As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
The best rotors for towing are the ones that soak up a long downhill stop with a trailer behind you and still feel the same on the next one. On a 3/4-ton or 1-ton pickup, that means a rotor built to the factory size and vane design, with a finish that holds up to salt and a friction face that suits your pads.
Below are six listings for Super Duty, GM heavy-duty and Ram 2500/3500 trucks. Rotors are vehicle-specific, so confirm your year, cab, drivetrain and axle in Amazon’s fit checker before you order.
Quick answer
Which rotors hold up when you tow with a heavy-duty truck?
Pick a rotor that matches your truck’s factory diameter, thickness and vane design, ideally fully coated for salted roads. Slotted kits like Power Stop’s Z36 suit frequent heavy towing, while OE-style lines such as ACDelco Gold, Raybestos Element3 and Centric GCX suit most tow rigs. Replace pads with the rotors and confirm fitment by year and axle.
Our Quick Picks
Three listings that cover the big three heavy-duty pickups: a Super Duty slotted kit, a GM HD front rotor and a coated Ram rear rotor.

Power Stop Z36 K6403-36
Rotors, Z36 pads and hardware in one box for frequent heavy towing.

ACDelco Gold 18A2804SD
A GM-backed aftermarket rotor built to the original vane layout.

Raybestos Element3 780733FZN
A coated OE-matched rear rotor for trucks that carry hitch weight.
What a Heavy Trailer Asks of Your Brake Rotors
A loaded trailer multiplies the heat each stop makes, and the rotor takes it first. The best rotors for towing are thick and well vented, so they store and shed that heat before the pads fade.
Heavy-duty pickups leave the factory with large, deep-vaned rotors for that reason. A thinner aftermarket part takes away heat capacity, so compare the listed diameter and thickness to your original rotor.
A trailer with its own brakes and a properly set controller should handle its share of each stop, and your truck maker sets the towing and combined weight limits. Ram, for example, keeps its ratings and towing terms in its Ram towing capacity guide.
Slotted, Coated or OE-Style: Picking a Tow-Rig Rotor
Three designs show up on truck listings.
- OE-style blank: a smooth face with the original vane layout. Quiet and kind to pads, it suits occasional towing.
- Slotted or drilled and slotted: grooves sweep gas, dust and water off the pad face. Common in truck and tow kits, though pads can wear a little faster.
- Fully coated: a zinc or similar finish on the hat, vanes and edge, so the areas the pads never touch resist rust.
Brand programs often bundle these ideas. Raybestos splits its range into R-Line, Element3 and Specialty, and its Raybestos brake program overview describes Element3 as pairing EHT hybrid friction with RPT coated-rotor technology.
Replace pads with the rotors. Truck-rated pads are compared in our guide to the best brake pads for trucks, and a pickup that mostly commutes may suit the best brake pads for daily driving. For rotor types on cars and SUVs, see our guide to choosing the best brake rotors.
Best Rotors for Towing: Six Heavy-Duty Listings by Truck
Each pick names the trucks and axle its Amazon listing states. Other years and drivetrains often take a different part number in the same line, so use the one the fit checker confirms.
1. Power Stop Z36 K6403-36: Front Truck and Tow Kit with Drilled and Slotted Rotors

- Two drilled and slotted front rotors
- Two Z36 carbon-fiber ceramic pad sets
- Silver zinc dichromate plating
- Listing names F-250 SD 2012-22, F-350 SD 2013-22
Power Stop’s Z36 line is the brand’s truck and tow program, and K6403-36 is the front kit the listing names for the Ford F-250 Super Duty from 2012 to 2022 and the F-350 Super Duty from 2013 to 2022. In the box are two drilled and slotted rotors, two Z36 carbon-fiber ceramic pad sets and installation hardware, so the whole front axle is covered in one order.
Power Stop says the drilled and slotted faces help the rotors shed heat and resist fade, and that a silver zinc dichromate plating protects them from rust and corrosion. The brand describes the Z36 compound as a step up in stopping power over stock replacement pads while staying quiet. The listing also states a 36 month or 36,000 mile limited warranty. For a Super Duty that pulls a car hauler, a gooseneck or a heavy camper most weekends, a matched kit takes the guesswork out of pairing pads with rotors.
The slotted surface can wear pads somewhat faster than a smooth OE-style rotor, and a truck that rarely tows may not need it. Super Duty brakes changed across these model years, and dual rear wheel, cab-chassis and 4×2 versus 4×4 trucks can differ, so confirm your exact truck in Amazon’s fit checker. The kit may arrive in more than one box.
View Power Stop Z36 K6403-36 on Amazon
2. ACDelco Gold 18A2804SD: Front Rotor for 2011-2020 Silverado and Sierra HD

