456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

OBS Chevy Upper Arms Put to the Moog vs Mevotech Test

moog vs mevotech: peaceful rural road winding through a colorful autumn forest under a cloudy sky

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Ask ten truck owners about Moog vs Mevotech and you will hear ten different stories, most of them about one part on one vehicle years ago. Forum threads swing between loyal fans and angry returns, and very few of them name an actual part number. That makes the brand question harder to settle than it should be.

So this comparison narrows the field to one job: the front upper control arm with ball joint on a 1988-1999 Chevrolet or GMC K1500, the four-wheel-drive OBS pickup. Moog sells it as the RK620720, and Mevotech’s Supreme CMS50120 lists the RK620720 as one of the numbers it replaces. Everything below comes from the two Amazon US listings and the makers’ own sites, and gaps in a listing are called out rather than filled in.

Quick answer

Which upper arm should a K1500 owner choose, Moog or Mevotech?

Choose the Moog RK620720 when you want the listing to name your truck and offer a matching right-side arm. Choose the Mevotech Supreme CMS50120 when you want a stated grease fitting, castle nut and cotter pin in the box, and you are comfortable confirming fit through its cross-reference numbers.

Our Quick Picks

One driver-side upper arm from each brand for the 1988-1999 K1500, plus Moog's passenger-side mate, each covered in detail below.

Moog RK620720 product photo
Named fitment pick

Moog RK620720

Front left upper, 1988-1999 K1500

Compatibility bullet spells out the trucks and vans it fits.

SuitsOwners who want the fit in writing
View on Amazon →
Mevotech CMS50120 product photo
Greasable pick

Mevotech CMS50120

Supreme arm, replaces GM 12388431

Lists a grease fitting, hardware and forged steel build.

SuitsOwners who grease the front end
View on Amazon →
Moog RK620719 product photo
Matched pair pick

Moog RK620719

Front right upper, OBS GM trucks

Passenger-side mate for a matched set of Moog upper arms.

SuitsTrucks with play in both upper joints
View on Amazon →

Who Builds These Arms and Why It Matters

Moog belongs to DRiV, the parts group that also owns Monroe and Wagner. DRiV’s Moog brand page describes it as a premium steering, suspension, wheel end and driveline line, and it points to “Problem Solver” design changes such as a pre-installed dust boot on its Problem Solver ball joints. Moog has been on shop shelves across North America for decades, which is why so many mechanics reach for it by habit.

Mevotech is a Toronto company that has made chassis parts since 1982. Its official site says the company holds 13 patented chassis technologies and designs its parts with professional technicians in mind. The brand sells several tiers, with Supreme as its main replacement line and TTX sold as a higher tier, so the name on the box tells you less than the line printed under it.

That point comes up again and again among owners who have tried both. The tier you buy usually matters more than the logo, and that holds for Moog too. Comparing a budget part from one brand with a premium part from the other says very little about either company.

Reading the Two Listings Side by Side

On the OBS K1500, the upper arm carries its own ball joint and two bushings at the frame end. Both parts here arrive as a complete assembly, so there is no joint to press or rivet to drill out. If you only want the joint itself, our guide to choosing ball joints covers press-in and bolt-in designs and the tools each one needs.

The table below sticks to what each listing states in writing. Where a field is blank on the page, it says so.

DetailMoog RK620720Mevotech CMS50120
Vehicles named1988-1999 K1500, 1988-2000 K2500, 1990-2005 Astro and Safari, 1992-1996 K2500 SuburbanNone; fit shown by cross-reference
Numbers it replacesNot listedGM 12388431, Moog RK620720 and several other brands
Grease fittingNot mentioned180 degree SAE fitting included
Hardware in the boxNot mentionedPart-specific castle nut and cotter pin
Construction claimsBuilt for road stress, supports alignmentForged steel, sintered bearings, protective surface treatment
Matching right arm foundYes, Moog RK620719Not found in our search
Moog vs Mevotech: the RK620720 and CMS50120 as listed on Amazon US

Put simply, Moog’s page is stronger on fitment and Mevotech’s page is stronger on hardware and build detail. Neither listing publishes a weight, a bushing compound or a warranty term in its bullets.

Moog vs Mevotech OBS Upper Arms Reviewed

The first two arms are direct equivalents for the driver side, and the third is Moog’s passenger-side partner for owners doing both corners. Check your year, cab, drive type and gross weight rating against Amazon’s fitment tool before ordering, because these trucks were built in many configurations.

