As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Wrangler can leave the factory with a Pentastar V6, a turbo four or a 392 V8, and those engines do not share an oil grade. The best oil for Jeep Wrangler owners is the viscosity and Chrysler spec your engine was designed around, bought in a bottle that states it.
Below we sort out the JK and JL engines, show how to read the spec on a label, then review five oils that match the gasoline V6 and V8. If you want a wider field of full synthetics for other vehicles too, our list of the best synthetic oil picks for daily drivers covers them.
Quick answer
Which oil goes in a Jeep Wrangler?
A 2018 or newer JL with the 3.6 V6 takes 0W-20 meeting Chrysler MS-6395. Most JK 3.6 manuals list 5W-20 to the same spec. The 2.0 turbo calls for 5W-30 to MS-13340, and the 392 needs 0W-40 to MS-12633. Your filler cap and manual have the final word.
Our Quick Picks
Three picks that cover the main gasoline Wrangler engines: 0W-20 for the JL V6, 5W-20 for most JK V6 years and 0W-40 for the 392. All five oils are reviewed below.

Liqui Moly Special Tec AA 0W-20
A 0W-20 that Liqui Moly recommends for engines calling for Chrysler MS-6395.

Liqui Moly Special Tec AA 5W-20
The 5W-20 grade most JK manuals list, with the Chrysler spec on the maker's page.

Mopar 0W-40 (Pennzoil Ultra Platinum)
The Mopar-branded 0W-40 in a quantity close to a full 392 fill.
Know Your Wrangler Engine Before You Shop
Two Wranglers parked side by side can need different oil, so start with the engine, not the trim badge. Pop the hood and read the filler cap, which on most of these engines prints the grade.
- JL 3.6 Pentastar V6 (2018 on): the most common Wrangler engine. Its manual asks for SAE 0W-20 that meets Chrysler MS-6395, and the sump holds about five quarts with a new filter.
- JK 3.6 Pentastar V6 (2012 to 2018): most of these manuals list SAE 5W-20 to MS-6395, with a fill of roughly six quarts. A few early copies show 5W-30, which is one more reason to trust the cap over a forum post.
- 2.0 turbo four and 4xe hybrid (JL): a different spec family. These engines call for 5W-30 meeting MS-13340.
- 6.4 392 HEMI V8 (JL Rubicon 392): needs 0W-40 meeting MS-12633, the performance spec Stellantis also uses on its SRT engines.
Older JK models with the 3.8 V6, the TJ and diesel versions sold in other markets each have their own chart. If yours is one of them, the manual’s engine oil page is the place to look before ordering anything.
What the MS Number on the Label Tells You
Chrysler, now Stellantis, publishes its own oil standards and gives each one an “MS” code. When a bottle names MS-6395, the oil maker is stating that the product meets that standard. A bottle that only shows the API SP mark and the ILSAC starburst meets the general US rating, which is a lower bar to clear than a carmaker’s own list.
Some brands phrase it carefully. Liqui Moly, for example, says it recommends Special Tec AA 0W-20 where Chrysler MS-6395 is required, which is a recommendation rather than a factory approval. That difference rarely matters on an older Jeep, but on a Wrangler still under warranty, keep receipts that show brand, grade and spec.
Buy enough for the whole fill. A JK usually needs a second jug or an extra quart, and the 392 holds close to seven quarts. If you stretch changes on a Jeep that sits most of the week, our article on how long you can go without an oil change explains what time does to oil even when the miles stay low.
Best Oil for Jeep Wrangler: Five Bottles by Engine
We grouped the five oils by grade: two 0W-20s for the JL V6, two 5W-20s for the JK V6 and one 0W-40 for the 392. Read each listing against your filler cap before you order.
1. Liqui Moly Special Tec AA 0W-20: 1 L Full Synthetic for Asian and American Engines

- SAE 0W-20 full synthetic, 1-liter bottle
- Maker recommends it where Chrysler MS-6395 is required
- API SQ and ILSAC GF-7A on Liqui Moly's page
- Suited to direct-injection and turbo engines
Special Tec AA is the line Liqui Moly builds for Asian and American gasoline engines, and the 0W-20 grade is the one the JL Wrangler’s 3.6 Pentastar calls for. On its US product page, Liqui Moly says it recommends this oil for engines that require Chrysler MS-6395, alongside Ford, GM dexos1 Gen 3 and several Japanese specs. The same page lists API SQ and ILSAC GF-7A, the newest US ratings.
This listing is the 1-liter bottle, so plan on five of them for a typical JL change with a new filter. That makes it handy for topping up between changes or for owners who like to buy exactly what the sump holds. The maker describes a fully synthetic, low-viscosity formula meant to keep the engine clean and to hold up over extended drain intervals, and it says the oil suits direct-injection and turbocharged engines.
This bottle makes sense for a Wrangler owner who wants a German-made synthetic that names the Chrysler spec on the maker’s own page. It is the wrong grade for most JK models, whose manuals list 5W-20, and it does not suit the 392 or the 2.0 turbo. Follow the oil life monitor, and shorten the interval after hard trail use.
View Liqui Moly Special Tec AA 0W-20 on Amazon
2. Castrol GTX Full Synthetic 0W-20: 5 Qt Motor Oil with API SP and ILSAC GF-6