- GM part 19362936, front axle
- OE vane configuration for cooling
- Damped iron to cut noise and shed heat
- Mill balanced, non-directional
ACDelco Gold 18A2804SD, GM number 19362936, is a front rotor for General Motors heavy-duty trucks. The listing names the Chevrolet Silverado 2500 HD and 3500 HD and the GMC Sierra 2500 HD and 3500 HD from 2011 to 2020, plus the 2017 to 2019 Suburban and the 2016 to 2019 Suburban 3500 HD. That covers a long run of the trucks people in this part of the state use to pull campers, boats and work trailers.
ACDelco says the rotor matches the OE vane configuration for cooling and reduced brake wear, and that damped iron metallurgy reduces noise and helps dissipate heat. It is mill balanced to reduce vibration and non-directional, so there is no separate left and right part to keep track of. Some Gold parts were formerly sold under the ACDelco Professional name, which can help when you are matching an older part number from a receipt.
This is an OE-style rotor, not a slotted upgrade, so it suits owners who want factory feel with a heavy trailer rather than a performance look. GM redesigned its heavy-duty pickups for 2020, so a 2020 truck especially needs a fit check, as do chassis cabs and dual rear wheel models. Buy two for the axle and fit new pads at the same time.
View ACDelco Gold 18A2804SD on Amazon

3. Raybestos Element3 780733FZN: Rear Coated Rotor for Ram 2500 and 3500

- Grey Fusion 4.0 coating
- RPT rust prevention technology
- Coated cooling vanes for airflow
- Listing names 2011-2023 Ram 2500 and 3500 rear
Raybestos Element3 780733FZN is a coated rear rotor for Ram heavy-duty trucks. The listing names the 2011 to 2023 Ram 2500 and Ram 3500, the 2009 and 2010 Dodge Ram 2500, 3500 and 4000, and the 2011 to 2015 Ram 4000, all on the rear axle. Element3 is the brand’s premium program, which pairs its coated rotors with EHT friction on the pad side of the range.
Raybestos says the Grey Fusion 4.0 coating gives corrosion resistance and makes for faster rotor jobs, and that its RPT rust prevention technology is meant to last. The cooling vanes are coated too, which the brand says keeps them clear of rust so air can move through and cool the rotor. The rotor is described as OE matched for precision and performance. On a truck carrying fifth wheel or gooseneck weight over the rear axle, and parked through a salty winter, those coated vanes and hat are where the value shows.
Rear brakes on some of these trucks also contain a parking brake drum inside the rotor hat, so inspect the shoes while the rotor is off. Dual rear wheel trucks and cab chassis models may need a different part, so run the fit checker first and order a pair for the axle.
View Raybestos Element3 780733FZN on Amazon
4. Power Stop AR85155EVC: Fully Coated Rear Rotor for 2013-2022 F-250 and F-350

- Fully coated finish against rust
- OE vane count and dimensions
- Single rotor, rear left or right
- Listing names F-250 and F-350 SD 2013-22
Power Stop AR85155EVC is a single fully coated rear rotor for the Ford F-250 Super Duty and F-350 Super Duty from 2013 to 2022, as the listing states. Where the Z36 kit above is a slotted upgrade for the front, this is a plain OE replacement for the back of the same generation of trucks, and it fits either the left or right side.
Power Stop says the rotor is engineered to original equipment specifications with the correct vane count and dimensions, so it bolts on without modifications. The fully coated finish is there to resist rust and corrosion, which matters on the rear of a Super Duty that spends winter on salted roads and summer with a trailer hitched. The brand describes it as designed for smooth, consistent braking and reduced vibration, and the listing states a 12 month or 12,000 mile limited warranty.
Rear rotors on these trucks work hardest when hitch weight or a heavy bed load sits over the axle, so they wear faster than on an empty pickup. The listing is for one rotor, so order two and fit fresh rear pads with them. Ford used different rear brakes on some dual rear wheel and chassis cab versions, so check fitment in Amazon’s fit checker before you buy.
View Power Stop AR85155EVC on Amazon

5. Centric GCX 320.65086F: Fully Coated Front Rotor for 1999-2004 Super Duty

- Zinc-aluminum rich coating
- Carbon enhanced metallurgy
- OE vane design and plate thickness
- Listing names F-250 and F-350 SD 1999-2004
Centric GCX 320.65086F is a fully coated front rotor for the first generation of Ford’s heavy-duty pickups. The listing names the F-250 Super Duty and F-350 Super Duty from 1999 to 2004 and the Excursion from 2000 to 2005. Plenty of these trucks are still pulling trailers as farm, contractor and camper rigs, and replacement parts for them are worth choosing carefully.
Centric says the GCX line uses a zinc-aluminum rich coating for corrosion resistance and a surface finish meant to give consistent braking from the first stop. It describes the metallurgy as carbon enhanced for heat transfer and structural strength, and the rotor keeps the OE vane design and plate thickness for heat capacity. On an older truck that tows, holding on to the original thickness and cooling layout is the main thing a replacement rotor has to get right.
Front brake layouts on these trucks differ between two-wheel and four-wheel drive and between single and dual rear wheel models, and some versions use a rotor and hub assembly instead of a separate rotor. Check the old part and your truck in the fit checker before ordering. While the front end is apart, look at the caliper slides and hub face, since rust there is common on trucks of this age.
View Centric GCX 320.65086F on Amazon
6. DuraGo BR90102801: Titanium Series Rear Rotor for 2011-2022 Silverado 3500

