As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Camry with worn struts floats over highway dips, rocks forward when you brake and thumps across every patched seam in the road. The best struts for Camry sedans are the ones matched to your generation and trim, because an SE with sport tuning and an LE commuter use different parts even in the same model year.
Below we sort six listings by the 2007 to 2011, 2012 to 2017 and 2018 to 2024 cars, with loaded and bare options. If you are still deciding whether the struts are the problem at all, our guide on how to tell if struts are bad covers the bounce test and the visual checks first.
Quick answer
Which struts fit a Toyota Camry best?
Match the generation and trim first. For 2012 to 2017 cars, a loaded Monroe Quick-Strut or a bare KYB Excel-G restores the factory feel. A 2018 to 2024 LE or XLE suits the PM Auto front pair, while SE and XSE owners should look at TRQ or Detroit Axle sets.
Our Quick Picks
Three quick picks: a loaded Monroe corner for 2012 to 2017 cars, a PM Auto front pair for the 2018 to 2024 LE and XLE, and a bare KYB Excel-G for owners keeping their springs. All six listings are reviewed below.

Monroe Quick-Strut 172992
A complete bolt-in corner that also renews the spring and mount.

PM Auto Front Strut Pair
A matched front pair for the most common trims.

KYB Excel-G 335076
An OE-grade damper for owners keeping their springs.
Camry Generations and Trims Change the Part Number
Every Camry from 2007 onward uses a MacPherson strut at each front wheel. What changes from one generation to the next is the strut length, the mount and, on many years, the valving for each trim level.
- 2007 to 2011: struts at all four corners, and the front parts are often shared with the Lexus ES350 of the same era.
- 2012 to 2017: struts front and rear again, but SE and XSE cars carry a sport-tuned setup that takes its own part numbers.
- 2018 to 2024: struts up front with separate rear shocks, and listings split the L, LE and XLE from the SE, XSE and TRD by mounting spacing.
- 2025 and later: a newer, hybrid-only car that none of the listings below cover.
So the trim badge on the trunk lid matters as much as the year. Before you order anything, enter the full year, trim and engine in Amazon’s fit checker, and read any notes about sport suspension or adaptive dampers on the listing.
Loaded Assembly or Bare Strut: Which Job Do You Want?
A loaded assembly, sometimes called a quick strut, comes with the coil spring, top mount, bumper and boot already fitted to the damper. You swap the whole corner in one piece, and because the old rubber parts go out with it, the job also cures many top mount noises.
A bare strut is only the damper. The factory spring has to be compressed and moved across, which takes a proper tool and some care; read our guide to coil spring compressors for strut work before you try it. Bare struts suit owners who want a specific damper brand and whose springs and mounts are still healthy.
Either way, replace struts in axle pairs. A new strut on one side and a tired one on the other leaves the car leaning and braking unevenly.
Best Struts for Camry: Six Listings by Generation
Each listing below names the years and position it covers, and several are sold one side at a time. Confirm year, trim, engine and side on Amazon before you buy, since no single part fits every Camry.
1. Monroe Quick-Strut 172992: Loaded Front Strut and Coil Spring Assembly for 2012-2017 Camry

- Listed for 2012-2017 Toyota Camry
- Strut, coil spring and upper mount preassembled
- No spring compressor needed
- Protective coating with salt spray testing
The Monroe Quick-Strut 172992 is a complete front corner listed for the 2012 to 2017 Camry. Monroe pairs it with 172993 for the opposite side, and in Monroe’s numbering this part sits on the front right, so order both and fit them together. Because several trims of this generation use different struts, run your year, trim and engine through Amazon’s fit checker and read any qualifier notes before you buy.
Each unit arrives with the damper, a coil spring calibrated to the original design and a premium upper mount already assembled. Monroe says the spring is chosen to restore factory ride height, and that the new mount helps cut noise, vibration and the memory steer that a worn bearing plate can cause. The steel gets a protective coating that Monroe checks with salt spray testing, which is a useful detail for a car that sees salted winter roads.
The main benefit is a simpler job. You unbolt the old corner and bolt this one in, with no spring compressor and no reuse of tired rubber parts. It suits an owner whose sedan has sagged, rattles over bumps or floats on the highway and who wants it back to stock. It is not meant for lowering or for a firmer, sportier feel.
View Monroe Quick-Strut 172992 on Amazon
2. KYB Excel-G 335076: Twin-Tube Gas Front Strut for 2012-2017 Camry

