As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A home oil change needs very little special gear, and the pan that catches the old oil is the piece people tend to overthink. The best cheap oil drain pan is simply a sturdy plastic basin that holds more than your engine’s sump, stays put on the floor and pours cleanly into a jug afterwards. Spending more buys lids, screens and sealed transport, not a cleaner drain.
Below we explain what a basic pan has to get right and how to size one, then review five low-cost open pans. If you want a sealed container you can carry to the recycling point without pouring, our full guide to oil drain pans and sealed containers covers the larger and lidded options.
Quick answer
Which budget oil drain pan should I buy?
For most cars, a plain open pan of about 7 to 8 quarts with a splash lip and pour spout does the job. The NEIKO 20762A and Performance Tool W4070 suit typical four- and six-cylinder engines. Trucks with bigger sumps need something like the Dorman 15-quart pan, and mowers or motorcycles fit a small low-profile tray.
Our Quick Picks
Three quick picks for three common jobs: a round all-rounder for most cars, a wide shallow pan for lower cars and a 15-quart basin for trucks. All five pans are reviewed below.

NEIKO 20762A Drain Pan
Round 8-liter basin with a curled lip that holds oil in on the slide out.

Performance Tool W4070
Wide, shallow basin that slides under cars with modest clearance.

Dorman 95-1371 15 Quart
Large basin with room for big engine sumps and transmission fluid.
What a Basic Pan Has to Get Right
An inexpensive drain pan has one job, and it does not need many parts to do it. Oil leaves the drain plug in a thick arc that moves as the flow slows, so the basin has to be wide enough to catch the stream at full speed and at the final drips. A rolled or curved lip around the rim keeps oil inside when you slide the pan back out from under the car.
- Capacity with margin: the pan should hold at least a quart or two more than your engine takes, so it never sits brim full.
- Pour spout: a molded corner or spout lets you tip oil into an empty jug through a funnel without it running down the side.
- Chemical-resistant plastic: polyethylene and polypropylene pans shrug off oil, coolant and solvents and never rust.
- Height: a shallow pan slides under a car that sits low, while a deeper one holds more in a smaller footprint.
What a basic pan lacks is a lid. Every pan reviewed here is open, so the oil has to go into a sealed container before it leaves your garage. That extra step is the main trade-off against pricier closed containers.
Sizing a Pan to Your Engine
Check the oil capacity in your owner’s manual before you order, and include the filter. Many small cars and crossovers take around 4 to 5 quarts, a V6 often takes 5 to 6, and full-size trucks with V8s or diesels can take 7 quarts or a lot more. A 7-quart pan is comfortable for the first group and tight for the last.
Clearance matters too. A car on its tires leaves only a few inches under the oil pan, so measure the gap or plan to lift the car on ramps or stands before you buy a deep basin. Our guide to drive-on car ramps for home oil changes shows how much extra room a pair of ramps adds.
Lawn mowers, snowblowers and motorcycles hold far less oil, often under 3 quarts. A long, narrow tray that tucks under a small engine’s drain plug works better there than a round car pan.
Best Cheap Oil Drain Pan: Five Basic Pans Reviewed
All five pans below are plain plastic basins at the low end of the market, and every detail comes from the Amazon listing. Check the listed capacity against your engine’s oil volume and confirm the dimensions fit under your car before you order.
1. NEIKO 20762A Oil Drain Pan: 2-Gallon Plastic Basin with Anti-Splash Lip and Spout

- Holds up to 2 gallons (8 L)
- Curled anti-splash rim
- Side handles and attached spout
- Recyclable polythene plastic
The NEIKO 20762A is a plain round drain pan made from recyclable polythene plastic, and it is the kind of basic tool many people keep on a garage shelf for years. The listing gives the capacity as up to two gallons, or eight liters, which is roughly eight quarts. That leaves a comfortable margin for the four to six quarts most passenger car engines hold.
According to the listing, the pan is about 5 inches deep and 12.55 inches across, with a curled anti-splash lip around the rim to stop oil from slopping out when you pull it from under the car. Grip handles sit on both sides, and an attached spout makes it easier to pour the used oil into a large opening such as a funnel or recycling jug. A handle also lets you hang the pan on a wall hook.
For a sedan, hatchback or small SUV, this is a sensible all-round pick that handles oil, coolant and other fluids, as the listing notes. The 5-inch depth may be too tall for a lowered car sitting on its tires, so check the gap first. It is an open pan with no lid, so the oil needs to go into a sealed container before you drive it to a collection point.
View NEIKO 20762A Drain Pan on Amazon
2. Performance Tool W4070: 7-Quart Plastic Oil Drain Pan with Pour Spout and Molded Handles

