456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Gateway Cables, AutoAuth and the Best Scan Tool for Ram Trucks

best scan tool for ram: mechanics beside a red semi truck in a shop

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Ram pickup carries dozens of control modules, and a basic code reader only talks to one of them. The best scan tool for Ram owners reaches the ABS, airbag, transmission and body modules too, and it has a plan for the security gateway that Ram fitted to most trucks from the 2018 model year on.

This guide explains that gateway first, then reviews six scanners that list Ram, Dodge, Jeep and Chrysler coverage. For the basics of how much tool you need, see our guide to choosing an OBD2 scanner for DIY mechanics.

Quick answer

Which scan tool works on a Ram truck?

Pick a full-system, bidirectional scanner with Chrysler group software and a gateway route for 2018 and newer trucks. The Foxwell NT530 and Launch Creader Elite 3.0 are built around Chrysler, Dodge and Jeep. The XTOOL IP500 bundle includes a 12+8 bypass cable, while the MUCAR 892BT supports FCA AutoAuth.

Our Quick Picks

Three quick picks by gateway route: a Chrysler group handheld, a cable bundle for 2018 to 2024 trucks and an AutoAuth tablet. All six are reviewed below.

Foxwell NT530 for Dodge Jeep Chrysler product photo
Chrysler group

Foxwell NT530 for Dodge Jeep Chrysler

Handheld · All systems · Active tests

Foxwell's Chrysler, Dodge and Jeep edition with service resets built in.

SuitsOwners of pre-2018 Rams or cable-equipped trucks
View on Amazon →
XTOOL IP500 for Jeep product photo
Cable included

XTOOL IP500 for Jeep

12+8 adapter · Jeep, Dodge, RAM

A Chrysler group scanner bundled with the bypass cable.

Suits2018 to 2024 Rams, no subscription
View on Amazon →
MUCAR 892BT product photo
AutoAuth

MUCAR 892BT

8 in tablet · 140+ brands

An all-makes tablet that unlocks the gateway through AutoAuth.

Suits2025+ Rams and multi-brand garages
View on Amazon →

The Security Gateway on 2018 and Newer Rams

From around the 2018 model year, Ram and the other FCA brands put a secure gateway module between the diagnostic port and the truck’s network. An aftermarket scanner can usually still read generic engine codes and live data through it. What gets blocked are the jobs that write to a module: clearing codes, running active tests, resets and relearns.

There are two ways around it. The first is a 12+8 bypass cable, which plugs into the gateway module’s harness behind the dash and gives the scanner a direct line to the network. The second is an AutoAuth account, a paid subscription that unlocks the gateway through the normal OBD2 port on scanners that support it.

AutoAuth describes its service as a way for technicians to use aftermarket diagnostic tools for secure functions through the OBD port that OEM security gateways may otherwise restrict. Owners on Ram forums report that the cable route works on many 2018 to 2024 trucks but that some 2025 and 2026 Ram 1500s have no reachable bypass point. On those, an AutoAuth-capable scanner is the safer bet, so confirm your exact year before you buy either.

What a Ram Scanner Needs to Cover

Beyond the gateway, the best scan tool for Ram work should offer:

  • Full-system access: engine, transmission, ABS, airbag and body modules, so a warning light on the dash can be traced to the module that set it.
  • Bidirectional control: the ability to command a fuel pump, cooling fan or ABS pump on so you can see whether the part responds.
  • Service functions: battery registration, electronic parking brake retract, steering angle reset and throttle relearn. Diesel owners should look for DPF regeneration and injector coding in the listing, and check that it applies to their year.
  • Updates: new model years arrive every fall, so free updates matter more than screen size.

Remember that a code is a starting point. Ram uses manufacturer-specific codes alongside the generic P-codes, much as other makers do; our article on common Audi fault codes shows how a single code can point to several different causes.

Best Scan Tool for Ram: Six Scanners Compared

The first three are built around Chrysler group vehicles; the last three are all-makes tools that list Ram, Dodge and Jeep coverage. Confirm your truck’s year, engine and gateway route with the seller before ordering.

