456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Spec Sheet or Ester Base? Liqui Moly vs Redline in 5W-20

liqui moly vs redline: serene black and white image of a road lined with trees and power lines under a textured sky

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

The liqui moly vs redline question tends to come up when someone with a V8 truck or muscle car wants something more interesting than the usual parts-store jug. One brand is a German company that prints long spec and approval lists, and the other is a California blender whose ester oils are a fixture at race tracks. Both sell for more than a typical synthetic, so it helps to know what each maker actually says about its oil.

We kept this matchup to one grade, SAE 5W-20, and one reference engine: a Chrysler-family gasoline engine whose manual calls for 5W-20 meeting Chrysler’s MS-6395 standard, as many 5.7 HEMI V8s do. Liqui Moly Special Tec AA 5W-20 faces Red Line 5W20 Motor Oil, and Pennzoil Platinum 5W-20 joins as a mainstream third option. If your engine takes another grade, start with our roundup of full synthetic motor oils instead.

Quick answer

Which 5W-20 suits an MS-6395 engine, Liqui Moly or Red Line?

Choose Liqui Moly Special Tec AA if you want a jug that lists current API SQ and ILSAC GF-7A and that the maker recommends for MS-6395. Choose Red Line 5W20 for a modified or hard-worked engine where an ester base matters more. Choose Pennzoil Platinum if you want MS-6395 stated on a five-quart jug.

Our Quick Picks

Liqui Moly Special Tec AA and Red Line 5W20 in the same grade, plus Pennzoil Platinum 5W-20 as a close mainstream rival that states Chrysler MS-6395 on its listing. Each one is reviewed in full below.

Liqui Moly Special Tec AA 5W-20 product photo
Spec sheet pick

Liqui Moly Special Tec AA 5W-20

Full synthetic, 5W-20, 5 liters

Liqui Moly's 5W-20 for Asian and American gas engines.

SuitsHEMI, Ford and Asian engines that call for 5W-20
View on Amazon →
Red Line 5W20 Motor Oil product photo
Ester base pick

Red Line 5W20 Motor Oil

Ester synthetic, 5W-20, 1 gallon

Red Line's ester and PAO oil with full lab data published.

SuitsModified, towing and hard-driven 5W-20 engines
View on Amazon →
Pennzoil Platinum 5W-20 product photo
Mainstream rival

Pennzoil Platinum 5W-20

Full synthetic, 5W-20, 5 quarts

A widely stocked 5W-20 that names MS-6395 outright.

SuitsDaily-driven HEMI, Ford and GM engines on 5W-20
View on Amazon →

Why 5W-20 Keeps This Comparison Honest

Putting a thin oil from one brand against a heavy racing grade from the other would tell you nothing. Both makers sell a 5W-20, and it is a grade that many Chrysler, Ford and Honda engines from the last two decades list, so the bottles can be judged on chemistry and paperwork instead of thickness. The 5W part is the winter rating, and the 20 describes how thick the oil stays once the engine is fully warm.

Red Line publishes the lab numbers behind its 5W20: 9.0 cSt at 100 degrees C, a viscosity index of 148 and a high temperature, high shear figure of 3.1 cP. Liqui Moly describes Special Tec AA as a fully synthetic, low viscosity oil built for modern Asian and American gasoline engines, including direct injection and turbo designs, but its US product page does not list the same lab data.

That means the liqui moly vs redline decision in this grade has nothing to do with which oil is thicker. It turns on two things: whose label matches the spec in your manual, and how much you value an ester base and published test figures.

Licenses or Suitable Replacements? Reading Both Labels

Liqui Moly lists API SQ and ILSAC GF-7A under approvals for Special Tec AA 5W-20, which are the current gasoline categories. It then names the specs it recommends the oil for, starting with Chrysler MS-6395 and moving through Ford WSS-M2C945-A, GM dexos1 Gen 3 and several Asian makers. For a truck still under a powertrain warranty, a current API category on the spec sheet is what most service advisors look for first.

Red Line words its list differently. The Red Line 5W20 product page calls the oil a “suitable replacement for” API SN, SM and SL, ACEA A5/B5, Ford WSS-M2C945-A, GM dexos1, a run of Honda, Mazda and Toyota part numbers, and Mopar MS-6395. That phrase is Red Line’s own judgment of where the oil works, not a license from API or from the carmaker, and the page does not list the newer API SP or SQ categories.

Neither approach makes an oil good or bad. A listed approval tells you the bottle is meant to pass a set of industry tests, while Red Line’s list tells you where the blender believes its formula performs. If your warranty paperwork names a specific category, buy the bottle that prints it.

