As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Tacoma bed fills up fast once the bikes, boats and camp gear come out. The best roof rack for Tacoma owners is the one built for your exact model year and cab, rated for what you carry while driving, and clear of the moonroof and antenna.
Below are six racks sorted by generation and cab. If you are still deciding where the gear should ride, our roof rack vs hitch rack comparison covers that choice first.
Quick answer
Which is the best roof rack for Tacoma trucks?
Match the rack to your generation and cab first. For a 2005 to 2023 Double Cab, the Hooke Road platform or ANTS PART crossbars fit with no drilling. For a 2024 or newer Double Cab, look at TRUMGETA crossbars or the LOX ROX platform. A YZONA bed rack keeps heavy gear off the roof.
Our Quick Picks
Three quick picks by generation and mounting style. All six racks are reviewed below.

Hooke Road Tacoma Roof Rack
Steel platform with T-slot bars that clears the sunroof and antenna.

TRUMGETA Tacoma Cross Bars
Low-profile bars for the new Tacoma, listed by grade.

YZONA Tacoma Bed Rack
Low bed rack that mounts to the factory rail system.
Know Your Tacoma Before You Shop: Year, Cab and Roof
Tacoma roof racks are sold by generation, and the split that matters is 2023 versus 2024. Second and third generation trucks (2005 to 2023) share a roof shape, while the 2024 fourth generation has a new roof, so racks for one era do not fit the other.
- Cab style: 2005 to 2023 trucks came as a four-door Double Cab or a smaller Access Cab. From 2024 the choices are the Double Cab and a two-door XtraCab, which Toyota offers on the SR, SR5 and TRD PreRunner grades.
- Mounting points: Toyota’s 2024 Tacoma announcement says the new roof has integrated attachment holes for roof rack rails on all models, with a channel sealer to keep water out.
- Moonroof and antenna: the 2024 Limited comes with a power moonroof, and some trucks carry a shark fin antenna at the back of the roof. Check that a rack clears both.
What to Check on a Tacoma Roof Rack Listing
Four details decide whether a rack works on your truck:
- Dynamic load rating: static is what the rack holds while parked, dynamic is what it carries while moving. Use the dynamic number, and never exceed the roof load limit in your owner’s manual, whichever is lower.
- Drill or no drill: many Double Cab racks bolt to existing points. Some Access Cab racks need rivet nuts in the drip rail.
- Height added: a platform can add three or four inches, so measure your garage door.
- Style of rack: crossbars suit bikes, boats and boxes. A steel platform suits tents, recovery boards and lights. A bed rack moves the load behind the cab.
If a cargo box is the plan, our guide to the best cargo carrier for SUV roofs covers box sizes and mounting, and the same rules apply to a Tacoma with crossbars.
Best Roof Rack for Tacoma: The Picks in Detail
Each pick lists its stated years and cab. Confirm your year, cab and grade on Amazon before you buy, because no single rack fits every Tacoma.
1. Hooke Road Tacoma Roof Rack: 410 lb Platform for 2005-2023 Double Cab

- Fits 2005-2023 Tacoma Double Cab only
- Up to 410 lb, evenly distributed
- Six aluminum crossbars with 8mm T-slots
- No-drill bolt-on with front wind fairing
The Hooke Road roof rack is a full platform basket built for the second and third generation Tacoma Double Cab, model years 2005 to 2023. It does not fit the Access Cab, which has its own Hooke Road version further down this list. The listing rates it for up to 410 pounds when the load is spread evenly, and it adds about 3.4 inches to the truck’s height.
The side, front and rear panels are 13-gauge steel with an E-coat and a textured black powder coat, and six extruded aluminum crossbars run across the top. Those crossbars have T-slot channels for standard 8mm bolts, so you can fix tie-downs, lights, a high-lift jack or a rooftop tent without extra brackets. A front wind fairing follows the line of the roof and windshield to cut wind noise.
Hooke Road says the rack is compatible with the sunroof and the rear antenna, and it bolts on with no drilling, using the supplied hardware and rubber trim. At about 50.5 pounds and 61.6 inches long, it is a two-person job to lift into place. If you only carry a kayak a few times a year, a pair of crossbars is lighter and quieter.
View Hooke Road Tacoma Roof Rack on Amazon
2. ANTS PART Tacoma Cross Bars: 165 lb Aluminum Bars for 2005-2023 Double Cab