- SAE 0W-20 full synthetic, 5-quart jug
- API SP and ILSAC GF-6 on the listing
- GM dexos1 Gen 3 and Ford specs listed
- Rated for 10,000 miles between changes
Castrol moved its long-running GTX name onto a full synthetic line, and this five-quart jug is the 0W-20 grade. The listing shows the API SP and ILSAC GF-6 marks, GM dexos1 Gen 3 and two Ford specs. It does not name Chrysler MS-6395, so read that line on the label before pouring it into a Wrangler still under factory warranty.
One jug covers the roughly five quarts a JL 3.6 holds with a new filter, which keeps the shopping simple. Castrol says the formula offers stronger wear and sludge protection than industry standards and is built for up to 10,000 miles between changes, measured in its own comparisons against API limits. On a Jeep, the oil life monitor and your driving pattern should still set the actual interval.
This is a sensible pick for a JL owner past the warranty period who wants a full synthetic in the right grade that most parts stores also carry. If your Jeep is new and you want the Chrysler spec stated in writing, the Liqui Moly 0W-20 above is the closer match. This grade also does not suit a JK that lists 5W-20 or the 392 V8.
View Castrol GTX Full Synthetic 0W-20 on Amazon

3. Liqui Moly Special Tec AA 5W-20: 5 L Full Synthetic for Chrysler MS-6395 Engines

- SAE 5W-20 full synthetic, 5-liter can
- Maker recommends it where Chrysler MS-6395 is required
- Compatible with turbochargers and catalytic converters
- Mixes with other commercial motor oils
This is the 5W-20 grade of the same Special Tec AA line, and it matches what most JK Wrangler manuals list for the 3.6 Pentastar. Liqui Moly’s product page includes Chrysler MS-6395 among the specs it recommends the oil for, and gives API SQ and ILSAC GF-7A as its ratings. The listing adds that it is compatible with turbochargers and catalytic converters and mixes with other commercial motor oils.
The five-liter can holds a little over five quarts, so a JK change of about six quarts needs an extra quart on top. That is worth knowing before you drain the pan on a Saturday morning. The listing points to stability against aging, engine cleanliness and lower fuel use, which fits a Jeep that sees mixed commuting and weekend driving.
This oil suits JK owners who want a synthetic that names the Chrysler spec on the maker’s own page. It is not the grade for a JL, which calls for 0W-20, and early JK copies that list 5W-30 on the cap should follow the cap instead. Confirm your model year in the manual before you buy a full can.
View Liqui Moly Special Tec AA 5W-20 on Amazon
4. Castrol GTX Full Synthetic 5W-20: 5 Qt Motor Oil Rated API SP and ILSAC GF-6

- SAE 5W-20 full synthetic, 5-quart jug
- API SP and ILSAC GF-6 on the listing
- Meets Ford WSS-M2C945-B1 and 960-A1
- Rated for 10,000 miles between changes
This is the 5W-20 grade of Castrol’s GTX Full Synthetic line, sold in a five-quart jug. The listing gives API SP and ILSAC GF-6 along with two Ford specs, WSS-M2C945-B1 and WSS-M2C960-A1. It does not mention Chrysler MS-6395, so treat it as an oil that meets the general US standard rather than one that claims the Jeep spec.
A JK 3.6 holds about six quarts, so one jug plus a spare quart covers a full change with a new filter. Castrol describes the formula as offering stronger wear and sludge protection than industry test limits and lasting up to 10,000 miles between changes. On a Wrangler driven in dust, water or short winter trips, the severe schedule in the manual is the better guide.
This oil fits an older JK that is out of warranty and whose owner wants a full synthetic in the right grade at almost any parts store. If you want the Chrysler spec stated by the maker, the Liqui Moly 5W-20 is the closer match. It is not the right grade for a JL, a 392 or a 2.0 turbo.
View Castrol GTX Full Synthetic 5W-20 on Amazon

