456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Early Heads or Vortec? The Best Spark Plugs for Chevy 350 Engines

best spark plugs for chevy 350: interior of loft with brick wall with wires hanging on ceiling and tools for renovation works

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Chevrolet built the 5.7-liter small block for decades, and it still sells new 350 crate engines today, so the same displacement can sit in a 1971 C10, a 1989 Corvette or a 1998 Silverado. Those engines don’t all take the same plug. Finding the best spark plugs for chevy 350 engines starts with knowing which heads you have, then choosing a proven copper or nickel plug in the right heat range.

This guide explains the early-head and Vortec split, decodes the numbers printed on a plug box, and reviews five real listings from ACDelco, NGK, Champion and E3. It finishes with gap and torque habits and the signs that a misfire has nothing to do with the plugs.

Quick answer

Which spark plug should a Chevy 350 run?

Most carbureted and TBI 350s with pre-1996 heads take a 14 mm tapered-seat plug in the R45TS family, such as ACDelco R45TS, NGK UR4 or Champion RV15YC4. Vortec 350 trucks from 1996 on need a different, longer plug like the NGK TR5. Match the head type first, then the heat range.

Our Quick Picks

Three plugs that cover the classic carbureted 350, the Gen I fuel-injected engines and the Vortec trucks. All five are reviewed below.

ACDelco R45TS product photo
Factory-style pick

ACDelco R45TS

Copper | R45TS | 8-pack

The GM-branded version of the plug many carbureted 350s left the factory with.

SuitsStock carbureted 350s with HEI
View on Amazon →
NGK V-Power UR4 product photo
Gen I fuel injection

NGK V-Power UR4

Nickel | UR4 | 8-pack

NGK's V-groove plug listed for the tuned-port Corvette 350.

SuitsTPI, TBI and carbureted Gen I engines
View on Amazon →
NGK V-Power TR5 product photo
Vortec trucks

NGK V-Power TR5

Nickel | TR5 | 8-pack

A longer-reach NGK plug listed for the 1998 Silverado 350.

Suits1996 and later Vortec 350 trucks
View on Amazon →

Which 350 Is Under Your Hood?

Every 350 in this guide is a first-generation small block, but the cylinder heads changed over time, and the heads decide the plug. Carbureted engines from the late 1960s through the 1980s, the throttle-body trucks of the late 1980s and early 1990s, and the tuned-port Corvettes and Camaros all share a 14 mm thread and a tapered seat. On most of them the classic factory plug was an AC R44TS, R45TS or R43TS, depending on year and use.

The Vortec 350 that arrived in GM trucks and vans for 1996 is different. Its heads take a plug with a longer reach, so an R45TS will sit too shallow in the chamber. If your truck is an OBS Silverado or Suburban, the year matters: a 1995 and a 1997 can look nearly identical yet need different plugs.

Crate engines and swapped heads muddy things further. Chevrolet Performance still lists 5.7L small-block crate engines such as the SP350/357 and ZZ6, and many older cars now run aluminum aftermarket heads. If the engine isn’t original, go by the head maker’s plug spec rather than the car’s model year.

Some related engines sit outside this page. The 1992-1997 LT1 is a second-generation 350 with its own plug spec, the LS-based 5.3 and the LT4 in a ZL1 Camaro use completely different plugs, and big block engines like the 454 have their own part numbers. Our hub on choosing spark plugs across engine families covers those.

Reading a Plug Number Before You Order

The old GM code tells you most of what you need. In R45TS, the R means a resistor plug, 45 is the heat range, T means a tapered seat and S means an extended tip that reaches further into the chamber. A tapered seat seals on its own cone, so there is no crush washer to fit.

  • Thread and hex: early 350 heads take a 14 mm thread with a 5/8 in hex, so you need a 5/8 in plug socket.
  • Reach: how far the threads go into the head. Early heads and Vortec heads differ here, which is why the plugs aren’t interchangeable.
  • Heat range: how quickly the plug sheds heat. ACDelco and Champion numbers rise as plugs get hotter, while NGK numbers rise as plugs get colder.
  • Resistor: a resistor plug cuts radio noise and suits HEI and electronic ignition.

