456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

HEMI or Cummins? Picking the Best Serpentine Belt for Ram Trucks

best serpentine belt for ram: top view of assorted repair instruments and screws in box near hammer and scotch tape on dirty tile in soft da

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Ram pickup leans hard on its accessory belt. It turns the alternator, the A/C compressor, the power steering pump on many trucks and, on the Cummins diesels, a large cooling fan as well. The best serpentine belt for Ram trucks is not one part at all, because a 5.7 HEMI half-ton and a 6.7 Cummins heavy-duty use belts of different widths and lengths.

This guide sorts the choices by engine. It covers how the HEMI and Cummins drives differ, how to confirm fit, six listings that each name a Ram engine, and the pulley checks that keep a new belt quiet.

Quick answer

Which serpentine belt should a Ram owner buy?

Buy the belt listed for your exact engine: a Gates FleetRunner or Dayco belt for the 5.7 or 6.4 HEMI, a heavy-duty Gates or Mopar belt for the 6.7 Cummins, and an eight-rib heavy-duty belt for the older 5.9 Cummins. Check year, engine and alternator setup first, and spin the tensioner and idlers before fitting it.

Our Quick Picks

Three picks that cover the 5.7 HEMI half-ton, the 6.7 Cummins and the classic 5.9 Cummins. All six belts are reviewed below.

Gates FleetRunner Belt for Ram 1500 5.7L product photo
5.7 HEMI half-ton

Gates FleetRunner Belt for Ram 1500 5.7L

Ram 1500 | 5.7L V8 | 2013-2020

Gates' heavy-duty belt listed for the fourth-generation HEMI half-ton.

SuitsRam 1500 HEMI owners who tow or haul
View on Amazon →
Gates FleetRunner Belt for Ram 2500 6.7L product photo
6.7 Cummins

Gates FleetRunner Belt for Ram 2500 6.7L

Ram 2500 | 6.7L I6 | 2013-2018

Heavy-duty Gates belt listed for the 6.7 Cummins diesel.

SuitsDiesel owners who tow often
View on Amazon →
A-Premium 8PK2058HD Belt for 5.9 Cummins product photo
12V and 24V Cummins

A-Premium 8PK2058HD Belt for 5.9 Cummins

8 ribs | 81.04 in | 1994-2002

Heavy-duty belt for the 12-valve and 24-valve 5.9 Cummins with A/C.

SuitsSecond-generation diesel owners
View on Amazon →

Why the Engine Under the Hood Picks the Belt

Ram has sold the same badge with very different engines. The current Ram 2500, on Ram’s own model page, is offered with a 6.4L HEMI V8 or a High-Output 6.7L Cummins Turbo Diesel I6. Older trucks add the 4.7 V8, the 5.7 HEMI in several generations, and the 5.9 Cummins in 12-valve and 24-valve forms.

Each of those engines spins a different set of pulleys, so the belt changes with them. Gasoline HEMI drives use a narrower belt, while the diesels run a wider eight-rib belt that carries a heavier load. A heavy-duty belt suits a truck that tows, idles for long periods or works in heat, since the rubber and cord are built for that strain.

Model years matter inside one engine family too. A 2013 Ram 1500 with the 5.7 can take a different belt than a 2009 truck with the same engine, and newer half-tons with the eTorque mild-hybrid system use their own belt drive. That is why every pick below names a model, a year range and an engine.

Confirm the Fit Before You Click Buy

A few minutes with the truck saves a return trip. Work through these before ordering any belt in this guide:

  • Year, model and engine: enter all three in Amazon’s fit tool. “Ram 1500” alone covers several belt sizes.
  • Alternator setup: some Cummins trucks were built with a second alternator, which changes belt length.
  • Old belt label: the number printed on the belt you remove is the fastest cross-reference, even when it has worn faint.
  • VIN: for a Mopar part, give the seller your VIN when asked. Factory parts are matched by build data.

The Best Serpentine Belt for Ram Trucks, Engine by Engine

The six belts start with the gasoline HEMI trucks and move through the 6.7 and 5.9 Cummins. Each listing names the engine it was matched to.

