As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Ford built its trucks in so many brake configurations that the same model name can hide three or four different calipers. Finding the best brake calipers for Ford pickups and SUVs is less about brand loyalty and more about matching the exact truck, corner and brake package, then picking a finish that will survive salted roads.
This guide sticks to Ford listings: F-150, Super Duty, Expedition and older trucks. If you want the wider picture across all makes, our main guide to choosing brake calipers by type and brand covers it.
Quick answer
Which brake calipers should you buy for a Ford truck?
Start with a listing that names your model, years and corner. On a 2012-20 F-150, the PowerStop S5404 pair covers both front sides in one box. Super Duty owners need twin-piston units such as the Detroit Axle 2013-22 caliper, and Motorcraft suits drivers who want Ford’s own brand. Replace calipers in axle pairs.
Our Quick Picks
Three starting points for the most common Ford caliper jobs; all six picks are reviewed below.

PowerStop S5404
Both front calipers with brackets and hardware, finished in red powder coat.

Detroit Axle Super Duty Caliper
A twin-piston caliper with bracket for late-model Super Duty trucks.

Motorcraft BRF-168
A Motorcraft caliper from Ford's own replacement parts line.
Why Ford Calipers Are Hard to Shop For
An F-150 and an F-250 Super Duty look like close relatives, but their brakes have little in common. The Super Duty runs bigger rotors and heavier twin-piston front calipers, so an F-150 part will not bolt on. Even within one F-150 generation, wheel size, payload or towing packages and drivetrain can change which caliper the truck left the factory with.
Age adds another layer. Some late-1990s and early-2000s Ford trucks had rear disc brakes while others of the same years used drums, so look behind your rear wheels before you order a rear caliper. On newer Fords with an electronic parking brake, the rear calipers carry a motor and need a service procedure before the pads come out.
Decoding a Ford Caliper Listing
Four details on a listing tell you most of what you need:
- New or remanufactured: a reman unit is an original Ford casting that has been stripped and rebuilt, while a new one is freshly cast and usually plated or coated.
- Bracket included or not: a caliper sold with its bracket saves you from reusing a rusty one.
- Single or pair: many Ford listings cover only one corner, so check the position and whether you need a second box.
- Pads in the box: most replacement calipers ship without pads, so plan the friction separately.
Since pads are almost always a separate purchase, it helps to choose them before the calipers arrive. Our roundup of quiet, long-lasting brake pads for daily driving is a good starting point for a commuter, and F-150 owners can go straight to our F-150 brake pad picks.
Best Brake Calipers for Ford: Six Listings Up Close
The six calipers below cover late-model F-150s, Super Duty trucks old and new, and older Ford trucks and SUVs. Every fact comes from the Amazon listing or the maker, and each listing names its own vehicles, so treat the fit details as a starting point for your own check.
1. PowerStop S5404: Red Powder-Coated Front Caliper Pair for 2012-20 Ford F-150

- Driver and passenger front calipers in one box
- Red powder coat that resists rust and corrosion
- Pressure tested and inspected before shipping
- Brackets, guide pins, boots and bleeders included
The PowerStop S5404 is a matched set of front calipers for the 2012 to 2020 Ford F-150, with the driver and passenger units packed together. That covers the most common F-150 caliper job in one order, and it settles the question of whether the second side should be replaced as well. Each caliper wears an electrostatic, high-temperature red powder coat that PowerStop says resists rust and is easy to wipe clean.
The box is meant to be complete. According to the listing, it includes the mounting brackets, seals, caliper guide pins, dust boots, bleeder screws and the pad attachment hardware, so tired original hardware does not go back on the truck. PowerStop’s page for its powder coated calipers adds high-temperature EPDM dust boots, premium silicone lubricant and stainless abutment clips, and it notes that every caliper is pressure tested to check piston operation.
These calipers bolt on in place of the stock units with no modification, so braking feel should stay close to factory; the red finish is mainly about corrosion resistance and looks. Pads are not part of the kit. The listing carries a 90-day or 3,000-mile warranty and asks buyers to check the Amazon Confirmed Fit bar, because F-150 brake packages vary across those years.
View PowerStop S5404 on Amazon
2. Wagner CN11797SC: New Semi-Loaded Caliper for Select Ford F-150 Models

- Newly manufactured, not a rebuilt core
- Semi-loaded: caliper arrives on its bracket
- Zinc-coated cast iron housing and bracket
- Sealant grease between metal and rubber parts
Wagner is a familiar brake name on Ford trucks, and the CN11797SC is one of its new semi-loaded calipers for the F-150. Semi-loaded means the caliper comes mounted on its bracket, ready for pads, which makes the swap quicker and replaces a bracket that may have rusted along with the old caliper. The listing title says select F-150 models without naming years or the corner, so the fit checker has to supply those details.
Every part of this caliper is newly made rather than taken from a used core. The listing describes OE-matched pistons, hardware, boots and seals, all engineered to match original equipment requirements. Wagner uses aluminum or plated castings and application-specific zinc-coated cast iron housings and brackets, which helps the assembly hold up against the slush and road brine an F-150 meets every winter.
A sealant grease sits between the metal and rubber components to cut friction where the piston and seals meet, helping the caliper release cleanly after each stop. Because this is a single caliper, you will likely need its mirror image for the opposite side. Enter your F-150’s year, cab, drive type and brake package in Amazon’s fit checker, and buy pads separately.
View Wagner CN11797SC on Amazon

