As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A tire pressure light that stays on after the pressures are correct usually means a sensor has stopped talking to the truck. On a Ram that is often a tired battery inside the sensor, a corroded valve stem, or a new set of wheels with no sensors at all. Shopping for the best TPMS sensors for Ram 1500 trucks starts with one detail many listings bury: which Ram 1500 you actually own.
This page sorts out the generations, then reviews six sensor options that match them. For how TPMS sensors work across all makes, see our general TPMS sensor buying guide.
Quick answer
Which TPMS sensors fit a Ram 1500?
It depends on the body style. A 2019 or newer Ram 1500 (DT) takes 433 MHz sensors that replace Mopar 68293199AA, such as the Mopar part or the A-Premium set. A 2014-2018 truck or a 2019-2024 Ram 1500 Classic uses a different 433 MHz sensor, such as the Hucigen DS set. Plan on a relearn either way.
Our Quick Picks
Three starting points for most owners: the genuine Mopar sensor and a four-pack for 2019 and newer DT trucks, plus a four-pack for the DS and Ram 1500 Classic. All six options are reviewed below.

Mopar 68293199AA Sensor
The factory part number that DT replacement sets are built to copy.

A-Premium DT 4-Pack
A full set for new body trucks with every corner replaced at once.

Hucigen DS and Classic 4-Pack
Built for the older body style that many Ram owners still drive.
New Body, Classic or Older DS: Know Your Ram First
Ram launched the current Ram 1500, known as the DT, for the 2019 model year. It kept building the previous truck alongside it as the Ram 1500 Classic, which shares its design with the 2014-2018 DS. That overlap is why a 2021 Ram 1500 can need either of two different sensors.
The sensor listings draw the line in the same place. DT sets name OE number 68293199AA, while DS and Classic sets list a different family of numbers, such as 68249197AA and 68157568AA. One seller also notes that its DS sensors suit the 5-lug wheels and not the 6-lug DT trucks, a quick visual check if you are unsure.
The surest check is the part number printed on one of your old sensors, or the truck’s VIN entered into the Amazon fitment tool or a parts catalog. Every set below runs at 433 MHz, so frequency alone proves nothing.
What Sets a Good Ram Replacement Sensor Apart
Most Ram 1500 sensors on Amazon look alike in photos, so compare these details instead:
- Pre-programmed or programmable: pre-programmed sensors arrive set up for one truck family, while programmable ones need the maker’s tool first.
- Relearn needs: nearly every listing says the truck must still learn the new IDs, sometimes with a TPMS tool.
- Valve stem: aluminum stems need correct torque and a fresh seal; rubber snap-in stems are easy to renew.
- Battery life claims: sellers quote five to ten years, and those are their own figures.
A tool that reads each sensor’s ID and pressure makes the job easier to verify. If you plan to handle an OBD relearn yourself, check that a scanner lists TPMS service for the Ram before you buy; our OBD2 scanner guide for DIY mechanics compares the main options.
Best TPMS Sensors for Ram 1500: Six Options Reviewed
Three options suit the 2019 and newer DT, two suit the DS and Classic, and one programmable sensor needs an Autel tool. Battery and accuracy figures are the sellers’ own claims.
1. Mopar 68293199AA: Genuine OE Tire Pressure Sensor, Single Unit

- Genuine Mopar OE part
- Part number 68293199AA
- Sold as one sensor
- Made to Mopar fit, form and function specs
This is the Mopar part itself, sold under the number 68293199AA. That is the OE number the aftermarket DT sets in this list say they replace, which makes it the reference point for 2019 and newer Ram 1500 trucks. The listing keeps things brief: a genuine Mopar sensor, manufactured to meet the specifications for fit, form and function.
Because it comes as a single sensor, it suits the most common repair on a truck that is only a few years old, where one sensor has failed, been damaged during a tire change or lost its valve to a pothole. Fitting the factory part keeps all four corners on the same hardware, and the truck’s system is built around this design. Ask the tire installer to fit a new seal and valve core at the same time.
The listing gives no fitment years, frequency or battery details, so this is one to check carefully. Enter your VIN in the Amazon fitment tool or compare the number on an old sensor before ordering, since the Ram 1500 Classic uses a different sensor. The truck will still need to learn the new ID, so follow the relearn steps in your owner’s manual or have a shop with a TPMS tool finish the job.
View Mopar 68293199AA Sensor on Amazon
2. Schrader 29057: Snap-in Gen6 PAL 433 MHz Sensors, 4-Pack

