As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
The Excursion is a full-size SUV built on Ford’s Super Duty truck chassis, and its front ball joints carry a lot of weight, often with a camper or boat hitched behind. Shopping for the best ball joints Ford Excursion owners can rely on starts with one question: is your truck 2WD or 4WD?
Below we cover that split, how sets and single joints compare, and six listings that name the 2000-2005 Excursion. If you are still deciding whether the joints are really worn, our guide to bad ball joint symptoms lists the signs to check first.
Quick answer
Which ball joints fit a Ford Excursion?
Match the joints to your drive type. A 4WD Excursion takes upper and lower joints shared with the 4WD F-250 and F-350 Super Duty, such as the Detroit Axle or TRQ four-piece sets. A 2WD truck uses a different pair, such as MOOG K80027 and K80028. Confirm year, engine and drive in Amazon’s fit checker.
Our Quick Picks
Three listings that cover the main jobs: a full 4WD set, a full 2WD set and a greasable single upper joint. All six picks are reviewed below.

Detroit Axle 4WD 4pc Kit
All four front joints for a 4×4 Excursion in one box.

BOXI 2WD 4pc Kit
Both uppers and both lowers for a 2WD Excursion.

MOOG K80028
A serviceable MOOG upper with a metal-to-metal bearing.
2WD or 4WD: Two Different Excursion Front Ends
Ford sold the Excursion from 2000 to 2005 with a 5.4L V8, a 6.8L V10, the 7.3L Power Stroke diesel through 2003 and the 6.0L diesel after that. The engine rarely changes the ball joint. The drive type does, because the 2WD and 4WD trucks use completely different front suspensions.
- 4WD: a solid front axle with an upper and a lower joint on each side, pressed into the steering knuckle. These are the same joints the 4WD F-250 and F-350 Super Duty use, so listings name both trucks together.
- 2WD: a separate set of upper and lower joints that crosses to MOOG K80027 and K80028. A 4WD kit won’t fit here, and a 2WD part won’t fit a 4×4.
- Axle version: some 4WD trucks left the plant with a Dana 50 front axle and others with a Dana 60. The listings below name the 4WD Excursion without splitting the two, but check the axle tag before you order.
Full Sets, Single Joints and Grease Fittings
On a 4WD Excursion, the upper and lower joints come out together because the knuckle has to come off to reach either one. The labor is nearly the same for one joint or all four, which is why four-piece sets are popular.
Single joints suit owners who only need one side or want a particular brand for each position, such as a MOOG upper with a TRW lower.
A grease fitting lets you flush water out of the joint, which helps in salt country, while a sealed joint needs no attention. Only count on a fitting when the listing says the joint has one.
Before you buy any joint, our overview of ball joints for everyday cars explains bearings, boots and hardware in more depth.
Best Ball Joints Ford Excursion Owners Can Order: The Picks
Every pick here names the 2000-2005 Excursion in its Amazon listing, and we say which drive type and position each one covers. Enter your year, engine and drive in the fit checker before you buy, since a 2WD part and a 4WD part are never interchangeable.
1. Detroit Axle 4WD Front Ball Joint Kit: 2 Upper and 2 Lower for Excursion and Super Duty

- 4WD models only, per the listing
- Names 2000-2005 Excursion 4WD
- 2 upper and 2 lower joints
- 10-year warranty stated on the listing
The Detroit Axle 4WD kit is a four-piece set with two front upper and two front lower ball joints. Its Amazon listing names the 2000-2005 Ford Excursion with four-wheel drive, along with the 1999-2016 F-250 and F-350 Super Duty 4WD and the 1999-2004 F-450 and F-550 Super Duty 4WD. The listing is clear that it suits 4WD models only, so a 2WD Excursion needs a different part.
Buying all four joints together makes sense on a 4WD truck, because the steering knuckle has to come off to reach either joint. Once the knuckle is on the bench, pressing in a fresh upper and lower on both sides adds little extra work. Detroit Axle states a 10-year warranty on the listing, and the kit is sold as a direct replacement for the factory joints.
This set suits an owner with a high-mileage 4×4 who wants to refresh the whole front end in one job and keep the parts from one supplier. It does not include tie rods, a press or a camber sleeve, so plan those separately. The listing does not split Dana 50 and Dana 60 axles, so confirm your year, engine and drive in Amazon’s fit checker before ordering.
View Detroit Axle 4WD 4pc Kit on Amazon
2. TRQ Front Upper and Lower Ball Joint Set: 4-Piece Kit for 00-05 Excursion 4WD

