As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Audi has used more than one oil filter design over the years, so ordering by model name alone is an easy way to end up with a filter that does not fit. The best oil filter for Audi models is simply a quality filter from a known maker that matches your exact engine, whether that is a 2.0T in an A4 or Q5 or a V6 in a Q7.
Below are the filter styles, then six filters by engine type. For the wider picture across brands, our guide to choosing an oil filter brand covers that ground.
Quick answer
Which oil filter should go in your Audi?
Start with the style your engine uses. Many later 2.0T engines take a paper cartridge such as the Purolator PL21478 or WIX WL10396, several 2.0T years use a spin-on can like the Bosch 72254WS, and many V6 and V8 cars take a cartridge like the Bosch 3481. Confirm the part number for your VIN.
Our Quick Picks
Three quick picks for the three filter setups Audi uses most: 2.0T cartridge, 2.0T spin-on and the larger engines. All six are reviewed below.

PurolatorONE PL21478
A widely listed cartridge for the common 2.0T housing, with a treated gasket.

Bosch 72254WS
A steel spin-on can listed for many 2009-2017 Audi four-cylinder models.

Bosch 3481
Bosch's cartridge for many Audi six- and eight-cylinder models.
Three Filter Styles Under an Audi Hood
Before brand names matter, know which kind of filter your engine was built around. Audi listings fall into three groups.
- Cartridge elements: a pleated paper or synthetic element with no metal can. It sits in a housing under a screw-on cap sealed by an O-ring. Many later 2.0T, V6 and V8 engines use one.
- Spin-on cans: a sealed steel can that threads onto a mount. Several 2.0T years in the A4, A5, Q5 and Q3 use one, as do some recent 2.0L engines.
- Engine-specific elements: some performance and V6 engines use their own cartridge size, even when the car shares a model name with a 2.0T.
So “fits Audi A4” on a box is not enough. A 2010 A4 and a 2020 A4 can take different filters, and an S4 differs again.
Finding the Right Part Number for Your Car
The surest route is the part number. Audi part numbers for the common 2.0T cartridge start with 06L or 06K, and retailers often list 06L115562 and 06L115466 as interchangeable. The older spin-on style used a different number entirely, so look at the old filter or its box before you order.
- Check the old filter: a cartridge sits in a housing with a plastic or aluminum cap, while a spin-on is a painted metal can.
- Use the fit checker: enter year, model and engine on Amazon or in the maker’s catalog.
- Know the engine code: it separates a 2.0T from a 3.0T or a V8.
- Count the seals: a cartridge needs a new cap O-ring each time, so make sure one comes in the box.
The oil matters too: our guide to oil for Audi 2.0T engines explains the approval numbers to look for.
Best Oil Filter for Audi: Six Filters by Engine Type
Each listing below names specific Audi models and years. Treat those lists as a starting point and confirm year, engine and trim with Amazon’s fit checker or the maker’s catalog, because no single listing fits every Audi.
1. PurolatorONE PL21478: Synthetic Blend Cartridge Filter for Audi Q5, Q3, Q7 and A3

- Metal-free cartridge element
- High-density synthetic blend media
- PTFE-treated gasket
- Rated for up to 15,000 miles
The PurolatorONE PL21478 is a cartridge element, the kind that drops into a housing on the engine instead of threading on as a sealed can. Its Amazon listing names the Audi Q5, Q3, Q7 and A3 along with several Volkswagen models and the Porsche Macan, which points to the shared four-cylinder housing these brands use. As always, run your own year and engine through the fit checker, because a Q5 from one model year can take a different filter than one from another.
Purolator builds the element from a high-density synthetic blend media and says it keeps an engine clean for up to 15,000 miles, capturing more than 99 percent of dirt. The gasket is PTFE treated, which Purolator describes as heat resistant and flexible so it seals without sticking. There are no metal parts in the element, so the used one is lighter waste than a spin-on can, and the housing on the engine is what does the structural work.
For a DIY owner, the change is mostly about the cap. Remove it with the right socket, swap the element and seal, and tighten the cap to the specified torque rather than by feel. Mileage claims aside, change it at your Audi’s oil service interval, not on the box’s number.
View PurolatorONE PL21478 on Amazon
2. WIX WL10396: Top-Mounted Cartridge Filter for Audi, VW and Porsche

- Top-mounted cartridge design
- 99% efficiency at 26 microns (WIX test)
- Up to 15,000 miles
- Tool-free element swap
The WIX WL10396 is a cartridge element that its Amazon listing describes as compatible with Audi, Porsche and Volkswagen models from roughly 2012 to 2020. WIX calls it a top-mounted cartridge, meaning it sits in a housing you reach from above the engine rather than from underneath. That layout suits owners who already do topside oil changes, because the filter and the oil can both be handled without lifting the car.
WIX says its blended media traps dirt at 99 percent efficiency at 26 microns, a figure it notes comes from testing on a related WIX part. The company also says the filter meets or exceeds the original equipment change intervals and lasts up to 15,000 miles. It is designed for severe use such as stop-and-go traffic, towing and dusty roads, which covers a lot of everyday winter driving around town.
Because only the element is replaced, there is less waste than with a full spin-on can. The listing does not give a full vehicle chart in its text, so treat it as a filter you confirm before buying. Enter your year, model and engine in Amazon’s part finder, or compare the number on your old element. If the old filter is a metal can, this is the wrong style for your car.

