456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Sizing the Cap Right: The Best Oil Filter Wrench for Honda Owners

best oil filter wrench for honda: captivating image of dynamic sparks against a black background

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Honda made the oil change easy by using one filter size across a long run of its gasoline engines. That also makes the best oil filter wrench for Honda owners an easy target: a cap that matches the filter end exactly, so the flutes take the load instead of your knuckles.

This guide sticks to cap wrenches sized for the Honda filter, from the factory tool to stamped and forged cups. For adjustable jaws, pliers and strap tools that fit many makes, see our roundup of oil filter wrench styles.

Quick answer

What size cap wrench fits a Honda oil filter?

Most Honda gasoline engines use a filter like the 15400-PLM-A02 with a 65 mm, 14-flute end. The Honda 07AAA-PLCA100 cap is made for it. A Lisle 61540 or CTA A255 at 65/67 mm with 14 flutes also fits, and works with a 3/8-inch ratchet you already own.

Our Quick Picks

Three quick picks: the factory Honda cap, a heavy-duty 65/67 mm cup and a forged 1/2-inch drive option. All six are reviewed below.

Honda 07AAA-PLCA100 product photo
Factory tool

Honda 07AAA-PLCA100

65 mm · 14 flutes · 3/8 in or 17 mm

Honda's own cap, sized for the 15400-PLM-A02 type filter.

SuitsOwners who want the factory part number
View on Amazon →
Lisle 61540 product photo
Heavy duty

Lisle 61540

65/67 mm · 14 flutes · 3/8 in

A reinforced stamped cup that resists spreading on a tight filter.

SuitsOwners who change oil often
View on Amazon →
Tongze 64-65 mm Wrench product photo
Forged option

Tongze 64-65 mm Wrench

64-65 mm · 14 flutes · 1/2 in or 22 mm

A solid chrome vanadium cap for a filter that will not let go.

SuitsOvertightened filters
View on Amazon →

How the Honda Filter End Shapes Your Choice

A cap wrench is a steel cup with flats on the inside that match the flats pressed into the closed end of a spin-on filter. When the size and flute count line up, the cup locks onto the can and turns it like a socket on a nut. When they do not, it slips, spreads or crushes the end.

Three details decide the fit on a Honda:

  • Diameter: the genuine Honda filter end measures 65 mm across. Cups sold as 65/67 mm cover it, and two-step cups marked 64-65 mm add a Toyota-size step inside.
  • Flute count: 14 flats around the edge. A 15-flute cup of the same diameter will not seat.
  • Drive: most cups take a 3/8-inch ratchet. Some forged versions take a 1/2-inch drive or an open-end wrench on a hex top, which helps when a ratchet will not fit.

Cars like the Civic, Accord, CR-V and Element all appear on listings for this size. Each product below states its own size, and some name specific models.

Check Your Filter Before You Order

The filter on your Honda right now may not be a Honda filter. Many aftermarket filters for these engines use a different end shape, a smooth can or a molded nut, so a 65 mm cup may not grip them. Look at the part number on the can, or measure across the flats and count them.

Then look at the space around it. On some engines a splash shield, a subframe brace or a nearby line limits how far a handle can swing. Your owner’s manual on the Honda Owners site shows the filter’s location and the oil capacity for your model.

Best Oil Filter Wrench for Honda: Six Caps Reviewed

Every tool here is a cap wrench in the Honda filter size. Sizes, drive types and materials come from each Amazon listing, so compare them with the filter you actually run.

1. Honda Genuine 07AAA-PLCA100: 65 mm 14-Flute Cap with 3/8-Inch and 17 mm Drive

Honda 07AAA-PLCA100 product photo
Key features
  • Genuine Honda service tool, part 07AAA-PLCA100
  • 65 mm cap with 14 flutes
  • Takes a 3/8-inch ratchet or 17 mm hex wrench
  • Corrosion-resistant steel construction

This is the cap wrench Honda lists under its own part number, 07AAA-PLCA100. The listing describes a 65 mm cap with 14 flutes, made to fit the Honda and Acura filter sold as 15400-PLM-A02. That filter turns up on a long list of Honda gasoline engines, so a single cap covers most of the cars and crossovers a Honda family is likely to own.

The head accepts two kinds of drive. You can push a standard 3/8-inch ratchet into the square, or put a 17 mm wrench on the hex when there is no room to fit a ratchet head between the filter and a brace. The listing describes the steel as corrosion resistant, which matters for a tool that lives in a damp garage and gets coated in used oil several times a year.

Because it is the factory size, there is little guesswork about fit on a genuine Honda filter. It is not a universal tool, though. If you run an aftermarket filter with a different end, a smooth can or a molded nut, this cap may not grip it at all. Check what is on the car before ordering, and keep in mind that it only turns filters with that exact end shape.

