As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Dodge has built three very different engine families over the last fifteen years, and each one asks for its own oil. The best motor oil for Dodge owners is simply the grade and Chrysler spec printed on the filler cap, in a bottle that says so plainly on the label.
This guide sorts the Pentastar V6, the 5.7 HEMI and the SRT engines, explains the MS numbers, then reviews six oils that suit them. For a wider look at full synthetics across all makes, see our roundup of the best synthetic oil for everyday cars.
Quick answer
What oil should go in a Dodge?
Most 5.7 HEMI Chargers, Challengers and Durangos call for 5W-20 meeting Chrysler MS-6395. Pentastar V6 manuals list 5W-20 or, on many later years, 0W-20. SRT and Scat Pack engines need 0W-40 to MS-12633, a spec Pennzoil lists for Ultra Platinum 0W-40. The filler cap and manual settle it.
Our Quick Picks
Three picks that cover the main Dodge engines: 5W-20 for the 5.7 HEMI, 0W-20 for later Pentastar V6 cars and 0W-40 for SRT and Scat Pack models. All six oils are reviewed below.

Mopar MaxPro 5W-20
The factory-brand 5W-20 that matches the grade printed on most 5.7 HEMI filler caps.

Mopar MaxPro+ 0W-20
Mopar's own full synthetic 0W-20 for the later engines whose cap calls for it.

Pennzoil Ultra Platinum 0W-40
The 0W-40 Pennzoil lists against Chrysler's SRT spec, MS-12633.
Three Engine Families, Three Oil Grades
Work out which engine sits under your hood first, because the same Charger body has carried a V6, a 5.7 V8 and two SRT engines.
- 3.6 Pentastar V6: found in V6 Chargers, Challengers, Durangos and the Grand Caravan and Journey. Earlier manuals list SAE 5W-20, and many later ones switched to 0W-20, so the model year matters here more than anywhere else.
- 5.7 HEMI V8: the R/T engine in Chargers, Challengers and Durangos. Factory manuals for these cars call for an API-certified 5W-20 that meets Chrysler MS-6395, and the cap usually says the same.
- 6.4 392 and 6.2 supercharged HEMI: Scat Pack, SRT 392, Hellcat and similar models. These manuals call for SAE 0W-40 meeting Chrysler MS-12633, a high-performance spec with its own approval list.
Running a heavier grade than the chart lists costs you on a modern engine. The U.S. Department of Energy notes that running the manufacturer’s recommended grade of motor oil can improve gas mileage by 1 to 2 percent, and that a thicker grade than specified lowers it by about the same.
Reading the Chrysler MS Number on the Bottle
Chrysler, now part of Stellantis, writes its own material standards and labels them “MS” followed by a number. MS-6395 covers the everyday 0W-20, 5W-20 and 5W-30 grades, while MS-12633 is the SRT-level 0W-40 test list. A bottle that names the MS number carries the oil maker’s claim that it passed those tests.
An oil with only the API SP mark and ILSAC starburst meets the general US standard. For SRT engines the gap is wider, since many 0W-40 bottles are made for European cars and do not claim MS-12633. Keep the receipt with brand, grade and spec on it if the car is under warranty.
Capacity also varies by engine, and a V8 usually holds more than a single five-quart jug. Look up the refill figure with the filter in your manual and buy enough to cover it. Our article on how long you can go without an oil change explains what the oil life monitor is tracking between visits.
Best Motor Oil for Dodge: Six Oils by Engine
The list starts with Mopar’s own oils, then moves to the SRT grade and three 5W-20 alternatives for the HEMI and older Pentastar engines. Check each listing against the grade on your cap before ordering.
1. Mopar MaxPro 5W-20: 5 Qt Genuine Chrysler Motor Oil for HEMI and V6 Engines

- SAE 5W-20, 5-quart jug
- Genuine Chrysler (Mopar) part
- API SN and ILSAC GF-5 on the listing
- Replaces several Mopar part numbers
MaxPro is the oil sold under Chrysler’s own Mopar parts brand, and this five-quart jug is the 5W-20 grade that most 5.7 HEMI manuals call for. The listing describes it as a genuine Chrysler part that replaces a string of earlier Mopar part numbers, which tells you it is the same product a Dodge dealer service department would reach for. It is also the grade many earlier Pentastar V6 cars list.
The listing shows API SN and ILSAC GF-5 marks, which were the current US ratings when this part number was set up. Newer stock may carry later API marks, so check the bottle you receive against the spec on your cap. The jug is a practical size for topping up between changes, and a HEMI owner doing a full change will usually need a second jug or a couple of extra quarts.
This is a sensible choice for an owner who wants the factory brand without a trip to the dealer. It does not suit SRT and Scat Pack engines, which need a 0W-40, and it is not the right grade for a later V6 whose manual lists 0W-20. Follow the oil life monitor rather than a fixed mileage figure.
View Mopar MaxPro 5W-20 on Amazon
2. Mopar MaxPro+ 0W-20: 1 Qt OE Full Synthetic Oil, Part 68523994AA

