As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Honda usually tells you its rotors are done through the pedal: a light pulse at highway stops, a lip you can feel on the outer edge, or a pad job where the old discs are too thin to reuse. The best rotors for Honda models are the ones built to the right diameter for your exact car, because a Civic LX, a Civic Si and an Accord Sport from the same year can all take different parts.
This guide covers the rotor styles that make sense on a Honda, how to check fit before you order, and six listings tied to the Civic, Accord, CR-V, Pilot and Odyssey. For a wider look at rotors on every make, read our guide to choosing brake rotors.
Quick answer
Which rotors should a Honda owner buy?
Pick an OE-style vented rotor listed for your model, year and trim, ideally with a rust-resistant coating. The Bosch QuietCast 53011452 suits 2016 to 2023 Civics, the Wagner ES BD180726UC names the 2017 to 2019 CR-V, and the Raybestos Element3 980566FZN covers the 2009 to 2015 Pilot. Replace rotors in axle pairs.
Our Quick Picks
Three listings that cover the most common Honda jobs: a coated Civic front rotor, an OE-style CR-V rotor and a fully coated Pilot rotor.

Bosch QuietCast 53011452
An OE-style coated disc for the tenth- and eleventh-generation Civic.

Wagner ES BD180726UC
A bolt-on replacement that restores the factory feel on the fifth-generation CR-V.

Raybestos Element3 980566FZN
A coated OE-matched rotor for the second-generation Pilot.
Plain, Coated or Slotted: Rotor Styles on a Honda
Honda fits its everyday models with plain vented discs built for quiet stops. For most owners, the right replacement keeps that design and adds better corrosion protection.
- Plain OE-style rotors: a smooth face and the factory vane layout. They pair well with ceramic pads and keep the original pedal feel.
- Coated rotors: the same shape, with a zinc, Geomet or similar finish on the hat, edge and vanes. The braking surface wears clean in a few stops while the rest of the part resists rust.
- Drilled and slotted rotors: mostly about looks and heat on a daily Honda, with a little more pad wear and noise.
Rotors and pads wear as a team. The Car Care Council’s vehicle systems overview calls brakes a normal wear item and points out that letting the pads reach metal-to-metal contact usually turns a pad job into rotor replacement. If you are shopping for the friction side too, our picks for daily-driving brake pads pair well with any rotor here.
Diameter, Axle and Generation: Checking Fit First
Honda often uses two or three front rotor sizes within one model line. Base Civics have run 262mm discs, many later Civics and Accords use 282mm, and the Civic Si steps up to 312mm. Pilots, Odysseys and Passports share larger fronts again, so the size printed in a listing title matters.
Write down your year, trim, engine and drivetrain, then run them through Amazon’s fit checker on the listing page. Most single-rotor listings ship one disc, so order two for the axle.
A pedal that pulses or a steering wheel that shakes under braking often points to uneven rotor thickness or deposits, though worn suspension parts can feel similar. Our article on why a car shakes when braking sorts out the usual causes before you spend money on parts.
Best Rotors for Honda: Six Listings Matched to Model
Each pick below is one Amazon listing for the Honda models it names. Use the model years as a guide, then confirm your year, trim, axle and rotor size in the fit checker; no single part fits every Honda.
1. Bosch QuietCast 53011452: 282mm Coated Front Rotor for Civic, Accord and Insight

- Front rotor, 282mm, sold singly
- Aluminum/zinc coating against rust
- Mill balanced, OEM-style vanes
- Engraved discard thickness
Bosch QuietCast 53011452 is a single front rotor with a 282mm diameter. The listing names the 2016 to 2023 Honda Civic, the 2016 and 2017 Accord and the 2019 to 2022 Insight. That makes it a strong fit for the many tenth- and eleventh-generation Civics that do the daily commute, though the Si, Type R and some trims use a larger disc, so the diameter on your old rotor is worth checking.
Bosch states that every QuietCast rotor is factory mill balanced to avoid pedal pulsation and uses an OEM-style vane layout for heat dissipation and quieter running. An aluminum and zinc coating protects against rust and corrosion, which helps on the hat and edges that the pads never touch. Where a car needs one, the rotor carries an OEM-style ABS tone ring. Bosch also engraves the discard thickness on the part, so you can see at a later brake job whether the rotor still has life left.
Because it ships as one disc, order two for the front axle and pair them with new pads. It is a plain-face rotor, so it suits owners who want the factory feel rather than a drilled or slotted look. Trim and engine can change fitment, so run your car through the fit checker.
View Bosch QuietCast 53011452 on Amazon
2. Centric Premium 120.40057: Front Rotor for 2006-2015 Civic and 2005-2006 CR-V

