456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Finding the Best Spark Plug Socket for Your Engine’s Plugs

best spark plug socket: picturesque scene of stacked hay bales in a sunny

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A plug change goes smoothly or badly based on one small tool. The best spark plug socket for your car matches the hex on your plugs, reaches the bottom of the plug well, and holds the plug so it doesn’t drop or crack on the way in or out.

Below we explain plug sizes and socket types, then review five single sockets and one small set. If you are building a toolbox from scratch, our guide to the best mechanic tool set covers the ratchets and extensions these sockets need.

Quick answer

Which spark plug socket should you buy?

Buy the size your plugs use first. Most modern engines take 5/8 inch (16 mm), where a magnetic swivel like the GEARWRENCH 80546 works well. Many BMW, MINI and Nissan engines need a 14 mm 12-point thin wall socket. For a mixed driveway, a small set such as the TEKTON SHD91004 covers four sizes.

Our Quick Picks

Three starting points: a 5/8 inch magnetic swivel for most modern engines, a 14 mm 12-point thin wall socket for many BMW, MINI and Nissan engines, and a four-size set for a mixed driveway. All six picks are reviewed below.

GEARWRENCH 80546 product photo
5/8 inch swivel

GEARWRENCH 80546

5/8 inch · 6 inch long · 3/8 inch drive

A magnetic swivel socket for the most common modern plug size.

SuitsCoil-on-plug engines with angled or tucked plugs
View on Amazon →
EWK 14mm Thin Wall product photo
14 mm 12-point

EWK 14mm Thin Wall

14 mm · 12-point · 3/8 inch drive

A thin wall magnetic socket for slim bi-hex plugs.

SuitsMany BMW, MINI, Nissan and Infiniti engines
View on Amazon →
TEKTON SHD91004 product photo
Four-size set

TEKTON SHD91004

4 sockets · 5/8 to 13/16 inch, 14 mm · 3/8 inch drive

Common plug sizes in one small kit with rubber grommets.

SuitsHouseholds with several cars or small engines
View on Amazon →

What Socket for Spark Plugs? Start With the Hex

The best spark plug socket is simply the one that matches your plug’s hex. Your owner’s manual or the plug maker’s catalog gives the part number and size.

  • 5/8 inch (16 mm): the size on a large share of modern gasoline engines, often with coil-on-plug ignition and deep, narrow wells.
  • 13/16 inch: common on older engines and many small engines with larger plugs.
  • 14 mm 12-point: a slim bi-hex plug used on many BMW, MINI, Nissan and Infiniti engines, which needs a 12-point thin wall socket.

Never force a socket that is a size off; a loose fit rounds the hex.

Magnet, Rubber, Swivel or Thin Wall?

A rubber grommet grips the porcelain gently, but it can stay on the plug or harden with age. A magnet grips the steel shell and lets go cleanly, though it can attract metal grit.

A built-in swivel reaches plugs set at an angle, but it can flop while starting threads, so start each plug by hand. Thin walls matter in narrow wells, where a standard socket binds.

One firm rule: spark plug sockets are hand tools. Use them on a ratchet or a torque wrench, never on an impact gun. For wheels and chassis bolts, an impact socket set is the right kit.

Best Spark Plug Socket Choices, Size by Size

Specs below come from each maker’s Amazon listing. Check your plug hex and well depth before ordering.

1. GEARWRENCH 80546: 5/8 Inch x 6 Inch Magnetic Swivel Spark Plug Socket, 3/8 Inch Drive

GEARWRENCH 80546 product photo
Key features
  • 5/8 inch, 6-point opening
  • Built-in swivel for angled plugs
  • Magnetic insert plus rubber centering insert
  • Off-corner loading to reduce rounding

The GEARWRENCH 80546 is a single 5/8 inch spark plug socket with a swivel joint built into its 6 inch body. It fits a 3/8 inch square drive, so it works with an ordinary ratchet, an extension or a torque wrench. The 5/8 inch size matches the plugs in a large share of modern gasoline engines, which makes this one of the more useful single sockets to keep in a drawer.

