456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Brembo GT or 2.0T? Sizing Up the Best Rotors for Kia Stinger Brakes

best rotors for kia stinger: city skyline during an evening commute on a bridge with a cloudy sunset sky

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

The Kia Stinger was sold with two quite different brake packages, so finding the best rotors for Kia Stinger models starts with working out which one sits behind your wheels. A 2.0T sedan from the early years runs a 320mm front disc, while the 3.3T GT cars wear red Brembo calipers clamping a 350mm front and 340mm rear rotor.

Below you’ll find how to tell the packages apart, which rotor styles make sense for a fast sedan that also commutes through winter, and six listings matched to a named Stinger axle. If you want the general basics on rotor types first, our overview of blank, drilled and slotted brake rotors covers them.

Quick answer

Which rotors fit my Kia Stinger?

Check the calipers first. Brembo-equipped GT, GT1 and GT2 cars take 350mm fronts such as Bosch QuietCast 53011429 and 340mm rears such as Brembo 09.D028.11. A 2018-2021 2.0T usually takes 320mm fronts like the AutoShack pair. Replace rotors in axle pairs, fit new pads and confirm the part on Amazon.

Our Quick Picks

Three listings that cover the most common Stinger jobs: a coated 350mm front for Brembo GT cars, a 320mm front pair for the early 2.0T and a 340mm rear for the GT.

Bosch QuietCast 53011429 product photo
GT front pick

Bosch QuietCast 53011429

Front rotor, 350mm, coated blank

A coated, factory-size front disc for Stingers with the Brembo package.

Suits2018-2022 GT, GT1 and GT2 owners
View on Amazon →
AutoShack 320mm Front Pair product photo
2.0T front pick

AutoShack 320mm Front Pair

Front pair, 320mm, vented blank

A straightforward pair of front discs for the four-cylinder Stinger.

Suits2018-2021 Stinger 2.0T owners, RWD or AWD
View on Amazon →
Brembo 09.D028.11 product photo
GT rear pick

Brembo 09.D028.11

Rear rotor, 340mm, UV coated

A Brembo replacement disc for the rear of a Brembo-braked Stinger.

SuitsGT, GT1 and GT2 owners doing the rear axle
View on Amazon →

Sorting Out Your Stinger’s Brake Package

The quickest test is a look through the front wheel spokes. A large red four-piston caliper with the Brembo name means the GT setup, and its rotors are noticeably bigger than those on a car with a plain black floating caliper. Model year and engine help too, but the hardware on the car is the final word.

Listings for the Brembo cars generally quote a 350mm (13.78 inch) front and a 340mm (13.4 inch) rear disc. Listings for the 2018 to 2021 2.0T cars quote a 320mm (12.6 inch) front and a smaller rear of about 12.4 inches. The 2022 and 2023 refresh brought a 2.5T engine to the GT-Line, and some sellers group it with the larger front rotor, so measure before you assume.

Many Stinger parts are shared with the Genesis G70, which rides on related hardware. That makes cross-checking part numbers easier, but it also means a title can list a G70 range that differs from your Kia. The OE number cast or printed on the old rotor hat is a useful tiebreaker when fit checkers disagree.

Blank, Coated or Drilled on a Fast Sedan

Stinger rotor listings tend to fall into three families, and each suits a different owner.

  • Blank OE-style: a smooth face with the factory vane design. It runs quietly, treats pads gently and matches how the car felt new.
  • Coated OE-style: the same blank face with a protective finish on the hat, edge and cooling vanes, which helps once winter brine arrives.
  • Drilled and slotted: holes and grooves in the friction face for a sportier look and pad-gas venting. They can be a little noisier and may wear pads faster on a commuter.

A GT driven hard on back roads benefits more from good pads and fresh fluid than from cross-drilling. Pairing the rotor with the right friction matters, and our roundup of brake pads for quiet, low-dust daily driving is a good place to start for a sedan that mostly commutes.

Best Rotors for Kia Stinger, Axle by Axle

Each listing below names the Stinger years and the axle it covers. Brake hardware changed with trim and engine, so let the Amazon fit checker settle the part number for your car before you order.