1. Foxwell NT530 for Dodge Jeep Chrysler: All-System Scanner with Bidirectional Tests

Foxwell NT530 for Dodge Jeep Chrysler product photo
Key features
  • All-system diagnosis for Chrysler group vehicles
  • EPB, throttle, battery and DPF services
  • Bidirectional active tests
  • Full OBD2 modes on other makes

The Foxwell NT530 is sold in brand-specific editions, and this one is loaded with software for Chrysler, Dodge and Jeep vehicles, the group that Ram trucks share their electronics with. The listing describes it as an all-system tool, so it can reach the ABS, airbag, steering angle, transmission, power steering, TPMS, HVAC and keyless entry modules as well as the engine.

Its service menu is aimed at the jobs owners actually do at home. The listing names oil reminder reset, parking brake release for a brake job, throttle position reset, battery replacement, crankshaft sensor relearn and DPF regeneration, along with coding. Bidirectional control lets you trigger components for an active test instead of guessing from codes alone. A history feature saves the VIN and past sessions, so you don’t need to enter the truck’s details every time you plug in.

Outside the Chrysler group, the NT530 still runs all ten generic OBD2 modes on other 1996 and newer vehicles, including live data graphing and freeze frame. It does not list a bundled gateway cable, so on a 2018 or newer Ram you would add a 12+8 adapter for full access. For an older truck, or one that already has a cable, it is a focused and uncomplicated choice.

View Foxwell NT530 for Dodge Jeep Chrysler on Amazon

2. Launch Creader Elite 3.0 for Chrysler Dodge Jeep: Android Tablet with Full-System Diagnostics

Launch Creader Elite 3.0 for Chrysler Dodge Jeep product photo
Key features
  • Android 8.1, 2 GB RAM, 64 GB storage
  • Bidirectional control and active tests
  • DPF regen, injector coding, ABS bleed
  • AutoVIN for 2006 and newer models

The Launch Creader Elite 3.0 is a compact Android touchscreen scanner, and this edition is set up for Chrysler, Dodge and Jeep vehicles. Launch lists 2 GB of RAM, 64 GB of storage, a 3000 mAh battery with a power button and a removable USB cable. AutoVIN and a one-touch auto scan are listed for 2006 and newer models in the group, which saves time when you want a quick look at every module.

Diagnosis reaches the engine, transmission, ABS, body and steering angle modules, with code reading, clearing, live data, module information and freeze frame. Bidirectional control lets you command parts such as the EVAP solenoid, windows and wipers to confirm they respond. The listed service functions include oil reset, EPB, SAS, battery registration, throttle relearn, DPF regeneration, ABS bleeding, injector coding, air suspension calibration and gear learning.

Software updates over Wi-Fi are listed as free for the life of the tool, though Launch notes that extra vehicle brands can be bought separately. You can also email or print a vehicle report. The listing does not mention a bypass cable, so plan on a 12+8 adapter for gateway trucks, and check compatibility for your year, as Launch itself advises.

View Launch Creader Elite 3.0 for Chrysler Dodge Jeep on Amazon

Mechanic working at the front of a semi

3. XTOOL IP500 for Jeep: Chrysler Group Scanner with 12+8 Adapter for 2018+ Trucks

XTOOL IP500 for Jeep product photo
Key features
  • 12+8 adapter included for 2018+ FCA
  • Listed coverage for Jeep, Dodge, Chrysler and RAM
  • 30+ modules with active tests
  • 5.45 in screen, 32 GB, free updates

The XTOOL IP500 for Jeep is sold as a bundle that includes a 12+8 adapter, which is the main reason it belongs on a Ram list. Despite the name, the listing covers Chrysler, Dodge, Jeep and RAM vehicles, and it says the included cable gives direct diagnostic access to most 2018 and newer FCA models without an AutoAuth subscription.

XTOOL lists access to more than 30 control modules, including engine, transmission, ABS, airbag and battery, with live data shown as text or up to four graphs at once. Bidirectional tests let you run relays, actuators and sensors to confirm a fault. The listing mentions 18 special functions for 2018 and newer trucks, among them EPB reset, steering angle and battery calibration, headlight adjustment, injector coding and throttle matching, which XTOOL suggests for a rough-idling RAM.