Moog RK620720: Front Left Upper Control Arm and Ball Joint for 1988-1999 Chevy and GMC K1500

Moog RK620720 product photo
Key features
  • Front left (driver) upper position
  • Lists 1988-1999 K1500 and 1988-2000 K2500
  • Also covers Astro, Safari and K2500 Suburban
  • Right-side partner sold as RK620719

The Moog RK620720 is a complete upper control arm with the ball joint already fitted, built for the driver side of GM’s full-size trucks and vans. Its compatibility bullet lists the 1988-1999 Chevrolet and GMC K1500, the 1988-2000 K2500, the 1990-2005 Astro and Safari vans and the 1992-1996 K2500 Suburban. Because the arm and joint come as one assembly, there is no riveted joint to drill out on a rusty truck.

The listing keeps its claims fairly general. It says the arm helps hold correct wheel alignment and stable handling, that it is made to stand up to road stress and daily driving, and that it can bring back steering response on a worn front end. It names DRiV as the group behind Moog. It does not mention a grease fitting, the bushing material or the hardware supplied, so check the photos and the seller’s notes if those details matter.

Where this arm earns its place is clarity of fit and the matching passenger-side RK620719, which lets you do both corners in one brand. Confirm your year, cab and drive type in Amazon’s fitment check, and plan an alignment once the arm is torqued at ride height.

View Moog RK620720 on Amazon

winding road through a vibrant autumn forest with golden leaves and sunlight

Mevotech Supreme CMS50120: Control Arm and Ball Joint Assembly Replacing GM 12388431 and Moog RK620720

Mevotech CMS50120 product photo
Key features
  • Replaces GM 12388431 and Moog RK620720
  • 180 degree SAE grease fitting included
  • Castle nut and cotter pin supplied
  • Forged steel with surface treatment

The Mevotech Supreme CMS50120 is an upper control arm and ball joint assembly from the brand’s main replacement line. The listing does not name a vehicle. Instead it prints the numbers it replaces, including GM 12388431 and Moog RK620720, which is how it lines up with the driver-side upper arm on the 1988-1999 K1500. Check those numbers against your old part or a parts counter lookup before you order.

Mevotech is more specific than Moog about what comes in the box and how the part is built. The ball joint uses the company’s patented sintered bearings, and a 180 degree SAE grease fitting is included so the joint can be serviced. A part-specific castle nut and cotter pin are supplied for the ball stud. The listing also states forged steel construction that meets or exceeds original specifications, plus a protective surface treatment meant to slow rust.

That grease fitting is the main practical difference for a work truck. If you grease the front end at each oil change, the joint can be purged of salty water and grit before it does damage. No matching right-side Mevotech arm turned up in our search, so plan on a separate part for the passenger side.

View Mevotech CMS50120 on Amazon

Moog RK620719: Front Right Upper Control Arm and Ball Joint for 1988-2000 Chevy and GMC Trucks

Moog RK620719 product photo
Key features
  • Front right (passenger) upper position
  • Mirror partner to the RK620720
  • Listing names 1988-2000 Chevrolet trucks
  • Arm and ball joint as one assembly

The Moog RK620719 is the passenger-side counterpart to the RK620720, a front right upper control arm with ball joint for older GM full-size trucks. It is in this comparison because upper joints on an OBS pickup rarely wear out one at a time. Both sides have carried the same weight over the same broken roads, and when one has play the other is often close behind.

Its Amazon listing is thinner than the left-side page. The bullets returned for it begin with 1988-2000 Chevrolet trucks, 1995-1999 Chevrolet models, 1999-2000 Cadillac and 1990-2005 Astro, then cut off, and the feature line names it as the front right upper part. That is enough to place it, but not enough to confirm your exact truck, so lean on Amazon’s fitment check and compare it with the old arm before fitting.

Pairing it with the RK620720 gives you the same arm design and bushing feel on both sides, and a single alignment covers the job. It also works as the right-side choice for anyone who fits the Mevotech arm on the left, since no Mevotech passenger-side equivalent appeared in our search.

View Moog RK620719 on Amazon

peaceful suburban street lined with vibrant autumn trees and fallen leaves on a sunny day

Where the Moog vs Mevotech Choice Is Decided

Greasing and service life

The Mevotech listing states that a 180 degree SAE grease fitting comes with the arm. On a truck that sees salt, gravel roads or plowing duty, a greasable joint lets you push out old, dirty grease at every oil change instead of waiting for the boot to dry out. The Moog RK620720 listing does not say either way, so study the photos or ask the seller if a fitting matters to you.