- SAE 0W-20 full synthetic
- Mopar part number 68523994AA
- Sold by the single quart
- Made to Mopar OE specifications
MaxPro+ is Mopar’s full synthetic line, and part 68523994AA is the 0W-20 grade sold here by the quart. Many later Pentastar V6 Chargers, Challengers and Durangos moved to 0W-20 in their manuals, and this is the factory-brand bottle for those cars. The listing describes it as a Mopar original equipment part made to the company’s fit, form and function standards.
The single-quart size makes it easy to buy the exact amount your engine takes with a filter, or to keep one bottle in the garage for top-ups. The 0W cold rating moves oil quickly on a winter start, which matters for the variable valve timing on the Pentastar. Because the listing text does not print the MS-6395 number itself, look at the label on the bottle you receive if you need it for warranty records.
Buying a full change by the quart costs more trips to the cart than a jug, so it suits owners who value the factory brand over convenience. It does not belong in a HEMI whose cap lists 5W-20 or in an SRT engine. Older V6 cars that list 5W-20 should stay with that grade too.
View Mopar MaxPro+ 0W-20 on Amazon

3. Pennzoil Ultra Platinum 0W-40: 6 x 1 Qt Full Synthetic for SRT and High-Performance Engines

- SAE 0W-40 full synthetic
- Case of six 1-quart bottles
- Made from natural gas base oil
- Designed for high-performance engines
Pennzoil Ultra Platinum in the 0W-40 grade has a long link with Dodge performance cars. Pennzoil introduced its Ultra 0W-40 as the oil Chrysler recommended for SRT engines, and its product page lists the Chrysler MS-12633 SRT spec for this grade. The Amazon listing describes it as a full synthetic for high-performance engines, made from natural gas, and sold as a case of six quarts.
For a 6.4 392 Scat Pack or SRT, or a supercharged 6.2, that spec is the reason to choose it over a general 0W-40. Many 0W-40 oils on the shelf are built for European cars and do not claim the Chrysler approval. The quart format also helps with the larger capacity of these engines, and a spare bottle is handy for track days or long highway runs.
The listing mentions a long-term engine warranty from Pennzoil, which comes with its own conditions, so read those terms rather than relying on the headline. This oil does not suit a 5.7 HEMI or a Pentastar V6, both of which list thinner grades. Confirm the spec on the label, since newer bottles may show an updated Chrysler number.
View Pennzoil Ultra Platinum 0W-40 on Amazon
4. Pennzoil Ultra Platinum 5W-20: 3 x 5 Qt Full Synthetic Made From Natural Gas

- SAE 5W-20 full synthetic
- Three 5-quart jugs
- Made from natural gas base oil
- Built for wide temperature swings
This is the 5W-20 version of Pennzoil’s top full synthetic, sold as three five-quart jugs. For a Dodge, the grade is the point: 5W-20 is what most 5.7 HEMI manuals and caps list, and it is also the grade for many earlier Pentastar V6 cars. Pennzoil makes the Ultra Platinum line from a base oil converted from natural gas, and the listing describes it as suited to high-performance engines and extreme temperatures.
The three-jug pack suits an owner who maintains more than one vehicle or plans several changes on a HEMI, since two jugs cover one V8 change with oil left over for top-ups. Buying in bulk also means you use the same oil change after change, which keeps the record simple if a warranty question ever comes up.
The listing does not print a Chrysler MS number, so check the back label for MS-6395 if your manual asks for it by name. Pennzoil’s long-term engine warranty is mentioned too, with its own conditions to read. This grade is wrong for an SRT engine that calls for 0W-40 and for a later V6 that lists 0W-20, and three jugs are more than a single-car owner may need for a while.
View Pennzoil Ultra Platinum 5W-20 on Amazon

5. Motul 8100 ECO-lite Gen2 5W-20: 1 L Full Synthetic Rated API SP and Chrysler MS-6395

- SAE 5W-20 full synthetic, 1 liter
- Lists Chrysler MS-6395 and FIAT 9.55535-CR1
- API SP and dexos1 Gen2
- Ford WSS-M2C945-A and 945-B1
Motul’s 8100 range is widely known for European oils, but the ECO-lite Gen2 line is aimed at American and Asian engines that use thin grades. This 5W-20 is one of the few listings in this guide that names Chrysler MS-6395 in its own text, alongside the FIAT 9.55535-CR1 spec, API SP, GM dexos1 Gen2 and several Ford numbers. For a Dodge owner who wants the spec in writing, that is a clear advantage.
The formula is described as low-friction, with protection against low-speed pre-ignition, timing chain wear and deposits. Those claims matter most on newer direct-injection engines, but the MS-6395 listing is what makes it a fit for a 5.7 HEMI or a 5W-20 Pentastar. It is sold by the liter, a little more than a quart, which helps when topping up between changes.
Buying a full HEMI change in one-liter bottles takes several units, so many owners will use it as a main oil only if they buy a case. It does not suit SRT engines that list 0W-40 or later V6 cars whose manual moved to 0W-20. As with any oil, the grade on your cap comes first.
View Motul 8100 ECO-lite 5W-20 on Amazon
6. Red Line 15205 5W20: 1 Gal Ester/PAO Full Synthetic Motor Oil

