As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Volkswagen TDI can run for hundreds of thousands of miles, but only if the timing belt is changed before it gives up. Choosing the best TDI timing belt kit starts with one detail many buyers skip: the three-letter engine code, because the ALH, the PD engines and the later 2.0 common rail diesels each take a different kit.
Below we sort six kits by engine family. For a wider look at the belt makers themselves, see our comparison of timing belt kit brands and what each box includes.
Quick answer
Which timing belt kit does my TDI need?
Match the kit to your engine code first. A Mk4 ALH takes a 321 application kit such as Gates TCKWP321M, the 1.9 PD engines take a 333 kit like Continental TB333LK1-MI, and the 2009 and later 2.0 common rail engines take a 342 kit such as Gates TCKWP342.
Our Quick Picks
Three quick picks, one for each TDI engine family: the ALH, the PD unit injector engines and the 2.0 common rail. All six kits are reviewed below.

Gates TCKWP321M
A complete Gates kit that parts catalogs list for the ALH engine.

Continental TB333LK1-MI
A Continental kit in the 333 application that the PD engines use.

Gates TCKWP342
A Gates kit with three idlers for the 2.0 TDI common rail engines.
Start With the Engine Code, Not the Model Year
The model year alone can mislead you, since a 2005 Jetta might carry either of two different 1.9 engines. The engine code appears on the vehicle data sticker, often in the service booklet or spare tire well, and a VIN decode at a parts counter will confirm it.
- 1.9 TDI ALH: the Mk4 Golf, Jetta and New Beetle diesel of roughly 1998 to 2004, with a rotary injection pump turned by the timing belt.
- 1.9 PD (BEW, BRM) and 2.0 PD (BHW): unit injector engines of about 2004 to 2006, where the camshaft drives the injectors and loads the belt harder.
- 2.0 common rail (such as CJAA): the 2009 and later Jetta, Golf and Audi A3 diesels, with a high pressure fuel rail.
A kit for one family will not fit another, so the best TDI timing belt kit for your car depends on that code. If you are hunting for the best timing belt kit for 1.9 TDI cars, you first need to know whether yours is an ALH or a PD engine.
What a Complete TDI Belt Kit Should Hold
The belt is the cheap part of this job. The labor to reach it is the expensive part, which is why most mechanics replace every rotating part on the belt drive at once. A worn idler or seeping pump can ruin a fresh belt.
- Belt, tensioner and idlers: the core of any kit; a new belt on old rollers is a false saving.
- Water pump: on the TDIs covered here, the timing belt also drives the pump, so it is normally replaced at the same visit.
- Cam and crank seals: some kits include them; if not, buy them if yours show any oil.
- Serpentine belt and small hardware: handy, since the accessory drive comes off to reach the timing cover.
The repair guide publisher ALLDATA points out that automakers may recommend replacing the water pump and tensioner along with the belt, since they are already exposed. Fix any oil or coolant leak first, since both shorten belt life. For more on mileage and warning signs, read our guide on when to replace a timing belt.
Best TDI Timing Belt Kit Options, Engine by Engine
We grouped six kits by engine family: two for the ALH, two for the PD engines and two for the 2.0 common rail diesels. Fitment comes from the listings and parts catalogs, so confirm your engine on Amazon.
1. Gates TCKWP321M: Timing Belt Component Kit with Water Pump

- Belt, tensioner, idlers and water pump
- Installation instructions in the box
- Technical Service Bulletins included
- Cross-references TB321LK1MI and WP321K1A
The Gates TCKWP321M is a full timing component kit for the 321 application, which parts catalogs list for the 1.9 TDI ALH engine with a metal impeller water pump. The ALH is the older Mk4 diesel with a rotary injection pump, and its timing belt drives the camshaft, the injection pump and the water pump together. Replacing every one of those moving parts in one visit is the reason most owners buy a kit instead of a bare belt.
According to the listing, the box holds the belt, idlers, tensioner, tensioner spring where the design uses one, the water pump and the supporting hardware. Gates also packs detailed installation instructions and Technical Service Bulletins for applications that have known trouble spots. The title cross-references Continental TB321LK1MI and other common kit numbers, which helps when you are comparing a part number from an old receipt.
This kit suits an owner or a shop that wants a single brand behind every rotating part on an ALH. It does not include the cam and crank seals or a serpentine belt, so plan on buying those separately if yours are seeping. Confirm the year, model and engine code on Amazon before ordering, since the 321 number does not cover the later PD engines.
View Gates TCKWP321M on Amazon
2. PartsFlow ALH Timing Belt Kit: Water Pump, Serpentine Belt and Seals

