456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Silverado to F-150: The Best Ball Joints for Trucks by Model

best ball joints for trucks: black and white photo of a pickup on a road

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A pickup puts more weight on its front suspension than almost any car, and the ball joints carry that load every time the wheel turns or drops into a hole. The best ball joints for trucks are the part numbers built for your exact truck, axle position and drivetrain, not a generic part sold as fitting everything.

Below are six listings for the Silverado and Sierra, the Tundra, the Titan and the F-150. For sedans, see our guide to the best ball joints for common cars, and to confirm a joint is worn, check our list of bad ball joint symptoms.

Quick answer

Which ball joint should I put on my pickup?

Match the joint to your truck, year and position. TRW JBJ1007 covers the 1999-2016 Silverado 1500 lower, ACDelco Gold and a Detroit Axle pair suit GM 2500HD trucks, and MOOG lists Tundra, Titan and F-150 joints. Check fit in Amazon’s fit checker and book an alignment afterward.

Our Quick Picks

Three listings for the most common truck jobs: a half-ton GM lower joint, a heavy duty GM pair and a late-model F-150 lower joint. All six are reviewed below.

TRW JBJ1007 product photo
Half-ton GM pick

TRW JBJ1007

Front lower joint

An OE-supplier lower joint that spans three generations of GM half-tons.

Suits1999-2016 Silverado and Sierra 1500 owners
View on Amazon →
Detroit Axle 2pc lower ball joints product photo
Heavy duty pair

Detroit Axle 2pc lower ball joints

2 front lower joints

Both lower joints for the newer GM HD trucks in a single order.

Suits2011-2024 Silverado and Sierra 2500 HD and 3500 HD owners
View on Amazon →
MOOG K500318 product photo
F-150 pick

MOOG K500318

Front lower joint

A MOOG lower joint for the aluminum-body F-150.

Suits2015-2020 F-150 owners
View on Amazon →

Why Truck Ball Joints Wear Differently

Most full-size pickups use a short-long arm front end with an upper and a lower joint on each side. On many of these trucks the lower joint holds up the weight of the engine through the coil spring or torsion bar, so it usually wears first. The upper joint mostly steers and locates the knuckle, and it tends to last longer unless the truck has been lifted.

A diesel, a plow mount or a loaded bed adds to that load, which is why a 2500HD joint is larger than a 1500 joint. When you compare listings, check these points:

  • Position: upper and lower joints are different parts, and some listings are side-specific.
  • Drivetrain and arm type: 2WD and 4WD trucks, and steel versus aluminum lower arms, can take different joints.
  • Greasable or sealed: a fitting only helps if someone uses it.
  • Mounting: most of these press into the arm and need a C-frame press.

If you are doing the work yourself, our roundup of the ball joint press kits worth owning covers the tool side.

Stock, Heavy Duty or Lifted: Picking the Right Type

For a stock truck that tows now and then, a factory-style joint from a known chassis brand such as MOOG, TRW, ACDelco or Mevotech is the sensible choice.

Lifted trucks are a different case. A leveling kit or lift changes the angle the upper joint works through, and many lift kits replace the factory upper arm with one that carries its own joint. In that case the replacement comes from the arm maker, not from a catalog listing for the stock truck.

Heavy duty joints with larger studs suit plow trucks and big tires. Most daily-driven pickups only need the correct stock joint, torqued and greased properly.

Best Ball Joints for Trucks: Six Listings by Model

Each listing below names a truck, a year range and a position. Cab style, drivetrain and arm material can change the part, so enter your truck in Amazon’s fit checker before you order.

1. TRW JBJ1007: Front Lower Ball Joint for 1999-2016 Silverado and Sierra 1500

TRW JBJ1007 product photo
Key features
  • Front lower, sold singly
  • Listing names 1999-2016 Silverado and Sierra 1500
  • Also lists Tahoe, Yukon, Escalade and Avalanche
  • 500K-cycle endurance testing per TRW

TRW JBJ1007 is a front lower ball joint with an unusually wide fit list. The Amazon listing names the Chevrolet Silverado 1500 and GMC Sierra 1500 from 1999 to 2016, plus the Tahoe, Yukon, Escalade, Avalanche, Suburban 1500 and Express 1500 across various years. That range covers the GMT800, GMT900 and early K2 half-ton trucks, which makes it one of the most common joints in GM fleets.

TRW, part of ZF, states that every part passes four levels of testing and audit review before approval, including endurance testing of 500,000 cycles. The listing describes a low-friction design meant to return the steering and suspension to their original feel, and dust covers made from high-quality rubber. One joint comes per box, so a two-sided job needs two orders.

This joint suits a stock half-ton that sees daily driving, light towing and winter roads. The lower joint is the load-carrying one on these trucks, so it is the usual source of a front-end clunk. Arm material and drivetrain changed over these years, and some later trucks use aluminum or stamped steel arms with different joints. Use the listing’s Confirmed Fit option with your exact year, cab and 2WD or 4WD setup before you buy.