GEARWRENCH lists two ways it holds a plug. A magnetic insert grips the steel shell for removal and installation, while a rubber insert protects the plug and keeps the socket centered on it. The 6-point opening uses off-corner loading, which pushes on the flats of the hex rather than the corners and helps prevent rounding on a plug that has been in place for years.

The swivel is the main reason to choose it. On V6 and V8 engines, or where a plug sits behind a coil bracket or intake runner, the joint lets the ratchet work at an angle instead of fighting the surrounding parts. On a straight, open plug well a swivel can flop while you start the threads, so start each plug by hand first. It is not made for 14 mm bi-hex or 13/16 inch plugs.

View GEARWRENCH 80546 on Amazon

2. LEXIVON LX-122: 5/8 Inch Swivel Magnetic Spark Plug Socket, 10 Inch Total Length

LEXIVON LX-122 product photo
Key features
  • 5/8 inch thin wall socket
  • 10 inch total length, 3/8 inch drive
  • 360 degree ball swivel and magnetic core
  • Chrome vanadium steel, laser-etched size

LEXIVON’s LX-122 is a 5/8 inch swivel spark plug socket with a long reach: the listing gives a total length of 10 inches on a 3/8 inch drive. That length is the point of this tool. Some engines hide their plugs at the bottom of deep tubes, and a long one-piece socket can reach them without stacking extensions that wobble and make it harder to start the threads.

The socket has a thin wall to fit narrow wells, a magnetic core that holds the plug, and a 360 degree ball swivel for plugs that sit at an angle. LEXIVON makes it from heat-treated chrome vanadium steel with a polished chrome finish that resists corrosion and wipes clean. The shaft is knurled so it doesn’t slip in your fingers, and the size is laser-etched. The maker says it meets ANSI standards and carries a lifetime limited warranty.

This suits someone whose engine has deep plug tubes or who wants one socket that reaches most 5/8 inch plugs without an extension. On engines with shallow, open wells, the length can be more than you need, and the shorter LX-121 version or a fixed socket may be easier to handle. Like any magnetic socket, keep it clean so it doesn’t drag metal grit toward the plug well.

View LEXIVON LX-122 on Amazon

dramatic road view under a wide sky

3. CRAFTSMAN CMMT43324: 5/8 Inch Spark Plug Socket, 3/8 Inch Drive, 6-Point

CRAFTSMAN CMMT43324 product photo
Key features
  • 5/8 inch, 6-point opening
  • 3/8 inch square drive
  • Full polish chrome finish
  • Large size markings, ASME rated

The CRAFTSMAN CMMT43324 is a plain, fixed 5/8 inch spark plug socket for a 3/8 inch drive. There is no swivel and no long shaft, which is exactly why some people prefer it. On engines where the plugs sit straight down in reasonably open wells, a rigid socket on an extension is steadier than a swivel and gives a better feel for when the threads catch.

CRAFTSMAN describes a 6-point opening for better grip and torque transfer, a full polish chrome finish that resists corrosion, and large size markings that are easy to read in a dim garage. The maker says it meets or exceeds ASME specifications and backs it with a full lifetime warranty. The listing doesn’t say how the socket retains the plug, so check the product photos and questions on Amazon if a magnet or rubber insert matters to you.

This is a sensible choice if you have one car with 5/8 inch plugs and good access, or if you already own a swivel and want a fixed partner for straight wells. It will need an extension for deep tubes, and it is not the right tool for angled plugs tucked behind an intake. If your plugs use a different hex, pick another size from the CRAFTSMAN range or one of the sets in this guide.

View CRAFTSMAN CMMT43324 on Amazon

4. EWK 14mm 12-Point Thin Wall Magnetic Spark Plug Socket, 3/8 Inch Drive Deep Well

EWK 14mm Thin Wall product photo
Key features
  • 14 mm, 12-point bi-hex opening
  • Ultra-thin wall, deep well design
  • Embedded magnet holds the plug
  • Chrome vanadium steel, mirror finish

The EWK 14 mm socket is made for the slim 12-point bi-hex plugs found on many European and Japanese engines. A regular 14 mm socket has walls too thick for the narrow plug wells these engines use, and a 6-point opening won’t fit the plug’s 12-point hex. This socket pairs a 12-point opening with an ultra-thin wall and a deep well so it can reach the plug.

