As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Ram 5500 spends its life carrying a dump body, a plow frame or a full service bed, and the front ball joints take a big share of that weight. Picking the best ball joints for Ram 5500 trucks starts with one fact many shoppers miss: the chassis cab uses its own upper and lower part numbers, and the kits sold for the 2500 and 3500 pickups are not the same parts.
This guide covers joints whose listings name the 2008-2010 Dodge Ram 5500 and the 2011 and later Ram 5500, most of which also list the 4500. If you are still working out whether the front end noise is a joint at all, start with our list of bad ball joint symptoms.
Quick answer
Which ball joints fit a Ram 5500?
Look for parts that cross to Mopar 68034496AA for the upper joint and 68034497AA for the lower. MOOG K500138 and K500176 are single OE-style replacements, Metrix and A-Premium sell pairs, and MOOG K100140 is an adjustable upper for alignment trouble. Confirm year and drivetrain on Amazon first.
Our Quick Picks
Three listings that cover the main Ram 5500 front end jobs. Confirm your year and drivetrain on Amazon before you order.

MOOG K500176
A one-piece MOOG replacement for the lower joint on the 4500 and 5500 chassis cab.

MOOG K500138
The standard MOOG upper joint for the chassis cab, for trucks that align normally.

MOOG K100140
An adjustable upper joint for trucks that will not align with stock parts.
Why the Chassis Cab Needs Its Own Joints
The Ram 4500 and 5500 share a cab and much of their look with the 3500 pickup, but the front axle hardware is sized for a much heavier truck. On its Chassis Cab lineup page, Ram lists a maximum gas payload of 12,260 lb for 2026 5500 models. Front joints for a truck in that class are separate part numbers from the ones in a pickup.
That is why searches for Ram ball joints turn up so many wrong answers. Popular 2500 and 3500 parts such as the MOOG K7460 upper do not list the 4500 or 5500 at all, while every listing below names the chassis cab.
Ram builds the chassis cab as a 4×2 or a 4×4, and most listings name years rather than drivetrain, so note both before you shop and let Amazon’s fit checker have the final word.
Upper, Lower or Adjustable
Each front corner of a Ram 5500 has one upper and one lower joint. The lower usually carries more of the weight and often wears first, but the upper takes a beating too when the truck runs a plow or a heavy front bumper.
- Single OE-style joints: the right call when one position is loose and the others check out tight.
- Pairs: two uppers or two lowers in one box, so both sides of the axle get matching parts.
- Adjustable uppers: an offset design that lets an alignment shop correct caster or camber when standard parts leave the truck out of spec.
Grease is not a small detail on a truck like this. The Car Care Council, in its vehicle systems overview, lists pothole-heavy operating conditions and how often chassis lubrication is done among the factors that affect steering and suspension wear. It also suggests a steering and suspension check at least once a year, usually with a wheel alignment.
Best Ball Joints for Ram 5500: Upper and Lower Picks
These six listings each name the Ram 5500 and a front position. Treat them as a shortlist and confirm your truck in Amazon’s fit checker before you order.
1. MOOG K500176: Front Lower Ball Joint for Ram 4500 and 5500 Chassis Cab

- Front lower position
- Listed for 2011-2023 Ram 4500 and 5500
- Also lists 2008-2010 Dodge Ram 4500 and 5500
- Single joint, OE-style replacement
The MOOG K500176 is a front lower ball joint. Its Amazon listing names the 2011-2023 Ram 4500 and Ram 5500, the 2008-2010 Dodge Ram 4500 and 5500, and the 2008-2009 Sterling Bullet 45 and 55. Other listings cross the same position to Mopar 68034497AA, which helps when you are matching an old part on the bench.
On a chassis cab the lower joint carries much of the front weight, so it is often the first one to loosen on a truck that hauls a dump body or a plow. The listing describes the part as a key suspension pivot built to handle road stress and restore steady steering. It does not state whether a grease fitting is included, so look at the product photos and question section before you plan on greasing it.
This is a single joint, so a full lower job on both sides needs two. It is not meant for the Ram 2500 or 3500 pickup, which use different lower joints. Pressing it in takes a heavy-duty press with adapters sized for HD trucks. Enter your year and drivetrain into Amazon’s fit checker and read any listing notes before you buy, then plan for an alignment once the new joints are in.
2. MOOG K500138: Front Upper Ball Joint for Ram 4500 and 5500