3. K&N HP-7038: High-Flow Cartridge Filter for 2009-2023 Audi Models

- Cartridge element
- High-efficiency media with uniform pleats
- Built for high oil flow
- Made for synthetic motor oil
The K&N HP-7038 is a cartridge filter from K&N’s performance range, listed on Amazon as compatible with 2009 to 2023 Audi, Porsche and Volkswagen models. Retail fitment lists for this part commonly include the A3 and other four-cylinder Audis, and K&N cross-references it to the common Audi cartridge part numbers. The exact list depends on engine, so check your year and engine code before ordering.
K&N describes the filter as having high-efficiency media with uniform pleats, designed to allow high oil flow rates. Even, evenly spaced pleats help the oil pass through the whole surface of the element rather than one patch of it. The company positions it for high-end synthetic motor oil, which is what most modern Audi engines call for anyway, so it fits naturally into a routine built around a full synthetic that meets Audi’s approval.
The listing makes fewer specific claims than some rivals, with no stated efficiency figure or mileage rating in its bullet points. That is not a reason to avoid it, but it does mean the choice comes down to brand preference and fit. If you already use K&N parts or prefer a performance brand on a turbocharged engine, it is a straightforward option. Follow your Audi’s service interval and torque the housing cap to spec when you change it.
4. Bosch 72254WS Workshop: Spin-On Filter for 2009-2016 Audi A4 and 2011-2017 Q5

- Screens up to 97.5% of harmful particles
- Holds up to 13 grams of dirt
- High-strength steel baseplate and housing
- Synthetic rubber anti-drainback valve
The Bosch 72254WS is a spin-on filter from the Bosch Workshop line, and its listing covers a long run of Audis that use a can instead of a cartridge. Named models include the 2009-16 A4 and A4 Quattro, 2010-17 A5 Quattro, 2011-17 Q5, 2015-18 Q3 and Q3 Quattro, several A3 and TT years, and a list of Volkswagen models. Bosch itself notes that trim level and engine can change fitment, so the fit checker is still worth a minute.
Bosch says the filter screens up to 97.5 percent of harmful particles and can hold up to 13 grams of dirt. The baseplate and housing are high-strength steel, which Bosch says prevents the warping that can cause leaks in thinner filters. A synthetic rubber anti-drainback valve keeps oil in the filter while the engine is off, so oil reaches the bearings quickly on a cold start.
The gasket is a high-lubricity synthetic rubber designed to seal firmly but come off without a fight next time. On a spin-on, wipe the mount clean, oil the new gasket and tighten it by hand as the filter instructions direct. For a B8-era A4 or first-generation Q5 owner looking for the best oil filter for Audi spin-on setups, it is a widely listed option.

5. FRAM Ultra Synthetic XG11784: Dual-Layer Spin-On Filter for Synthetic Oil

- Dual-layer synthetic media, 99%+ efficiency
- Silicone anti-drainback valve
- SureGrip non-slip surface
- Up to 20,000 miles with synthetic oil
The FRAM Ultra Synthetic XG11784 is a spin-on filter in the 11784 size, which FRAM’s Extra Guard listing for the same number names for recent Audi Q5 2.0L and Volkswagen Tiguan models. Newer engines in this family moved back to a spin-on can, so an owner who assumes every modern Audi takes a cartridge can order the wrong part. Confirm that 11784 is the right number for your year and engine before buying.
FRAM says the dual-layer synthetic media delivers more than 99 percent filtration efficiency, and the company’s product page describes that figure as coming from testing under the ISO 4548-12 standard for particles larger than 20 microns. A silicone anti-drainback valve is rated for up to three times the hot oil resistance of a nitrile valve, and the gasket is a high-temperature nitrile. FRAM rates the filter for up to 20,000 miles with a suitable synthetic oil, while telling owners to follow the interval in their manual.
The SureGrip textured surface makes the can easier to turn by hand, which helps when it sits in a tight spot. To install, clean the base, oil the gasket, and spin the filter on until the gasket contacts, then tighten per the markings.
View FRAM Ultra Synthetic XG11784 on Amazon
6. Bosch 3481 Premium: FILTECH Cartridge Filter for Audi Q7, S4, A6 and A8