EWK’s listing names a long list of engines, including 2007 and later BMW turbo engines such as the N54, N55, N20, B48 and B58, MINI Cooper R55, R56, R57 and R60 models, the Nissan 350Z and 370Z, and Infiniti V6 models such as the G35 and G37. Instead of a rubber retainer, it uses an embedded magnet to hold the plug, which avoids the problem of a rubber insert staying behind on the plug. It is made from chrome vanadium steel with a mirror-polished finish.

This is the socket to buy if your engine uses 14 mm bi-hex plugs, and the one most owners asking about a BMW spark plug socket need. Confirm your plug part number before ordering, since plug types vary between engines, even within one brand. It has no swivel, so pair it with a wobble or universal extension if a plug sits at an angle.

View EWK 14mm Thin Wall on Amazon

detailed monochrome image of vintage industrial pressure gauges with metal pipes

5. SUNEX 884504: 16mm 6-Point Thin Wall Spark Plug Socket, 3/8 Inch Drive, Cr-Mo Steel

SUNEX 884504 product photo
Key features
  • 16 mm, 6-point opening
  • Thin wall for narrow wells
  • Chrome molybdenum steel, black phosphate
  • Laser-etched size markings

SUNEX’s 884504 is a 16 mm, 6-point thin wall spark plug socket on a 3/8 inch drive. It answers a common question about the 16 mm spark plug socket vs 5/8: the two sizes are almost the same, but a socket with a thin wall like this one can slide into a narrow plug well where a thicker 5/8 inch socket rubs or stops short of the plug.

The socket is made from chrome molybdenum alloy steel with a black phosphate finish that resists corrosion. Its 6-point geometry presses on the flats of the hex to reduce rounding and transfer torque cleanly. Sizes are laser-etched so you can read them in poor light, and SUNEX says it meets or exceeds ANSI and ASME standards, with a lifetime warranty. SUNEX lists it for use with hand ratchets and breaker bars, so keep it off an impact gun.

This suits engines with 16 mm plugs set deep in tight wells, and anyone who has found their regular 5/8 inch socket too fat for the job. The listing doesn’t describe a magnet or rubber insert, so plan on a magnetic pickup tool or a length of hose to lift the plug out and start the new one. It is a single fixed socket, so angled plugs will need a universal joint.

View SUNEX 884504 on Amazon

6. TEKTON SHD91004: 4-Piece 3/8 Inch Drive Spark Plug Socket Set, 5/8, 3/4, 13/16 Inch and 14mm

TEKTON SHD91004 product photo
Key features
  • Four sizes: 5/8, 3/4, 13/16 inch and 14 mm
  • Thin walls and extended length
  • Rubber grommet grips the plug neck
  • Radiused 6-point corners, stamped markings

The TEKTON SHD91004 is a compact spark plug socket set with four 3/8 inch drive sockets: 5/8, 3/4 and 13/16 inch, plus 14 mm. That spread covers the most common plug sizes on cars and many small engines, so it suits anyone who looks after more than one engine and doesn’t want to buy a new socket each time a plug size changes.

TEKTON gives the sockets thin walls and extended length to reach down into spark plug wells. Inside each one, a rubber grommet grips the neck of the plug for careful removal and installation. The 6-point openings have radiused corners that push on the flat sides of the hex rather than the corners, which helps protect the plug. Sizes are roll-stamped into the steel, so the markings won’t wear off like a printed label.

This is a good spark plug socket kit for a household with a modern car, an older truck and a mower or snowblower. The 14 mm socket here is a 6-point design, so check whether your engine’s 14 mm plugs are a 12-point bi-hex type before relying on it. The sockets are fixed, with no swivel, and the rubber grommets can occasionally stay on a plug, so check inside the well after each removal.