- Front upper position
- Listed for 2011-2023 Ram 4500 and 5500
- Also lists 2008-2010 Dodge Ram 5500
- Single joint, standard (non-adjustable) design
The MOOG K500138 is the upper half of the pair above. Its listing names the 2011-2023 Ram 4500 and 5500, the 2008-2010 Dodge Ram 5500 and the 2008-2009 Sterling Bullet trucks. Aftermarket listings for this position cross to Mopar 68034496AA, so you can compare it against the number on an original joint.
The upper joint sees less static weight than the lower, but it still takes hits every time the front axle drops into a pothole or the plow frame bounces. When it wears, you may notice a knock over bumps, steering that wanders on the highway or uneven wear on the inside or outside edge of the front tires. The listing describes the part as built for controlled pivoting and steady steering response.
This is a standard joint, not an adjustable one, so it suits trucks that aligned correctly before the joint wore out. If your alignment shop has already said caster or camber cannot be set with stock parts, look at the adjustable MOOG K100140 further down instead. Buy one per side, confirm your year and drivetrain in Amazon’s fit checker and book an alignment after the job.

3. Metrix Premium 68034497AA: Front Lower Ball Joint Kit, 2 Pieces

- Two front lower joints in one box
- Listed for 2011-2024 Ram 4500 and 5500
- Includes nut, retaining ring and dust boot
- 3-year / 36,000-mile limited warranty as listed
The Metrix Premium Chassis Parts kit puts two front lower ball joints in one box. Its listing names the 2011-2024 Ram 4500 and 5500 and the 2008-2010 Dodge Ram 4500 and 5500, and it gives the joint number as 68034497AA, the same Mopar reference other lower listings use. That makes it a direct alternative to buying two single joints.
Each joint comes pre-greased and arrives with a nut, a retaining ring and a dust boot, which covers the small parts you would otherwise reuse or source separately. The listing describes steel construction and says the parts are IATF 16949 and ISO 9001 certified. Metrix also states a 3-year or 36,000-mile limited warranty from the date of installation, so keep the paperwork with the truck’s service records.
Doing both lower joints together keeps the front end even, since both sides have covered the same miles and the same loads. The kit does not include upper joints, so pair it with a matching upper if those are loose too. It is not a fit for the 2500 or 3500 pickup. Check your truck in Amazon’s fit checker before ordering and have the front end aligned after installation.
View Metrix Lower Ball Joint Kit on Amazon
4. A-Premium Front Upper Ball Joint: Pack of 2 with Grease Fitting

- Two front upper joints, left and right
- Listed for 2011-2023 Ram 4500 and 5500
- Grease fitting included, pre-greased
- 1-year warranty as listed
The A-Premium front upper joint comes as a pack of two, one for the driver side and one for the passenger side. Its listing names the 2008-2010 Dodge Ram 4500 and 5500, the 2011-2023 Ram 4500 and 5500 and the Sterling Bullet 45 and 55. It cross-references K500138, MS25519, TC5891 and Mopar 68034496AA, so it covers the same position as the MOOG upper above.
The listing states a steel ball stud, a pre-greased joint and an included grease fitting. That fitting matters on a work truck in West Michigan, because it lets you push fresh grease through before plow season and flush out water that collects over the summer. A-Premium lists a 1-year warranty on the part.
Because both uppers arrive together, this pack suits owners who want to refresh both sides at once and keep them matched. It does not include lower joints, and it is a standard upper rather than an adjustable one, so trucks with alignment trouble may need a different part. The listing also mentions loose steering, clunks and uneven tire wear as signs of a worn joint, which are worth confirming with an inspection first. Enter your year and drivetrain into Amazon’s fit checker before buying and plan for an alignment afterward.
View A-Premium Upper Ball Joint Pair on Amazon

5. A-Premium Front Lower Ball Joints: Pack of 2, Driver and Passenger

- Two front lower joints, left and right
- Listed for 2011-2021 Ram 4500 and 5500
- Pre-greased, no grease fitting listed
- 1-year warranty as listed
A-Premium also sells the lower position as a pack of two. The listing names the 2008-2010 Dodge Ram 4500 and 5500, the 2011-2021 Ram 4500 and 5500 and the 2008-2010 Sterling Bullet trucks. It cross-references Mopar 68034497AA and 68456973AA along with K500176 and MS25520, so it matches the lower joints covered above.
Note the year range. This listing stops at 2021, while the MOOG and Metrix lowers list later trucks, so owners of newer chassis cabs should check the fit carefully or pick one of those instead. The listing states a steel ball stud and a pre-greased joint, and it says there is no grease fitting. That makes it a sealed-style part, which saves the greasing step but gives you no way to flush out salt water later.
A-Premium lists a 1-year warranty. As with any lower joint on this truck, plan on a heavy-duty press and adapters sized for HD axles, and inspect the boots and knuckle bores while everything is apart. The pack does not include uppers. Confirm your exact year and drivetrain in Amazon’s fit checker before you order and book an alignment once the joints are installed.
View A-Premium Lower Ball Joint Pair on Amazon
6. MOOG K100140: Adjustable Front Upper Ball Joint for Caster and Camber