Grease only helps if someone actually uses the gun. A sealed joint that is left alone and a greasable joint that is ignored tend to wear at a similar pace.

How each listing proves fit

Moog lists the trucks and vans directly in a compatibility bullet, from the K1500 and K2500 to the Astro and Safari vans. Mevotech takes the part-number route and prints GM’s 12388431 plus a string of other brands’ equivalents, including the RK620720 itself. If your old arm still has a readable stamp or you have the GM number from a parts counter, the Mevotech page is quick to confirm.

beautiful autumn landscape featuring vibrant red and orange foliage along a peaceful dirt road

If you are not sure which arm is on the truck now, lay the new one beside the old one before you pull anything. Match the bushing spacing, the ball stud taper and the bump stop pad, and do it on the bench rather than under the truck with the spring loaded.

What owners report online

Owner threads on GM truck forums are split. Some report long service from Mevotech Supreme arms on heavy trucks, while others describe early returns on one part or another, and the same pattern shows up for Moog. The fair reading is that both brands have good and weak parts, and that the specific number and line matter more than the brand on the box.

Picking the Right Arm for Your Truck

Start with how you will confirm fit, then decide whether both sides need doing.

Your situationLeans towardReason
You want your truck named on the listingMoog RK620720Compatibility bullet names the K1500 and K2500
You have GM number 12388431Mevotech CMS50120Listed directly among the numbers it replaces
You grease the front end at each oil changeMevotech CMS50120Stated 180 degree SAE fitting
Both upper joints have playMoog RK620720 and RK620719Left and right arms from one brand
You want nut and cotter pin in the boxMevotech CMS50120Part-specific hardware listed
Moog vs Mevotech for the OBS K1500, matched to common situations

On a truck this old, the passenger-side arm has covered the same miles as the driver side. Doing both at once keeps the bushings and joints aging together, and you only pay for one alignment. If you go Mevotech on the left and cannot find its right-side mate, fitting the Moog RK620719 on the right is a sensible compromise, as long as both parts match the original design.

stunning sunset with rays illuminating the landscape

Upper arms are only one piece of an OBS front end that is now 25 years old or more. Lower joints, idler arms and shocks often wear on the same schedule, and a tired shock can feel a lot like a loose joint. Our shocks and struts guide for daily drivers helps you tell the two apart before you spend money in the wrong place.

Rust, Road Salt and Knowing When to Stop

West Michigan salt is rough on these trucks. Upper arm bolts on an OBS K1500 often rust into the frame bushings, and freeze-thaw potholes hammer the joints every spring. A knock over bumps, steering that wanders on the highway or a front tire wearing on one edge all point toward the front end, and our article on bad ball joint symptoms walks through the checks.

tranquil rural road under a vibrant sunset

Whichever side of the Moog vs Mevotech decision you land on, support the lower arm with a jack while the upper arm is out, because the torsion bars on the four-wheel-drive K1500 keep the lower arm loaded. Torque the bushing bolts with the truck at ride height, and book an alignment the same day. If the bolts will not budge or you would simply rather hand it over, our technicians take care of suspension repair in Grand Rapids, from inspection to alignment.

Frequently Asked Questions

Is Moog or Mevotech better for control arms?

Neither brand is better across every part. On the K1500 upper arm compared here, Moog names the trucks it fits and offers a matching right side, while Mevotech lists a grease fitting, mounting hardware and forged steel construction. Compare the exact part numbers for your vehicle rather than the brands.

Does the Mevotech CMS50120 fit a 1988-1999 K1500?

The listing names no vehicle, but it lists GM 12388431 and Moog RK620720 among the numbers it replaces, and Moog lists the RK620720 for the 1988-1999 K1500. Run your truck through Amazon’s fitment check before buying to be sure.

Do Mevotech Supreme control arms have grease fittings?

Many do, but not all. The CMS50120 listing states that a 180 degree SAE grease fitting is included, while other Supreme arms list a 90 degree fitting or do not mention one, so read the bullets for your exact part number.

Should I replace both upper control arms at once?

On a high-mileage truck it usually makes sense. Both sides have worn at a similar rate, and replacing them together means a single alignment and an even feel from side to side. If only one joint has play, replacing that side alone is still a sound repair.

Hearing a clunk from the front of the truck every time you turn into a driveway? Phone 456 AutoFix at 616-279-3832 between 8am and 5pm, Monday to Friday, or request a front end check on our contact page.

Working until close? Bring the pickup to 456 Carrier St NE, Grand Rapids, use the after-hours drop-off, and we will take it from there once the shop opens.