1. Bosch QuietCast 53011429: 350mm Coated Front Rotor for 2018-2022 Stinger

Bosch QuietCast 53011429 product photo
Key features
  • Front, 350mm, sold as one rotor
  • Aluminum/zinc anti-rust coating
  • Mill balanced, OEM-style vanes
  • Listing names 2018-22 Stinger, 2019-22 G70

Part 53011429 is the 350mm front rotor in Bosch’s QuietCast premium range, and its Amazon listing names the 2018 to 2022 Kia Stinger along with the 2019 to 2022 Genesis G70. That diameter matches the larger front brakes on Brembo-equipped cars. Each box holds a single disc, so plan on ordering two for the front axle.

Bosch says each QuietCast rotor is mill balanced at the factory so weight is spread evenly, which is meant to prevent the pedal pulsation that GT owners often complain about. The vane layout follows the original design for heat flow and quiet running, and an aluminum and zinc finish covers the hat, edge and vanes the pads never reach. A discard thickness engraved on the part tells you, or your technician, when it has reached the end of its life.

This is a smooth OE-style disc, so it keeps the factory feel rather than adding a slotted look. It suits a GT, GT1 or GT2 that commutes year round and sees some spirited driving. The listing warns that trim and engine can change fitment, so run your VIN through the fit checker, and skip it on a 2.0T car with the smaller front brakes.

View Bosch QuietCast 53011429 on Amazon

2. AutoShack Front Rotor Pair: 320mm Vented Discs for 2018-2021 Stinger 2.0T

AutoShack 320mm Front Pair product photo
Key features
  • Two front rotors in the box
  • Vented, 320mm (12.6 inch), 5 lug
  • Driver and passenger side
  • Listing names 2018-21 Stinger 2.0L AWD/RWD

AutoShack sells this as a set of two vented front rotors with a 320mm (12.6 inch) outer diameter and five wheel bolt holes. The listing names the 2018 to 2021 Kia Stinger with the 2.0L engine in both rear-drive and all-wheel-drive form, along with matching Genesis G70 four-cylinder years. That covers the early turbo-four cars that came without the big Brembo front calipers.

Because both the driver and passenger rotors come together, you get a matched axle set in one order, which is how rotors should be replaced anyway. The seller describes them as direct-fit replacements built for balanced, consistent everyday braking. There’s no drilling or slotting, so pads bed in evenly and the brakes should feel the way the car did when it was new.

This pair makes sense for a 2.0T sedan used mainly for commuting, where you want a plain, factory-style replacement rather than an upgrade. The listing doesn’t describe a protective coating, so expect the hats and edges to show surface rust sooner in a salt-belt winter. AutoShack itself asks buyers to confirm rotor size, brake setup and position before ordering, and these won’t suit a Brembo-equipped GT.

View AutoShack 320mm Front Pair on Amazon

free stock photo of amalfi coast

3. Brembo 09.D028.11: 340mm UV Coated Rear Rotor with Pillar Venting

Brembo 09.D028.11 product photo
Key features
  • Rear, 340mm, 22mm thick
  • UV coating against corrosion
  • Pillar Venting Technology (PVT)
  • Listing OE# 58411J5500 (Genesis/Kia)

Brembo lists 09.D028.11 against Genesis and Kia original part number 58411J5500, the 340mm rear rotor that other Stinger listings tie to the 3.3T cars. The Brembo catalogue page for 09.D028.11 confirms a rear ventilated disc that is 22mm thick when new, with a 20mm minimum thickness and one rotor per box.

The rotor uses Brembo’s Pillar Venting Technology, a pattern of pillars rather than straight vanes inside the disc, which the company says improves cooling and resistance to cracking. A high carbon content is there to damp vibration and noise, and a UV-cured coating protects the non-contact surfaces from corrosion. Since Brembo already supplies the factory calipers on GT cars, this is a natural match for owners who want to stay with that brand.

This disc is a good fit for a GT, GT1 or GT2 that needs a rear brake job and gets driven hard now and then. Order two, and plan on fresh rear pads too. The Amazon title doesn’t list vehicles, so match the OE number on your old rotor or a parts catalog entry before buying, and don’t use it on a 2.0T car with the smaller rear brakes.

