456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

How to Choose the Best Cordless Grease Gun

best cordless grease gun: blurred tail lights of car speeding on a scenic mountain road during evening hours

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Pumping a manual gun a few dozen strokes per fitting gets old fast on a pickup with a full set of zerks, a trailer and a lawn tractor. The best cordless grease gun takes that strain off your hand: pull the trigger, hold the coupler square and let the motor do the pumping.

Below you’ll find what actually differs between battery guns, six models from DeWalt, Milwaukee, Lincoln and Alemite, and a few habits that keep a powered gun from overfilling a joint. If you’d rather stay with hand-pumped tools, our pistol grip, lever and mini grease gun picks cover those.

Quick answer

Which battery grease gun should you buy?

Start with the battery system you already own. The DeWalt DCGG571M1 is a complete 20V kit with a 42 inch hose, the Milwaukee M18 2646-20 adds a 48 inch hose and a grease counter for M18 owners, and the compact M12 2446-21XC suits cars and light trucks where space is tight.

Our Quick Picks

Three places to start: a complete DeWalt 20V kit, the long-hose Milwaukee M18 for owners of that platform and the compact Milwaukee M12 for tight engine bays. All six battery guns are reviewed below.

DeWalt DCGG571M1 product photo
Complete starter kit

DeWalt DCGG571M1

20V MAX · 10,000 PSI · 42 in hose

A ready-to-run DeWalt kit with a variable speed trigger.

SuitsCars, trucks and trailers
View on Amazon →
Milwaukee M18 2646-20 product photo
Pick for M18 owners

Milwaukee M18 2646-20

M18 · 10,000 PSI · 48 in hose

Long hose, two speeds and a dial that counts grease delivered.

SuitsTrucks, farm and equipment fittings
View on Amazon →
Milwaukee M12 2446-21XC product photo
Compact choice

Milwaukee M12 2446-21XC

M12 · 8,000+ PSI · 14 in long

A shorter, lighter battery gun that reaches where 20V guns won't fit.

SuitsCars, light trucks and tight spaces
View on Amazon →

Pressure, Flow, Hose and Battery: What Sets Battery Guns Apart

Nearly every name-brand battery gun is listed at around 10,000 PSI, so that number rarely decides anything. Maximum pressure is what the pump can reach against a blocked fitting; it helps you push past old, hardened grease but says little about speed. Flow rate, given in ounces per minute, tells you how quickly a cartridge empties into a big joint.

  • Hose length: a 36 to 48 inch hose lets you set the gun down and hold the coupler with one hand while the other works the trigger.
  • Runtime: makers state it as cartridges or tubes per charge. Seven is plenty for a vehicle; a farm or fleet may want more.
  • Air bleeder and priming: after each cartridge swap, a bleeder valve gets trapped air out so the pump catches grease again.

Battery platform matters more than any single spec. A bare tool costs less only if the batteries on your shelf already fit it, and Milwaukee describes its M18 grease gun with a pre-set grease counter that sits on the same packs as its drills and impacts.

Best Cordless Grease Gun for the Money or for Heavy Equipment

Value usually comes down to reuse. If you own DeWalt 20V or Milwaukee M18 tools, a tool-only gun gets you running without another charger on the bench. If you own neither, a full kit with a battery and charger, like the Lincoln PowerLuber with two packs, avoids buying pieces separately.

Tractors, skid steers, plows and dump bodies change the priorities. Large pins take a lot of grease each, so flow rate and cartridges per charge start to matter, along with a hose long enough to reach a loader arm from the ground.

Best Cordless Grease Gun Models, One by One

Every spec below comes from the maker’s Amazon listing, and grease cartridges are sold separately. Kits include a battery and charger; the bare tools do not.

