As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Pop the hood on a recent Camry, RAV4 or Highlander and you may go looking for a round metal can that is not there. Many of these engines hide a paper element inside a housing with a screw-off plastic cap. For the 2.5L four-cylinder and the 3.5L V6, the best oil filter for Toyota cars and SUVs is the cartridge that matches your engine, built to the factory spec and fitted with a new O-ring.
Below we explain how that housing works, how to sort your model, and then review six elements from Toyota and the big aftermarket names. If your car still takes a spin-on can, our roundup of the top spin-on oil filter brands is the better place to start.
Quick answer
What oil filter should a Toyota 2.5L or 3.5L owner buy?
Start with the genuine Toyota 04152-YZZA1 element, or an equivalent cartridge from Mobil 1, PurolatorBOSS, WIX, Bosch or K&N whose listing names your model. All six here suit many Camry, RAV4, Highlander, Avalon and Sienna engines, but fit varies by year, so confirm it before ordering.
Our Quick Picks
Three quick picks: the factory element, a kit with the drain pipe in the box, and a long-interval aftermarket cartridge. All six are reviewed below.

Toyota 04152-YZZA1
The genuine Toyota element that the aftermarket cartridges here are built to replace.

Mobil 1 M1C-251
A synthetic-blend cartridge that comes with the drain pipe many Toyota housings need.

PurolatorBOSS PBL25608
A reinforced synthetic cartridge whose listing names the main Toyota cars and SUVs.
How the Toyota Cartridge Housing Works
A cartridge, which Toyota calls a replaceable element, is only the pleated media and its end caps. The housing stays bolted to the engine, and the cap unscrews to give you access. You throw away the element and the old O-ring, and the cap goes back on with fresh parts.
Many of these housings also have a small drain in the cap. A plastic drain pipe pushes into it so the oil trapped in the housing runs into your pan instead of down the side of the engine. Some filter boxes include that pipe, and losing it is one of the most common small annoyances of the job.
Less metal also means less waste. The EPA notes that used oil filters should be drained and recycled, usually at the same place that takes your used oil, so bag the old element with the drained oil when you drop it off.
Sorting Your Toyota by Engine Before You Order
Toyota has used the same model names across very different engines, so the badge on the trunk is not enough. A Camry may have the 2.5L four or the 3.5L V6, and older RAV4s offered both as well. The six picks in this guide cover cartridge housings on many 2.5L and 3.5L cars and SUVs, but each listing has its own year range.
- Check the old element: genuine elements carry the Toyota number, and aftermarket boxes print a cross-reference.
- Use the fit checker: enter year, model and engine on Amazon before you buy, every time.
- Corolla and Prius: these generally use a smaller element, so the picks here are not for them.
- Trucks: the Tundra and Sequoia V8s take a different cartridge, even when a listing also names a Tacoma.
The oil matters as much as the element. Most of these engines call for a thin grade, and our guide to 0W-20 oil for Toyota engines explains what to look for on the bottle.
Best Oil Filter for Toyota: Six Cartridges in Detail
Each fitment note below comes from the Amazon listing or the maker. No single element covers every Toyota, so confirm year, model and engine with Amazon’s fit checker before you order.
1. Toyota Genuine 04152-YZZA1: Replaceable Oil Filter Element, Two-Pack

- Genuine Toyota replaceable element
- Part number 04152-YZZA1
- Two elements per order
- Reference part for cross-references
The Toyota 04152-YZZA1 is the genuine replaceable element, the paper cartridge that sits inside the screw-off housing on many Toyota and Lexus engines. Aftermarket boxes often print this number, or the older 04152-31090, as the part they replace, so it is the reference point for every other filter in this list. This listing ships two elements, which covers two oil changes and saves hunting for the part again in six months.
The Amazon feature text is brief and only says the element effectively removes contaminants, so there is no fit list on the page itself. That makes the fit checker important here. Enter your year, model and engine, or read the number off the element you pull out, before you order. Check whether the box includes a cap O-ring, and buy one separately if it does not, because the old seal should never go back on.
This element suits an owner who wants the factory part and does not mind confirming fit through Toyota’s numbering rather than a model list. It is not meant for Corolla or Prius models that use a smaller element, or for the V8 trucks. If your car is still under warranty, keep the receipt with your service records.
View Toyota 04152-YZZA1 on Amazon
2. Mobil 1 M1C-251: Extended Performance Cartridge Oil Filter with Drain Pipe