- SAE 5W-20 full synthetic, 1 gallon
- Polyol ester and PAO base stocks
- High-detergency formula
- Listed as popular for Chrysler engines
Red Line builds its motor oils from polyol ester and PAO base stocks, a different recipe from most shelf synthetics, and this gallon jug is the 5W-20 grade. The listing names Chrysler among the makes this grade is popular for, along with a Ford spec, and describes a high-detergency formula meant to keep the engine clean over longer drains. For a Dodge, it lines up with the 5W-20 that 5.7 HEMI manuals list.
The ester base gives a naturally strong oil film without leaning on heavy additive packages, which is why Red Line has a following among owners of modified or hard-driven V8s. A gallon covers four quarts, so a HEMI change will need this jug plus a few extra quarts of the same oil. It is also a reasonable choice for an earlier Pentastar V6 whose manual lists 5W-20.
The listing does not state a Chrysler MS-6395 approval, so owners who need that exact number on their warranty records should choose an oil that prints it. Red Line also sells fewer sizes in parts stores, which makes top-ups harder away from home. It is the wrong grade for an SRT engine or a 0W-20 V6.
Matching Your Dodge to a Bottle
Choosing the best motor oil for Dodge engines is easier once you match the row to your car. Confirm the grade for your model year in the manual, since the V6 recommendation has changed over time.
| Engine | Typical models | Grade and spec | Oils reviewed here |
|---|---|---|---|
| 3.6 Pentastar V6, later years | Charger, Challenger, Durango V6 | 0W-20, MS-6395 | Mopar MaxPro+ 0W-20 |
| 3.6 Pentastar V6, earlier years | Charger, Grand Caravan, Journey | 5W-20, MS-6395 | Mopar MaxPro 5W-20, Motul 8100 ECO-lite 5W-20 |
| 5.7 HEMI V8 | Charger R/T, Challenger R/T, Durango R/T | 5W-20, MS-6395 | Pennzoil Ultra Platinum 5W-20, Red Line 5W20, Mopar MaxPro 5W-20 |
| 6.4 392 or 6.2 supercharged | Scat Pack, SRT 392, Hellcat | 0W-40, MS-12633 | Pennzoil Ultra Platinum 0W-40 |

A lifter tick on startup is a frequent complaint on high-mileage HEMI engines. Fresh oil of the right grade will not cure a worn lifter, so if the tick stays once the engine warms, have it checked rather than switching to a thicker oil.
Dodge Oil Care Through a Grand Rapids Winter
A Charger or Durango that sits outside overnight in a West Michigan January starts on oil that has thickened in the pan. The first number in the grade is the cold rating, and it decides how fast oil reaches the cam and lifters in the first seconds. Our guide to the best motor oil for cold weather covers the pumping tests behind that number.
Short trips that never warm the engine fully leave water and fuel in the oil, and a creamy film under the filler cap is the giveaway. On that kind of winter use, the best motor oil for Dodge cars is the right grade changed before the monitor reaches zero.

Check the dipstick every few fill-ups, especially on a high-mileage V8. Our article on Audi 2.0T oil consumption is about another brand, yet its method of measuring how much oil an engine uses per thousand miles works on a HEMI just as well.
Signs Your Dodge Needs More Than an Oil Change
Some problems show up during an oil change but are not solved by one. A red oil pressure warning, a knock that rises with engine speed, blue smoke on startup or oil spots under the car all need a diagnosis. Our guide to an oil pressure light that comes on explains what to do if the warning appears while driving.

Our shop works on foreign and domestic vehicles, including Dodge cars and SUVs, and handles oil changes along with factory scheduled maintenance. You can book an oil change in Creston and we will fill the engine with the grade your manual lists.
More Buying Guides
Frequently Asked Questions
What is the best motor oil for Dodge Charger models with the 5.7 HEMI?
A 5W-20 that names Chrysler MS-6395 on the label, unless your manual or cap lists a different grade. Mopar MaxPro, Pennzoil Ultra Platinum and Motul 8100 ECO-lite all come in that grade.
Do I have to use Mopar oil to keep my Dodge warranty?
No. The manual asks for a grade and a Chrysler spec, not a brand. Any oil that meets them is acceptable, and keeping receipts that show brand, grade and spec covers you if a question comes up.
Which oil suits a Dodge Durango?
It depends on the engine. A Durango with the 3.6 V6 usually takes 0W-20 or 5W-20 by model year, the 5.7 HEMI takes 5W-20, and the SRT 392 takes 0W-40 to MS-12633. Check the cap before buying.
Can I use any 0W-40 in a Scat Pack or Hellcat?
Not every 0W-40 qualifies. Many are built to European specs and do not claim Chrysler MS-12633, which these manuals call for. Pennzoil Ultra Platinum 0W-40 lists that spec on Pennzoil’s product page.
Want the oil change done for you? Call 456 AutoFix at 616-279-3832 on a weekday between 8am and 5pm, or pick a time on our contact page.
Working late? Our after-hours drop-off means you can leave the keys with us and pick the car up later. You’ll find us at 456 Carrier St NE in Creston, Grand Rapids.