- Front rotor, OE vane design
- Painted hat and outer edge
- Low runout and thickness variation
- Precision balanced
Centric Premium 120.40057 is a front rotor from one of the larger aftermarket brake brands. The listing names the Honda Civic from 2006 to 2015 and the CR-V from 2005 to 2006, along with the Acura CSX, ILX and RSX. That covers a lot of older Hondas that are still on the road, and many of them are the high-mileage commuters that keep needing brakes every few years.
Centric describes an OE vane design and plate thickness for heat capacity and strength, and a metallurgy chosen for heat transfer and structural strength. The rotor is built with low initial lateral runout and low thickness variation, which the brand says helps give smooth, vibration-free stops, and it is precision balanced. The hat and outer edge are painted for corrosion resistance, while the braking surface comes with a finish that Centric says gives a consistent feel from the first stop.
Civic trims across those years did not all share the same front disc, so confirm your exact car in the fit checker and compare the new rotor with the old part. It is a plain OE-style rotor without a full coating on the vanes. Buy a pair and fit new pads at the same time.
View Centric Premium 120.40057 on Amazon

3. Wagner ES BD180726UC: OE-Style Front Rotor for 2017-2019 Honda CR-V

- Front rotor named for 2017-2019 CR-V
- OE-style design and feel
- Precision balanced
- Non-directional finish, no machining
Wagner ES BD180726UC is a front rotor whose listing names the 2017 to 2019 Honda CR-V. The fifth-generation CR-V is one of the most common crossovers in any parking lot, and its front brakes do most of the work when it is loaded with passengers, groceries or sports gear. This listing gives you a specific part number for those model years instead of a broad range.
Wagner says the rotor uses an OE-style design intended to restore the factory braking feel, and that it is precision balanced to help reduce pedal pulsation. It installs as a bolt-on part with no machining needed and has a non-directional finish that Wagner says supports proper bedding of new pads. The brand also describes heat dispersion metallurgy and a build aimed at reliable everyday use, which is the job most CR-V owners need it for.
Later CR-Vs from 2020 onward are not named on this listing, so a newer car needs a different part. The listing does not describe a full rust coating, so owners who park outside all winter may want to clean the hub carefully and keep an eye on the hat. Order two for the axle and confirm trim and drivetrain with the fit checker.
View Wagner ES BD180726UC on Amazon
4. R1 Concepts eLINE: Drilled and Slotted Front and Rear Brake Kit for 2018-2021 Accord

- Four drilled and slotted rotors
- Eight ceramic pads plus hardware
- G3000 grade iron
- 12.3 inch front, 11.1 inch rear
The R1 Concepts eLINE kit is a full front and rear brake package whose listing names the 2018 to 2021 Honda Accord sedan. In the box are four eLINE drilled and slotted silver rotors, eight ceramic brake pads and hardware, with a 12.3 inch front rotor and an 11.1 inch rear rotor. For an Accord that needs brakes at both ends, it puts every rotor and pad in one order.
R1 Concepts says the cross-drilled and diamond-slotted rotors are made from G3000 grade iron for strength and durability, and that the ceramic pads are formulated for low dust and noise in daily driving. The brand describes the kit as direct fitment, built with OEM specifications in mind and needing no modification. The listing states a one-year coverage period for manufacturer defects.
Drilled and slotted rotors are mostly a style choice on a commuter Accord, and they can wear pads somewhat faster than a plain disc. Accord trims and engines can differ in brake hardware, so match the 12.3 inch front figure to your car. Rear service on this generation involves the electric parking brake, which needs a service procedure or scan tool. Confirm your exact Accord in the fit checker before ordering.
View R1 Concepts eLINE Accord Kit on Amazon

5. Raybestos Element3 980566FZN: Fully Coated Front Rotor for 2009-2015 Honda Pilot

- Grey Fusion 4.0 coating
- RPT rust prevention technology
- Coated cooling vanes
- Listing names 2009-2015 Pilot front
Raybestos Element3 980566FZN is a front rotor for the second-generation Honda Pilot. The listing names the 2009 to 2015 Pilot, plus the 2007 to 2013 Acura MDX, the 2014 to 2020 RLX and the 2010 to 2013 ZDX. A Pilot from those years is heavy, often carries a full load of passengers and tends to wear through front rotors faster than a smaller Honda.
Raybestos says the Grey Fusion 4.0 coating gives corrosion resistance and speeds up rotor jobs, and that its RPT rust prevention technology is designed for long-lasting protection. The cooling vanes are coated as well, which the brand says keeps them clear of rust and corrosion for airflow and cooling. Element3 rotors are described as OE matched in precision and performance, so this one keeps the factory plain-face design.
The coating is the main reason to choose it for a Pilot that sees West Michigan winters, since the vanes and hat are where bare iron rusts first. It does not suit the 2016 and later Pilot, which uses a different front rotor. Buy a pair, fit new pads with them and confirm your trim and drivetrain in the fit checker before you order.
View Raybestos Element3 980566FZN on Amazon
6. Power Stop Z17 CRK7670: Front Coated Rotor and Ceramic Pad Kit for 2018-2025 Odyssey