- Fits 2005-2023 Double Cab, not Access Cab
- 165 lb (75 kg) load rating
- Low-profile aluminum with black powder coat
- No-drill install, hardware included
The ANTS PART cross bars are a set of two OE-style aluminum bars for the 2005 to 2023 Tacoma Double Cab, which the listing also calls the Crew Cab four-door. The Access Cab is excluded. The bars are rated for 165 pounds (75 kg), enough for a kayak, a pair of roof-mounted bikes, skis or a soft cargo bag.
The low-profile shape sits close to the roof, so the truck keeps a factory look and the bars catch less wind than a full basket. A black powder coat protects the aluminum against weather, and the kit includes all the installation hardware. No drilling is needed, which matters if you plan to sell the truck later or move the bars to another Tacoma of the same years.
Crossbars are a base, not a finished carrier. Most owners add a bike mount, kayak saddles, a ski carrier or a cargo box, so check that the accessory clamps fit the bar’s profile before you order. The 165-pound rating is well below a steel platform, so these bars are not the right choice for a rooftop tent. For light sport gear on an older Double Cab, they are a simple starting point that is easy to remove for winter.
View ANTS PART Tacoma Cross Bars on Amazon

3. TRUMGETA Tacoma Cross Bars: 260 lb Aluminum Bars for 2024-2026 Double Cab

- Fits 4th gen 2024-2026 Double Cab
- 260 lb static, 165 lb dynamic
- Aluminum and ABS with rubberized base
- No-drill, about 15-minute install
TRUMGETA built these aluminum cross bars for the fourth generation Tacoma Double Cab, model years 2024 to 2026. The listing names the SR, SR5, TRD Sport, TRD Off-Road, Limited, Trailhunter and TRD Pro grades, including the i-FORCE MAX versions. It does not fit the SR or SR5 XtraCab or the TRD PreRunner, so check your cab style first.
The rating is 260 pounds static and 165 pounds dynamic. Static is the load the bars hold while the truck is parked, and dynamic is what they can carry while you drive, which is the number that counts for a kayak or a cargo box on the highway. A thick rubberized base sits against the roof to protect the paint and damp vibration, and the shape is meant to keep wind noise down.
Installation uses the supplied hardware with no drilling, and TRUMGETA puts it at about 15 minutes. The listing also suggests a little silicone caulk in each mounting hole as an extra seal, a sensible step on a truck that sees slush and car washes all winter. The bars suit bikes, skis and boats on a new Tacoma. For a tent or heavy overland gear, a steel platform is the better fit.
View TRUMGETA Tacoma Cross Bars on Amazon
4. LOX ROX Tacoma Roof Rack: 750 lb Static Steel Platform for 4th Gen Double Cab

- Fits 4th gen Double Cab, not 2005-2023
- 750 lb static, 400 lb dynamic
- Bolts into factory roof gutter inserts
- Light bar mounts up to 40 inches
This LOX ROX platform is made for the fourth generation Tacoma Double Cab, the truck Toyota builds with attachment points along the roof. The listing title covers 2024 to 2027 trucks, it says the rack works with the TRD versions, and it states clearly that it does not fit 2005 to 2023 models. LOX ROX also notes that fitment follows the model year on the door label, not the year you bought the truck.
The frame is carbon steel with aluminum crossbars in the middle. It is rated at 750 pounds static and 400 pounds dynamic, more than the crossbar sets here, though the roof limit in your owner’s manual still applies. Assembly is required, and the rack bolts into the threaded inserts along the roof rain gutter, so no drilling is needed. Front trim and all hardware are included.
The deck has rows of holes for recovery boards, fuel cans, a shovel, an awning or a bike mount. Holes at the front and rear take a light bar up to 40 inches, which is not included. It suits a 2024 or newer Tacoma set up for camping or overlanding. If you only need to carry a kayak now and then, the TRUMGETA bars are lighter and add less drag.
View LOX ROX 4th Gen Tacoma Roof Rack on Amazon

5. Hooke Road Tacoma Access Cab Roof Rack: 330 lb Basket for 2005-2023

- Fits 2005-2023 Access Cab only
- Up to 330 lb, evenly distributed
- Four aluminum crossbars, side panel slots
- Drill-and-rivet-nut install in the drip rail
Access Cab owners have fewer roof options, because the shorter roof doesn’t take most Double Cab racks. Hooke Road makes this basket for the 2005 to 2023 Tacoma Access Cab only, and the listing says it is not compatible with a rear shark fin antenna. It is rated for up to 330 pounds evenly distributed, measures about 47.6 by 49 inches and adds about 3.8 inches of height.
Construction matches the Double Cab model: 13-gauge steel side, front and rear panels with an E-coat and powder coat, plus four extruded aluminum crossbars. Two top-facing T-slot channels take standard 8mm bolts for tie-downs and accessories. Slots in the side panels accept handles, side lights or awning mounts, and a front wind fairing helps with wind noise.
The big difference is installation. This rack requires drilling the factory drip rail and fitting rivet nuts, using an M9 drill bit, a rivet nut gun and an M6 mandrel, and the hardware and instructions are included. Seal each hole well, because bare metal in a drilled hole starts to rust once Michigan road salt reaches it. Hooke Road lists a 2-year warranty, and if you would rather not drill the roof, a bed rack is the no-drill alternative.
View Hooke Road Access Cab Roof Rack on Amazon
6. YZONA Tacoma Bed Rack: 13.3-Inch Overland Rack for 2016-2025 Trucks with Bed Rails