- Holds up to 7 quarts (6.6 L)
- 15 x 14.5 x 3.5 in footprint
- Pour spout and molded handles
- Chemical- and solvent-resistant plastic
Performance Tool’s W4070 is a wide, shallow pan that trades a little capacity for an easier fit under the car. The Amazon listing rates it at 7 quarts, or 6.6 liters, which covers most four-cylinder and many six-cylinder engines with some room to spare. Its broad shape gives the oil stream a big target as the flow angle changes while it drains.
The listing puts the pan at 15 inches by 14.5 inches and only 3.5 inches tall, and it describes the design as compact enough for storage and access under low vehicles. It is molded from chemical- and solvent-resistant plastic that will not rust, according to the listing. Molded handles help you carry it, and a pour spout lets you empty it into a jug or funnel with less mess.
This pan makes sense for a car that has only a few inches between the oil pan and the floor, where a deep round basin would not slide in. The listing also names coolant, flushes and transmission fluid as suitable jobs. A 7-quart limit is too tight for a truck or V8 that takes close to that much oil, so check the capacity in your owner’s manual first, and plan on a separate sealed jug for transport.
View Performance Tool W4070 on Amazon

3. Funnel King 32950 Oil Drain Pan: 6.5-Quart Polypropylene Basin, Made in USA

- Holds up to 6.5 quarts (about 1.6 gal)
- 13.5 in long, 4.5 in tall
- Spout edge for pouring
- Polypropylene, made in the USA
The Funnel King 32950 comes from WirthCo Engineering’s line of fluid handling accessories, and the listing says it is built in the United States. It is a simple open basin molded from lightweight polypropylene, a plastic chosen to stand up to motor oil, coolant and common shop chemicals. The listed capacity is up to 6.5 quarts, or about 1.6 gallons.
According to the listing, the pan measures 13.5 inches in overall length, with an 11.5-inch top inside diameter and a height of 4.5 inches. Those dimensions let it slide under many cars as well as mowers, snowblowers and other small equipment. The open basin has a spout edge that helps you pour the collected oil into a recycling jug or disposal container without dribbling it across the bench.
This is a good match for a household with one small car and a few pieces of outdoor power equipment, since the same pan covers both jobs. The 6.5-quart limit leaves only a small margin on engines that take five or six quarts, and it is too small for most trucks. The listing does not mention handles, so be steady when you carry it full, and pour into a sealed container before the oil leaves the garage.
View Funnel King 32950 on Amazon
4. Dorman 95-1371: 15-Quart Plastic Drain Pan with Splash Guard and Handles

- 15-quart plastic drain pan
- Splash guard around the basin
- Carry handles
- Oil and transmission fluid use
Dorman is a well-known aftermarket parts brand, and the 95-1371 is one of its universal plastic drain pans. The listing describes it as a 15-quart pan, which is roughly twice the size of the round basins most people buy for a car. That extra room is the point: it can take the whole sump of a large engine without being filled to the rim.
The listing says the pan includes a splash guard and handles, and it lists changing engine oil and transmission fluid as the main uses. Dorman also notes that the pan suits a broad range of industrial and commercial jobs, and that other sizes are offered if you want something smaller. Every Dorman part is backed by the company’s technical support team, according to the listing.
For a pickup, a full-size SUV or a diesel with a large oil capacity, this pan removes the guesswork about whether a smaller basin will overflow. It is also handy if you drain transmission fluid from a pan without a drain plug, where fluid can come out fast from one corner. The trade-off is size: a big basin takes more shelf space and is heavier to carry when full, and like the others it has no lid, so transfer the oil to a sealed jug.
View Dorman 95-1371 15 Quart on Amazon