1. Gates FleetRunner Micro-V: Heavy-Duty Serpentine Belt for Ram 1500 5.7L V8, 2013-2020

Gates FleetRunner Belt for Ram 1500 5.7L product photo
Key features
  • Listed for Ram 1500 5.7L V8, 2013-2020
  • Gates FleetRunner heavy-duty Micro-V line
  • Multi-rib design for a direct OE-style fit
  • Sold in Gates packaging

Gates is a long-established belt maker, and FleetRunner is its heavy-duty Micro-V range aimed at work trucks and fleet vehicles. This listing is matched to the Ram 1500 with the 5.7L HEMI V8 for the 2013 to 2020 model years. It is sold as a genuine Gates part in its original packaging, and the seller describes it as a precise-fit, multi-rib direct replacement.

For a half-ton that tows a camper or a boat trailer through the summer, a heavy-duty belt makes practical sense. The HEMI’s accessory drive runs the alternator, A/C compressor and power steering pump off one belt, and a belt built for higher loads gives some margin when all three are working at once. The listing positions it as a fix for squeal and chirp caused by a cracked or glazed belt.

The fit check matters more than usual on this truck. The 2019 and 2020 range overlaps with the redesigned Ram 1500 and the 1500 Classic, and trucks with the eTorque system use a different belt. Enter your year, engine and build in Amazon’s fit tool before ordering. If your truck has eTorque or a 3.6L V6, this belt is not the one.

View Gates FleetRunner Belt for Ram 1500 5.7L on Amazon

2. Dayco Main Drive Serpentine Belt: Replacement for Ram 2500 5.7L and 6.4L V8, 2011-2019

Dayco Main Drive Belt for Ram 2500 HEMI product photo
Key features
  • Listed for Ram 2500 5.7L and 6.4L V8, 2011-2019
  • Main drive belt, one belt included
  • Made by Dayco, maker of belts since 1905
  • Restores grip on the accessory pulleys

Dayco started in Ohio in 1905 as Dayton Rubber, and the listing notes that the company introduced the first multi-ribbed serpentine belt. Today it supplies belts, hoses, tensioners, pulleys and timing kits. This listing is the main drive belt for the gasoline Ram 2500, matched to both the 5.7L and 6.4L HEMI V8 for the 2011 through 2019 model years, and the box holds one belt.

Gasoline three-quarter-ton trucks often work as plow rigs and tow vehicles, so the belt sees a hard life. The listing explains that a worn drive belt can squeal, chirp or slip, which leads to weak charging, poor A/C and lost power steering assist. A new belt restores grip on every accessory pulley, and the listing reminds you to inspect the tensioner and idler pulleys for wobble or noise while the belt is off.

Note the words main drive. Some engines carry a second, shorter belt for a single accessory, and this listing covers the main belt only. Follow the routing diagram under the hood when fitting it and confirm your engine and year with Amazon’s fit tool. It is not meant for the Cummins diesel or for Ram 1500 trucks.

View Dayco Main Drive Belt for Ram 2500 HEMI on Amazon

stunning aerial view of a winding road cutting through a dense green forest

3. Gates FleetRunner Micro-V: Heavy-Duty Serpentine Belt for Ram 2500 6.7L Cummins, 2013-2018

Gates FleetRunner Belt for Ram 2500 6.7L product photo
Key features
  • Listed for Ram 2500 6.7L L6, 2013-2018
  • Heavy-duty FleetRunner construction
  • Direct-fit multi-rib OE replacement
  • Genuine Gates part in original packaging

The 6.7 Cummins asks a lot of its belt. Along with the alternator and A/C compressor, it turns a large engine-driven fan, and diesel trucks spend long hours idling and pulling heavy trailers. This Gates FleetRunner listing is matched to the Ram 2500 with the 6.7L inline-six diesel for the 2013 to 2018 model years and is sold as a genuine Gates part in its own box.

FleetRunner is the Gates range made for commercial trucks and other hard-working engines, so it fits naturally on a diesel pickup. The seller describes it as a precise-fit multi-rib belt that replaces a cracked or glazed original and ends the squeal or chirp that comes with one. Owners who tow a fifth-wheel or a loaded equipment trailer are the ones most likely to value the heavy-duty build.

The listing names the Ram 2500, so if you drive a 3500 or a cab-and-chassis truck, confirm the fit separately. Trucks built with a second alternator can need a longer belt, so check how your truck is equipped and compare against the number on the old belt. Earlier 2010 to 2012 diesels have their own Gates listing.