- Names 00-05 Excursion 4WD in the title
- 2 lower and 2 upper joints
- Long list of Ford reference numbers
- Limited lifetime warranty per the listing
TRQ’s set includes two front lower and two front upper ball joints. The title names the 2000-2005 Excursion 4WD, the 1999-2022 F-250 and F-350 Super Duty 4WD, and the 1994-1999 Dodge Ram 2500 4WD with a Dana 60 axle. The listing prints a long run of Ford and Mopar reference numbers, which helps if you want to compare it with the part that came out of your truck.
TRQ describes the joints as pre-assembled direct replacements that need no modification, and it backs the set with a limited lifetime warranty against defects in materials and workmanship, excluding normal wear. The company also points buyers to its library of do-it-yourself videos, which can help if you have never pressed a joint before.
This kit suits a 4WD Excursion owner who wants a full set and plans to do the work at home with a borrowed or rented press. The listing does not say whether the joints are greasable, so check the photos and the box before you count on a fitting. Like any 4WD set, it will not fit a 2WD Excursion, and you should confirm year, engine and drive with Amazon’s fit checker before you buy.
View TRQ Upper and Lower Set on Amazon

3. TRW JBJ1173: Front Lower Ball Joint for 2000-2005 Excursion and F-250 Super Duty

- Front lower joint, sold singly
- Compatibility lists Excursion 2000-2005
- 500K-cycle endurance testing per TRW
- Rubber dust cover
TRW JBJ1173 is a single front lower ball joint. Its compatibility list names the Ford Excursion from 2000 to 2005, the F-250 and F-350 Super Duty from 1999 to 2022, the 1992-1997 F-350 and the 1994-1999 Dodge Ram 2500 and 3500. The listing does not state the drive type in its title, so Amazon’s fit checker is the place to confirm it for your truck.
TRW, part of ZF, says every part passes four levels of testing and technical review before approval, including endurance testing of 500,000 cycles. The listing also describes a low-friction design meant to restore the steering and suspension to their original feel, and dust covers made from high-quality rubber to keep water and grit away from the ball.
This joint suits an owner who has found one worn lower joint and wants to replace it with a well-known brand instead of buying a full kit. Because the lower joint carries most of the Excursion’s weight, it is often the first to wear. If the other lower joint shows play as well, order two. Confirm year, engine and drive in the fit checker, and have the alignment checked once the job is finished.
4. MOOG K80027: Front Lower Suspension Ball Joint for Excursion and F-250 Super Duty

- Front lower joint, sold singly
- Fits 2000-2005 Excursion per the listing
- Also lists 1999-2022 F-250/F-350 SD
- Long OE cross-reference list
MOOG K80027 is a single front lower ball joint. The listing’s compatibility line names the 2000-2005 Ford Excursion, the 1999-2022 F-250 and F-350 Super Duty, and older F-250 and F-350 trucks from 1987 on. Two-wheel-drive kits on Amazon, such as the BOXI set below, list K80027 as their lower joint, which points to the 2WD front end, but the fit checker should have the final word.
MOOG is a DRiV brand, and the listing describes the joint as built for controlled pivoting between suspension parts, everyday road stress and restored steering stability. The title also prints a long list of cross-references, including Ford numbers and TRW, Dorman and Mevotech equivalents, which helps if you want to match the old part on the bench.
This joint suits a 2WD Excursion owner who wants a familiar brand for one lower position, or who plans to pair it with the MOOG K80028 upper. The listing does not state whether this part has a grease fitting, so check the photos before you count on one. Enter your year, engine and drive in Amazon’s fit checker before you buy, since a 4WD truck needs a different joint.

5. MOOG K80028: Front Upper Ball Joint with Gusher Bearing and Greaseable Socket

- Front upper joint, sold singly
- Fits 2000-2005 Excursion per the listing
- Problem Solver gusher bearing
- Greaseable socket and pre-installed boot
MOOG K80028 is a single front upper ball joint, and its listing names the 2000-2005 Ford Excursion and the 1999-2022 F-250 and F-350 Super Duty. It is the upper partner to the K80027 lower, and the same pair appears as the cross-reference in two-wheel-drive Excursion kits. As always, the fit checker should confirm it for your exact truck.
This is a MOOG Problem Solver part. The listing describes a metal-to-metal gusher bearing that lets grease flow across the bearing surface, a greaseable socket so new lubricant can flush out debris, ball studs heat processed to match or exceed OE requirements, a pre-installed boot and a Belleville preload washer that keeps the bearing tight as it wears.
Those features make it a sensible pick for an Excursion that sees salted roads and regular oil changes, where a few pumps of grease each visit push water out of the joint. If nobody will ever grease it, a sealed joint does the job with less fuss. Check the Amazon Confirmed Fit bar with your year, engine, drive and trim before you buy, and read any qualifier notes it shows.
6. BOXI 4pcs K80027 K80028 Front Ball Joint Kit: Upper and Lower for 2WD Excursion