- Cartridge style element
- Synthetic fiber blend media
- Drain pipe and gasket included
- Replaces Toyota 04152-31090
The Mobil 1 M1C-251 is a cartridge-style element from the Extended Performance line, and its listing states that it replaces Toyota 04152-31090. That earlier Toyota number is often cross-referenced with the 04152-YZZA1 family, which is why this filter turns up for many 2.5L and 3.5L Camry, RAV4 and Highlander engines. As with any element here, confirm fit for your year and engine before you buy.
Mobil describes the media as an advanced synthetic fiber blend that removes more contaminants than conventional filters, and says the element withstands up to nine times normal system operating pressure. The detail most DIY owners will notice is in the box: one drain pipe and one gasket. The drain pipe pushes into the cap drain so the housing empties into your pan, which keeps the job much cleaner.
This filter suits someone doing a first cartridge change who does not own a drain tool yet, or anyone running synthetic oil who wants a well-known brand. Follow the interval in your Toyota owner’s manual rather than any number on a box, and keep the drain pipe for next time. It is not a fit for Corolla, Prius or V8 truck housings.
View Mobil 1 M1C-251 on Amazon

3. PurolatorBOSS PBL25608: Cartridge Oil Filter for Camry, RAV4 and Highlander

- Rated for up to 20,000 miles
- SmartFUSION polymer mesh backing
- Premium gasket for a tight seal
- No metal components
The PurolatorBOSS PBL25608 is a cartridge element whose listing names the Toyota Camry, RAV4, Highlander, Tacoma, Sienna and Avalon, plus the Lexus RX350 and ES350. That model list makes it one of the easier aftermarket picks to match to a 2.5L or 3.5L car or SUV. Year ranges still matter, so run your vehicle through the fit checker before you order.
Purolator rates the BOSS line for up to 20,000 miles of engine protection and builds it with what it calls SmartFUSION technology, a reinforced polymer mesh backing that adds dirt holding capacity. The listing also mentions a premium gasket for a leak-tight seal and no metal components, so the spent element is light and simple to bag up with your drained oil. Purolator states strong dirt removal for the media as well.
This cartridge suits an owner who runs full synthetic oil and wants headroom if the maintenance schedule allows a longer interval. The mileage rating is a filter capacity figure, not permission to skip changes, so your owner’s manual still sets the schedule. Owners of a Corolla, Prius, Tundra or Sequoia need a different element.
View PurolatorBOSS PBL25608 on Amazon
4. WIX XP 57047XP: Synthetic-Oil Cartridge Filter for Toyota and Lexus

- Built for synthetic motor oil
- Synthetic-blend media, no wire backing
- Up to 20,000-mile intervals
- Fits various Toyota and Lexus (05-15)
The WIX XP 57047XP is a cartridge filter from the WIX XP line, which WIX builds for synthetic motor oil. The listing describes it as compatible with various Toyota and Lexus models from 2005 to 2015, a window that covers many 3.5L V6 and earlier 2.5L engines. Newer cars may still match, but you need the part finder to confirm it.
WIX uses a synthetic-blended media with natural fibers that does away with wire backing, and quotes 99 percent efficiency at 23 microns based on testing of a related XP filter. The listing also says the XP line outperforms original-equipment standards and supports change intervals of up to 20,000 miles. WIX aims it at severe conditions such as towing, stop-and-go traffic and long highway runs.
This element suits an owner of a 2005 to 2015 Toyota or Lexus who runs synthetic oil and drives in heavy traffic or cold weather, the kind of use that ages oil faster. The listing does not mention a drain pipe or O-ring, so check the box and have a fresh cap seal ready. Your owner’s manual, not the box rating, should set the interval.

5. Bosch Workshop 72236WS: Cartridge Oil Filter with Seals for Toyota and Lexus

- Holds up to 13 grams of particles
- Exact original-equipment fit
- O-rings and seals where OE specifies
- Long Toyota and Lexus fit list
The Bosch Workshop 72236WS is a cartridge element with one of the most detailed fit lists in this guide. It names the 2005-22 Avalon, 2007-23 Camry, 2008-22 Highlander, 2006-18 RAV4, 2007-20 Sienna and 2009-15 Venza, along with the Lexus ES350 and RX350 and some Tacoma years. Bosch notes that trim level and engine can affect fitment, so the fit checker remains the final word.
Bosch says its Workshop filters capture and hold up to 13 grams of harmful particles, keeping them from circulating through the engine. The cartridges are engineered to fit exactly like the original-equipment element. O-rings, seals or washers come in the box where the vehicle maker specifies them, which helps avoid the most common leak after a home change. That also saves a separate trip to the parts counter for a cap seal.
This element suits an owner who wants a complete, ready-to-fit part with a clear model list, especially on a Camry, Highlander or Sienna. Bosch advises replacing it at the maker’s specified intervals, so follow your Toyota maintenance guide. Note that the RAV4 coverage listed stops at 2018, and Corolla, Prius and V8 truck owners need a different part.
6. K&N HP-7020: High-Efficiency Cartridge Oil Filter for Toyota and Lexus