Hardware includes a 5.45 inch touchscreen, a 3150 mAh battery and 32 GB of storage, with free lifetime updates. The cable has to be connected at the gateway module behind the dash, so expect some trim access the first time. Some of the newest trucks may not have a usable bypass point, so confirm your model year before relying on the cable.

View XTOOL IP500 for Jeep on Amazon

4. iCarsoft US V3.0: Button-Operated Scanner for Chrysler, Dodge, Jeep, Ford and GM

iCarsoft US V3.0 product photo
Key features
  • Covers Chrysler, Dodge, Jeep, Ford and GM
  • 39 service resets with active tests
  • ECU coding and CAN-FD support
  • 4 in screen with PC card-reader updates

The iCarsoft US V3.0 is a handheld scanner built for American brands, with Chrysler, Dodge and Jeep software alongside Ford and GM. That suits a driveway where a Ram shares space with a Silverado or an F-150. It uses a 4 inch screen and physical buttons rather than a touchscreen, which some owners prefer with cold or greasy fingers.

The listing describes full-system diagnosis of the engine, transmission, ABS and airbag modules, with live data in text or graphs. It names 39 service functions, including oil reset, EPB, battery management, throttle, steering angle, ABS bleeding, injector coding, TPMS and AdBlue, plus active tests such as fuel pump relay and cooling fan checks. ECU coding is listed for the Chrysler group, and CAN-FD support covers 2020 and newer Chrysler and GM models.

Updates are free and arrive through an included card reader and a PC, so the tool needs no Wi-Fi. The listing is direct about the gateway: Ram 1500 through 5500 trucks from after 2018 need a special adapter cable, which iCarsoft asks buyers to request. Factor that into the purchase if your truck is a recent one.

View iCarsoft US V3.0 on Amazon

Truck stop under a blue sky

5. MUCAR 892BT: 8 Inch Bidirectional Tablet with FCA AutoAuth and 35+ Services

MUCAR 892BT product photo
Key features
  • 8 in screen, Android 10, 4 GB/64 GB
  • FCA AutoAuth support for 2018+
  • 35+ services and ECU coding
  • CAN FD, DoIP and Bluetooth VCI

The MUCAR 892BT is an all-makes tablet that suits newer Rams because it supports FCA AutoAuth for 2018 and newer vehicles. That means the gateway is unlocked through the standard OBD2 port rather than a cable at the module. The listing is clear that an FCA account and membership fee are needed for that access, so budget for the subscription as well as the tool.

It runs Android 10 on an 8 inch screen with 4 GB of RAM and 64 GB of storage, and connects to the truck through a Bluetooth adapter. MUCAR lists full-system bidirectional diagnosis for more than 140 brands, covering TPMS, transmission, airbag, EPB, steering angle, body and engine modules. More than 35 service functions are listed, such as oil reset, gear learning, steering angle, injector coding, battery management and brake reset, along with ECU coding.

An AI assistant suggests possible causes for the codes it finds, which can help you plan the next test but does not replace checking the part. CAN FD and DoIP support helps with newer vehicles, and updates are free for life. It is a sensible pick for a 2025 or newer Ram, or a garage with several brands.

View MUCAR 892BT on Amazon

6. TOPDON ArtiDiag600 Pro: Full-System Scanner with FCA Gateway Access and DPF Regen

TOPDON ArtiDiag600 Pro product photo
Key features
  • Full-system diagnosis, 90+ brands
  • 9 core services incl. DPF regen
  • FCA secure gateway and CAN-FD support
  • 5 in HD screen, Android 11

The TOPDON ArtiDiag600 Pro is a compact all-makes scanner that replaces the earlier AD600 and AD500. TOPDON lists coverage for more than 90 brands built from 1996 on, including pickup trucks, light-duty trucks and 12V diesels, a range that takes in Ram pickups. It scans every available system, including engine, transmission, ABS, body control and airbag.