- 2WD only, per the listing
- Names Excursion 5.4L, 6.8L, 6.0L and 7.3L
- Crosses to MOOG K80027 and K80028
- 3-year warranty stated on the listing
The BOXI kit includes four front ball joints, an upper and a lower for each side, and the title states that it fits two-wheel-drive models only. The listing breaks fitment down by engine: the Excursion with the 5.4L or 6.8L from 2000 to 2005, the 6.0L diesel from 2003 to 2005 and the 7.3L Power Stroke from 2000 to 2003. It also lists 2WD F-250 and F-350 Super Duty trucks across several years.
BOXI gives MOOG K80027 and K80028 as the replacement part numbers, which makes it easy to compare with the single joints above. The placement line lists front left, right, upper and lower, and the listing states a three-year warranty. It does not describe the bearing type or say whether the joints carry grease fittings, so check the photos.
This set suits a 2WD Excursion owner who wants to replace all four joints at once from one box, whether the truck runs a gas V8, the V10 or one of the diesels. It will not fit a 4×4, and the listing asks buyers to confirm fitment with the year, make and model selector. Enter your full truck details in Amazon’s fit checker before you order.
View BOXI 2WD 4pc Kit on Amazon
Matching Each Listing to Your Truck
Narrow the field by drive type first, then by set or single joint.
| Listing | Drive type | What’s in the box | Good fit for |
|---|---|---|---|
| Detroit Axle 4pc kit | 4WD only | 2 upper, 2 lower | Doing all four joints in one job |
| TRQ upper and lower set | 4WD | 2 upper, 2 lower | A full set with a limited lifetime warranty listed |
| TRW JBJ1173 | Confirm in fit checker | 1 lower joint | Replacing one lower side |
| MOOG K80027 | Confirm in fit checker | 1 lower joint | 2WD trucks, single lower |
| MOOG K80028 | Confirm in fit checker | 1 upper joint | Owners who want a greasable upper |
| BOXI 2WD kit | 2WD only | 2 upper, 2 lower | A full 2WD set, gas or diesel |
The Excursion’s front brakes are also Super Duty parts, so if the wheels are off anyway, it is a good time to look at the rotors. Our guide to rotors for the Ford Excursion covers that side.

Salt, Potholes and Towing Weight Around Grand Rapids
An Excursion weighs far more than a typical SUV, and every pothole hit goes straight into the lower joints. West Michigan’s freeze-thaw springs make that worse, so after a rough season it pays to check the front end. Our list of pothole damage signs covers what to look for.
Road brine is the slower problem. Once a boot cracks, salty water reaches the ball and the joint wears from the inside, and rusted knuckle bores make removal hard.
Worn shocks let a heavy front end bounce and hammer the joints, so check them at the same time. Our roundup of shocks and struts for daily drivers explains what a tired damper feels like.

Doing the Job Safely, and When to Hand It Over
Ball joints hold the wheel to the truck, so this is a steering and safety repair. Support the Excursion on rated stands, wear eye protection when you press joints out, and torque every nut to the factory figure. On 4WD trucks the upper joint usually sits in an adjustment sleeve that sets camber, so note its position before you pull it.
Pressed-in joints need a C-frame press with the right adapters, and our guide to a ball joint press kit covers the tool. The Car Care Council recommends having steering and suspension systems checked at least once a year, usually along with a wheel alignment.

Even the best ball joints Ford Excursion owners can buy shift the wheel angles slightly, so book an alignment once they are in. If the old joints are rusted into the knuckle or you would rather keep the truck off stands, we handle suspension repair in Grand Rapids on foreign and domestic vehicles.
More Buying Guides
Frequently Asked Questions
Are Ford Excursion ball joints the same as F-250 Super Duty ball joints?
For the same drive type, generally yes. The Excursion shares its front suspension with the 1999-2004 F-250 and F-350 Super Duty, and most listings name both. A 2WD Excursion still needs 2WD joints, and a 4WD truck needs 4WD joints.
Do the 7.3 Power Stroke and gas Excursions use different ball joints?
Usually not. The ball joints follow the drive type rather than the engine, so a 7.3 diesel 4×4 and a V10 4×4 take the same joints. Enter the engine in the fit checker anyway, since some listings carry engine notes.
Should I replace all four ball joints on a 4WD Excursion?
On a high-mileage truck it often makes sense. The knuckle comes off to reach either joint, so the labor is close to the same, and the joints on both sides have covered the same miles.
Do I need an alignment after new ball joints?
Yes. New joints and a moved camber sleeve change the wheel angles, and a heavy SUV wears tires quickly when the alignment is off.
Is your Excursion wandering on the highway or clunking over the tracks? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a front-end inspection through our contact page.
If the workday gets in the way, park the Excursion at 456 Carrier St NE using our after-hours drop-off and leave a note saying whether it is 2WD or 4WD and when the noise shows up.