The heat range is where most owners go wrong. A hotter plug burns off carbon on an engine that idles a lot or runs rich, while a colder plug resists pre-ignition on a high-compression or hard-driven build. For a stock or mildly modified 350, the factory heat range is the right starting point.

Best Spark Plugs for Chevy 350 Engines, Reviewed

Four of these plugs suit the early heads and one suits the Vortec trucks. Each listing below names a 350 or cross-references the classic GM numbers, but the exact plug still depends on your engine, so check before you buy.

1. ACDelco R45TS: Copper Core Conventional Spark Plug, 8-Pack

ACDelco R45TS product photo
Key features
  • Classic GM R45TS part number
  • Copper core for heat transfer
  • Nickel-chrome center electrode sheath
  • Black onyx anti-corrosion coating

The R45TS is the number most people picture when they think of a small block Chevy plug, and this listing is a box of eight from ACDelco, GM’s own parts brand. It is a conventional resistor plug with a tapered seat and an extended tip, built around a copper core. The listing says it is compatible with Buick, Cadillac, Chevrolet and GMC engines.

The copper core moves heat out of the tip quickly, which helps the plug hold its heat range across a wide spread of driving. The center electrode has a nickel-chrome sheath and the shell carries a black onyx coating, both meant to slow corrosion. That coating is useful on a car that sits in a damp garage through a Michigan winter. The listing also notes the plug is available for marine use.

This suits a stock or near-stock carbureted 350 with HEI ignition, where the factory called for an R45TS or a close relative. It is not the plug for a 1996 or later Vortec head, which needs a longer reach. Copper electrodes wear faster than iridium ones, so plan to check and regap these at each tune-up. Make sure the fit tool lists your Chevy 350 before this goes in the cart.

View ACDelco R45TS on Amazon

2. NGK V-Power UR4: Gen I Small Block Spark Plug, 8-Pack

NGK V-Power UR4 product photo
Key features
  • Listed for 1988-1991 Corvette 5.7L/350
  • Chevy small block Gen I family
  • Resistor plug, heat range 4
  • Standard length, not a shorty

NGK’s V-Power line is its standard nickel plug with a V-shaped groove cut into the center electrode. The groove is meant to push the spark toward the edge of the electrode, where it has an easier path into the mixture. This eight-pack is the UR4, and the listing names the 1988 to 1991 Corvette with the 5.7L/350 and the Chevy small block Gen I engine family.

The listing gives the heat range as 4, confirms it is a resistor plug, and states that it is not a shorty design. On NGK’s scale a lower number is a hotter plug, so this sits on the warm side of the range. That suits an engine that sees plenty of idling and stop-and-go driving. NGK’s UR4 listings also cross-reference the R45TS, which makes it an easy swap for the GM number.

Because the listing names a tuned-port Corvette, it is a natural fit for TPI engines, but the same plug crosses over to many carbureted and TBI Gen I 350s with original-style heads. It does not fit Vortec heads. Owners with headers that crowd the plugs may need a different style, so measure the clearance first and confirm your year, model and engine on Amazon before buying.

View NGK V-Power UR4 on Amazon

drone capture of a road partially covered by sand dunes in a desert landscape

3. Champion RV15YC4 Copper Plus: 14 mm Tapered Seat Plug, 4-Pack

Champion RV15YC4 product photo
Key features
  • Replaces R43TS and CR43TS
  • 14 mm thread, 5/8 in hex
  • Tapered seat, 11.6 mm reach
  • Gap .040 in, heat range 15

Champion has made plugs for American V8s for generations, and the RV15YC4, often sold as the Champion 18, is its common small block plug. This listing is a pack of four, so a V8 needs two packs. The title lists the numbers it replaces, including the AC R43TS, CR43TS and 41-905.