View Honda 07AAA-PLCA100 on Amazon

2. Lisle 61540 Heavy-Duty End Cap Filter Wrench: 65/67 mm, 14 Flutes, Welded Cup

Lisle 61540 product photo
Key features
  • Fits 65/67 mm filters with 14 flutes
  • Extra welds and a steel top disc for strength
  • One-piece design for standard ratchets
  • Universal size, no vehicle-specific fitment

The Lisle 61540 is a heavy-duty end cap wrench for spin-on filters that measure 65 to 67 mm across and carry 14 flutes. That is the size of the common Honda filter end, so it slips over the can the same way the factory tool does. Lisle is clear that this is a universal wrench with no vehicle fitment list, and asks you to measure the filter end and count the flats before you buy.

Stamped cups can flex when a filter is badly overtightened, and the rim spreads instead of turning the can. Lisle addresses this with what the listing calls an improved design: added welds and a steel disc across the top of the cup. The result is a one-piece tool that works with ordinary ratchets and extensions, without adapters or moving parts to wear out.

This makes the 61540 a good everyday choice for someone who changes oil on a Civic or CR-V a few times a year and wants a tool that will last. It still depends on the flutes being intact. On a rusted or crushed end, or on an aftermarket filter with a different cap, it can slip, and a plier-type tool is the better backup.

View Lisle 61540 on Amazon

close-up of bright sparks flying against a dark background

3. CTA Tools A255 Cap-Type Oil Filter Wrench: 65/67 mm x 14 Flute, Deep Reach

CTA Tools A255 product photo
Key features
  • 65/67 mm cap with 14 flutes
  • Deep-reach, precision-stamped cup
  • Uses a 3/8-inch drive
  • Listed for AC, Fram, Honda, Purolator and Toyota

CTA Tools sells the A255 as a professional-grade cap-type wrench in the 65/67 mm, 14-flute size. The listing describes it as precision stamped with a deep-reach cup and a black finish, and it takes a 3/8-inch drive. That depth helps the cup sit fully over the end of the can, so the flutes engage along their whole height instead of just the edge.

The listing names applications for AC, Fram, Honda, Purolator and Toyota filters. That is useful if you are not loyal to one filter brand and buy whatever the parts store has for your Accord or Element. As always with cap wrenches, the brand on the box matters less than the end on the can, so look at the actual filter to confirm it has the 14-flute pattern.

As a stamped tool, the A255 is light and compact, which makes it easy to fit on a short ratchet in a cramped engine bay. It will not suit filters with a different diameter or flute count, and like any thin cup it can deform if forced on a filter that has been seized for years. For routine changes on a filter that went on by hand, it is a tidy and practical tool.

View CTA Tools A255 on Amazon

4. Performance Tool W54066 Oil Filter Cap Wrench: 65/67 mm, 14 Flutes, 3/8-Inch Drive

Performance Tool W54066 product photo
Key features
  • Sized for 65/67 mm filters with 14 flutes
  • Steel construction
  • Fits standard 3/8-inch drive tools
  • Works across several filter brands

The Performance Tool W54066 is a straightforward steel cap wrench in the 65/67 mm, 14-flute size. It fits on any 3/8-inch drive ratchet or extension, and the listing says it is designed to fit multiple brands of oil filters that share that end shape. For a Honda owner, that means it lines up with the genuine filter end and with aftermarket filters that copy it.

There is not much to set up. You push the cup onto the end of the filter, seat it fully over the flats, and turn the ratchet counterclockwise. The steel body is the whole tool, with no welded top or forged hex, so it stays compact and easy to store in a toolbox drawer or a glovebox kit for a second car.

Its simplicity is the point. It suits a home mechanic who wants the right size at hand without paying for a heavy-duty build, and it makes a good spare if a household has more than one Honda. The trade-off is the same as for other stamped cups: on a seized or rusty filter it can flex or slip, and it does nothing for filter ends that are a different size.

View Performance Tool W54066 on Amazon

long exposure shot

5. Tongze 64-65 mm Oil Filter Wrench: 14 Flutes, Chrome Vanadium, 1/2-Inch or 22 mm Drive

Tongze 64-65 mm Wrench product photo
Key features
  • Fits 64-65 mm, 14-flute filter ends
  • Chrome vanadium steel, polished finish
  • Turns with a 1/2-inch ratchet or 22 mm wrench
  • Listed for 15400-PLM-A02 and Wix 57356

Tongze makes this cap from chrome vanadium steel rather than stamped sheet, which gives it a thicker, stiffer body than most cups. The listing states a 64-65 mm, 14-flute fit and names the 15400-PLM-A02 Honda filter and the Wix 57356 by part number. It mentions Civic, Accord, CR-V and some Acura models among the cars it suits.

Instead of a 3/8-inch square, the Tongze takes a 1/2-inch drive ratchet or a 22 mm open-end wrench. That larger drive is the reason to choose it. When a filter has been spun on far too tight, a 1/2-inch breaker bar gives more leverage than a small ratchet, and the solid steel body is less likely to spread under that load. The listing adds that its multiple contact points are meant to avoid damaging filter housings.

The two-size fit is helpful in a driveway with a Honda and a Toyota, since many Toyota cartridge housings use a 64 mm end. You will need a 1/2-inch ratchet or 22 mm wrench to use it, so check your toolbox first. It is heavier than a stamped cup and may be harder to fit where clearance is tight.