5. Performance Tool W4073: 2.8-Quart Low-Profile Drain Pan for Motorcycles and Small Engines

- Holds up to 2.8 quarts (2.64 L)
- Tapered narrow end
- Splash guard lip
- 2.68 in tall low profile
The Performance Tool W4073 is not a car pan, and the listing says so plainly. It is a long, low-profile tray rated at 2.8 quarts, or 2.64 liters, aimed at motorcycles up to 1000 cc and lawn equipment. If your household changes oil in a mower, a generator or a bike as well as a car, a small dedicated tray like this saves using a big basin for a small job.
According to the listing, one end tapers to a narrow tip designed to sit against the engine just under the drain plug of most small engines, which cuts down on splashing. A curved shape with a splash guard lip helps keep oil in the tray when you move it. The pan is made of heavy-duty, chemical-resistant plastic and measures 15.9 inches by 8.5 inches, at only 2.68 inches tall.
This tray suits riders and anyone with a garage full of outdoor power equipment, where drain plugs sit in tight spots close to the ground. Its 2.8-quart limit rules it out for almost every car engine, so treat it as a second pan rather than your only one. As with the other basic pans here, there is no lid, so pour the oil into a sealed container for the trip to a recycling drop-off.
View Performance Tool W4073 on Amazon
The Five Pans Side by Side
Use the table to shortlist a pan by capacity and shape, then compare it with your engine’s oil volume and the space under the car.
| Pan | Listed capacity | Shape | Good fit |
|---|---|---|---|
| NEIKO 20762A | 2 gallons (8 L) | Round, 5 in deep, curled lip | Most cars and small SUVs |
| Performance Tool W4070 | 7 quarts | Wide and 3.5 in tall | Cars with modest ground clearance |
| Funnel King 32950 | 6.5 quarts | Open round basin, 4.5 in tall | Four-cylinder cars and garden equipment |
| Dorman 95-1371 | 15 quarts | Large basin with splash guard | Trucks, big V8s, transmission fluid |
| Performance Tool W4073 | 2.8 quarts | Long, tapered, 2.68 in tall | Mowers and motorcycles up to 1000 cc |
For a typical sedan or crossover, the best cheap oil drain pan is one of the 7- to 8-quart basins, because they leave room to spare without taking over the shelf. Owners who also change the oil in a truck can skip the middle sizes and buy the 15-quart pan once.

After the Drain: Storage, Recycling and Grand Rapids Winters
Pour the used oil into a clean, sealable jug as soon as it cools, and keep it free of coolant, fuel or solvent. Earth911’s guide to recycling motor oil and filters notes that most stores selling motor oil accept used oil for recycling, and unmixed oil is what collection points want. Let the old filter drain into the pan for a while before you bag it.
Even the best cheap oil drain pan is easier to pour from with a wide funnel and a second person holding the jug. Wipe the spout afterwards and store the pan upside down, or hang it if it has a hanging handle, so dust does not settle in the oily film.

West Michigan winters make a driveway oil change slower. Cold oil drains sluggishly, so a short drive to bring the engine near operating temperature helps it run out fully, while giving it a few minutes to cool enough to handle safely. If you are switching grades for the season, our guide to the best motor oil for cold weather starts explains what the W rating means on a frozen morning.
When to Leave the Oil Change to a Shop
A cheap pan handles a routine drain, but some jobs need more than a basin and a wrench. A stripped drain plug, an oil filter that will not budge or fresh oil spots on the driveway between changes all point to problems worth having looked at on a lift. Milky or metallic-looking oil in the pan is another sign to stop and get the engine checked.

If the filter sticks, our roundup of the best oil filter wrench options can help with the next change. Prefer not to crawl under the car at all? Our oil change service in Creston can handle the drain and refill, and we look over the plug, filter and gaskets for leaks while the car is up.
More Buying Guides
Frequently Asked Questions
What size oil drain pan do I need?
Pick a pan that holds at least a quart or two more than your engine’s oil capacity with the filter, which the owner’s manual lists. A 7- or 8-quart pan covers most cars. Trucks with large V8s or diesels need a pan of 12 quarts or more.
Is a cheap plastic drain pan good enough?
For home oil changes, yes. Polyethylene and polypropylene resist oil and coolant, do not rust and are easy to wipe clean. What you give up is a sealed lid, so you need a separate jug to carry the oil to a collection point.
Where can I take used oil after draining it?
Many auto parts stores and service stations that sell motor oil accept used oil, and some communities run drop-off sites. Keep it in a sealed container and do not mix in coolant, fuel or other fluids, because mixed oil may be refused.
Can I use the same pan for oil and coolant?
It is wiser to keep a separate pan for coolant. Coolant is toxic to pets and wildlife, and traces left in a shared pan can contaminate the next batch of oil you take for recycling. Label each pan so they do not get swapped.
Found a leak, a rounded drain plug or oil that looks wrong in the pan? Phone our shop on 616-279-3832 between 8am and 5pm, Monday through Friday, or request a time through our contact page.
Tied up at work all day? Leave the car in our after-hours drop-off at 456 Carrier St NE in Grand Rapids and we will take it from there.