- Two fully coated front rotors
- Z17 ceramic pads with shims
- Stainless steel hardware included
- Listing names Odyssey 2018-25
Power Stop Z17 CRK7670 is a front brake kit whose listing names the Honda Odyssey from 2018 to 2025. It includes two fully coated front rotors, two sets of Z17 ceramic brake pads and stainless steel installation hardware. A family minivan puts plenty of weight on its front brakes, and this kit covers the whole front axle in a single order instead of matching parts from different brands.
Power Stop says the rotors have a full Geomet coated finish to help resist rust and corrosion for longer life in daily driving. The Z17 pads use multi-layer rubberized shims that the brand says make braking virtually noise free, and a low-dust ceramic compound to keep wheels cleaner. The listing states a 24 month or 24,000 mile limited warranty, and notes that the kit may arrive in more than one box.
This is an OE-style replacement, not a performance upgrade, so it suits owners who want the stock feel with better corrosion protection. It covers the front only, and the rear brakes on this Odyssey use an electric parking brake that needs a service mode before work. Odyssey trims can differ, so confirm your exact van with the fit checker on the listing.
View Power Stop Z17 CRK7670 on Amazon
Side by Side: Which Listing Suits Your Honda
The table lines up the models each listing names with the type of rotor it is. Treat it as a shortlist for narrowing down the best rotors for Honda cars in your household, and let the fit checker have the final word.
| Listing | Models it names | Rotor type |
|---|---|---|
| Bosch QuietCast 53011452 | Civic 2016-2023, Accord 2016-2017, Insight 2019-2022 | Coated OE-style, front, 282mm |
| Centric Premium 120.40057 | Civic 2006-2015, CR-V 2005-2006 | OE-style, painted hat and edge, front |
| Wagner ES BD180726UC | CR-V 2017-2019 | OE-style, front |
| R1 Concepts eLINE kit | Accord 2018-2021 | Drilled and slotted, front and rear, with pads |
| Raybestos Element3 980566FZN | Pilot 2009-2015 | Fully coated, front |
| Power Stop Z17 CRK7670 | Odyssey 2018-2025 | Fully coated, front, with pads |
Always fit fresh pads with new rotors, since old pads have worn to the shape of the old discs. Then bed them in following the maker’s instructions, usually a series of moderate stops without coming to a full halt.

Road Salt and Honda Rotors in West Michigan
Winter brine eats bare cast iron. On Hondas parked outside through a Grand Rapids winter, the rotor hat and outer edge rust first, and the scale can cause noise and seize the rotor to the hub.
A coated rotor slows that process, and it is the reason three of the six picks carry a rust-resistant coating. Clean the hub face with a wire brush before the new disc goes on, so it sits flat and runs true. Our roundup of coated brake rotors for rust explains the coating types in more depth.

DIY Rotor Swap or a Shop Visit?
Front rotors on most Hondas come off after the caliper bracket is removed, though many are held by small retaining screws that seize in salt country and may need an impact driver. Soak rusty screws with penetrating oil before you start. You will need jack stands, a torque wrench and brake cleaner for the new disc.

Rear brakes on recent Civics, Accords, CR-Vs, Pilots and Odysseys use an electric parking brake, so the rear caliper must be put into service mode with a scan tool or the model’s procedure before the pads come out. Check the minimum thickness stamped on any rotor you plan to keep. If the pedal sinks, the car pulls or you hear grinding, book in with our Grand Rapids brake repair service, which handles rotors, pads, calipers and hardware.
More Buying Guides
Frequently Asked Questions
Are genuine Honda rotors worth the extra cost?
Genuine rotors are a safe choice, but a quality OE-style rotor listed for your exact model, year and trim gives the same fit and feel on a daily-driven Honda. Look for a coated finish if the car spends winters on salted roads.
Can Honda rotors be resurfaced instead of replaced?
Sometimes. A rotor can be machined only if it will stay above the minimum thickness stamped on it after cutting. Machining removes metal, so a rotor that is already near that limit, pulsing or showing a deep lip is usually better replaced.
What are the best rotors for Honda CR-V and Pilot models?
It depends on the generation. The Wagner ES BD180726UC listing names the 2017 to 2019 CR-V front, Centric Premium 120.40057 covers the 2005 and 2006 CR-V, and Raybestos Element3 980566FZN names the 2009 to 2015 Pilot. Confirm your trim in the fit checker.
Do drilled and slotted rotors stop a Honda better?
Not on a typical commute. A plain or coated OE-style rotor with good pads stops a Civic or Accord well. Drilled and slotted designs mainly add style and some heat handling, and they can wear pads a little faster.
Feeling a pulse in the pedal of your Civic, Accord or CR-V? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a rotor and pad inspection through our contact page.
If your workday overlaps our hours, bring the Honda by after we close and use the after-hours drop-off at 456 Carrier St NE, Grand Rapids, MI 49505.