1. DeWalt DCGG571M1: 20V MAX 10,000 PSI Grease Gun Kit with 42″ Hose

DeWalt DCGG571M1 product photo
Key features
  • Up to 10,000 max PSI
  • Up to 5.0 oz/min output
  • 42 in flexible hose and LED light
  • Battery and charger included

The DeWalt DCGG571M1 is the kit version of DeWalt’s 20V MAX grease gun, so the box holds the gun, a battery and a charger. DeWalt lists a motor that reaches up to 10,000 max PSI, enough to push through a fitting clogged with old grease, and a pump that moves up to 5.0 ounces per minute when you need volume.

A variable speed trigger lets you ease grease into a small sealed joint or squeeze harder for a large pin. The 42 inch flexible hose reaches fittings behind brackets and up inside a wheel well, while an LED light shows the zerk in a dark corner. A filter screen keeps dirt out of the pump, an air-bleeder valve helps it prime after a cartridge change, and a no-mar foot lets the gun stand on a flat surface between fittings.

This is a sensible first powered gun for anyone without a battery platform, or for DeWalt owners who want a spare pack. It covers cars, pickups, trailers and lawn equipment. If you already own several 20V batteries, the tool-only version saves buying another charger, and owners who grease big machinery all day may want the faster DCGG581GD1.

View DeWalt DCGG571M1 on Amazon

2. Milwaukee M18 2646-20: 2-Speed 10,000 PSI Grease Gun with 48″ Hose (Bare Tool)

Milwaukee M18 2646-20 product photo
Key features
  • 10,000 PSI max operating pressure
  • 48 in flexible hose
  • Pre-set grease counter dial
  • Lock-on / lock-off trigger

The Milwaukee 2646-20 is the bare-tool M18 grease gun, which means it ships without a battery or charger and runs on the same M18 packs as Milwaukee’s drills and impact wrenches. Milwaukee lists 10,000 PSI maximum operating pressure and a two-speed design, so you can pick a gentle setting for car joints or a faster one for larger fittings.

Its 48 inch flexible hose is among the longer ones here, which helps when a fitting sits on a loader arm, a kingpin or the far side of a trailer axle. A lock-on and lock-off trigger saves your finger on long runs, and an air bleeder valve speeds priming after a cartridge swap. The pre-set grease counter dial is the unusual feature: you set it to stop after a chosen amount, which helps keep each fitting consistent.

This gun makes the most sense if your shelf already holds M18 batteries, since the bare tool avoids paying for another pack. It suits truck owners, farms and small fleets with many fittings. Without M18 batteries, a complete kit is the simpler purchase, and for a cramped engine bay the smaller M12 version is easier to aim.

View Milwaukee M18 2646-20 on Amazon

solitary truck travels along a desert highway with mountainous terrain in the distance

3. Milwaukee M12 2446-21XC: 12V Cordless Grease Gun Kit with Over 8,000 PSI

Milwaukee M12 2446-21XC product photo
Key features
  • Over 8,000 PSI max operating pressure
  • Up to seven cartridges per charge
  • 14 in long, 7.2 lb
  • M12 XC battery and 30-minute charger

The Milwaukee 2446-21XC is a 12-volt grease gun kit that trades a little pressure for a smaller, lighter package. Milwaukee lists more than 8,000 PSI maximum operating pressure, which still covers typical car and light truck fittings, and up to seven cartridges per charge from the included M12 XC battery. A 30-minute charger and accessories come in the kit.

At 14 inches long and 7.2 pounds, it is easier to hold up under a car on stands or to angle between a control arm and a frame rail than a full-size 20V gun. Integrated hose storage keeps the line from flopping around in a toolbox, and an LED fuel gauge shows how much charge is left before you start a round of fittings.

This gun suits drivers who grease a car, a pickup and maybe a mower, and owners who already run M12 tools. Seven cartridges per charge is plenty for that kind of seasonal work. It is not the right tool for a farm or fleet that empties many tubes in a session; a 20V gun with a longer hose and higher flow rate will finish that work sooner.

