As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Nissan builds its popular sedans, crossovers and trucks on very different brake hardware, so the best brake rotors for Nissan owners depend first on which badge sits on the tailgate. An Altima rotor will not bolt onto a Frontier, and even two Pathfinders a year apart can need different parts.
This guide covers the Altima, Rogue, Sentra, Frontier and Pathfinder, with one specific front rotor listing for each. Every listing names its own years, so check your year, trim and engine in Amazon’s fit checker before you order.
Quick answer
Which rotors should you buy for a Nissan?
Buy an OE-style rotor listed for your exact model and years, and pick a coated one if the car sees salted roads. Good matches include PowerStop JBR1558 for a 2013-on Altima, a coated DuraGo pair for a 2014-on Rogue and Bosch QuietCast for a Frontier. Fit new pads at the same time.
Our Quick Picks
Three listings that cover the most common Nissans: a direct-fit Altima rotor, a coated Rogue pair and a coated Frontier rotor for salted winters.

PowerStop JBR1558
A direct-fit replacement rotor built to the Altima's factory dimensions.

DuraGo Front Pair
A coated front pair that covers both sides of the axle in one order.

Bosch QuietCast 40011066
A coated OE-style rotor for the long-running Frontier and its truck siblings.
Why One Nissan Rotor Rarely Fits Another
Nissan shares parts across its range, but the sharing follows platforms, not names. The 2005 to 2012 Pathfinder was a body-on-frame truck built alongside the Frontier, so it takes the same front rotor. From 2013 the Pathfinder moved to a unibody crossover layout and a larger 320mm rotor shared with the Murano.
The Rogue and Altima show the same pattern. A 2008 to 2013 Rogue uses a different part from the 2014 to 2020 model, and the 2013-on Altima differs again from the 2007 to 2012 car. Sentra brakes changed too, and many 2017 to 2019 Sentras use rear drums, so only the front rotors apply.
Look at the box contents as well. Some listings ship one rotor and others ship a pair, and you always replace rotors across the whole axle.
Plain, Coated or Budget Pair: Picking Your Type
Most Nissan owners are best served by a rotor built to the factory diameter, thickness and vane pattern. Drilled and slotted parts exist, but a commuter or work truck gains little from them. The real choices are about finish and price.
- Plain OE-style: bare cast iron, sometimes with painted edges. It costs less, though the hat and vanes rust in wet weather.
- Fully coated: a zinc, aluminum or Geomet layer on every surface. The pad track wears clean in the first stops while the rest stays protected.
- Budget pairs: two rotors in one box from value brands. Sensible for an older car, as long as the listing names your model.
PowerStop, for one, says on its OE Stock Replacement Rotor page that these non-coated rotors are 100% mill balanced and match the original weight and vane count. For a wider look at rotor designs, our guide to choosing the best brake rotors compares blank, drilled and slotted styles.
Best Brake Rotors for Nissan: Six Listings by Model
Each listing below names the models, years and axle stated on Amazon. Nissan often uses more than one front rotor size within a model run, so trust the fit checker over the headline.
1. PowerStop JBR1558: Front OE-Replacement Rotor for 2013-2026 Nissan Altima

- Front rotor for 2013-2026 Altima
- Precision mill balanced
- OE vane count and dimensions
- Sold as a single rotor
PowerStop JBR1558 is a front rotor that its listing names for the 2013 to 2026 Nissan Altima. It is sold as one piece for either the left or right side, so a front axle job needs two. PowerStop asks buyers to confirm fitment with the Amazon fit bar or the product description, which matters on a model that has run this long.
The listing describes a non-coated rotor that is precision mill balanced and built to meet OE specifications for smooth, consistent braking with less vibration. PowerStop says it matches the original vane count and dimensions, so it bolts on without modification. The listing also mentions a limited warranty, with terms set by the maker.
This is a straightforward choice for an Altima that needs new front rotors and nothing fancy. Because the face and hat are bare iron, expect surface rust on the edges after a wet week, which is cosmetic on the outside but worth watching on the hub face. If your Altima lives outdoors through a salted winter, a coated rotor may last longer in looks and fit. Pair it with fresh pads and bed them in following the pad maker’s steps.
View PowerStop JBR1558 on Amazon
2. DuraGo Front Rotor Pair: Titanium Coated for 2014-2020 Nissan Rogue