- Cross-references Toyota 48510-09873 and 48510-09875
- Seamless cylinder with Teflon coated piston band
- Triple chrome plated piston rod
- Sintered iron rod guide for alignment
The KYB Excel-G 335076 is a bare gas strut for the Camry, sold as the damper alone. Its listing cross-references Toyota part numbers 48510-09873 and 48510-09875 and Monroe 72992, which point to the front right position on the 2012 to 2017 car. KYB sells the left side under a neighboring number, so check both parts in the fit checker against your trim before ordering.
KYB says the strut is calibrated to bring back the original handling and control of the Camry. The working cylinder is seamless and the piston uses a Teflon coated band for a tight seal and longer life. A triple chrome plated rod and multi-lip oil seals reduce wear, and a sintered iron rod guide helps the strut hold correct wheel alignment.
This is the choice for someone who wants an OE-style damper but whose springs, mounts and bumpers are still in good shape. The tradeoff is labor, since the factory spring has to be compressed and transferred, and that needs the right tool and some care. If your top mounts are noisy or the springs have sagged, a loaded assembly is the simpler route.
View KYB Excel-G 335076 on Amazon

3. Gabriel Ultra ReadyMount G57191: Front Right Strut and Coil Spring Assembly for 2007-2011 Camry

- Front right, 2007-2011 Camry and 2007-2012 ES350
- Preassembled with spring, mount and boot
- 6.89 in stroke, 21.5 in extended length
- Fit and ride tested by Gabriel
The Gabriel G57191 Ultra ReadyMount is a front right strut and coil spring assembly for the 2007 to 2011 Camry, and the listing also names the 2007 to 2012 Lexus ES350. It is one corner per box, so the left side has to be ordered separately. Confirm the year, trim and engine on Amazon first, because a few versions of this generation carry different parts.
The listing gives a stroke of 6.89 inches, an extended length of 21.5 inches and a collapsed length of 14.37 inches. Gabriel builds each ReadyMount with the strut, coil spring, upper mount, bumper, boot and spring seat already in place, and it says every new design is fit and ride tested on real vehicles. The damper uses Gabriel’s G-Force technology, meant to balance comfort and control over changing road surfaces.
For an older Camry with high miles, a complete corner makes sense, because the original mount and spring have usually aged along with the damper. The job needs no spring compressor and takes less time than rebuilding a bare strut. It is not intended for the 2012 or later car, and it is a stock replacement rather than a performance upgrade.
View Gabriel Ultra ReadyMount G57191 on Amazon
4. TRQ Front Strut and Spring Assembly Set: Driver and Passenger Pair for 2018-2024 Camry SE and XSE

- Front driver and passenger assemblies
- Listed for 2018-2024 Camry SE and XSE
- References Monroe 173151 and 173152
- Limited lifetime warranty
The TRQ set contains a front driver side and a front passenger side strut and spring assembly. TRQ lists it for the 2018 to 2024 Camry SE and XSE and the 2019 to 2022 Avalon XLE, and it gives Monroe 173151 and 173152 among its reference numbers. Those sport trims use different front struts from the LE and XLE Camry, so confirm your trim in the fit checker before you buy.
Both corners come preassembled as direct replacements for the factory units, so there is no need to compress springs or move parts across. Buying a matched pair also saves you from sorting out two separate side-specific listings. TRQ says it publishes do-it-yourself videos for many of its parts, which can help if you plan to do the swap at home.
The set suits an owner of a sport-trim Camry whose front end feels loose, crashes over potholes or leaks oil at the struts. TRQ backs it with a limited lifetime warranty against defects in materials and workmanship, with normal wear excluded. It does not include rear shocks, and it is not listed for the L, LE or XLE sedans.
View TRQ Front Strut Set on Amazon

5. PM Auto Front Left and Right Quick Complete Strut Assemblies for 2018-2024 Camry FWD

- Front left and right pair
- 2018-2024 Camry L, LE, XLE and Hybrid LE/XLE
- 68mm mounting spacing
- Complete strut and coil spring assemblies
PM Auto sells this as a pair of front left and front right quick complete strut and coil spring assemblies. The listing covers the 2018 to 2024 Camry with front-wheel drive in L, LE and XLE trims, plus the Hybrid LE and Hybrid XLE, and it gives a 68mm mounting spacing for each of those versions. The SE, XSE and all-wheel drive cars are not on that list, so check your car on Amazon first.
Each unit arrives as a complete corner, with the damper and spring already together, so the swap is a bolt-out, bolt-in job. Getting both sides in one order keeps the front matched and spares you from tracking down two separate part numbers. The seller asks buyers to use the fitment tool and read the notes before ordering.
This pair suits the many Camry owners driving a commuter trim who want a quiet, factory-style ride back after years of rough roads. It is a sensible way to refresh the front end of a high-mileage car when the springs and mounts are tired too. It is not a performance part, and the rear shocks are sold separately.
View PM Auto Front Strut Pair on Amazon
6. Detroit Axle 4pc Kit: Front Strut Assemblies and Rear Shocks for 2018-2024 Camry