View Milwaukee M12 2446-21XC on Amazon

4. Lincoln 1884 PowerLuber: 20V 10,000 PSI 2-Speed Grease Gun with 36″ Hose and Two Batteries

Lincoln 1884 PowerLuber product photo
Key features
  • Up to 10,000 PSI
  • Trigger-operated 2-speed
  • 36 in high-pressure hose
  • Two 20V Li-ion packs, charger and case

The Lincoln 1884 PowerLuber comes from a company that specializes in lubrication equipment rather than general power tools. The kit includes the 20-volt gun, two lithium-ion battery packs, a 120V charger, a carrying case and a 36 inch high-pressure hose. According to the listing, it reaches up to 10,000 PSI from a high-ratio powerhead, with a trigger-operated two-speed design.

Lincoln points to its internal parts: a hardened steel piston, low-friction metal gearing, a precision-seated check ball and a dual-lip grease follower that helps keep grease from bypassing in the barrel. A built-in vent valve purges trapped air for easier priming. The three-point base keeps the gun upright on the floor or a tailgate, and a built-in LED light brightens the fitting. It takes standard 14 oz grease cartridges, sold separately.

Having two packs means one can charge while the other works, which helps a lot on a long greasing day across trucks, trailers and farm machinery. Because it runs on Lincoln’s own batteries, it fits buyers who don’t own a power tool platform yet. If your garage is already full of DeWalt or Milwaukee packs, a gun on that system makes more sense.

View Lincoln 1884 PowerLuber on Amazon

black and white close-up of an angle grinder creating sparks on metal

5. Alemite 597-B: 20V Grease Gun with 4.0 Ah Battery, LCD Display and 18″ Hose

Alemite 597-B product photo
Key features
  • 20V 4.0 Ah battery
  • Up to 40 cartridges per charge
  • LCD with battery, cartridge level and grease meter
  • Dual flow rates

The Alemite 597-B is a 20V grease gun built for long maintenance rounds. Its 4.0 Ah battery is listed at up to 40 cartridges per charge, far more than a typical driveway job needs and a real advantage on a fleet or farm. The kit includes the battery, a charger, an LED flashlight and a heavy-duty carrying case.

The multi-function LCD sets it apart. It shows battery capacity, how much grease is left in the cartridge and a running grease meter, which helps when a maintenance schedule calls for a measured amount at each point. A switch picks between two flow rates, and Alemite describes patented airflow management meant to protect the motor and transmission. The 18 inch flexible hose is shorter than most here, so you work closer to each fitting.

This gun suits shops, fleets and equipment owners who grease dozens of points at a time and want to track what goes in. For one car or a pickup, the display and runtime are more than you need. The short hose also makes it less handy for fittings deep under a truck, where a 42 to 48 inch hose lets you keep the gun at your side.

View Alemite 597-B on Amazon

6. DeWalt DCGG581GD1: 20V MAX 2-Speed Grease Gun with 9 oz/min Output and 47″ Hose

DeWalt DCGG581GD1 product photo
Key features
  • Up to 9 oz per minute
  • 10,000 max PSI
  • 2 speeds plus variable trigger
  • Reinforced 47 in hose, oil-resistant battery

The DeWalt DCGG581GD1 is a newer 20V MAX grease gun aimed at higher volume work. DeWalt lists up to 9 ounces per minute, well above the 5.0 listed for the older DCGG571, along with up to 10,000 max PSI for blocked fittings and up to seven tubes per charge. The kit includes an oil-resistant battery, a charger and a kit box.

Two speeds work together with a variable speed trigger, so you can run the fast setting on a loader pin and the slow one on a sealed tie rod end without changing guns. The reinforced 47 inch hose is long enough to reach fittings on a loader arm or under a pickup bed while the gun rests nearby, and an onboard LED helps you line up the coupler.

This model fits the heavy equipment side of the market: tractors, skid steers, snow plows and dump trailers where each fitting takes a lot of grease. On a car, the high output means you need a light touch on the trigger to avoid overfilling a boot. Drivers with only a vehicle or two may find the DCGG571 or a compact 12V gun easier to manage.