- Front upper position, adjustable
- Listed for 2011-2020 Ram 4500 and 5500
- Also lists 2008-2010 Dodge Ram 4500 and 5500
- Sold as a caster/camber alignment part
The MOOG K100140 is an adjustable front upper ball joint. Its listing names the 2011-2020 Ram 4500 and 5500, the 2008-2010 Dodge Ram 4500 and 5500 and the 2008 Sterling Bullet 45 and 55. MOOG files it as an alignment caster and camber part rather than a plain replacement joint, which tells you what it is for.
On a heavy truck, front angles can drift out of range after years of loads, a leveling kit or a bent component. When an alignment shop cannot bring caster or camber back to specification with standard joints, an adjustable upper gives them the range to do it. The listing says the kit helps solve excessive tire wear and steering issues and suits vehicles that have no factory adjustment for those angles.
This part only makes sense when an alignment check has shown the need. For a normal worn upper, the standard MOOG K500138 is the simpler choice. Setting an adjustable joint correctly takes an alignment machine, so it is usually installed by a shop or followed immediately by an alignment. Note that this listing stops at 2020, so confirm your year and drivetrain in Amazon’s fit checker before you buy.
Ram 5500 Part Number Cheat Sheet
This table sorts the best ball joints for Ram 5500 work by position and OE reference. It is built from listing data, not a promise of fit for every truck.
| Position | OE reference | Listings to check | Pack |
|---|---|---|---|
| Front upper | 68034496AA | MOOG K500138 | Single |
| Front upper | 68034496AA | A-Premium upper pair | Two |
| Front upper, adjustable | Alignment part | MOOG K100140 | Single |
| Front lower | 68034497AA | MOOG K500176 | Single |
| Front lower | 68034497AA | Metrix lower kit, A-Premium lower pair | Two |
If you also own a 2500 or 3500 pickup, do not assume its parts carry over. Our roundup of ball joints for trucks by model covers the pickups, and our general guide to choosing ball joints explains the basics of sealed and serviceable designs.

Plow Season, Salt and Heavy Upfits
West Michigan is hard on work trucks. A 5500 that pushes snow all winter carries a heavy plow frame over the front axle, then drives salted roads and freeze-thaw potholes between jobs. Once a boot tears, salt water gets into the socket and the joint loosens quickly from there.
If your joints have grease fittings, pump fresh grease through them before plow season and again in spring. Look at the boots each time, since a split boot means the joint is on borrowed time even if it still feels tight on the jack.

Loose joints are not the only cause of a wandering or bouncing front end. Worn shocks let the axle hop over bumps and can make good joints feel sloppy, so check the dampers at the same visit. Our guide to shocks and struts for daily drivers explains what worn dampers look like.
Pressing Them In Yourself or Handing It Off
Chassis cab joints are large and pressed in tight, and years of rust make them harder to remove. You need a heavy-duty press with adapters sized for HD trucks, which our guide to the ball joint press for Ram trucks covers. Support the truck on rated stands, wear eye protection and torque every nut to the factory specification.

Even the best ball joints for Ram 5500 trucks need an alignment afterward, since a heavy truck chews through front tires fast. If you would rather not wrestle a press on a work truck, our suspension repair shop in Grand Rapids can check the whole front end and replace the joints. Hendrick, who owns the shop and leads the work, holds ASE and State of Michigan certification in steering and suspension.
More Buying Guides
Frequently Asked Questions
Do Ram 3500 ball joints fit a Ram 5500?
Generally not. The 4500 and 5500 chassis cab use their own upper and lower numbers, such as Mopar 68034496AA and 68034497AA, while 3500 pickup kits list different parts. Check each listing’s vehicle list and the Amazon fit checker before ordering.
When do I need the adjustable MOOG K100140?
Only when an alignment shop cannot bring caster or camber into specification with standard parts. For a normal worn joint, a regular upper such as the MOOG K500138 is the usual replacement.
Is an alignment required after replacing Ram 5500 ball joints?
Yes, plan on one. New joints can change the front angles slightly, and on a heavy truck even a small error wears tires quickly and can make the steering pull.
Work truck wandering in its lane or clunking every time the plow drops? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a front end inspection through our contact page.
If the truck is on the job all day, park it at 456 Carrier St NE in Grand Rapids after your shift and leave it with our after-hours drop-off.