- 433 MHz Gen6 PAL potted sensor
- Snap-in valve design
- Listed for select Ram 1500 2018-2025
- OE replacement line from Schrader
Schrader is one of the large original equipment suppliers of TPMS sensors, and its listing says its OE technology appears in over half of vehicles worldwide. This four-pack holds the 29057, a snap-in Gen6 PAL potted sensor that runs at 433 MHz. Schrader lists it as compatible with select Ram 1500 models from 2018 to 2025.
The OE replacement line is meant to match original quality and performance, and Schrader says these sensors go through high-speed and extreme-temperature testing. A snap-in rubber valve is easy to renew whenever the tires come off, which is useful on a truck that sees road salt every winter. Buying four at once suits an older truck whose original sensors are all reaching the end of their battery life together.
Schrader is direct about the work involved. The listing says TPMS service is not a DIY product, and that a vehicle-specific relearn must be performed after installation using a TPMS programming and diagnostic tool with OBD capability. The year range also spans the 2019 split between the DT and the Classic, so check the Amazon fitment tool with your VIN before buying rather than relying on the model year alone.
View Schrader 29057 4-Pack on Amazon

3. A-Premium 68293199AA Replacement: 433 MHz Pre-Programmed Sensors, 4-Pack

- Listed for Ram 1500 2019-2024
- Replaces OE 68293199AA
- 433 MHz with aluminum valve
- CR2050 battery, FCC and IC certified
The A-Premium set is aimed squarely at the current-generation truck. The listing names the 2019 through 2024 Ram 1500 and gives 68293199AA as the reference number, so it covers the same position as the Mopar sensor above. All four sensors run at 433 MHz and fit the front and rear wheels.
Each sensor has a polyamide plastic body and an aluminum alloy valve, and the seller says the valve also works with OE rubber valves. Inside are an NXP chip and a CR2050 battery. The listing quotes an operating range of -40 to 120 degrees Celsius and a pressure range of 0 to 900 kPa, and says each unit is tested in-house to SAE J2657. The sensors carry FCC and IC certification and a two-year guarantee from the seller.
The seller is clear that pre-programmed does not mean automatic pairing. The sensors need no coding before installation, but the truck still has to learn them, and the listing points buyers to the owner’s manual for the reset steps. If the original sensors are around six years old or more, a full set like this saves paying for a second round of tire work when the next battery dies.
View A-Premium DT 4-Pack on Amazon
4. Hucigen Ram DS and Classic Sensors: 433 MHz Pre-Programmed, 4-Pack

- Listed for Ram 1500 2014-2018 and Classic 2019-2024
- Not for the DT Ram 1500
- 433 MHz, IP67 sealed
- Replaces 68157568AA and 68249197AA family
Plenty of the Ram 1500s on the road are the older DS design, either 2014 to 2018 trucks or the Classic models sold new through 2024. This Hucigen four-pack is listed for exactly those trucks, plus the Ram 2500 from 2014 to 2024 and the 2014 to 2018 Jeep Cherokee. The listing states plainly that it does not fit the DT Ram 1500.
It replaces a long list of OE numbers, including 68157568AA, 68157568AB, 68249197AA, 68324960AA and 68378369AB, which helps when you match against an old sensor. The seller quotes dual-axis sensing with accuracy of plus or minus 0.87 PSI, IP67 sealing against water and dust, and an operating range of -40 to 257 degrees Fahrenheit. Battery life is listed at five to eight years under normal driving, and each sensor is tested for signal and vibration before shipping.
The sensors arrive pre-programmed, so no cloning or coding is needed before installation. After fitting, the listing says to run the standard relearn from your owner’s manual and notes that some vehicles need a TPMS activation or relearn tool. The seller also offers to confirm fit from a VIN or OE number, a useful check on a 2019 or later truck.
View Hucigen DS and Classic 4-Pack on Amazon

5. CDWTPS Ram DS Sensors: 433 MHz Pre-Programmed Set of 4, 5-Lug Trucks

- Listed for 2014-2021 Ram 1500 DS (5-lug)
- Not for the 6-lug DT Ram 1500
- 433 MHz, replaces 68249197AA family
- CR2032 battery, tested before shipping
CDWTPS offers another four-pack for the older body style. The title lists 2014 to 2021 Ram 1500 trucks along with the Ram 2500 through 5500 and the Jeep Cherokee, and the feature notes extend the Ram 1500 DS range to 2022. Most usefully, the listing says these sensors suit 5-lug trucks and will not fit the 6-lug 2019 to 2022 DT, which gives owners a quick way to tell the two apart.
The set replaces 68249197AA and a run of related numbers, such as 68239720AA, 68157568AA and 68324960AA. Each sensor is tested before leaving the factory, runs at 433 MHz and uses a CR2032 battery that the seller says can last up to ten years of normal use. The listed temperature range runs from -40 to 125 degrees Celsius, and the seller backs the set with a one-year guarantee.
Setup is where this listing differs from the others. The seller says the sensors come pre-programmed for the listed trucks and register with the TPMS once the wheels are mounted and the truck has been test driven. Treat that as the seller’s claim, check your owner’s manual, and keep a TPMS tool or tire shop in mind if the warning light stays on after a drive.
View CDWTPS DS 4-Pack on Amazon
6. Autel MX-Sensor: 315/433 MHz Programmable TPMS Sensors, Set of 4