View DeWalt DCGG581GD1 on Amazon

Six Battery Grease Guns at a Glance

Figures are each maker’s stated numbers. Actual pressure and output at a fitting change with grease grade, temperature and how clogged the zerk is.

Grease gunBatteryListed pressure, output or hoseGood match for
DeWalt DCGG571M1DeWalt 20V MAX, kit10,000 PSI, 5.0 oz/min, 42 in hoseA first powered gun for cars and trucks
Milwaukee M18 2646-20M18, bare tool10,000 PSI, 48 in hose, grease counterM18 owners and equipment
Milwaukee M12 2446-21XCM12, kitOver 8,000 PSI, 14 in long bodyTight spaces and light vehicles
Lincoln 1884 PowerLuber20V, two packs10,000 PSI, 36 in hose, 2-speedShops with no battery platform yet
Alemite 597-B20V 4.0 Ah, kitUp to 40 cartridges per charge, 18 in hoseFleets and long greasing rounds
DeWalt DCGG581GD1DeWalt 20V MAX, kit10,000 PSI, 9 oz/min, 47 in hoseHeavy equipment with large pins
Six cordless grease guns compared by battery, listed pressure or output, hose and the work each fits
tree-lined street with autumn leaves

Weight is the trade-off the table can’t show: a full-size 20V gun with a big pack tires your arm overhead, so some owners keep a compact 12V gun for the car and a larger one for equipment.

Using a Powered Gun Without Popping a Boot

A motor feeds grease faster than your hand would, so it is easy to overfill a ball joint or tie rod end and split its rubber boot. On car and light truck parts, use the slow setting or short trigger pulls and stop as soon as the boot starts to swell. Large pins on equipment can take a steady feed until fresh grease pushes out of the joint.

serene sunset over a rural landscape with a white car on a dirt road surrounded by fields

Get the vehicle up safely first: our floor jack value guide covers lifting, and always rest the weight on stands. Wipe each fitting before you couple to it, and keep a small socket kit from our mechanic tool set comparison handy for swapping a zerk that won’t accept grease.

West Michigan winters work against you in two ways. Salt spray strips grease from exposed joints, and cold grease is stiff, so a gun stored in an unheated garage may stall or need the slow speed until it warms up. Never hold a finger near the coupler or a weeping hose while the motor runs, since high-pressure grease can be injected through skin and needs emergency care.

serene unpaved road winding through a lush forest

If greasing is the part of maintenance you’d rather hand off, chassis lubrication and a look at worn joints fit naturally into factory scheduled maintenance at our Grand Rapids shop. A joint that still knocks after fresh grease is usually worn, and our suspension repair team can check it.

Frequently Asked Questions

What is the best cordless grease gun for the money?

The one that runs on batteries you already own. A bare DeWalt or Milwaukee M18 gun avoids paying for another battery and charger. With no platform yet, a kit such as the Lincoln 1884, which comes with two packs, is the simpler buy.

Which is the best cordless grease gun for heavy equipment?

Look for a high flow rate, a long hose and plenty of cartridges per charge. The DeWalt DCGG581GD1 lists up to 9 oz per minute and a 47 inch hose, the Milwaukee M18 has a 48 inch hose, and the Alemite 597-B lists up to 40 cartridges per charge.

Is a battery grease gun worth it over a manual one?

If you grease more than a handful of fittings at a time, usually yes. It saves your hand, frees one arm to hold the coupler and empties a cartridge much faster. For one car greased twice a year, a manual pistol grip gun does the job.

Can a cordless grease gun damage a ball joint boot?

Yes, if you hold the trigger too long. Powered guns deliver grease quickly, so use the low speed or short bursts on sealed car joints and stop when the boot just begins to swell.

Have a fitting that refuses grease or a front end that still clunks? Give the shop a call on 616-279-3832 between 8am and 5pm, Monday through Friday, or send a note through our contact page to set up a visit.

Working during our open hours? The after-hours drop-off lets you leave the vehicle with us at 456 Carrier St NE, Grand Rapids, MI 49505, and we’ll take it from there.