View Brembo 09.D028.11 on Amazon

4. PowerStop JBR1791XPR: Drilled and Slotted Zinc Plated Front Rotor Pair

PowerStop JBR1791XPR product photo
Key features
  • Two front rotors in the box
  • Drilled and slotted friction faces
  • Silver zinc dichromate plating
  • Listing names 2018-22 Stinger, 2019-22 G70

PowerStop part JBR1791XPR is a pair of front drilled and slotted rotors from its Evolution line, and the listing names the 2018 to 2022 Kia Stinger and 2019 to 2022 Genesis G70. The bullets don’t state a diameter, so compare the fit checker result with the size of the rotor on your car, since Stingers of the same years came with two different front brake sizes.

On its drilled, slotted and zinc plated rotor page, PowerStop says the holes and rounded slots sweep away gas, debris and moisture to keep a clean contact patch. A silver zinc dichromate plating covers the rotor to resist rust, and the part is designed as a direct bolt-on with no modification. Both rotors for the axle arrive together.

These suit an owner who likes the look of cross-drilled discs behind open-spoke wheels and drives with some enthusiasm. On a quiet commuter they bring few practical gains, and drilled faces can wear pads somewhat faster and make more noise than a blank disc. Pair them with a pad that suits the rotor style, and avoid them if you mostly want the calm, factory brake feel.

View PowerStop JBR1791XPR on Amazon

aerial shot in a garage

5. R1 Concepts Carbon Blank Rotors: 13.4 Inch Rear Pair for Stinger 3.3L

R1 Concepts Carbon Rear Pair product photo
Key features
  • Two rear blank rotors
  • 13.4 inch diameter
  • G3000 iron, carbon grade
  • Listing names 2018-2023 Stinger 3.3L

R1 Concepts sells this set as two carbon blank rear rotors at 13.4 inches across. The listing names the 2018 to 2023 Kia Stinger with the 3.3L engine and a long list of Genesis G70 versions with Brembo brakes. That makes it a rear option for the twin-turbo V6 cars, including later GT1 and GT2 models.

The rotors are cast from G3000 grade iron with a carbon content aimed at strength and stability, and they are mill balanced to help stops stay smooth without vibration. R1 describes them as a direct fit built with factory specifications in mind, so no modification should be needed. Since both rear discs come in one box, you get a matched pair for the axle.

A plain blank face suits drivers who want the original feel and even pad wear without paying for a premium brand. It’s a sensible match for a GT that commutes, carries passengers and sees occasional fun on a back road. The listing does not mention a corrosion coating, so expect some rust on the hat in winter, and remember that the 2.0T rear uses a smaller rotor.

View R1 Concepts Carbon Rear Pair on Amazon

6. TRQ G-Coated Rear Rotor Set: Drilled and Slotted for 2018-2021 Stinger

TRQ G-Coated Rear Set product photo
Key features
  • Driver and passenger rear rotors
  • G-coated against corrosion
  • Drilled and slotted faces
  • Reference OE# 58411J5000

TRQ packs one driver-side and one passenger-side rear rotor in this set, both with a G coating and drilled and slotted faces. The listing names the 2018 to 2021 Kia Stinger and 2019 to 2023 Genesis G70, and its reference numbers include OE part 58411J5000. That number differs from the 58411J5500 rear used on Brembo cars, which points to the smaller rear brakes on the 2.0T.

The coating covers the rotor to slow rust on the hat and edges, which helps on a car that lives through slushy winters. TRQ describes the parts as direct-fit replacements that need no modification. The company also publishes do-it-yourself installation videos for its catalog, which can help if you plan to handle the rear job at home.

This set suits a 2.0T owner who wants a coated rear rotor with a sportier look than a plain disc. Drilled and slotted faces can be slightly louder and wear pads faster, so a blank rotor remains the quieter choice for pure commuting. Check the reference number on your old rotor or the fit checker first, because a V6 GT with Brembo rear calipers needs a different part.

View TRQ G-Coated Rear Set on Amazon

Matching Each Listing to Your Stinger

Use this table to line up your brake package with the rotor that the listing names for it.

