.

Can a tire shop remove wheel locks with an impact gun?

Lock makers advise against it, because an impact gun can damage the key and the lock pattern. Hand the key over at drop-off and ask for the locks to be removed and tightened by hand.

Is the truck pulling, clunking over bumps or wearing tires unevenly? Call 456 AutoFix at 616-279-3832 from 8am to 5pm on weekdays, or send us a booking request online and we will check the brakes, steering and suspension.

Working the same hours we do? Our after-hours drop-off at 456 Carrier St NE, Grand Rapids, takes the truck and its lock key, along with a short note on what you have noticed.