3. Motorcraft BRF-168: Ford-Brand Front Right Disc Brake Caliper for Ford Trucks

- Motorcraft is Ford's own parts brand
- Front right (passenger side) position
- Made for Ford and Lincoln vehicles
- Two-year, unlimited-mileage warranty per listing
Motorcraft is the replacement parts brand that Ford sells through its dealers and parts counters, so a Motorcraft caliper is the closest you can get to staying with the brand that built your truck. The BRF-168 is a front right, or passenger side, disc brake caliper, and the listing describes it only as a part for Ford trucks. That makes the fit checker the essential step before buying.
The listing positions Motorcraft as premium aftermarket replacement parts for Ford and Lincoln vehicles, designed to give trouble-free, consistent performance and tested for long life. It also describes a two-year, unlimited-mileage warranty that includes labor with no commercial exceptions. Read the warranty terms on the listing for the details of how a claim works, since coverage of that kind is often tied to where the part is installed.
Because the listing gives no model years, enter your exact truck in Amazon’s fit tool and read any fitment notes before ordering. It covers one side only, so plan on the matching left-hand caliper if both are worn. For owners of a Ford truck who would rather keep Ford-brand parts throughout the brake system, this listing is the simplest route to that.
View Motorcraft BRF-168 on Amazon
4. Detroit Axle Front Right Caliper: Twin-Piston Unit with Bracket for 2013-22 F-250 Super Duty

- Fits 2013-22 F-250 and F-350 Super Duty
- Two phenolic pistons, 2.36 inches each
- Front right caliper with bracket included
- Impact, wear and fatigue tested
Super Duty trucks need calipers built for their weight, and this Detroit Axle unit is listed for the 2013 to 2022 Ford F-250 Super Duty and F-350 Super Duty. The listing also names the 2013 to 2015 F-450 Super Duty, but only the crew cab pickup. It is a front right caliper and ships with its bracket, so the whole passenger-side mounting comes out of the box together.
The listing gives unusually specific details. The caliper uses two phenolic pistons, each 2.36 inches (59.89 mm) across, which matches the twin-piston design that heavier trucks need to spread clamping force over a large pad. Detroit Axle says its calipers undergo impact, wear and fatigue testing for quality and durability, and the listing advertises a 10-year warranty.
Phenolic pistons resist corrosion well and insulate the brake fluid from some of the heat a loaded truck generates on a long downhill or while towing. Only one corner is in the box, so order the front left unit as well when both sides are due, along with pads rated for a heavy-duty truck. Confirm your exact build and cab style in the fit checker, since Super Duty brake setups vary by year.
View Detroit Axle Super Duty Caliper on Amazon

5. Cardone 18-B4690: Remanufactured Caliper with Bracket for 1999-2000 F-250 Super Duty

- Fits 1999-2000 F-250 and F-350 Super Duty
- Remanufactured original casting with bracket
- New pistons, EPDM seals and bleeder screws
- Pressure tested for leak-free operation
The first generation of the Super Duty is now more than 25 years old, yet many of these trucks are still working. The Cardone 18-B4690 is a remanufactured caliper with its bracket, listed for the 1999 to 2000 Ford F-250 Super Duty and F-350 Super Duty. Since it starts as an original casting, it keeps the dimensions of the part Ford fitted at the factory.
Cardone describes its remanufacturing on the CARDONE Reman page as a five-step process: cores are taken apart, cleaned, inspected, rebuilt with common wear areas strengthened, and then tested. For this caliper, the listing names new pistons, high-temperature EPDM rubber seals, stainless steel hardware clips, bleeder screws, banjo bolts and washers. Every unit is pressure tested for leak-free operation and proper piston movement.
Ports are capped with plastic to protect the threads, and the caliper wears an OE-style rust-resistant coating. The title does not state which corner it covers, so check the position in the fit checker and order the opposite side if both calipers are tired. Reman parts often carry a core charge refunded when the old caliper is returned, so check the listing for that.
View Cardone 18-B4690 on Amazon
6. Raybestos R-Line FRC10912: Zinc-Plated Reman Rear Left Caliper for Older F-150 and Expedition