DetailLiqui Moly Special Tec AA 5W-20Red Line 5W20Pennzoil Platinum 5W-20
Size linked5 liters1 gallon5 quarts
Chrysler MS-6395Recommended by Liqui Moly“Suitable replacement,” per Red Line“Meets or exceeds,” per the listing
API category statedAPI SQ, ILSAC GF-7AAPI SN/SM/SL, as replacementAPI SQ, ILSAC GF-7A
Lab data publishedNot on the US pageHTHS 3.1 cP, NOACK 8%, VI 148Not in the listing
Liqui Moly vs Red Line in 5W-20, with Pennzoil Platinum for reference, from each maker’s page and the Amazon listings

Liqui Moly vs Redline 5W-20: A Closer Look at Each Jug

Every oil below is a 5W-20, so none of them changes the grade your engine was designed around. Before ordering, read the oil cap or the maintenance section of your manual to confirm the grade and any spec it names.

LIQUI MOLY Special Tec AA 5W-20: Fully Synthetic Oil with API SQ and ILSAC GF-7A, 5 Liter

Liqui Moly Special Tec AA 5W-20 product photo
Key features
  • Fully synthetic low viscosity 5W-20, SKU 2259
  • Lists API SQ and ILSAC GF-7A, per Liqui Moly
  • Recommended for Chrysler MS-6395 and Ford WSS-M2C945-A
  • Mixes with all commercially available motor oils

Liqui Moly Special Tec AA 5W-20 is the German brand’s oil developed for modern Asian and American gasoline engines. This Amazon listing is the 5-liter jug, SKU 2259, which works out to a little over five quarts. Many V8s that take 5W-20 hold more than that, so check your capacity and plan on an extra liter if needed.

On its US product page, Liqui Moly lists API SQ and ILSAC GF-7A under specifications and approvals, the current gasoline categories. It then recommends the oil where Chrysler MS-6395, Ford WSS-M2C945-A and 945-B1, GM dexos1 Gen 3 or several Asian makers’ specs are required. The maker describes a fully synthetic, low viscosity oil whose additive package targets wear protection, engine cleanliness and low oil and fuel consumption, and it calls the oil well suited to direct injection and turbocharged engines. The Amazon listing adds stability to aging and says it is miscible with all commercially available motor oils.

That combination makes it the easier pick for a truck or SUV under warranty whose manual names MS-6395, because a current API category is printed on the spec sheet. Liqui Moly publishes no HTHS or NOACK figures on the US page. It is not the jug for an engine that calls for 0W-20 or a European approval.

View Liqui Moly Special Tec AA 5W-20 on Amazon

peaceful dirt road lined with lush greenery and towering trees in a sunny forest

Red Line 15205 5W20: Ester/PAO Full Synthetic Motor Oil, 1 Gallon

Red Line 5W20 Motor Oil product photo
Key features
  • Polyol ester and PAO full synthetic, part 15205
  • One-gallon jug, four quarts
  • HTHS 3.1 cP and NOACK 8%, per Red Line
  • Suitable replacement for MS-6395 and Ford 945-A, per Red Line

Red Line 5W20 Motor Oil belongs to the company’s High-Performance line, and this listing is the one-gallon jug, part 15205. A gallon is four quarts, so a V8 that takes six or seven quarts will need a second gallon or a few of the matching quart bottles, part 15204. The listing describes it as a full synthetic for passenger cars, light trucks, performance vehicles and marine use.

The base is a blend of polyol ester and PAO, which Red Line says has natural multi-grade properties and avoids unnecessary additives that hinder lubricity. Its product page lists 9.0 cSt at 100 degrees C, a viscosity index of 148, a NOACK evaporation loss of 8 percent and a high temperature, high shear figure of 3.1 cP. The pour point is minus 49 degrees F. Red Line also says high detergency allows extended drains and helps fuel economy and ring seal, though it gives no mileage figure.

Red Line calls the oil a suitable replacement for API SN, SM and SL, ACEA A5/B5, Ford WSS-M2C945-A, GM dexos1, Honda, Mazda and Toyota part numbers and Mopar MS-6395. That is the blender’s own guidance, not a license. It suits an out-of-warranty, towing or modified engine whose owner values the ester chemistry most.

View Red Line 5W20 Motor Oil on Amazon

Pennzoil Platinum 5W-20: Full Synthetic Motor Oil Made from Natural Gas, 5 Quarts

Pennzoil Platinum 5W-20 product photo
Key features
  • Full synthetic 5W-20 made from natural gas
  • API SQ and ILSAC GF-7A, per the listing
  • Meets or exceeds Chrysler MS-6395 and dexos1 Gen 3
  • Five-quart jug

Pennzoil Platinum 5W-20 is the third pick because it is the kind of mainstream jug many owners weigh against both premium brands. We also review this same listing in our Pennzoil vs Castrol 5W-20 comparison, and it fits here because it states the MS-6395 spec plainly. This is the five-quart jug, which covers many V6 engines in one purchase.

Pennzoil says the oil is a full synthetic made from natural gas and designed for high-performance engines. The listing states that it meets or exceeds API SQ Resource Conserving and ILSAC GF-7A, plus Chrysler MS-6395, GM dexos1 Gen 3 and Ford WSS-M2C970-A. It also claims pistons cleaner than the Sequence IIIH standard requires, faster low-temperature flow and better fuel economy under the latest industry standards. Pennzoil backs it with a 15,000-mile protection guarantee, and the listing points to the Shell Technical Help Desk for a full approval list.