View TRW JBJ1007 on Amazon

2. ACDelco Gold 45D2363: Forged Front Lower Ball Joint for 2001-2010 2500 HD

ACDelco Gold 45D2363 product photo
Key features
  • Front lower, GM part 19460321
  • One-piece forged housing
  • Greaseable design
  • Coated for corrosion resistance

ACDelco Gold 45D2363 is a front lower ball joint that carries GM part number 19460321. The listing names the 2001 to 2010 Chevrolet Silverado 2500 HD and GMC Sierra 2500 HD with the 6.0L and 6.6L engines, along with 2007 to 2010 3500 HD trucks, the 2005 to 2007 Hummer H2 and the Yukon XL 2500. Gold is the higher of ACDelco’s two aftermarket lines.

The listing describes a one-piece forged housing for strength, a greaseable design and a coating for corrosion resistance. ACDelco says its joints go through impact, wear and fatigue testing, and that they are made at TS 16949-certified facilities. For a truck that carries a diesel engine and often a plow frame, a forged housing is a reasonable feature to look for.

This joint suits owners of older GM heavy duty trucks who want a GM-branded part with a grease fitting. These trucks use torsion bars, so the lower joint takes most of the front-end weight and is the one most often found loose at inspection. Some 2500 models of these years, such as light duty 2500 trucks, use different parts, so confirm yours with the fit checker before you order.

View ACDelco Gold 45D2363 on Amazon

mechanic working on a red truck

3. Detroit Axle 2pc: Front Lower Ball Joints for 2011-2024 Silverado and Sierra 2500 HD

Detroit Axle 2pc lower ball joints product photo
Key features
  • Two front lower joints in one kit
  • Listing names 2011-2024 Silverado and Sierra 2500 HD
  • Also lists 3500 HD of the same years
  • 10-year warranty per the listing

This Detroit Axle kit holds two front lower ball joints, one for each side. The listing names the 2011 to 2024 Chevrolet Silverado 2500 HD and 3500 HD and the GMC Sierra 2500 HD and 3500 HD, plus Mexican-market Silverado 2500 and 3500 trucks and the 2012 to 2013 Cheyenne 2500. That covers the GMT900, K2 and T1 heavy duty generations.

Detroit Axle says these joints go through impact, wear and fatigue testing, and the listing states a 10-year warranty. Buying a pair makes sense on an HD truck, because both lower joints have carried the same weight over the same miles. If one side has play, the other side is usually not far behind, and doing both together means one alignment.

This kit suits owners of newer GM heavy duty trucks who want both sides in one box rather than ordering two singles. These trucks are often used for towing and plowing, which loads the lower joints hard. They are typically pressed into the control arm, so you will need a heavy duty press and the right adapters, or a shop with them. Check your exact model and year in Amazon’s fit checker before ordering.

View Detroit Axle 2pc lower ball joints on Amazon

4. MOOG K500224: Front Lower Ball Joint for 2007-2021 Tundra and Sequoia

MOOG K500224 product photo
Key features
  • Front lower, sold singly
  • Listing names 2007-2021 Tundra
  • Also lists 2008-2022 Sequoia
  • Also fits Land Cruiser and Lexus LX570

MOOG K500224 is a front lower ball joint for Toyota’s large body-on-frame vehicles. The Amazon listing names the 2007 to 2021 Toyota Tundra, the 2008 to 2022 Sequoia, the 2008 to 2021 Land Cruiser and the 2008 to 2021 Lexus LX570. That makes it the joint for the whole second-generation Tundra run, from the first 5.7L trucks to the last ones before the redesign.

MOOG is part of DRiV, and the listing describes the joint as a key pivot in the suspension, built to handle road stress and help restore steady steering. It also says the joint supports proper alignment and consistent control in daily driving. MOOG lists its brand features, such as boot and bearing designs, on its own site, though not every part number has every one, so look at the listing photos for the hardware and any fitting.

Tundra lower joints are generally durable, but high-mileage trucks that tow or see rough roads do wear them out. A worn one can show up as a clunk over bumps or slight wander on the highway. One joint comes per box, so plan for two if you do both sides. Confirm your year, cab and drivetrain in Amazon’s fit checker before you order.

View MOOG K500224 on Amazon

old car interior through dusty glass

5. MOOG K80994: Front Upper Ball Joint for 2004-2023 Nissan Titan

MOOG K80994 product photo
Key features
  • Front upper, sold singly
  • Listing names 2004-2023 Titan
  • Also lists 2005-2015 Armada
  • Also fits 2004-2010 Infiniti QX56

MOOG K80994 is a front upper ball joint, and the Amazon listing names the Nissan Titan from 2004 to 2023. It also lists the 2004 Pathfinder Armada, the 2005 to 2015 Armada and the 2004 to 2010 Infiniti QX56. That covers both generations of the Titan, which shared much of its front suspension with Nissan’s large SUVs.

On many Titans the upper joint is sold as part of the upper control arm, so a separate joint like this one gives another route when the arm and its bushings are still sound. Check how your factory joint is mounted, since some trucks need the arm replaced and others take a separate joint. MOOG describes this part as a suspension pivot built to handle road stress and help restore steering stability.