The listing spells out the dimensions that matter: a 14 mm thread, 5/8 inch hex, tapered seat and 11.6 mm reach, which match the early small block heads. It is a resistor plug with a stated gap of .040 inch and a heat range of 15 on Champion’s scale. The Copper Plus name refers to the copper core, which pulls heat away from the tip.

Because it replaces the R43TS rather than the R45TS, it runs a little cooler than the most common factory plug. That suits engines that originally called for an R43TS, or a mildly built 350 that sees more highway or towing duty than idling. Check that the gap matches your engine’s label before installing. Confirm your year, model and engine on Amazon before buying, and don’t use it in Vortec heads.

View Champion RV15YC4 on Amazon

4. E3.42 Premium Automotive: DiamondFIRE Ground Spark Plug, 8-Pack

E3.42 product photo
Key features
  • Replaces R44TS, R45TS and R44T
  • DiamondFIRE ground electrode
  • Pre-gapped at the factory
  • Sold as an 8-pack

E3 takes a different approach to the ground electrode. Instead of a single bent strap over the center electrode, its DiamondFIRE design uses a three-leg ground, which the company says improves heat transfer and turbulence in the chamber. This E3.42 eight-pack replaces a long list of conventional numbers, including the R44TS, R45TS, R44T and R45T used in small block Chevrolets.

The practical difference shows up at installation. E3 says its automotive plugs are gapped at the factory to the original equipment requirement for the engines they are listed to fit, and it tells owners not to change the gap. That removes a step, but it also means you can’t fine-tune the gap for a high-output ignition the way you can with a conventional plug.

This plug suits an owner who wants to try something other than a copper strap plug in a carbureted or TBI 350 with early heads. Because the gap can’t be adjusted, it is less flexible for engines with aftermarket ignition boxes. Read your plugs after a few hundred miles to confirm the heat range suits your engine, and confirm your year, model and engine on Amazon before buying.

View E3.42 on Amazon

silhouettes of people working in a dimly lit workshop

5. NGK V-Power TR5: Vortec 5.7L/350 Truck Spark Plug, 8-Pack

NGK V-Power TR5 product photo
Key features
  • Listed for 1998 K1500 Silverado 5.7L/350
  • Chevy small block Gen I family
  • Trivalent anti-seize plating
  • Sold as an 8-pack

The 1996 and later Vortec 350 is the engine that trips people up, because it looks like any other small block but its heads take a plug with a longer reach. This NGK V-Power TR5 eight-pack is listed for the 1998 K1500 Silverado with the 5.7L/350, which used that engine. It belongs to the same V-Power family as the UR4 above, with the V-groove center electrode.

The listing describes trivalent metal plating that resists corrosion and seizing, which helps when a truck has spent years on salted roads and the plugs have to come out again. NGK also says the plug is original equipment approved and built to resist electrical and chemical wear, and it claims better fuel economy and lower emissions from the design.

This is the plug to look at for an OBS-era Vortec Silverado, Sierra, Suburban, Tahoe or Express van, rather than an R45TS. It does not fit the earlier heads, where it would reach too far into the chamber. Plug access on these trucks is tight, so a swivel socket and plenty of extension help. Check this Chevy 350 part against your year and engine on Amazon first.

View NGK V-Power TR5 on Amazon

Matching the Plug to Your 350

The table sorts the five listings by the engine and job they suit. Treat it as a shortlist, and confirm your year, model and engine on Amazon before buying.

PlugTypeWhat the listing namesGood match for
ACDelco R45TSCopper coreBuick, Cadillac, Chevrolet and GMCStock carbureted 350s with HEI
NGK V-Power UR4Nickel, V-groove1988-1991 Corvette 5.7L/350Tuned-port and other Gen I engines
Champion RV15YC4Copper PlusReplaces R43TS, tapered seatEngines specified for a slightly colder plug
E3.42DiamondFIRE groundReplaces R44TS and R45TSOwners who want a different electrode design
NGK V-Power TR5Nickel, V-groove1998 K1500 Silverado 5.7L/350Vortec 350 trucks
Best spark plugs for chevy 350 engines, sorted by the head type and use each listing suits.

