As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
The Q50 badge covered four different engines in its run, so one plug set never suits them all. The best spark plugs for Q50 sedans are the ones listed for your engine and model year, in the electrode metal Infiniti designed that engine around.
Below we split the car by engine, explain what heat range and gap mean on a modern Infiniti, and review six sets whose listings name the Q50. If you want the wider brand picture first, read our spark plug guide across the major makers. Unsure whether your plugs are due at all? Our piece on how often to change spark plugs and the warning signs of wear walks through intervals and symptoms.
Quick answer
What spark plugs does an Infiniti Q50 take?
It depends on the engine. The 3.0t twin-turbo V6 takes NGK Laser Iridium plugs listed for 2016 and later cars, the 2014-2015 3.7 V6 takes NGK Laser Iridium, DENSO Iridium Long Life or NGK Ruthenium HX, and the hybrid takes the NGK DILKAR7B11. Confirm year and engine on Amazon before ordering.
Our Quick Picks
Three quick picks, one for each Q50 V6 engine. All six sets are reviewed below.

NGK Laser Iridium (Q50 3.0t)
A full set of genuine NGK plugs listed for the twin-turbo V6.

NGK Laser Iridium (Q50 3.7)
Genuine NGK long-life plugs for the naturally aspirated V6.

NGK DILKAR7B11
NGK's listed plug for the 3.5 gas-electric V6.
Four Engines Under One Q50 Badge
Start by finding out which engine you have, because the plug question splits four ways. Your registration, the emissions label under the hood or the trunk badge on most cars will tell you.
- 3.7 V6 (2014-2015): the naturally aspirated VQ37VHR from the G37, with the rear bank under the intake plenum.
- 3.5 hybrid V6 (2014-2018): the VQ35HR paired with an electric motor, and a different plug from the 3.7.
- 2.0t four-cylinder (2016-2019): we found no plug-only listing from an established plug maker naming this engine, so it has no pick below; get the part number from an Infiniti dealer.
- 3.0t twin-turbo V6 (2016-2024): the VR30DDTT in the 300 and 400 horsepower versions, including the Red Sport 400.
Infiniti publishes the owner’s manual and maintenance information for each model year on its INFINITI owner manuals and guides page. The maintenance booklet gives the replacement interval for your engine, which is the number to plan around.
Heat Range, Gap and Electrode Metal on a Q50 Plug
Three numbers decide the fit: thread and reach must match the head, heat range must match how hot the chamber runs, and the gap must match what the coil was built to fire across.
On NGK plugs, a higher heat number means a colder plug, and turbocharging, advanced timing or heavy load can call for a colder one. That is why tuned 3.0t owners sometimes step down a range. On a stock car, stay with the heat range the listing gives for your engine, because a plug that runs too cold fouls on short trips.
Electrode metal mostly decides service life. NGK’s Iridium IX line has Q50 listings too, but the seller quotes only 40,000 to 50,000 miles, so we left it out for a car designed around long-life plugs.
Best Spark Plugs for Q50, Engine by Engine
Each set below comes from NGK or DENSO, and each listing names the Q50 along with the engine and years it covers. Read the fitment line on Amazon against your own car before you buy.
1. NGK Laser Iridium 6 Pack: Iridium Center Plugs for Q50 3.0L V6 2016-2020

- Six genuine NGK Laser Iridium plugs
- Listed for Q50 3.0L V6, 2016-2020
- Iridium center, platinum ground
- Listing quotes 80,000-100,000 mile life
This six-pack holds a full set of genuine NGK Laser Iridium plugs, and the listing names the Q50 3.0L V6 for the 2016 through 2020 model years. That covers the twin-turbo VR30 in both standard and Red Sport 400 form. Buying the whole set in one box means every cylinder gets the same plug from the same batch, which keeps the spark even across both banks.
The Laser Iridium design pairs a fine iridium center electrode with a platinum pad on the ground electrode. Both metals resist the spark erosion that slowly widens the gap on a cheaper plug, and the seller quotes a typical life of 80,000 to 100,000 miles. On a direct-injected turbo engine, a gap that stays close to its original size helps the coils fire cleanly under boost, where a worn plug is most likely to misfire.
This is the set to buy for a stock 3.0t that is due for plugs, or one that has a misfire you have already traced to worn electrodes. It does not cover 2021 and later cars, so check the 96008 listing below for those years. Tuned cars may need a colder plug. Confirm your year, model and engine with Amazon’s fitment check before ordering.
View NGK Laser Iridium (Q50 3.0t) on Amazon
2. NGK Laser Iridium 96008: Heat Range 8 Plug for Q50 2016-2024