Nine core services stay free for the life of the tool: ABS bleeding, battery matching, brake reset, oil reset, DPF regeneration, throttle relearning, injector coding, steering angle reset and TPMS reset. A 30-day trial adds 21 more functions, which then lock again. For a Cummins or EcoDiesel owner, having DPF regeneration and injector coding in the permanent list is useful, though availability varies by truck.

The listing names support for the FCA secure gateway and CAN-FD, with a note that some protocol access may need an extra purchase or subscription. Hardware is a 5 inch 1280 by 720 touchscreen on Android 11 with 2 GB of RAM and 32 GB of storage, and updates come over Wi-Fi. Live data can show four streams at once. Send TOPDON your VIN to confirm coverage first.

View TOPDON ArtiDiag600 Pro on Amazon

Matching a Scanner to Your Ram

Model year and gateway route decide most of this. Use the table as a rough guide, then check the seller’s compatibility list for your VIN.

Your RamGateway routeScanners to look at
2017 and olderNone neededFoxwell NT530, iCarsoft US V3.0
2018 to 2024, home use12+8 cableXTOOL IP500 bundle, or another pick plus a cable
2025 and newerAutoAuth accountMUCAR 892BT, TOPDON ArtiDiag600 Pro
Mixed fleet with Jeep or DodgeEitherLaunch Creader Elite 3.0, MUCAR 892BT
Narrowing down the best scan tool for Ram trucks by model year and gateway route. Routes vary by truck, so confirm before buying.
Trucks parked in black and white

A 2500 or 3500 with the Cummins brings extra modules for the exhaust aftertreatment system. If DPF regeneration matters to you, check that the listing names it and that the seller confirms it for your year, since diesel coverage changes more between model years than gas engine coverage does.

Ram Ownership Through a West Michigan Winter

Road salt and slush are hard on the wiring under a pickup. Corroded connectors at wheel speed sensors and trailer plugs set intermittent codes that come and go with the weather, and freeze frame data shows when each one appeared.

Pickup spinning its tires in smoke

Cold mornings show up too: a diesel with two tired batteries can log low-voltage faults in several modules after a weak start, so sort the battery before clearing them. If the light is on but the truck drives normally, read our guide on a check engine light that is on while the car runs fine before you clear anything.

When the Scanner Isn’t Enough

A scan tool tells you which module is unhappy, not always why. Repeating misfire codes, a flashing check engine light or a code that returns right after clearing usually needs testing with a meter, smoke machine or wiring diagram. That’s where a professional diagnosis pays off.

Large tires stacked outdoors

Our check engine light diagnosis in Grand Rapids traces the fault behind the code on foreign and domestic vehicles, and we also handle body and engine electrical repair when the problem is in the wiring rather than a part.

Frequently Asked Questions

Can a basic code reader work on a 2019 or newer Ram?

Usually it can read generic engine codes and live data. Clearing codes, active tests and resets are typically blocked without a 12+8 cable or an AutoAuth login.

Do I need a 12+8 cable or AutoAuth for my Ram?

Most 2018 and newer Rams need one or the other for full access. The cable is a one-time purchase that works on many 2018 to 2024 trucks, while AutoAuth is a yearly subscription that works through the OBD2 port on supported scanners.

What is the best scan tool for Ram diesel trucks?

Look for a full-system tool whose listing names DPF regeneration and injector coding, such as the Foxwell NT530, Launch Creader Elite 3.0 or TOPDON ArtiDiag600 Pro. Diesel functions vary by year, so confirm them for your Cummins or EcoDiesel before buying.

Will a Ram scanner also work on my Jeep or Dodge?

The Chrysler group tools here cover Ram, Dodge, Jeep and Chrysler, and the all-makes tools cover many other brands as well. Each one still reads standard OBD2 data on other 1996 and newer vehicles.

Got a warning light on your Ram that a scanner can’t explain? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or schedule a diagnostic visit through our contact page.

Working the same hours we do? Park the truck at 456 Carrier St NE in Grand Rapids after we close and use the after-hours drop-off.