Iridium and platinum plugs are missing on purpose. They make sense on modern coil-on-plug engines with long service intervals, but a carbureted 350 with a distributor gets tuned often enough that a copper or nickel plug’s shorter life doesn’t matter much. Copper plugs also tell you more when you read them, since the insulator color reflects the mixture and timing clearly.

deserted road in Tunisia marked with a 50 km/h speed limit sign under a clear sky

Gap, Torque and Winter Habits

Gap every conventional plug before it goes in, even if the box says it’s pre-set. Points-era engines generally run a narrower gap than HEI engines, and the correct figure is on the emissions label under the hood or in the service manual. E3 is the exception: its spark plug FAQ says automotive plugs are gapped at the factory and should not be adjusted.

Tapered-seat plugs need less torque than gasket plugs, because the cone seals without a washer to crush. Start each plug by hand so it can’t cross-thread, then follow the plug maker’s torque chart rather than guessing with a long ratchet. Replace plug wires and check the distributor cap and rotor at the same time if they’re old.

cozy indoor space featuring a vintage lamp

West Michigan winters are hard on carbureted engines. A cold start with the choke closed runs rich, and a short trip to the store never lets the plugs reach the temperature that burns the soot off. Several weeks of that can leave black, fouled plugs and a rough idle, which a longer highway drive or a fresh set usually cures.

Cars stored from November to April have their own issue. Road salt from the fall can corrode exposed threads, so pull and inspect the plugs during spring service, and use a little anti-seize only if the plug maker allows it. Our guide on how often to change spark plugs covers replacement intervals by plug type.

When the Misfire Isn’t the Plugs

New plugs won’t cure a cracked distributor cap, a vacuum leak or a burnt valve. If the miss stays after a fresh set and new wires, a compression test and a look at the ignition parts come next. On a 1996 or later Vortec truck with OBD-II, a flashing check engine light means an active misfire, and our check engine light diagnostics in Grand Rapids can trace it before it damages the converter.

aerial view of a stark roundabout surrounded by endless desert sand dunes

Ignition timing matters as much as the plugs. A high-mileage 350 uses a timing chain, not a belt, and a stretched chain lets the cam timing drift, which brings weak power and timing that won’t hold steady. We handle that through our timing belt and chain service in Grand Rapids.

If a newer belt-driven engine shares the garage with your small block, the roundup of timing belt kit brands and what each kit includes explains the parts to order for that job.

Frequently Asked Questions

What are the best spark plugs for chevy 350 engines?

For most pre-1996 350s, a 14 mm tapered-seat resistor plug in the R45TS family works well: ACDelco R45TS, NGK UR4 or E3.42 are listed equivalents. Vortec 350 trucks from 1996 on need a longer plug such as the NGK TR5. Always confirm against your engine.

Are iridium plugs worth it in an old small block?

Usually not. Their main advantage is a long service life, and a carbureted 350 gets tuned more often than that. A copper or nickel plug in the right heat range runs just as well and is easier to read.

Can I use R45TS plugs in a Vortec 350?

No. Vortec heads take a plug with a longer reach, so a short plug sits too far back in the chamber. Use a plug listed for your Vortec truck, such as the NGK TR5.

Should I run a hotter or colder plug in my 350?

Start with the factory heat range. Go one step hotter only if plugs keep fouling from idling or rich running, and one step colder for high compression or hard use. Read the plugs after each change.

Small block running rough, or a check engine light on a Vortec truck? Give 456 AutoFix a call at 616-279-3832, Monday to Friday 8am to 5pm, or set up a visit through our contact page.

Working the same hours we do? Bring the car to our shop at 456 Carrier St NE, Grand Rapids, and leave it with the after-hours drop-off with a note about what it’s doing.