View TEKTON SHD91004 on Amazon

16mm Spark Plug Socket vs 5/8 and Other Size Questions

A 5/8 inch socket measures about 15.9 mm, so the two are effectively the same size, and plug makers list that hex as 5/8 inch (16 mm). The real difference is wall thickness: a thin wall 16 mm socket fits narrow wells where a regular 5/8 binds.

SocketSizeHolds the plug withSuits
GEARWRENCH 805465/8 inch, 6-pointMagnet and rubber insertAngled or tucked plugs
LEXIVON LX-1225/8 inch, 10 inch longMagnetVery deep plug wells
CRAFTSMAN CMMT433245/8 inch, 6-pointNot stated in listingA plain, straight socket
EWK 14 mm14 mm, 12-pointMagnetMany BMW, MINI and Nissan engines
SUNEX 88450416 mm, 6-point thin wallNot stated in listingNarrow 16 mm wells
TEKTON SHD910045/8, 3/4, 13/16 inch, 14 mmRubber grommetHouseholds with mixed engines
Spark plug sockets in this guide compared by size and retention

Spark plug wrench or socket? One-piece plug wrenches suit lawn mowers. On a car, the best spark plug socket on a 3/8 inch ratchet gives reach, control and a way to use a torque wrench.

curved road through open fields with a dramatic stormy sky above

Changing Plugs Without Damaging the Threads

The socket is only half of a clean plug change. NGK’s spark plug installation guide says to work on a cool engine, clean the plug holes first, and tighten to the torque listed for the plug’s seat type and the head material. Too little torque lets the plug run hot, and too much can stretch the shell or crack the threads.

  1. Blow out the wells: compressed air clears grit first; wear safety glasses.
  2. Start by hand: thread each plug by hand or with a short hose to avoid cross-threading.
  3. Torque it: set a torque wrench to the figure for your plug.
tranquil dirt road winds through a lush

Plugs on older engines that sat through many West Michigan winters can come out stubborn. If one feels tight all the way out, stop and add penetrating oil. Our guide to anti-seize for spark plugs covers when a thin coat helps, and a DIY torque wrench takes the guessing out of the final turn.

Some trucks and vans give better access to rear plugs with a front wheel off. Lift with a jack from our floor jack value picks and always set jack stands before you reach in.

winding coastal road with a stunning view of the distant island under a clear sky

When a Plug Change Belongs at a Shop

Even the best spark plug socket can’t free a plug that has seized in an aluminum head or snapped off in the bore. Plugs under an intake manifold, or a misfire that returns after new plugs, are shop jobs too.

We replace plugs as part of factory scheduled maintenance in Grand Rapids, and a flashing light or rough idle goes through our check engine light diagnostic to find whether the plug, coil or something else is at fault.

Frequently Asked Questions

What is the best spark plug socket for a BMW?

Many BMW engines use slim 14 mm bi-hex plugs, so they need a 14 mm 12-point thin wall socket, such as the EWK listed above. Some older BMW engines use other plugs, so check the plug part number for your exact engine before buying.

Is a swivel spark plug socket worth it?

It is when your plugs sit at an angle or behind other parts, because the joint lets the ratchet work off-line. On straight, open wells a fixed socket is steadier and easier to start the threads with.

Should I buy a spark plug socket set or a single socket?

A single socket in the right size is enough if you look after one car. A small set makes more sense when your household has several engines, or older equipment with 13/16 inch plugs alongside newer 5/8 inch ones.

Can I use a regular deep socket on spark plugs?

Sometimes it reaches, but a regular deep socket has no insert or magnet to hold the plug, and its thicker wall may not fit the well. You risk dropping the plug or cracking the insulator, so a proper spark plug socket is the safer choice.

Rather leave the plugs to someone else? Phone 456 AutoFix at 616-279-3832 any weekday from 8am to 5pm, or reach us through the contact page to book a time.

Working days keep you busy? Our after-hours drop-off at 456 Carrier St NE, Grand Rapids, means the car can be waiting for us when the shop opens.