View Gates FleetRunner Belt for Ram 2500 6.7L on Amazon

4. Mopar 4627751AA: Factory Serpentine Belt for Ram 2500, 3500, 4500 and 5500, 2013-2018

Mopar 4627751AA Serpentine Belt product photo
Key features
  • Mopar part number 4627751AA
  • Listed for Ram 2500 to 5500, 2013-2018
  • OE specification, direct replacement
  • Seller asks for your VIN before ordering

Mopar is the parts brand of the company behind Ram, and 4627751AA is its own part number for this serpentine belt. The listing names the Ram 2500, 3500, 4500 and 5500 for the 2013 to 2018 model years and describes it as an OE specification direct replacement. Independent cross-reference listings tie this number to the 6.7L Cummins with a single alternator, which is why the seller wants a VIN before shipping.

A factory belt suits owners who prefer to keep their truck exactly as built, or who run a fleet where every truck carries the same parts. It is also a handy reference point. If you have the old belt in hand and it carries a Mopar number, matching that number removes most of the guesswork, and aftermarket makers such as Gates list their equivalents against it.

Take the VIN request seriously. The model list on this listing covers several trucks, but the belt changes with engine and alternator setup, and the year range alone will not tell you whether it fits. Send the VIN, wait for confirmation and only then fit it. If your truck has dual alternators, ask for the matching factory belt instead.

View Mopar 4627751AA Serpentine Belt on Amazon

collection of vintage tools on a wooden table indoors with a retro vibe

5. Gates FleetRunner Micro-V: Serpentine Belt for Dodge Ram 2500 5.9L and 6.7L Cummins, 2003-2010

Gates FleetRunner Belt for Ram 2500 5.9L and 6.7L product photo
Key features
  • Listed for Dodge Ram 2500 5.9L and 6.7L L6, 2003-2010
  • Heavy-duty FleetRunner Micro-V belt
  • Covers the 5.9 to 6.7 changeover years
  • Genuine Gates part in original packaging

The 2003 model year brought the common-rail 5.9 Cummins, and the 6.7 took over partway through 2007. This Gates FleetRunner listing spans both engines in the Dodge Ram 2500 from 2003 to 2010, which makes it a useful pick for owners of the trucks many diesel fans still seek out. It is sold as a genuine Gates heavy-duty Micro-V belt in original packaging, described as a direct-fit OE replacement.

Trucks from these years are often well past 200,000 miles and still working, so the accessory drive tends to show its age. A new heavy-duty belt is a low-cost part of keeping one on the road, and it is a good moment to check the fan clutch, water pump pulley and tensioner as well. The listing says it ends the squeal and chirp of a cracked or glazed belt.

Because the range covers two engines and several trim levels, confirm your exact truck in Amazon’s fit tool before ordering. A 3500 or a truck with an added alternator may need a different length. Compare against the old belt’s label if you can still read it, and keep the old belt until the new one is fitted and quiet.

View Gates FleetRunner Belt for Ram 2500 5.9L and 6.7L on Amazon

6. A-Premium 8PK2058HD: 8-Rib, 81.04 in Heavy-Duty Belt for Dodge Ram 5.9L Cummins 12V and 24V, 1994-2002

A-Premium 8PK2058HD Belt for 5.9 Cummins product photo
Key features
  • 8 ribs, 81.04 in (2058 mm) effective length
  • Listed for Dodge Ram 2500 and 3500 5.9L Cummins, 1994-2002
  • Heavy-duty EPDM build with polyester cord
  • Cross-references K080810HD and 53040171AC

The second-generation Dodge Ram with the 5.9 Cummins, in both 12-valve and 24-valve form, has a loyal following, and its belt is easy to find with this listing. A-Premium matches it to the Dodge Ram 2500 and 3500 from 1994 to 2002 with the 5.9L Cummins and A/C. The listing gives eight ribs, an effective length of 81.04 inches (2058 mm) and a top width of 28 mm.

Construction is a heavy-duty EPDM body with a polyester cord, which the listing says resists heat and wear under load. It also lists cross-references to other part numbers, including K080810HD, 8PK2058HD and Mopar 53040171AC, which helps you match it against a label on the old belt. A-Premium states a one-year unlimited-mileage guarantee on the belt.