- 315 MHz and 433 MHz in one sensor
- Programmable only with Autel TPMS tools
- Cloneable: no relearn in the same position
- Rubber press-in valves, 11 g body
The Autel MX-Sensor works differently from every other option here. Instead of arriving set up for one truck, it is a blank universal sensor that covers both 315 MHz and 433 MHz, and Autel says it reaches about 99 percent of vehicles once programmed. The catch is that only Autel tools can program it, such as the TS408, TS508WF, TS608, TS900 and MS906TS listed by the seller.
For a Ram 1500 owner with one of those tools, the big advantage is cloning. The listing says the MX-Sensor can copy the ID of the original sensor, and that no relearn is needed when the clone goes into the same wheel position. That makes it a practical choice for a set of winter wheels, because the truck sees the same IDs whichever set is mounted.
This set uses rubber press-in valves, and each sensor body weighs about 11 grams. Autel says the sensors are tested to SAE J1205 and J1206 and carries a 24-month or 24,000-mile defect warranty, whichever comes first. Without a compatible Autel tool, though, these sensors cannot be programmed at home, so most owners without one are better served by a pre-programmed set above.
View Autel MX-Sensor 4-Pack on Amazon
Matching Each Sensor to Your Ram 1500
Use this table to narrow down the best TPMS sensors for Ram 1500 owners by body style, then confirm the part number on the listing. The fitment years are copied from each seller’s listing.
| Truck | OE number on listings | Sensors that match | Setup after install |
|---|---|---|---|
| 2019 and newer Ram 1500 (DT) | 68293199AA | Mopar 68293199AA, A-Premium 4-pack, Schrader 29057 (listed for select 2018-2025, so check by VIN) | Relearn per owner’s manual or a TPMS tool |
| 2014-2018 Ram 1500 (DS) | 68249197AA family | Hucigen DS set, CDWTPS set | Relearn; CDWTPS says a test drive registers them |
| 2019-2024 Ram 1500 Classic | 68249197AA family | Hucigen DS set, CDWTPS set | Same as the DS truck |
| Any of the above, Autel tool owners | Programmed to match | Autel MX-Sensor | Clone the old ID or relearn |

Relearn, Winter Wheels and Michigan Roads
Fitting the sensor is only half the job, because the truck has to accept each new ID. Bartec, a TPMS tool maker, groups the methods into three types on its TPMS relearn overview: stationary relearn with an activation tool, OBD relearn using an activation tool plus a scan tool, and auto learn, where driving the vehicle clears the light. Your Ram owner’s manual and the sensor maker’s instructions decide which one applies to your truck.
Many West Michigan Ram owners run a second set of wheels for winter. Each set needs its own four sensors, and the truck has to learn the IDs again at every seasonal swap unless the sensors are cloned. Programmable sensors that copy the summer IDs can save that step, as the Autel listing describes.

Cold weather also triggers plenty of false alarms. Tire pressure drops as temperatures fall, so the light on a frosty morning may simply mean the tires need air. Check all four with a reliable gauge, such as the ones in our tire pressure gauge buying guide, before blaming a sensor.
When the Warning Points Past the Sensor
Freeze-thaw season fills Grand Rapids streets with potholes, and a hard hit can bend a rim, cut a sidewall or snap a valve stem. If the TPMS light came on right after an impact, look for a slow leak first. Our guide to signs of pothole damage covers what to check on the tire and wheel.

A pull, a new clunk or an off-center steering wheel after that hit suggests bent or worn suspension parts. Our team handles suspension repair in Grand Rapids and can inspect the front end before a small problem wears out new tires.
More Buying Guides
Frequently Asked Questions
What frequency are Ram 1500 TPMS sensors?
Every Ram 1500 sensor set reviewed here is listed at 433 MHz, for both the DT and the DS or Classic trucks. The two families still use different sensors, so match the OE number as well as the frequency.
Do Ram 1500 Classic TPMS sensors fit the new body Ram?
No. The Classic shares its sensors with the 2014-2018 DS, while the 2019 and newer DT uses sensors that replace 68293199AA. Listings for each family say plainly that they do not fit the other.
Do pre-programmed sensors need a relearn on a Ram 1500?
Usually, yes. Pre-programmed means the sensor speaks the right protocol, not that the truck already knows its ID. Follow the relearn steps in your owner’s manual, and expect that some trucks or sensor brands will need a TPMS tool.
Do all four TPMS sensors need replacing together?
If the sensors are original and one battery has died, the others are often close behind, so a set of four saves repeat tire work. A single failure on newer sensors can be replaced on its own.
Did the tire light show up alongside a pull, a wobble or a knock from the front end? Give 456 AutoFix a call at 616-279-3832 on any weekday from 8am to 5pm, or request a suspension inspection through our contact page.
Working hours that clash with ours? Bring the Ram to 456 Carrier St NE, Grand Rapids, whenever it suits you and use the after-hours drop-off.