- Listed for 1998-2004 1.9 TDI ALH
- Timing belt, water pump and three rollers
- Cam seal and crank seal included
- Serpentine belt for A/C models
PartsFlow lists this kit for select 1998-2004 Volkswagen Beetle, Golf and Jetta models with the 1.9L ALH TDI engine. It is aimed at the same Mk4 diesel as the Gates 321 kit, but it bundles more of the small parts that come off during the job. The listing gives reference numbers 038121011AH and 058109244 so you can compare them with the parts already on the engine.
Inside you get a timing belt, a water pump, the tensioner, a roller, upper and lower idlers, a cam seal and a crank seal. A serpentine belt is also included for cars with air conditioning, which saves a second order once the accessory drive is apart. The listing asks you to verify mounting points, belt routing, alignment marks and the seal layout before installation, and it recommends professional installation.
This kit fits an ALH owner who wants the seals and accessory belt in one box rather than sourcing them separately. It is not a name-brand OE supplier kit, so inspect every bearing for smooth rotation and compare each part with the old one before it goes on. Check your year, model and engine code on Amazon, because it is not listed for the PD or common rail TDIs.
View PartsFlow ALH Kit on Amazon

3. Gates TCKWP333M: Timing Belt Component Kit with Metal-Impeller Water Pump

- Belt, tensioner, idlers and water pump
- Hydraulic tensioner where the design needs one
- Installation instructions and TSBs
- Cross-references TB333LK1MI and WP333K1B
The Gates TCKWP333M covers the 333 application, which retailer catalogs list for the 1.9 TDI BEW engine in 2004-2006 Golf and New Beetle models and in some 2005 Jettas. The BEW is a Pumpe Duse, or unit injector, engine. Its camshaft lobes drive the injectors directly, so the belt carries a heavier load than on the older ALH.
Gates describes the kit as a complete solution with the belt, idlers, tensioner, spring where needed, the water pump and supporting hardware, plus installation instructions and Technical Service Bulletins. The listing notes that hydraulic tensioners are included where the engine calls for one. Retailer catalogs describe this M version with a metal impeller water pump, and the title cross-references Continental TB333LK1MI and several other kit numbers.
This is the kit to look at first for a BEW car where you want one supplier behind the whole belt drive. Be careful with 2005 and 2006 Jettas, because some carry the BRM engine and catalogs do not agree on whether this exact number fits them. Confirm the year, model and engine code on Amazon, and read the engine code sticker or decode the VIN before you order.
View Gates TCKWP333M on Amazon
4. Continental TB333LK1-MI: Pro Series Timing Belt Kit with Water Pump

- Pro Series kit with water pump
- All parts needed for the belt job
- Installation instructions included
- Built to meet or exceed OE fit
Continental is a major original equipment belt supplier, and the TB333LK1-MI is its Pro Series kit with a water pump for the 333 application. Gates cross-references this exact number in its own TCKWP333M title, so the two kits target the same 1.9 PD engine family. That makes it a straightforward alternative if you prefer a Continental belt or one brand is out of stock.
The listing says the box holds all the components needed for a timing belt replacement, along with installation instructions. Continental states that its belt compounds are tested for performance and that the kit is designed to meet or exceed original equipment fit and performance. In Continental’s range the Standard Series kits come without a water pump, while this Pro Series kit includes one.
This kit suits a PD owner or shop that wants a name-brand alternative to Gates with the same layout of parts. The listing does not spell out each component or the vehicles it covers, so use the Amazon fitment checker and compare the contents with your old parts before you start. Confirm the year, model and engine code on Amazon, particularly on Jettas from 2005 and 2006 that may have the BRM engine instead.
View Continental TB333LK1-MI on Amazon

5. Gates TCKWP342: Timing Belt Component Kit with Water Pump for 2.0 TDI

- 1 belt, 1 tensioner and 3 idlers
- Water pump with plastic impeller
- Bolt and O-ring included
- Cross-references TB342LK1 and PP342LK1
The Gates TCKWP342 is aimed at the later 2.0 TDI common rail engines, which retailer catalogs list in 2009 and later Jettas and the 2010 Audi A3 TDI, among others. Unlike the older engines, this design fires the injectors from a common high pressure rail, but the timing belt still keeps the camshafts in step with the crankshaft and turns the water pump on these engines.
The listing spells out six components: one belt, one tensioner, three idlers and one water pump with a plastic impeller, plus the bolt and O-ring. Gates adds its usual installation instructions and Technical Service Bulletins. The title cross-references Continental TB342LK1 and PP342LK1 and several other kit numbers, which helps when you are comparing a quote or a past invoice.
This kit fits an owner of a 2.0 TDI from the common rail era who wants a known belt maker behind every pulley. It is not for the ALH or PD engines, which use a different belt and pump. The cam and crank seals are not listed, so order them separately if they show oil. Confirm the year, model and engine code on Amazon before buying, since VW used more than one 2.0 TDI engine code.
6. A-Premium Timing Belt Kit with Water Pump: 2.0L Diesel, Seals Included