- Fits 2016-2025 Tacoma with bed rails
- 1,000 lb static, 500 lb dynamic
- Heavy-duty steel, adjustable width
- Two LED lights, no drilling
A bed rack is not a roof rack, but for many Tacoma owners it does the same job with fewer compromises. The YZONA rack mounts to the factory bed rail system on 2016 to 2025 Tacomas, so nothing goes on the roof and no holes are drilled. The listing says it does not fit trucks with a tonneau cover or bed cover. At 13.3 inches high, it sits low behind the cab.
The frame is heavy-duty steel plate with a textured black powder coat, rated at 1,000 pounds static and 500 pounds dynamic. Slots along the top and side panels take tie-downs and accessories such as lights, a high-lift jack, a fire extinguisher, a bike mount or a rooftop tent. The width adjusts to line up with the cab, and two LED lights come in the box.
Carrying weight in the bed rather than on the roof keeps it lower, and the bed floor stays open underneath for tools or a cooler. YZONA recommends checking the hardware for looseness before each drive, which is good practice after a few weeks of potholes. It suits third and fourth generation owners who want a tent or long boats without touching the roof. YZONA lists a 1-year warranty.
View YZONA Tacoma Bed Rack on Amazon
Matching a Rack to Your Tacoma
Narrow the list by year and cab here, then check the listing for your grade.
| Rack | Years and cab | Mounting | Suits |
|---|---|---|---|
| Hooke Road platform | 2005 to 2023 Double Cab | Bolt-on, no drilling | Tents, boards, lights |
| ANTS PART crossbars | 2005 to 2023 Double Cab | Bolt-on, no drilling | Bikes, boats, skis (165 lb) |
| TRUMGETA crossbars | 2024 to 2026 Double Cab | Bolt-on, no drilling | Sport gear (165 lb dynamic) |
| LOX ROX platform | 2024 and newer Double Cab | Roof gutter inserts | Overland gear (400 lb dynamic) |
| Hooke Road Access Cab | 2005 to 2023 Access Cab | Drill and rivet nuts | Access Cab owners |
| YZONA bed rack | 2016 to 2025 with bed rails | Bed rail system | Heavy loads, no roof work |
Have a moonroof? Open and tilt the glass once the rack is on and before you load it. The Hooke Road Double Cab listing says it clears the sunroof, and the others leave that to you to check.

Running a Rack Through a West Michigan Winter
Road salt and freeze-thaw cycles are hard on rack hardware. Re-torque the bolts after the first few weeks and again each fall, rinse salt off the feet and inserts after a slushy commute, and seal any drilled hole with care.
Brush snow and ice off a platform before you drive, the same as the roof itself, so slabs don’t slide onto the windshield or the car behind. Our winter car maintenance checklist covers the rest of the truck, and a platform is a handy place for recovery boards, though the winter car emergency kit belongs inside the cab where you can reach it.

Racks also cost fuel, because anything on the roof adds wind drag, and a tall box or loaded platform adds the most at highway speed. Take empty crossbars off for the winter if you won’t use them until spring.
When the Rack Points to a Bigger Job
A platform with a light bar or camp lights adds wiring, and a light tied straight to the battery can drain it while the truck sits. If your Tacoma turns over slowly on cold mornings after you added accessories, read our guide to a car not starting in cold weather, and have the circuit checked through our car electrical repair in Grand Rapids.

Weight up high also shows up worn shocks. If the truck wallows in corners or keeps bouncing after bumps once the rack is loaded, our suspension repair in Grand Rapids can check the shocks, springs and mounts.
More Buying Guides
Frequently Asked Questions
What is the best roof rack for Tacoma with sunroof?
Pick a rack whose listing says it clears the moonroof. The Hooke Road Double Cab platform states it is compatible with the sunroof and rear antenna. With any rack, open and tilt the glass after installing it, before you load anything.
Do I need to drill my Tacoma’s roof to fit a roof rack?
Usually not. The Double Cab racks and bars here install with no drilling, and Toyota says 2024 and newer Tacomas have integrated roof attachment holes. The Hooke Road Access Cab rack is the exception: it needs rivet nuts in the drip rail.
How much weight can a Tacoma roof rack carry?
Use the lower of two numbers: the rack’s dynamic rating and the roof load limit in your owner’s manual. A rack rated for 750 pounds while parked does not raise the limit Toyota sets for the roof while the truck is moving.
What is the best roof rack for 4th gen Tacoma trucks?
For light sport gear, the TRUMGETA cross bars fit the 2024 to 2026 Double Cab with no drilling. For heavier overland gear, the LOX ROX steel platform bolts into the roof gutter inserts. Neither fits the XtraCab, so confirm your cab and grade first.
Rack wiring or a loaded-up Tacoma not driving right in Grand Rapids? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a light bar circuit or suspension check through our contact page.
Busy all week? Strip the boats off the roof and leave the truck at 456 Carrier St NE in Creston with our after-hours drop-off and a note on which light or noise bothers you.