- NGK part number 96008
- Heat range 8, gap 0.03 in
- 26.5 mm reach, 14 mm thread
- Listed for Q50 2016-2024
NGK’s 96008 Laser Iridium plug is listed for the Q50 from 2016 through 2024, which makes it the listing to look at for the later 3.0t cars that the six-pack above does not reach. The title describes a single spark plug, so check the quantity on the page before checkout and order six for the V6.
The listing gives more of the numbers than most. It states a 0.03 inch gap, an NGK heat range of 8, a 26.5 millimeter reach and a 14 millimeter thread, with an iridium tip and a copper core in the center electrode. The copper core helps carry heat away from the firing end, and the fine iridium tip needs less voltage to fire, which suits a coil working against high cylinder pressure under boost.
This plug suits owners of 2021 to 2024 cars and anyone who would rather order by NGK part number than by kit. Because the listing does not state which engine it covers, read the fitment notes carefully and confirm that your Q50 is a 3.0t before buying. It is not the plug for a 3.7, a hybrid or a 2.0t, and a quick check with Amazon’s fitment tool against your year, model and engine settles the question.
View NGK Laser Iridium 96008 on Amazon

3. NGK Laser Iridium 6 Pack: Long-Life Iridium Plugs for Q50 3.7L V6 2014-2015

- Six genuine NGK Laser Iridium plugs
- Listed for Q50 3.7L V6, 2014-2015
- Iridium center, platinum ground
- Ships in original NGK packaging
For the naturally aspirated 3.7 V6 that powered the first two years of the Q50, this NGK six-pack is the closest match to a straight replacement. The listing names the Q50 3.7L V6 for 2014 and 2015, and the box holds a full set of genuine NGK Laser Iridium plugs in original packaging. Those years carried the VQ37VHR over from the G37, an engine many Infiniti owners already know well.
Like the 3.0t set, these plugs use a fine iridium center electrode and a platinum-tipped ground electrode, and the seller quotes a typical life of 80,000 to 100,000 miles. That long interval matters on this engine, because the rear three plugs sit under the upper intake plenum. Choosing a plug that lasts means you open that part of the engine as rarely as possible.
This set suits an owner who wants the same type of plug the engine was built around and plans to keep the car for years. It does not fit the 3.0t, the hybrid or the 2.0t, so match the engine before you order. If you are replacing plugs because of a misfire, inspect the coil boots while they are out. Confirm year, model and engine with Amazon’s fitment check before buying.
View NGK Laser Iridium (Q50 3.7) on Amazon
4. DENSO Iridium Long Life 6 Pack: 0.4 mm Iridium Plugs for Q50 3.7L 2014-2015

- 0.4 mm iridium center electrode
- 0.7 mm platinum ground electrode
- 360-degree laser-welded tip
- Listed for Q50 3.7L V6, 2014-2015
DENSO is the other main supplier of long-life plugs to Japanese engines, and this six-pack of Iridium Long Life plugs is listed for the 2014 and 2015 Q50 3.7L V6. It gives 3.7 owners a second maker to choose from when the NGK set is out of stock or when they simply prefer DENSO. The pack holds six genuine plugs in original packaging.
The listing spells out the construction: a 0.4 millimeter iridium center electrode, a 0.7 millimeter platinum ground electrode and a tip that is laser welded all the way around. A thinner center electrode concentrates the spark and needs less voltage to fire, while the platinum ground resists the wear that slowly opens the gap. The seller quotes a typical life of more than 100,000 miles, in line with a long-interval design.
These plugs suit a 3.7 owner looking for a long-life alternative to NGK from another established maker. They are built for this engine only, so they will not fit a 3.0t, a hybrid or a 2.0t Q50. Many owners keep to one brand across all six cylinders, and mixing brands is best avoided. Check your year, model and engine against Amazon’s fitment tool before you place the order.
View DENSO Iridium Long Life on Amazon

5. NGK Ruthenium HX 6 Pack: Ruthenium Center Plugs for Q50 3.7L V6 2014-2015

- Six genuine NGK Ruthenium HX plugs
- Ruthenium center electrode
- Listed for Q50 3.7L V6, 2014-2015
- Listing quotes 80,000-100,000 mile life
NGK’s Ruthenium HX line is the company’s newer long-life design, and this six-pack is listed for the Q50 3.7L V6 in the 2014 and 2015 model years. It is the third choice for the 3.7 in this guide, aimed at owners who want something other than the Laser Iridium plug the engine is commonly fitted with. The box contains six genuine NGK plugs.
The difference is the center electrode, which uses ruthenium rather than iridium. The listing highlights ignitability, meaning how readily the plug lights the air and fuel mixture, as the main benefit of that metal. The seller quotes a typical life of 80,000 to 100,000 miles, similar to the Laser Iridium set, so the service interval stays the same.
Choose this set if you want to try NGK’s ruthenium design on a stock 3.7, or if the Laser Iridium six-pack is unavailable. It is not a performance upgrade that changes how the engine makes power, and it is not listed for the 3.0t, the hybrid or the 2.0t. As with any plug, start each one by hand and torque it to the service figure. Run your Q50 details through Amazon’s fit checker before buying.
View NGK Ruthenium HX on Amazon
6. NGK Laser Iridium DILKAR7B11 6 Pack: Plugs for Q50 Hybrid 3.5L 2014-2016