- Listed for 2009-2014 Jetta 2.0L diesel
- Belt, tensioner and three idlers
- Water pump with O-ring
- Two cam seals and a crank seal
A-Premium lists this kit for the 2009-2014 Volkswagen Jetta 2.0L, the 2010-2013 Golf 2.0L and the 2010-2013 Audi A3 2.0L, all diesel. The listing also flags it as an interference engine application, a useful reminder that a slipped belt on these engines can let the pistons hit the valves. The water pump uses a plastic impeller, matching the design on these common rail engines.
The parts list is longer than some name-brand kits. It includes the timing belt, the tensioner, lower, upper and left idlers, the water pump with its O-ring, two camshaft front seals and a crankshaft front seal. Having the seals on hand means you can replace them while the sprockets are off, instead of finding a leak a month later and opening the front of the engine again.
This kit suits a 2.0 TDI owner who wants the seals in the same box and is comfortable checking parts carefully before installation. It is not a recognized OE supplier brand, so spin each idler by hand and compare every part with the original. A-Premium asks buyers to enter their vehicle details in the Amazon fitment tool, so confirm the year, model and engine code there before ordering.
View A-Premium 2.0 TDI Kit on Amazon
The Six Kits Side by Side
Use this table to narrow the list to the two kits for your engine, then compare what each includes.
| Kit | Engine family | Water pump | Extras in the box |
|---|---|---|---|
| Gates TCKWP321M | 1.9 TDI ALH | Included, metal impeller | Instructions and TSBs |
| PartsFlow ALH Kit | 1.9 TDI ALH | Included | Cam seal, crank seal, serpentine belt |
| Gates TCKWP333M | 1.9 PD (BEW) | Included, metal impeller | Instructions and TSBs |
| Continental TB333LK1-MI | 1.9 PD | Included | Instructions |
| Gates TCKWP342 | 2.0 common rail | Included, plastic impeller | Bolt and O-ring |
| A-Premium 2.0 TDI Kit | 2.0 common rail | Included, plastic impeller | Two cam seals, crank seal |
For an ALH, the Gates kit gives you one brand on every rotating part, while the PartsFlow kit saves a separate order for seals. That is the short answer to the best timing belt kit for ALH TDI question: pick the supplier you trust, then add the seals if the kit leaves them out.

On the PD engines, the Gates and Continental 333 kits are cross-referenced, so availability can decide. On a common rail 2.0, the best TDI timing belt kit is the one that matches your engine code and includes the seals you need.
Why a TDI Belt Change Is Shop-Level Work
Every TDI here is an interference engine. If the belt skips a tooth or breaks, the pistons can hit the valves, and a cheap belt job becomes a cylinder head repair or worse. Our explainer on timing belts vs timing chains covers why belt engines need this scheduled attention.
The job needs engine-specific locking tools to hold the camshaft and crankshaft at the correct position while the old belt comes off. On the ALH, the injection pump sprocket is locked too, and the pump timing should be checked with a scan tool after the new belt is on.

The PD engines add their own challenge, because the belt also drives the unit injectors through the camshaft. Tension has to be set exactly to the procedure.
West Michigan winters add one more reason to stay on schedule. Freezing mornings are hard on any diesel, and a snapped belt in Grand Rapids traffic means a tow and a damaged engine. If your TDI is due, our timing belt replacement service in Grand Rapids can handle the kit you choose.

More Buying Guides
Frequently Asked Questions
Does a 1.9 TDI ALH kit fit the BEW or BRM engine?
No. The ALH uses a rotary injection pump and a different belt layout from the PD engines. ALH kits are usually sold under the 321 application, while BEW kits use the 333 number. Check your engine code before ordering.
Should I replace the water pump with the TDI timing belt?
Yes, in most cases. The timing belt drives the water pump on these engines, so a leaking or noisy pump can ruin a new belt. Replacing it at the same visit avoids paying for the same labor twice.
Is a TDI an interference engine?
Yes. The TDI engines covered here are interference designs, so a broken or skipped belt can let the pistons strike the valves. That is why the belt should be changed on schedule rather than run until it fails.
Can I change a TDI timing belt without special tools?
It is not a good idea. Each engine needs locking tools to hold the camshaft and crankshaft in place, and the ALH also needs its injection pump timing checked afterward. Without them, the timing can end up a tooth off.
Picked a kit but would rather not lock the cams yourself? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up your TDI belt service through our contact page.
Busy during shop hours? Our after-hours drop-off lets you leave your diesel with us in Creston, at 456 Carrier St NE.