- 2 front strut and spring assemblies
- 2 rear shock absorbers
- 2018-2024 Camry SE, XSE, TRD and Hybrid SE
- 80mm mounting spacing, 10-year warranty
The Detroit Axle kit covers all four corners of the 2018 to 2024 Camry: two front strut and coil spring assemblies and two rear shock absorbers. The listing names the SE, XSE, Hybrid SE, Hybrid XSE, Nightshade and TRD trims, the 2018 to 2019 XLE with the 3.5L V6, and front-wheel drive cars from 2020 on. It gives an 80mm mounting spacing and excludes several sport suspension versions of the Avalon, so check the fit notes for your car.
The front assemblies come complete and ready to install, without a spring compressor or other special tool. Detroit Axle says its strut assemblies go through impact, wear and fatigue testing, and the kit carries a 10-year warranty from the seller. Doing the rear shocks at the same time keeps the car balanced front to rear.
This kit suits an owner who wants to refresh the whole suspension in one order rather than buying corners one at a time. It is a practical choice for a sport-trim Camry that has covered high miles on rough pavement. If only the front struts are worn, the TRQ pair is the narrower buy, and LE or XLE owners need a different listing.
View Detroit Axle 4-Piece Kit on Amazon
Quick Fit Table for Camry Owners
Use this table to narrow the best struts for Camry models down to one or two listings, then check the part number against your VIN or the fit checker.
| Your Camry | Listing to check | Type | Watch for |
|---|---|---|---|
| 2012 to 2017, keep stock ride | Monroe Quick-Strut 172992 | Loaded, one corner | Buy the matching other side |
| 2012 to 2017, springs still good | KYB Excel-G 335076 | Bare strut | Needs a spring compressor |
| 2007 to 2011 | Gabriel Ultra ReadyMount G57191 | Loaded, front right | Left side sold separately |
| 2018 to 2024 SE or XSE | TRQ front set | Loaded pair | Not for LE or XLE |
| 2018 to 2024 L, LE or XLE | PM Auto front pair | Loaded pair | 68mm mounting spacing |
| 2018 to 2024 SE, full refresh | Detroit Axle 4-piece kit | Front struts plus rear shocks | 80mm mounting spacing |
Not every noise from the front end means the struts are finished. A squeak or creak over speed bumps often comes from a dry sway bar bushing or end link, which our post on why a car squeaks when going over bumps helps you track down.

What Grand Rapids Winters Do to Camry Struts
Freeze-thaw potholes, salted slush and long stretches of rough pavement wear struts faster than mild-climate driving does. A Camry is light and comfortable, so owners often get used to the slow decline and only notice it when the tires start to cup.
Look for a second bounce after a dip, a nose that dives under braking and wet oil running down the strut body. Gabriel’s ReadyMount page notes that a light film of oil on a damper is usually normal, and that cupped tires often point to worn ride control parts.

Salt also makes the job harder, since the lower strut bolts and top mount nuts rust in place over a few winters. Soak them with penetrating oil a day ahead, and plan to replace any nut that comes off with damaged threads.
Doing the Job Yourself or Handing It Over
With a loaded assembly, a front strut swap on a Camry is a reasonable driveway job for someone with a floor jack, stands and a good socket set. A bare strut is more involved, because a compressed coil spring stores a lot of energy and a slipped tool can hurt you.
Whichever of the best struts for Camry owners you choose, book a wheel alignment afterward. Removing the strut moves the camber and toe, and a car left out of spec pulls and wears the tire edges. Monroe’s Quick-Strut page also lists its Limited Lifetime Warranty terms, which are worth a look before you pick a brand.

If you would rather let us handle it, our suspension repair service in Grand Rapids covers struts, mounts, links and the steering parts around them. Owner and head mechanic Hendrick Hoffman is ASE and State of Michigan certified in steering and suspension work, and his background is on our about us page. For other sedans and crossovers, see our broader roundup of shocks and struts for daily drivers.
More Buying Guides
Frequently Asked Questions
Do the SE and LE Camry use the same struts?
Often not. On the 2012 to 2017 and 2018 to 2024 cars, SE and XSE trims have sport-tuned suspension with their own part numbers, so choose a listing that names your trim.
Should I replace the rear struts or shocks at the same time?
If the rear parts have the same mileage, it is usually worth doing all four. Fresh fronts with worn rears can leave the back of the car floating over dips.
Do I need an alignment after changing Camry struts?
Yes. Taking the strut out disturbs the front geometry, and an alignment keeps the steering centered and stops early tire wear.
Are single-side listings a problem?
No, but you need to order both sides. Listings such as the Monroe 172992 and Gabriel G57191 cover one corner, so buy the matching opposite part too.
Does your Camry bounce, clunk or dive on Grand Rapids roads? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a strut inspection through our contact page.
Working the same hours we are? Our after-hours drop-off lets you leave the Camry at 456 Carrier St NE once your day is done.