The upper joint on the Titan works hard on trucks with leveling kits or larger tires, which steepen its angle. Symptoms of wear include a knock when turning at low speed and uneven wear on the front tires. One joint comes per box, so order two for both sides. Engine, drivetrain and year can change the part, so confirm your truck in Amazon’s fit checker first.

View MOOG K80994 on Amazon

6. MOOG K500318: Front Lower Ball Joint for 2015-2020 Ford F-150

MOOG K500318 product photo
Key features
  • Front lower, sold singly
  • Listing names 2015-2020 F-150
  • Also lists 2018-2022 Expedition and Navigator
  • Replaces Ford FL3Z3050A and FL3Z3050B

MOOG K500318 is a front lower ball joint for the 13th-generation Ford F-150. The Amazon listing names the 2015 to 2020 F-150, the 2018 to 2022 Expedition and Lincoln Navigator, and the 2017 to 2022 Ford GT. It lists Ford part numbers FL3Z3050A and FL3Z3050B among the numbers it replaces, which helps if you are checking against an old invoice.

The listing describes the joint as an OE-grade replacement that acts as a key suspension pivot and helps restore steering stability. MOOG, part of DRiV, says it is built to handle road stress across a range of driving conditions. As with other MOOG listings, check the photos and the box for the hardware included before you start the job.

This joint suits F-150 owners with a stock or lightly leveled truck who want a well-known chassis brand. The F-150 is the most common pickup on the road, and its lower joints take the load of daily hauling and winter potholes. One joint comes per order, so buy two for a two-sided repair. Trim, drivetrain and suspension package can change the part, so confirm your truck in Amazon’s fit checker before you buy.

View MOOG K500318 on Amazon

Quick Fit Table for Each Pickup

Find your truck in the left column, then confirm the exact part number against your VIN or the fit checker.

TruckListingPositionNotes
Silverado/Sierra 1500, 1999-2016TRW JBJ1007Front lowerAlso listed for Tahoe and Yukon
Silverado/Sierra 2500 HD, 2001-2010ACDelco Gold 45D2363Front lowerForged housing, greaseable
Silverado/Sierra 2500 HD and 3500 HD, 2011-2024Detroit Axle pairFront lower, both sidesTwo joints in one box
Tundra, 2007-2021MOOG K500224Front lowerAlso listed for Sequoia
Titan, 2004-2023MOOG K80994Front upperAlso listed for Armada
F-150, 2015-2020MOOG K500318Front lowerAlso listed for Expedition
The best ball joints for trucks in this guide, by model, years and position as each listing names them

Most are sold one joint per box. If one lower joint has play, check the other side and both uppers while the truck is in the air, since all four have covered the same miles and the same winter roads.

black and white photo of a pickup on a gravel road

Plow Season, Brine and Grand Rapids Potholes

West Michigan trucks get a hard life up front. Winter brine coats the boots for months, and once a boot tears the salt water reaches the stud and the bearing. Spring then brings freeze-thaw potholes that slam the lower joints at speed.

If your joints have grease fittings, a few pumps at every oil change pushes moisture out before it does damage. Watch the boot as you pump: it should swell a little, not split. The Car Care Council’s steering and suspension overview suggests a yearly check of these systems, usually with an alignment, and names chassis lubrication as one of the factors in how fast parts wear.

Worn shocks let the wheel bounce harder into every hole, which speeds up joint wear too. Our guide to shocks and struts for daily drivers covers when they are due.

mechanic in overalls by a blue truck

Doing the Job Safely, or Handing It to Us

A ball joint holds the steering knuckle to the truck, so a mistake here can let a wheel fold under. Support the frame on rated stands, wear eye protection when you break a tapered stud loose or run the press, and torque the castle nut to the factory figure before the cotter pin goes in.

New joints shift camber and toe slightly. Have the alignment set after the job, or the front tires can start to feather within a few weeks of driving.

pickup crossing a shallow creek

Seized joints and rusted knuckles can stretch a weekend job. Our shop handles truck and car suspension repair in Grand Rapids, from the first check for play to the alignment once the new joints are in.

Frequently Asked Questions

Who makes the best ball joints for trucks?

No one brand wins on every truck. MOOG, TRW, ACDelco, Mevotech and Detroit Axle all list joints for full-size pickups, and the right choice is the part number made for your truck, year and position.

Do upper or lower ball joints wear out first on a pickup?

On most full-size trucks with the spring on the lower arm, the lower joint carries the weight and wears first. Lifted trucks can wear the upper joints faster because of the steeper working angle.

Do lifted trucks need special ball joints?

Often, yes. Many lift kits use aftermarket upper control arms with their own joints, so you replace those with the arm maker’s part. A truck on a small leveling kit with factory arms usually takes the stock part number.

Is your pickup clunking over driveway lips or wandering on the highway? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or ask for a front end check on our contact page.

If the truck is busy hauling all day, bring it by after hours to 456 Carrier St NE and leave the keys with a short note about the noise and which wheel it seems to come from.