- Rear left caliper for 1999-2004 F-150
- Remanufactured OE housing and bracket
- Zinc electroplating on cast iron parts
- Silicone boots where applicable
Older Ford trucks with rear disc brakes are well served by the Raybestos R-Line FRC10912, a remanufactured rear left caliper. The listing names the 1999 to 2004 F-150, the 2004 F-150 Heritage, the 1997 to 2002 Expedition and the 1997 to 1999 F-250. It also covers the 1998 to 2002 Lincoln Navigator and the 2003 to 2011 Lincoln Town Car, all on the rear left corner.
R-Line is the Raybestos line of premium remanufactured calipers. According to the listing, it reuses original equipment housings and brackets, which keeps the fit, form and function of the factory unit, and it adds silicone boots that match or improve on the OE design where applicable. All cast iron housings and brackets receive zinc electroplating for protection in every kind of weather.
That plating matters on a truck of this age that has already seen two decades of Michigan salt. Check the rear brakes first, because several trucks from this period came with rear drums depending on the trim and model year. Then confirm the side, since this listing is for the left rear only, and order the right rear separately if you are doing both corners.
View Raybestos R-Line FRC10912 on Amazon
Ford Caliper Picks at a Glance
Use the table to narrow the field by truck and type, then open the listing and run your VIN details through the fit checker.
| Caliper | Type and position | Fords the listing names | Suits |
|---|---|---|---|
| PowerStop S5404 | New pair, front, powder coated | 2012-20 F-150 | Doing both front corners at once |
| Wagner CN11797SC | New, semi-loaded | Select F-150 models | Owners who want new parts with a bracket |
| Motorcraft BRF-168 | Front right | Ford trucks (use the fit checker) | Drivers who prefer Ford’s own brand |
| Detroit Axle front right | New, twin piston, with bracket | 2013-22 F-250 and F-350 Super Duty | Late-model Super Duty trucks |
| Cardone 18-B4690 | Remanufactured, with bracket | 1999-2000 F-250 and F-350 Super Duty | Keeping an early Super Duty on the road |
| Raybestos R-Line FRC10912 | Remanufactured, rear left, zinc plated | 1999-2004 F-150, 1997-2002 Expedition, others | Older trucks and SUVs with rear discs |
Whatever you order, a caliper swap opens the hydraulic system, so set aside fresh brake fluid of the type printed on your master cylinder cap. Our article on how often to change brake fluid explains why old, wet fluid is worth flushing while the system is open anyway.

Brine, Plows and Ford Brakes in West Michigan
A lot of the Ford trucks in Grand Rapids work hard in winter, hauling trailers, salt spreaders or plow blades through months of brine and slush. That mix of extra weight and corrosion is rough on calipers. Rust creeps under the pad abutment clips, the slide pins dry out inside their boots, and a caliper that no longer floats freely drags one pad against the rotor.
Coatings help, which is why the plated, zinc-coated and powder-coated units above make sense here. Upkeep matters too: clean the bracket, replace torn boots and relube the pins with a high-temperature brake grease whenever the pads come out. A spring underbody rinse after the salt season also slows the corrosion on bleeders and brake lines.

When a Ford Caliper Job Needs a Shop
Bolting on a caliper is the easy half. The harder half is freeing seized bracket bolts, torquing everything to Ford’s specification, and bleeding the system until the pedal is firm, which on some ABS units calls for a scan tool. If your truck pulls to one side, smells hot after a short drive or wears one pad far faster than the other, our guide to sticking brake caliper symptoms helps confirm the cause first.
Brakes are a safety system, so there is no shame in letting a shop handle the install. A heavy Super Duty that tows or plows puts more load on every part of the job, from the bracket bolts to the flex hoses, and a missed step shows up as a soft pedal at the worst possible time.

Plenty of owners order the best brake calipers for Ford trucks themselves and have us fit them. Our brake repair service in Grand Rapids handles calipers, pads, rotors, lines and fluid on foreign and domestic vehicles, and you can read about our head mechanic’s brake certification on the About Us page.
More Buying Guides
Frequently Asked Questions
Are F-150 and F-250 Super Duty calipers the same?
No. The Super Duty uses larger rotors and heavier twin-piston front calipers, so F-150 calipers do not fit it. Order parts listed for your exact truck, years and brake package.
Are Motorcraft calipers worth it on a Ford?
Motorcraft is Ford’s own parts brand, so it is the closest match to the original part and a sensible choice if you value that. Quality aftermarket calipers from brands like Wagner, Raybestos or PowerStop also work well when they are listed for your truck.
Do I need to replace both front calipers on my F-150?
It is the usual advice. A new caliper on one side and a worn one on the other can clamp unevenly and pull the truck. A pair such as the PowerStop S5404 makes that simple on 2012-20 trucks.
Do remanufactured Ford calipers come with the bracket?
Some do and some do not. The Cardone 18-B4690 and the Raybestos R-Line unit here include brackets, but many reman listings sell the caliper body alone, so read the description before you order.
Is your Ford pulling, grinding or sitting low on brake pedal? Call 456 AutoFix at 616-279-3832 on a weekday between 8am and 5pm, or request a brake appointment through our contact page.
If your workday runs into our hours, drive the truck to 456 Carrier St NE in Grand Rapids whenever suits you and use the after-hours drop-off, leaving a quick note on what the brakes are doing.