5. Mopar Pennzoil Ultra Platinum 0W-40: 7 Qt Full Synthetic Kit for 392 HEMI Engines

- SAE 0W-40 full synthetic, 7 quarts
- Mopar-packaged Pennzoil Ultra Platinum
- Grade the 392's manual calls for
- Covers a full 392 fill in one order
The 6.4 HEMI in the Wrangler Rubicon 392 needs 0W-40 meeting Chrysler MS-12633, a different oil from anything the V6 uses. This Mopar listing packages Pennzoil Ultra Platinum 0W-40, the brand Stellantis manuals name as an example for that spec, in a set of seven quarts. The listing title is all the detail it gives, so check the bottles you receive for the grade and MS number.
Seven quarts is close to what the 392 takes with a new filter, so one order should cover the whole change. Buying the Mopar version keeps the factory parts brand on your receipts, which some owners prefer while the Jeep is under warranty. Pennzoil sells the same oil under its own label in quart packs, and either one matches the grade the manual lists.
This kit suits a 392 owner who wants the factory-brand oil in the right quantity without a dealer visit. It does not suit the 3.6 V6 or the 2.0 turbo, which use thinner grades. Many 0W-40 oils are built for European cars and do not claim MS-12633, so do not swap in a random 0W-40 from the shelf.
View Mopar 0W-40 (Pennzoil Ultra Platinum) on Amazon
Pairing Each Wrangler With a Grade
The table lines up each engine with its grade and the oils from this list that come in it. There is no 2.0 turbo pick because none of the 5W-30 listings we could check names MS-13340, so look for that number on the bottle itself or ask a Jeep parts counter for the Mopar 5W-30.
| Wrangler engine | Grade | Chrysler spec | Oils in this guide |
|---|---|---|---|
| JL 3.6 Pentastar V6 | 0W-20 | MS-6395 | Liqui Moly Special Tec AA 0W-20, Castrol GTX Full Synthetic 0W-20 |
| JK 3.6 Pentastar V6 | 5W-20 (most years) | MS-6395 | Liqui Moly Special Tec AA 5W-20, Castrol GTX Full Synthetic 5W-20 |
| JL 2.0 turbo and 4xe | 5W-30 | MS-13340 | None listed: buy a bottle that names MS-13340 |
| JL 392 HEMI V8 | 0W-40 | MS-12633 | Mopar 0W-40 (Pennzoil Ultra Platinum) |

If the cap on a JK reads differently from this table, follow the cap. Jeep updated its recommendations more than once during the JK run, and a dealer may also have swapped a cap during earlier service. In the end, the best oil for Jeep Wrangler engines is the one your cap and manual agree on.
Trail Use, Short Trips and Michigan Winters
Plenty of Wranglers here spend weekdays on short commutes and weekends on muddy two-tracks. Both count as severe service in most owner’s manuals, and so do dusty trails, water crossings and towing a trailer. On that schedule, change the oil when the monitor asks for it or sooner, rather than waiting for a round number.
Cold mornings are where the first number in 0W-20 or 5W-20 earns its keep. A lower winter rating lets oil reach the cam phasers and timing chain faster on a frosty start. Our guide to the best motor oil for cold weather explains how that rating is measured.

Checking the dipstick between changes is worth the minute it takes, especially after a long highway run or a day off road. Our write-up on Audi 2.0T oil consumption covers a different engine, but its way of measuring how much oil is used per thousand miles works just as well on a Pentastar.
Salt and slush also cake the underside of the engine through a Grand Rapids winter. That grime can hide a slow leak from the oil filter housing or pan, so give the area a look whenever the Jeep is up on ramps.
When a Wrangler Needs a Mechanic Instead
Some oil problems point to a repair, not a fresh fill. Oil collecting around the filter area, a low oil pressure warning, a ticking noise that follows engine speed or a level that drops quickly between changes all deserve a proper look.

We service foreign and domestic vehicles, Jeeps included, and oil changes are part of our factory scheduled maintenance work. Book an oil change in Creston and we will use the grade printed on your cap and in your manual.
More Buying Guides
Frequently Asked Questions
What is the best oil for Jeep Wrangler JK models?
For most JK Wranglers with the 3.6 V6, a 5W-20 that meets Chrysler MS-6395. Liqui Moly lists that spec for its Special Tec AA 5W-20. Some early JK manuals show a different grade, so read the filler cap first.
Can I put 5W-30 in my Wrangler 3.6?
Only if your manual allows it. The JL lists 0W-20, and the JK manuals we checked list 5W-20, with 5W-30 allowed only as a fallback when 5W-20 is not available. Going back to the listed grade at the next change is the safer habit.
Do I need Mopar oil to keep my Jeep warranty?
No. The manual names a grade and a Chrysler spec rather than a brand. Any oil that meets both is acceptable, and receipts that show brand, grade and spec are your record if a question ever comes up.
How much oil does a Jeep Wrangler hold?
Roughly five quarts for a JL 3.6, about six for a JK 3.6 and close to seven for the 392, each with a new filter. Check the capacity table in your manual and the dipstick after filling.
Rather have someone else crawl under the Jeep? Ring 456 AutoFix at 616-279-3832 any weekday from 8am to 5pm, or request a slot through our contact page.
If the workday runs long, our after-hours drop-off lets you leave the Wrangler and the keys with us overnight. The shop sits at 456 Carrier St NE in the Creston neighborhood of Grand Rapids.