- NGK part DILKAR7B11, six plugs
- Listed for Q50 Hybrid 3.5L, 2014-2016
- Laser-welded precious metal tips
- Gas/electric hybrid V6 application
The Q50 Hybrid uses a 3.5 V6 rather than the 3.7, and its plug is a different part. This NGK listing names the DILKAR7B11 Laser Iridium plug in a pack of six and states fitment for the Q50 Hybrid Premium from 2014 to 2016, with a 3.5 liter gas and electric V6. That makes it one of the few branded listings that addresses the hybrid directly.
The listing describes laser-welded precious metal electrodes with dual platinum contacts that reduce gap erosion, and calls the plug original equipment manufacturer approved. On a hybrid, the engine starts and stops often as the electric motor takes over at low speed. A long-life plug that keeps a consistent gap through those frequent restarts helps the engine pick up smoothly each time it fires.
This set suits owners of early Q50 Hybrid sedans who want the NGK part listed for their car. The listing stops at 2016, so owners of 2017 and 2018 hybrids should confirm the part number with a dealer or catalog before ordering. It will not fit the 3.7, the 3.0t or the 2.0t. Check year, model and engine with Amazon’s fitment tool before you buy.
Matching a Set to Your Q50
Use the table as a shortlist, then confirm the fitment for your exact year and engine on the listing itself.
| Engine | Years in the listing | Electrode type | Pick |
|---|---|---|---|
| 3.0t twin-turbo V6 | 2016-2020 | Iridium center, platinum ground | NGK Laser Iridium 6 pack |
| 3.0t twin-turbo V6 | 2016-2024 | Iridium tip, heat range 8 | NGK Laser Iridium 96008 |
| 3.7 V6 | 2014-2015 | Iridium center, platinum ground | NGK Laser Iridium 6 pack |
| 3.7 V6 | 2014-2015 | 0.4 mm iridium, platinum ground | DENSO Iridium Long Life |
| 3.7 V6 | 2014-2015 | Ruthenium center | NGK Ruthenium HX |
| 3.5 hybrid V6 | 2014-2016 | Laser Iridium DILKAR7B11 | NGK DILKAR7B11 6 pack |
A few cases fall outside this table. Hybrid cars from 2017 and 2018 need their own lookup, since the DILKAR7B11 listing stops at 2016, and the 2.0t needs a dealer part number.

Plug Day on a Q50 During a Michigan Winter
Long-life plugs can sit in an aluminum head for many years, and they tend to seize when they finally come out. Do the job on a cold engine, blow out each plug well with compressed air before you loosen anything, and turn a stubborn plug back and forth gently instead of forcing it. Grit and salt spray from West Michigan roads collect around the coils, and anything that drops into an open plug hole goes straight into the cylinder.
On the 3.7, the rear three plugs are the hard part, and many owners and shops remove the upper intake plenum to reach them. That means new plenum gaskets and a careful reassembly, so plan for a longer job than the front bank suggests.

Look at each coil boot while it is out. Oil in the plug well points to a leaking valve cover or tube seal, and a cracked boot can cause a misfire on a damp January morning that new plugs will not cure. Start each new plug by hand, then torque it to the figure in the service information rather than by feel.
When the Misfire Isn’t the Plugs
If the check engine light comes back, or flashes while you drive, something else is at work, and a flashing light means a misfire that can overheat the catalytic converter. Our check engine light diagnostic in Grand Rapids traces the code to a coil, injector, vacuum leak or compression fault.

The VQ and VR engines in the Q50 drive their camshafts with timing chains, so there is no belt to schedule alongside the plugs. If another car in your driveway does run a belt, our guide to timing belt kit brands and what a full kit includes explains the parts, and our timing belt and chain replacement in Grand Rapids covers the work on both designs.
More Buying Guides
Frequently Asked Questions
What are the best spark plugs for Q50 3.0t engines?
For a stock 3.0t, use an NGK Laser Iridium set listed for your model year, such as the six-pack for 2016-2020 cars or the 96008 plug for 2016-2024 cars. Tuned cars sometimes run one heat range colder, which is a choice to make with your tuner.
Do I need to regap new Q50 plugs?
Long-life iridium and ruthenium plugs come pre-gapped, and bending the ground electrode can damage the fine tip. Check the gap with a wire gauge if you like, compare it with the figure on the box or in the service information, and return any plug that is clearly off.
Should I change the ignition coils with the plugs?
Not automatically. Replace a coil when a misfire code follows it from cylinder to cylinder or the boot is cracked or oil soaked. If the coils are original on a high-mileage car, some owners replace them while the plugs are out to save doing the job twice.
Q50 still stumbling at idle after a new set, or throwing the same misfire code? Give 456 AutoFix a call at 616-279-3832, Monday to Friday 8am to 5pm, or set up a misfire check on our contact page.
Working through our weekday hours? The after-hours drop-off at 456 Carrier St NE, Grand Rapids lets you leave the Infiniti and its key at a time that works for you.