Stinger setupListingAxle and sizeStyle
Brembo GT, 2018-2022Bosch QuietCast 53011429Front, 350mm, singleCoated blank
2.0T, 2018-2021AutoShack front pairFront, 320mm, pairVented blank
Brembo GT (OE 58411J5500)Brembo 09.D028.11Rear, 340mm, singleUV coated blank
Stinger 2018-2022PowerStop JBR1791XPRFront, pairDrilled, slotted, zinc plated
3.3T, 2018-2023R1 Concepts rear pairRear, 13.4 inch, pairCarbon blank
Stinger 2018-2021 (OE 58411J5000)TRQ rear setRear, pairCoated, drilled and slotted
The best rotors for Kia Stinger brake packages in this guide, by the axle and size each listing names

Some of these ship as one rotor and others as a pair, so read the quantity line before checking out. Whatever you buy, change both rotors on an axle together and fit new pads with them.

scenic coastal road at dusk with traffic and ocean waves

Salt, Rusty Hats and Pulsing Pedals in West Michigan

A rear-drive or all-wheel-drive Stinger that sees a Grand Rapids winter collects brine in every seam of the brake assembly. Scale grows fastest where the rotor hat meets the hub, and even a thin layer can tip a fresh rotor enough to cause runout. You won’t notice it on day one, but within a few thousand miles the pedal starts to throb.

Coated hats and vanes slow that corrosion down, which is why most of the picks here carry some kind of finish. The hub face still needs a wire brush or a hub cleaning disc down to bare metal every time a rotor comes off.

Big Brembo rotors are also heavy, and a car parked for a week of slush can grow orange bloom on the friction faces. A few firm, safe stops normally wipe it off. Pitting that stays after that means the surface is too far gone.

scenic coastal road with street lamps lining the edge

Installing Stinger Rotors and When to Bring It In

Even the best rotors for Kia Stinger cars have a limit. Each disc has a minimum thickness marked on it, and once wear or machining takes it under that number it has to be replaced. Cracks, deep scoring, a tall lip at the edge or blue heat spots are other signs a rotor is finished.

A shimmy through the steering wheel isn’t always the rotors. Our article on why a car shakes when braking walks through the other causes, such as worn suspension parts and wheel balance.

vibrant coastal road with turquoise sea

During the swap, clean the hub, torque the caliper bracket bolts and the lug nuts to Kia’s figures in a star pattern, and bed in the new pads as their maker describes. The Stinger also has an electronic parking brake on the rear axle, so rear jobs may need a scan tool or the service-mode procedure to retract it.

If the pedal sinks, the car pulls to one side or you would simply rather not handle Brembo hardware yourself, have a technician take a look. Our shop handles brake repair in Grand Rapids for foreign and domestic cars, performance sedans included.

Frequently Asked Questions

What are the best rotors for a Kia Stinger GT2?

A GT2 has the Brembo package, so look for 350mm front and 340mm rear rotors. A coated blank rotor such as Bosch QuietCast up front and Brembo 09.D028.11 at the rear keeps the factory feel, while R1 Concepts offers a blank rear pair.

Can I fit GT rotors to a 2.0T Stinger?

Not on their own. The larger discs need the matching Brembo calipers and brackets, so a 2.0T car without that hardware takes the smaller rotors its listing names.

Why do Stinger rotors seem to warp?

Usually the disc isn’t bent at all. Uneven pad deposits, rust on the hub face or lug nuts tightened unevenly cause runout that feels like warping, so clean mating surfaces and correct torque matter as much as the part.

Are Genesis G70 rotors the same as Stinger rotors?

Often they share part numbers, and several listings here name both cars. The year ranges and trims differ, though, so check your Stinger in the fit checker rather than relying on a G70 match.

Hearing a grind, or feeling a pulse every time you slow your Stinger down? Ring 456 AutoFix at 616-279-3832 between 8am and 5pm, Monday to Friday, or set up a brake inspection on our contact page.

Busy during the workday? Drop the sedan at 456 Carrier St NE after hours, and leave a quick note with the keys describing the noise or vibration.