- Front pair, two rotors in the box
- Titanium coated, rust resistant
- Rogue 2014-2020, Rogue Sport 2017-2022
- Also lists the 2014-2017 LEAF
This DuraGo set is a front pair of disc brake rotors that its listing names for the 2014 to 2020 Nissan Rogue, the 2017 to 2022 Rogue Sport and the 2014 to 2017 LEAF. Two rotors come in the box, so one order covers the whole front axle. The earlier 2008 to 2013 Rogue uses a different rotor, so check the generation before ordering.
The listing describes the rotors as titanium coated and rust resistant. A coating like this protects the hat, edges and other surfaces the pads never touch, while the friction face wears clean during the first few stops. The listing gives little else in the way of detail, so check the diameter and thickness against your original rotors when they arrive.
Many Rogues in West Michigan spend winter nights parked outside in the slush. A coated pair suits that kind of use, since rust on the hat and hub face is a common cause of pedal pulsation. Fit new pads at the same time, clean the hub face to bare metal and torque the lug nuts evenly. Confirm your year and trim in the fit checker first.
View DuraGo Front Pair on Amazon

3. Detroit Axle 2pc Front Rotors: 280mm Pair for 2013-2019 Nissan Sentra

- Two front rotors in the box
- 11.02 inch (280mm) diameter
- Sentra 2013-2016 and 2017-2019
- Impact, wear and fatigue tested
This Detroit Axle set includes two front disc brake rotors that its listing names for the 2013 to 2019 Nissan Sentra. The stated outer diameter is 11.02 inches, or 280mm. The listing splits the run into 2013 to 2016 cars and 2017 to 2019 cars with rear drum brakes, so it is worth knowing which rear setup yours has before you shop for other parts.
Detroit Axle says the rotors are built to exceed OEM specifications and have the fit and finish needed for proper stopping. The listing also states that they undergo impact, wear and fatigue testing for quality and durability. Because both rotors come together, you avoid ordering mismatched sides or waiting on a second box.
A Sentra of this age is often a commuter or a first car, and a value pair keeps the cost of a front brake job sensible. The listing does not mention a protective coating, so expect the hat and edges to rust in wet weather. Replace the pads at the same time and bed them in gently. Sentra trims and engines vary, so run the fit checker with your exact details before buying.
View Detroit Axle 2pc Front on Amazon
4. Bosch QuietCast 40011066: 295.6mm Coated Front Rotor for Nissan Frontier

- Front, 295.6mm, sold single
- Aluminum/zinc corrosion coating
- Mill precision balanced
- Engraved discard thickness
Bosch QuietCast 40011066 is a single front rotor with a 295.6mm diameter. Its listing names the 2005 to 2023 Nissan Frontier, the 2005 to 2012 Pathfinder and the 2005 to 2015 Xterra, plus the 2009 to 2011 Suzuki Equator built on the same platform. Bosch notes that trim level and engine can affect fitment, so use the fit checker.
According to the listing, every QuietCast rotor is factory mill precision balanced to spread weight evenly and avoid pedal pulsation. The vane layout follows the OEM style for heat dissipation and quieter running, and an aluminum and zinc coating guards against rust and corrosion. Where the vehicle needs one, an OEM-style ABS tone ring is included, and the discard thickness is engraved on the part.
A Frontier that hauls, tows a small trailer or plows a driveway sees plenty of salt and heat, and the coating helps the hat and vanes stay clean through those seasons. The engraved discard figure also makes the next inspection easy, since you can measure against a number on the rotor itself. Buy two for the axle and pair them with truck-suitable pads.
View Bosch QuietCast 40011066 on Amazon

5. Bison Performance BPBD22004: Geomet Coated Front Rotor for Nissan Frontier 4.0L

- Front rotor, Frontier 2005-2023
- Geomet rust and corrosion coating
- G3000 cast iron, mill balanced
- Non-directional surface finish
Bison Performance BPBD22004 is a front disc brake rotor that its listing names for the 2005 to 2023 Nissan Frontier, the 2005 to 2012 Pathfinder, the 2005 to 2015 Xterra and the 2009 to 2011 Suzuki Equator, with the 4.0L engine called out in the title. The listing describes one rotor, so plan on two for the front axle.
Bison says the rotor carries a Geomet coating that protects against rust and corrosion without affecting braking performance. It is cast from G3000 iron to match OE specifications, uses an OE-specific vane configuration for heat dissipation, and is mill balanced and fully machined for smooth stops. A non-directional surface finish is meant to speed up brake-in.
This gives Frontier, Xterra and older Pathfinder owners a second coated choice alongside the Bosch rotor. Geomet is a thin zinc and aluminum flake finish that is common on rotors sold for salt-belt use, and it helps keep the hub face and vanes cleaner. Because the title mentions the 4.0L engine, owners of four-cylinder trucks should check the fit checker carefully before ordering. Replace the pads at the same time.
View Bison Performance BPBD22004 on Amazon
6. Bendix Premium PRT6232: Front OE-Replacement Rotor for 2013-2021 Nissan Pathfinder