- Synthetic-blend pleated media
- Works with any motor oil type
- Lab tested for capacity and burst strength
- Select 2005-2026 Toyota and Lexus
The K&N HP-7020 is a cartridge element that its listing describes as compatible with select 2005-2026 Lexus, Toyota, Lotus and Scion models, with the full list in the product description. That long year range reaches into current 2.5L and 3.5L cars and SUVs, but the word select is important, so run your exact year and engine through the fit checker before buying.
K&N builds the HP-7020 with pleated synthetic-blend media designed to remove most harmful contaminants, and says it is engineered for high, consistent oil flow. The listing states that the filter works with synthetic, conventional and blended motor oils, and that it is laboratory tested for capacity and burst strength. K&N sells it as part of a line it rates for up to 20,000 miles of protection.
This element suits an owner who sometimes switches between conventional and synthetic oil, or who shares one filter part across a Toyota and a Lexus in the same household after checking both. The listing does not mention a drain pipe or cap O-ring, so plan for those separately. As with the others, your owner’s manual sets the change interval.
Side by Side: The Six Toyota Elements
Use this as a starting point rather than a fit list. The models shown are the ones each listing names, and every one still needs a fit check for your year and engine.
| Element | Listing names | Extras noted | Suits |
|---|---|---|---|
| Toyota 04152-YZZA1 | Part number only (two-pack) | None listed | Owners who want the factory part |
| Mobil 1 M1C-251 | Replaces Toyota 04152-31090 | Drain pipe and gasket | First-time DIY changes |
| PurolatorBOSS PBL25608 | Camry, RAV4, Highlander, Sienna, Avalon | Premium gasket | Long service intervals |
| WIX XP 57047XP | Various Toyota and Lexus (05-15) | Check listing | Synthetic oil, older models |
| Bosch 72236WS | Camry, Highlander, RAV4, Avalon, Sienna, Venza | O-rings where OE specifies | A complete kit in one box |
| K&N HP-7020 | Select 2005-2026 Toyota and Lexus | Check listing | Any oil type |
Where two elements list your car, either one will do as long as the cross-reference matches. Choosing the best oil filter for Toyota owners then comes down to how long you run your oil and whether you want the O-ring and drain pipe in the same box.

The Cap, the O-Ring and the Drain Tool
On a Toyota cartridge housing, almost every leak after a home oil change traces back to the cap seal. Pull the old O-ring off the cap, check that it did not stay stuck in the housing, and fit the new one lightly oiled and fully seated in its groove. A rolled or doubled O-ring will weep oil within a few miles.
Drain the housing through the cap before you unscrew it, then use a cap wrench that fits your housing rather than slip-joint pliers. Tighten the cap to the torque in your service information, since the plastic can crack if you lean on it. If you prefer to pull oil from the top, an oil change fluid extractor pairs well with a housing that sits up high.

Michigan Winters, Maintenance Schedules and Shop Help
Toyota publishes the oil and filter interval for each model in the owner’s manual and maintenance guide, which you can pull up by year on the Toyota Owners manuals page. Short trips and frozen mornings in West Michigan often count as harder use, so read the special operating conditions section too. Our article on how often to change oil covers when it makes sense to shorten the gap.
Thin oil flows faster on a cold start, and our list of the best motor oil for cold weather goes into the details. Even the best oil filter for Toyota engines only holds so much dirt, so a winter of short commutes is a good reason not to stretch the change.

Rather skip the crawl under the car? Our oil change service in Creston handles Toyota cartridge housings, caps and O-rings. Bring it in sooner if you see oil around the housing, a low reading on the dipstick or an oil warning on the dash.
More Buying Guides
Frequently Asked Questions
Is a genuine Toyota oil filter better than an aftermarket one?
Not automatically. The genuine element is the reference part, and the aftermarket cartridges here are built to replace it. What matters most is that the cross-reference matches your engine and that you fit a new cap O-ring every time.
Which oil filter fits a Toyota Camry or Highlander?
Many Camry and Highlander models with the 2.5L four or the 3.5L V6 use a cartridge in the 04152-YZZA1 family, and several listings here name both. Fit still changes by year, so confirm your exact year and engine with Amazon’s fit checker.
Do these filters fit a Corolla or Prius?
Generally not. Most Corolla and Prius models use a smaller element, so check the number on your old filter and buy the one listed for your car rather than one of the larger cartridges above.
Do I need a special tool to drain the filter housing?
Many Toyota housings have a drain in the cap that takes a small plastic drain pipe. Some filters include one, such as the Mobil 1 M1C-251, and a cap wrench sized for your housing makes removal easier.
Spotted oil around the filter cap, or just short on time this week? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up your Toyota oil change on our contact page.
If weekday hours don’t line up with your schedule, ask us about after-hours drop-off when you call, and bring your Toyota to 456 Carrier St NE, Grand Rapids.