Compared with Liqui Moly and Red Line, Pennzoil Platinum offers no ester base and no published lab figures, but it is easy to find in five-quart jugs. It is a sensible choice for a daily-driven truck on the factory schedule. Confirm the year, model, engine and capacity before you order.

View Pennzoil Platinum 5W-20 on Amazon

idyllic rural scene with a winding dirt road through lush green fields and trees

Matching Each Jug to the Engine in Your Driveway

Most owners can settle the liqui moly vs redline choice in a minute once they know the spec on their oil cap and how the vehicle is used. Find the row below closest to your situation.

Your situationReach forWhy
HEMI truck in warranty, manual lists MS-6395Special Tec AA 5W-20Lists API SQ and recommends it for MS-6395
Towing or modified V8, out of warrantyRed Line 5W20Polyol ester and PAO base with published HTHS
Want five quarts from any parts storePennzoil Platinum 5W-20MS-6395 and API SQ stated on the listing
Ford or Honda that calls for 5W-20Special Tec AA or Red LineBoth name Ford and Honda specs
Manual lists a spec none of these showA bottle that prints that specThe label outranks the brand
Liqui Moly Special Tec AA, Red Line 5W20 and Pennzoil Platinum 5W-20 matched to common owner situations

Switching between the two brands is simple. Red Line says all of its products are completely compatible with conventional and synthetic motor oils, and Liqui Moly says Special Tec AA mixes with all commercially available motor oils. A quart of one on top of the other is fine until the next change.

serene rural landscape with a sunlit road and lush green trees in springtime

Owner chatter on the liqui moly vs redline topic splits in a familiar way. Truck forum members tend to favor whatever bottle shows a current API category, while drag racers and engine builders talk up ester chemistry and how clean Red Line engines look at teardown. Read those threads as personal experience, since none of them is a controlled test.

Below-Zero Mornings in Grand Rapids

A truck that sleeps outside in a West Michigan January needs oil that reaches the lifters within seconds of a cold start. Red Line lists a pour point of minus 49 degrees F for its 5W20 and a cold cranking figure measured at minus 30 degrees C, and Liqui Moly calls Special Tec AA a low viscosity oil for modern engines. Our guide to motor oil for cold weather driving explains what the winter number means on any bottle.

winding road in Iceland with snow-covered mountains and open landscape

Whatever you pour in, the dipstick belongs in your routine, because a low reading is easy to miss on a big V8. Turbocharged and direct-injection engines can be even more prone to using oil between services, and our article on why the Audi 2.0T burns oil walks through causes that apply to many engines of that design. A slow drop is a reason to top up and track the trend, not to switch brands.

Short winter errands add one more factor. A ten-minute trip in freezing weather rarely heats the oil enough to drive off condensation and fuel, so many manuals put that kind of use on the severe service schedule. That shortens the interval for both brands equally.

Change Intervals and When to Call a Mechanic

Both makers mention extended drain intervals, and both hedge it: Liqui Moly says to follow the vehicle manufacturer, and Red Line gives no mileage figure. Your owner’s manual or oil life monitor still sets the schedule. If a change has slipped well past due, our page on how long an engine can go without an oil change lists the warning signs.

picturesque dirt road flanked by lush summer wildflower fields under a dramatic sky

Some symptoms need more than fresh oil: a flickering oil pressure light, a ticking lifter that does not quiet down once warm, or a level that falls fast between services. You are welcome to bring your own jug of Liqui Moly or Red Line for an oil change at our Creston shop, or we can match the grade and spec your manual lists. Hendrick Hoffman, who owns the shop and leads the work, is ASE and State of Michigan certified in engine repair and engine tune-up.

Frequently Asked Questions

Is Red Line better than Liqui Moly?

Neither wins in every engine. Red Line 5W20 offers a polyol ester and PAO base with published lab data, while Liqui Moly Special Tec AA lists the current API SQ and ILSAC GF-7A categories. Start with the grade and spec in your manual, then weigh how hard the engine works.

Is Red Line 5W20 approved for MS-6395?

Red Line describes its 5W20 as a suitable replacement for Mopar MS-6395, along with Ford, GM, Honda and Toyota specs. That is the maker’s own guidance rather than a Chrysler license, so a warranty claim may go more smoothly with a bottle that prints the spec or a current API category.

Can I use Liqui Moly Special Tec AA in a HEMI?

If the manual or oil cap calls for 5W-20 to MS-6395, yes. Liqui Moly recommends Special Tec AA 5W-20 for that spec. Confirm the year, model and engine first, because some later engines call for a different grade.

Can I top up Liqui Moly with Red Line?

Yes, as long as the grade matches. Both makers say their oils mix with other conventional and synthetic motor oils, so a mixed top-up is fine until your next scheduled change.

Rather leave the oil choice and the mess to someone else? Reach 456 AutoFix at 616-279-3832 between 8am and 5pm on weekdays, or request an oil change appointment online.

Busy during our hours? Bring the car to 456 Carrier St NE in Creston whenever it suits you and use the after-hours drop-off, and we will take it from there.