The listing pitches the belt as a cure for the chirp some owners hear from these engines. A new belt helps when the old one is glazed, but a chirp can also come from a tired tensioner, an idler bearing or a misaligned pulley, so check those too. Trucks without A/C use a different belt length, so confirm before buying.

View A-Premium 8PK2058HD Belt for 5.9 Cummins on Amazon

All Six Ram Belts at a Glance

The table sums up what each listing states. Use it to narrow the list to your engine, then confirm the exact year on Amazon.

BeltEngine on the listingTrucks and years listedWorth knowing
Gates FleetRunner5.7L HEMI V8Ram 1500, 2013-2020Heavy-duty Micro-V line
Dayco main drive5.7L or 6.4L HEMI V8Ram 2500, 2011-2019Main drive belt only
Gates FleetRunner6.7L Cummins I6Ram 2500, 2013-2018Heavy-duty diesel belt
Mopar 4627751AAConfirm by VINRam 2500-5500, 2013-2018Factory part, seller asks for VIN
Gates FleetRunner5.9L or 6.7L Cummins I6Dodge Ram 2500, 2003-2010Covers the 5.9 to 6.7 changeover
A-Premium 8PK2058HD5.9L Cummins 12V or 24VDodge Ram 2500 and 3500, 1994-20028 ribs, 81.04 in, with A/C
Best serpentine belt for Ram options by engine, based on what each Amazon listing states.

If your truck is not covered, such as a 4.7 V8, a 3.6 V6 or a newer eTorque 5.7, the same makers sell belts for those engines too. Our guide to choosing a serpentine belt brand explains how to read part numbers so you can find the correct size in another brand’s catalog.

aerial view of a lush green forest with a central roadway cutting through

Pulleys, Tensioner and Michigan Winters

A fresh belt on a worn tensioner often squeals within weeks. With the old belt off, turn the tensioner pulley and each idler by hand. Any grinding, roughness or play means that pulley should be replaced too, and an arm that flutters at idle points to a worn tensioner.

Belts wear out with age and mileage, and oil or coolant dripping onto the ribs speeds that up. Warning signs include a squeak at start-up, a battery light, A/C that cuts out, a rising temperature gauge on the diesels with a belt-driven fan, and a smell of hot rubber after a drive.

father and son enjoy bonding time in the garage

Grand Rapids weather adds its own load. A subzero start stiffens the rubber just as the alternator pushes hard to refill a cold battery, and diesel trucks often idle for long spells to warm up. Salt and slush also carry grit into the pulley grooves, so check the ribs for glazing after winter.

When to Hand the Job to a Shop

Most HEMI and Cummins belts can be changed in a driveway with a long breaker bar on the tensioner. Bring the truck in if the belt keeps walking off a pulley, if a new belt shreds quickly, or if the noise stays after the swap. Those point to a misaligned pulley, a failing bearing or a seized fan clutch rather than the belt itself.

empty road lined with dense green forest

Ram’s HEMI and Cummins engines drive their camshafts with a chain or gears, not a timing belt. If you own another vehicle that does run a timing belt, our timing belt replacement service in Grand Rapids covers that job, and it is the natural time to renew the accessory belt as well. The roundup of timing belt kit brands shows what a complete kit should include.

Frequently Asked Questions

What is the best serpentine belt for Ram trucks?

The one listed for your engine and year. Gates FleetRunner, Dayco and Mopar belts are solid choices for the HEMI and Cummins engines, provided the listing matches your truck.

Does a 5.7 HEMI Ram 1500 use the same belt every year?

No. Belt length changed between generations, and trucks with eTorque use a separate belt drive. Enter your year and engine before ordering.

Do Cummins trucks need a heavy-duty belt?

A heavy-duty belt is a sensible match for a diesel that tows or idles a lot. The 5.9 and 6.7 Cummins use a wide eight-rib belt, and heavy-duty versions are built for that load.

Should I replace the tensioner with the belt?

Replace it if the pulley feels rough, wobbles or the arm shakes at idle. On a high-mileage truck, doing the belt, tensioner and idlers together saves a second job later.

Hearing a squeal from your Ram on cold mornings, or a pulley that won’t stay quiet? Ram owners can call 456 AutoFix at 616-279-3832, Monday through Friday from 8 to 5, or request a belt check online.

Working the same hours we are? Bring the truck to 456 Carrier St NE, Grand Rapids, after closing and leave it with our after-hours drop-off.