- Front rotor, Pathfinder 2013-2021
- Also lists Murano 2015-2023
- Built to OE specifications
- Designed for heat dissipation
Bendix Premium PRT6232 is a front brake rotor that its listing names for the 2013 to 2021 Nissan Pathfinder and the 2015 to 2023 Murano, along with the 2023 Z and several Infiniti models including the QX60 and Q50. These vehicles share a larger front rotor, so this part does not fit the older body-on-frame Pathfinder that uses the Frontier rotor.
Bendix says the rotor is designed and engineered to OE specifications for fit, form and function. The listing describes a design meant for efficient heat dissipation, which helps reduce the risk of brake fade, and a construction aimed at minimizing noise and vibration. It is listed as a single rotor, so order two for the axle.
A three-row Pathfinder carrying a full load of passengers and gear asks a lot of its front brakes, especially on long stop-and-go drives. An OE-spec rotor of the correct size keeps the braking feel close to factory. The listing does not mention a corrosion coating, so clean the hub face carefully at installation. Pathfinder brake packages vary by year and trim, so confirm the part with the fit checker before you buy.
View Bendix Premium PRT6232 on Amazon
Matching a Rotor to Your Nissan
Use this table as a starting point, then confirm the part number for your car.
| Your Nissan | Listing | Finish | In the box |
|---|---|---|---|
| Altima, 2013 on | PowerStop JBR1558 | Plain, mill balanced | One rotor |
| Rogue 2014-2020, Rogue Sport 2017-2022 | DuraGo front pair | Titanium coated | Two rotors |
| Sentra 2013-2019 | Detroit Axle 2pc front | Plain | Two rotors |
| Frontier 2005-2023, Pathfinder 2005-2012 | Bosch QuietCast 40011066 or Bison BPBD22004 | Coated | One rotor |
| Pathfinder 2013-2021 | Bendix Premium PRT6232 | OE-style | One rotor |
Pair the rotors with fresh pads. Our roundup of the best brake pads for daily driving suits most Altima, Rogue and Sentra owners, and the brake pad guide for the Nissan Qashqai also applies to the closely related Rogue Sport.

Road Salt and Nissan Brakes in West Michigan
Brine and slush sit on brake parts here from November to March. Rust grows on the rotor hat and on the hub face behind it, and a layer of scale there tilts the new rotor slightly. You feel that tilt as a pulse in the pedal a few thousand miles later.
That is why coated rotors make sense for a Frontier that plows a driveway or a Rogue parked outside all winter. Our guide to the best coated brake rotors for rust explains the finishes in more detail. Whatever you buy, scrub the hub face to bare metal before the rotor goes on.

Freeze-thaw potholes are hard on the rest of the front end too, so worn suspension parts can add to a shake that seems to come from the brakes.
Installing Nissan Rotors and When to Call Us
Every rotor has a minimum thickness stamped on it. Below that number it must be replaced, and deep grooves, a heavy lip, cracks or blue heat marks are reasons to swap it sooner. Replace the pads with the rotors, then bed them in following the pad maker’s steps.
Torque the caliper bracket bolts and lug nuts to spec, in a star pattern. Uneven lug torque is a common cause of pulsation, and our article on why a car shakes when braking walks through the other usual suspects.

Nissan also lists brakes among the routine checks on its Nissan owner service and maintenance page, so look at pad and rotor wear whenever the wheels come off. Even the best brake rotors for Nissan cars will not cure a sticking caliper or old fluid.
If the pedal sinks, the car pulls to one side or a grinding noise stays after new parts, have it checked before you drive far. Our shop offers brake repair in Grand Rapids for foreign and domestic vehicles, Nissans included.
More Buying Guides
Frequently Asked Questions
Does a Frontier rotor fit a Nissan Pathfinder?
Only on the 2005 to 2012 Pathfinder, which shares the Frontier’s front rotor. The 2013 and later Pathfinder uses a larger 320mm rotor, so it needs a different part number.
Are coated rotors worth it on a Nissan?
In a salt state they usually are. The coating keeps rust off the hat, edges and vanes, which helps the rotor sit flat on the hub and look cleaner behind open wheels.
Can Nissan rotors be resurfaced instead of replaced?
Yes, as long as the disc still measures above its stamped minimum once the lathe is done. Many Nissan front rotors have little spare material, so replacement is often the better choice.
Do I get one rotor or two in the box?
It depends on the listing. The PowerStop, Bosch, Bison and Bendix listings here describe a single rotor, while the DuraGo Rogue and Detroit Axle Sentra listings ship a pair. Order enough for the whole axle.
Want a second opinion on your Nissan’s brakes in Grand Rapids? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or schedule a visit through our contact page.
Tied up at work until evening? Our after-hours drop-off lets you leave the keys with us at 456 Carrier St NE, Grand Rapids, MI 49505, and we will take it from there.