View Tongze 64-65 mm Wrench on Amazon

6. Havgufil 64-65 mm 14-Flute Oil Filter Wrench: Two-Step Cap for Honda and Acura

Havgufil 64-65 mm Wrench product photo
Key features
  • Two-step cap: 64 mm inner, 65 mm outer
  • Made for 14-flute filter ends
  • Listed as a replacement for 07AAA-PLCA100
  • Fitment list covers many Honda and Acura models

The Havgufil cap is a two-step design. According to the listing, the inner step measures 64 mm and the outer step 65 mm, both for 14-flute filters. It is sold as a replacement for the Honda 07AAA-PLCA100 tool, and the listing reminds buyers to check that part number before ordering, which is good advice for any cap wrench.

What sets this listing apart is its fitment list. It names a long run of Honda models, including the 1997-2015 CR-V, 1984-2015 Civic and Accord, 2003-2011 Element and 2003-2015 Pilot, along with Acura models such as the MDX, RDX and TSX. That gives an owner a quick way to see whether the size matches, though the filter on the car is still the final word, especially if it is not a genuine part.

The listing does not say which drive size the cap takes, so check the product photos for the square before you count on using your current ratchet. It is a sensible pick for a household that keeps a Honda and an Acura and wants one cap for both. It will not fit filters with a 15-flute or larger end, and it is not meant for very stubborn filters.

View Havgufil 64-65 mm Wrench on Amazon

Size, Drive and Build at a Glance

All six fit a 65 mm, 14-flute end; the drive and build are what set them apart.

ToolListed sizeDriveGood fit for
Honda 07AAA-PLCA10065 mm, 14 flutes3/8 in or 17 mm hexOwners who want the factory tool
Lisle 6154065/67 mm, 14 flutes3/8 inFrequent changes, welded heavy-duty cup
CTA A25565/67 mm, 14 flutes3/8 inDeep-reach stamped cup, several filter brands
Performance Tool W5406665/67 mm, 14 flutes3/8 inA simple spare for the garage drawer
Tongze 64-65 mm64-65 mm, 14 flutes1/2 in or 22 mm wrenchStubborn filters, Honda and Toyota sizes
Havgufil 64-65 mm64/65 mm two-step, 14 flutesNot stated in listingA household with Honda and Acura models
Honda filter cap wrenches compared by listed size, drive type and the owner each one suits.

Getting a Clean Honda Oil Change in West Michigan

Most Hondas from recent years use the Maintenance Minder, which shows remaining oil life as a percentage and tells you when service is due. Follow it, and the manual, rather than a fixed mileage. Our article on how often to change oil explains how short trips and cold starts change the picture.

captivating sparks flying sideways on a black background

Use the cap only to break the old filter loose. Wipe the mounting face, make sure the old gasket came off with the can, then oil the new gasket and spin the filter on by hand to the turn its box calls for. A filter that went on by hand comes off with the cap next time without a fight.

Grade matters as much as the filter. The fueleconomy.gov maintenance page notes that using the grade the manufacturer recommends helps mileage, and many current Hondas call for 0W-20. Our list of motor oils for cold weather covers what flows well on a January morning in Grand Rapids.

scenic view of RV and tent in a foggy forest meadow

Salt spray reaches the underside of every car here by midwinter. A rusty filter end can soften the flats, so clean it with a rag and brake cleaner before you fit the cup, and keep the cap square to the can as you pull.

When the Cap Slips or the Can Tears

Even the best oil filter wrench for Honda engines cannot fix a filter end that is already crushed. If the cup spins on the flats, a plier-type tool gripped low on the can is the next step. If the can tears open, the filter adapter turns or oil keeps seeping after the new filter is on, stop and get it looked at.

vivid sparkler explosion captured with precise detail on a dark backdrop

Our oil change service in Creston can remove a seized filter, check the threads and mounting face, and refill with the grade your manual lists.

Frequently Asked Questions

What size oil filter wrench does a Honda take?

For the common genuine filter, such as the 15400-PLM-A02, the cap is 65 mm with 14 flutes. Cups sold as 65/67 mm with 14 flutes fit it too. Aftermarket filters can differ, so check the end of the filter you use.

Will a Toyota 64 mm cap wrench fit my Honda?

A plain 64 mm cup is a little small for a 65 mm Honda end and may not seat. Two-step cups marked 64-65 mm are made to cover both sizes, which is handy if you work on both makes.

Is the genuine Honda filter wrench worth buying?

It is sized exactly for the Honda filter and takes a 3/8-inch ratchet or a 17 mm wrench. A quality 65/67 mm aftermarket cup does the same job on that filter. Choose by the drive you prefer and how often you change oil.

Should I tighten the new filter with the cap wrench?

No. Spin it on by hand until the gasket touches, then turn it the amount printed on the filter box. Using the wrench to tighten makes the next removal harder and can distort the gasket.

No time for a Honda oil change, or no wish to crawl around a cold floor? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request a Honda oil change through our contact page.

Bring the keys by whenever suits you, even outside business hours, since after-hours drop-off is available at 456 Carrier St NE, Grand Rapids, MI 49505.