- Titanium Series coated hat and edge
- Multiple vane configurations for cooling
- Non-directional swirl finish
- Listing names select 2011-22 Silverado 3500, 120mm hat
DuraGo BR90102801 is a vented rear rotor from the brand’s Titanium Series. The listing names select 2011 to 2022 Chevrolet Silverado 3500 models and gives a 120mm hat height, which is one of the details worth checking against your old rotor. One-ton trucks like this often carry fifth wheel or gooseneck weight right over the rear axle, so the rear rotors do more work than on a lighter pickup.
DuraGo says every rotor is made with computerized machining for tight tolerances, and that its premium cores give cleaner castings for proper airflow. The Titanium Series coating protects the hat and edge, and the brand says multiple vane configurations push hot air out and pull cool air in. A non-directional swirl finish means the rotor does not need machining before installation, and DuraGo says it helps the pads bed in. The titanium gray finish also keeps the hat looking tidy behind open wheel designs.
The fitment note on this listing is narrow, so do not assume it fits every Silverado 3500 or the matching Sierra. Single and dual rear wheel trucks and chassis cabs can use different rotors. Run your truck through Amazon’s fit checker, order a pair and replace the rear pads at the same time.
View DuraGo BR90102801 on Amazon
Matching a Rotor to Your Truck and Trailer
Here is how the best rotors for towing line up with common towing habits.
| How you tow | Rotor type | Example listing | Watch for |
|---|---|---|---|
| Boat or camper a few weekends a year | OE-style, coated | ACDelco Gold 18A2804SD | Rust on the hat after storage |
| Weekly equipment or car hauler | Slotted kit with truck pads | Power Stop Z36 K6403-36 | Faster pad wear |
| Fifth wheel on a 1-ton | OE-design, fully coated rear | Raybestos Element3 780733FZN | Rear pads wearing quickly |
| Older Super Duty work truck | Coated OE-style front | Centric GCX 320.65086F | Seized slides and hub rust |
Most braking happens up front, but a fifth wheel or gooseneck puts weight over the rear axle, so rear rotors on those trucks work harder. Replace rotors in axle pairs, never one side alone, and change old brake fluid during the job if it is past the interval in your owner’s manual.

Salt, Long Grades and Trailer Season in West Michigan
Tow rigs here often sit through winter with salt on the brakes, then come out in spring to pull a boat or camper. Rust that builds between the hat and the hub face stops the rotor sitting flat, and you feel a pulse in the pedal.
A fully coated rotor keeps those surfaces cleaner, and our guide to the best coated brake rotors for rust goes deeper on finishes. Before the first trip of the season, make a few firm stops on an empty road to scrub rust off the friction faces.
Long hills and stop-and-go traffic pile heat into the rotors, so use a lower gear or tow/haul mode and brake early and gently. Check the trailer’s brakes and controller setting too.

Fitting Tow-Rig Rotors and When to Bring It In
Even the best rotors for towing wear out. The minimum thickness is stamped on the rotor, and below it the rotor has to be replaced. Grooves, a raised lip, blue heat spots or cracks are other reasons to swap it.
A pulsing pedal or a shaking wheel under braking is the classic sign of uneven rotor thickness or runout, and our article on why a car shakes when braking walks through the causes. A sticking brake caliper can cook a new rotor quickly on a towing trip, so fix any drag first.

Clean the hub face to bare metal, torque bracket bolts and lug nuts to spec, and bed in the pads and rotors per the maker before towing.
If the pedal feels soft, the truck pulls, or a vibration stays after new parts, have it inspected before the next tow. Our shop handles brake repair in Grand Rapids on foreign and domestic vehicles, heavy-duty pickups included.
More Buying Guides
Frequently Asked Questions
Are drilled and slotted rotors good for towing?
Slotted faces help clear gas and dust from the pads during hard, repeated stops, which is why truck and tow kits use them. A coated OE-style rotor of the correct size works well for occasional towing.
Should I replace pads when I replace rotors on a tow truck?
Yes. Old pads carry the wear pattern of the old rotors and won’t seat well on a fresh surface. Fit new truck-rated pads and bed them in per the maker.
Can bigger rotors let my truck tow more?
No. Towing and combined weight ratings come from the truck maker. Rotors help the brakes cope within those ratings, they don’t raise them.
Why do my truck’s brakes shake only when I’m towing?
Extra weight makes small problems easier to feel. Uneven rotor thickness, rust under the hat, a sticking caliper or a low trailer brake controller setting can all cause it.
Getting the truck ready for trailer season in Grand Rapids? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a brake inspection through our contact page.
Working the same hours we are? Use our after-hours drop-off and leave the truck with us at 456 Carrier St NE, Grand Rapids, MI 49505.