- FILTECH natural and synthetic media
- Holds up to 14 grams of dirt
- Fits like the original cartridge
- O-ring included when OE specifies
The Bosch 3481 Premium is a cartridge filter listed for a different group of Audis than the 2.0T filters above. Its Amazon listing names the 2011-15 Q7, 2009-17 Q5, 2010-16 S4, 2010-17 S5, A6, A7 and A8 Quattro years, the 2013-18 S6, S7 and S8, the 2014-18 RS7 and the 2014-17 SQ5. Many of those are six- and eight-cylinder cars, but the listing is written by model and year, so a Q5 with the four-cylinder may need a different filter.
Bosch’s FILTECH media blends natural and synthetic fibers, and the company says it captures and holds up to 14 grams of dirt and particles. Bosch also states that its cartridge filters are engineered to fit exactly like the original equipment element, with an O-ring included when the original design calls for one. That detail matters on a cartridge housing, where the seal is what keeps oil inside.
This is a filter for owners who have already confirmed their engine code, not a part to order by model name alone. Swap the element and seal together, tighten the cap to the specified torque, and check for leaks after a short run. It suits a Q7, S4 or A6 that is serviced at home.
Which Filter Style Your Audi Likely Uses
The table sums up the listings above. It narrows the search for the best oil filter for Audi models, but it is not a fitment chart, so confirm the part for your VIN.
| Filter style | Audi models named in the listings | Filters in this guide | What to check |
|---|---|---|---|
| Spin-on can | 2009-16 A4, 2011-17 Q5, 2015-18 Q3 | Bosch 72254WS | Gasket seated, can tightened by hand |
| Spin-on can, newer 2.0L | Recent Q5 2.0L (11784 size) | FRAM XG11784 | The 11784 number for your year |
| Cartridge, 2.0T | Q5, Q3, Q7, A3 and others | Purolator PL21478, WIX WL10396, K&N HP-7038 | New cap O-ring, cap torque |
| Cartridge, V6 and V8 | 2011-15 Q7, S4, S5, A6, A8 | Bosch 3481 | Engine code, O-ring in the box |

A note on the cap. Cartridge housings use a plastic or aluminum cap that is tightened to a set torque, and overtightening can crack it or pinch the O-ring. FRAM’s installation steps for its Ultra Synthetic filters also say to clean the mounting base and make sure the old gasket is not stuck to it, which applies to any spin-on filter.
Cold Starts, Short Trips and Michigan Oil Changes
West Michigan winters are hard on oil. Short trips in freezing weather never let the engine fully warm up, so moisture and fuel collect in the oil. A filter rated for long intervals is only as good as the schedule you keep.
Follow the interval in your owner’s manual or the car’s service reminder, and shorten it if most of your driving is short hops in the cold. Our article on how often to change oil in a Michigan winter walks through the reasoning. Pair the filter with a suitable oil, too: our guide to the motor oil for cold weather explains viscosity on cold starts.

Some 2.0T engines also use oil between changes, so watch the level and read about Audi 2.0T oil consumption. A new filter will not cure an engine burning oil.
When to Let a Mechanic Handle It
A filter change is a fair DIY job with the right cap socket, a torque wrench and a way to recycle used oil. Hand it off if the cap is stuck or cracked, if you find metal in the old element, or if an oil warning comes on after a change. In that last case, stop driving and read our guide to an oil pressure light coming on.

Our oil change service in Creston fits the filter and oil your engine calls for, and Hendrick is Audi factory trained. For anything beyond routine service, see our Audi repair in Grand Rapids.
More Buying Guides
Frequently Asked Questions
Does my Audi use a cartridge or a spin-on oil filter?
It depends on the year and engine. Many later 2.0T engines and most V6 and V8 engines use a cartridge in a housing, while several 2.0T years and some recent 2.0L engines use a spin-on can. Look at the old filter or check the part number for your VIN.
What is the best oil filter for Audi Q5 models?
Match the filter to your Q5’s year and engine first. The Bosch 72254WS listing names 2011-17 Q5 models, the Purolator PL21478 cartridge lists the Q5, and the FRAM 11784 size is listed for recent Q5 2.0L models. Confirm the fit before buying.
Do I need a new O-ring with a cartridge filter?
Yes. The cap O-ring seals the housing, and an old one can leak once it has been compressed and heated. Most quality cartridge filters include the O-ring, but check the box before you start.
Can an aftermarket filter replace the Audi factory part?
A quality aftermarket filter built to the same part number does the same job. Keep your receipts and records of the oil and filter used, and read our article on whether independent service affects your Audi warranty if that is a concern.
Due for an oil change on your Audi in Grand Rapids? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a visit through our contact page.
Short on time during the week? Our after-hours drop-off is there for you. The shop sits at 456 Carrier St NE, in Grand Rapids’ Creston neighborhood.
