As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A Highlander already seats the family, so the roof is where the camping gear, the bikes and the hockey bags end up. Finding the best roof rack for Toyota Highlander owners starts with your roof, not the bars: a 2017 XLE, a 2022 LE and a 2025 Platinum each need a different set.
Below we sort out the generations and trims, explain crossbar ratings, and review six sets. Still weighing the roof against the receiver? Our comparison of a roof rack vs a hitch rack covers the tradeoffs.
Quick answer
Which roof rack fits a Toyota Highlander?
On a 2020 to 2026 XLE, XSE, Limited or Platinum with flush side rails, the Powerty crossbars bolt to the factory points. A 2020 to 2026 L or LE with a bare roof needs a clamp kit such as HEKA’s. For 2014 to 2019 models, the KINGGERI set ships hardware for both trim groups.
Our Quick Picks
Three quick picks: bars for 2020 to 2026 flush rails, a clamp kit for the bare-roof L and LE, and a 2014 to 2019 set with hardware for both trim groups. All six sets are reviewed below.

Powerty Crossbars
Aero bars that bolt to the flush side rails.

HEKA Crossbars
Crossbars for Highlanders built without roof rails.

KINGGERI 2014-2019 Crossbars
One set with hardware for both 2014-2019 trim groups.
Which Highlander Roof Do You Have?
Highlander crossbar listings split by generation and by trim, so look at your roof first.
- 2020 to 2026, XLE and up: these trims and their hybrid versions have low flush side rails with preset mounting points.
- 2020 to 2026, L, LE and LE Hybrid: no factory rails, so you need a clamp kit that grips the door openings.
- 2014 to 2019: a different roof with its own listings, often split between the XLE, Limited and SE group and the LE and LE Plus group.
- Grand Highlander: a separate, larger vehicle with its own bars.
No single listing fits every Highlander. Confirm year, trim and roof type on Amazon before you order.
Crossbar Ratings, Roof Limits and What Goes Up Top
The sets below list between 150 and 268 pounds. That is what the bars hold, spread evenly. Toyota’s roof limit in your owner’s manual is the real ceiling, so use the lower number and subtract the bars, the box and then the gear.
There is a good reason to move hard items out of the cabin. Thule’s cargo safety page explains how loose objects inside a car turn into projectiles in a crash, even at 31 mph. A rack keeps that gear out of the passenger space, within the roof limit.
Best Roof Rack for Toyota Highlander: Six Crossbar Sets by Generation and Trim
Picks one to three fit Highlanders with factory rails, pick four is for the bare-roof L and LE, and five and six cover the 2014 to 2019 generation. Each listing states its own fit, so check it against your car.
1. Powerty Roof Rack Cross Bars: 268 lb Lockable Set for 2020-2026 Highlander Flush Rails

- Listed for 2020-2026 XLE, XSE, Limited, Platinum, Hybrid
- 268 lb even load per listing
- Tie-down loops and metal locks
- Labeled front and rear bars, soft pads
The Powerty Roof Rack Cross Bars are an aftermarket pair for the current Highlander with flush side rails. The listing names the 2020 to 2026 XLE, XSE, Limited, Platinum and hybrid versions of those trims, and it says plainly that the set does not fit the L, LE, Hybrid LE or the Grand Highlander.
Powerty rates the pair at 268 pounds evenly distributed and adds tie-down loops, which help when you are strapping a kayak, lumber or a duffel straight to the bars without a box. The bars are a streamlined wing shape in matte black aluminum, the feet lock with metal cylinders, and thick soft pads sit between the supports and the rails to protect the finish. Each bar is labeled front or rear, and spare parts are included.
This set suits owners of an XLE or higher trim who want one base for boxes, bike mounts and loose loads. It is not for a bare-roof L or LE, and the 268-pound figure is the bar rating, not Toyota’s roof limit, so check your owner’s manual. Confirm year, trim and rail style on Amazon before ordering.
View Powerty Crossbars on Amazon
2. KitsPro Lockable Roof Rack Cross Bars: 260 lb Aluminum Set for 2020-2026 Highlander

- Flush-rail fit: XLE, XSE, Limited, Platinum, Hybrid
- 130 lb per bar, 260 lb pair per listing
- Locks on all four mounting clamps
- Listed to clear the factory sunroof
The KitsPro Lockable Roof Rack Cross Bars are another pair for the 2020 to 2026 Highlander with factory flush rails. The listing covers the XLE, Hybrid XLE, XSE, Limited, Hybrid Limited, Platinum and Hybrid Platinum, and it excludes the L, LE and LE Hybrid.
Each bar is rated at 130 pounds, or 260 pounds for the pair with the load spread evenly. The bars are extruded aluminum with a matte black powder coat and composite locking clamps, and all four mounting points lock. The teardrop profile is meant to cut highway wind noise, and the listing says the bars sit high enough for the factory sunroof to open and close freely. Bar length adjusts slightly to allow for body tolerances, and the bars are labeled front and rear.
KitsPro describes a 10 to 15 minute install with no drilling, using the included tool and an illustrated guide. These suit owners who use the sunroof often and want a low, quiet bar for a cargo bag, bike rack or kayak mount. They do not fit a bare-roof trim, and the bar rating is not the vehicle roof limit. Confirm fit on Amazon first.
View KitsPro Crossbars on Amazon

3. HEKA Lockable Cross Bars: Clamp-On Roof Rack for 2020-2026 Highlander L and LE

- Listed for 2020-2026 L, LE, Hybrid LE, LE Nightshade
- For roofs without factory side rails
- Aluminum bars, ABS clamps, lockable
- Aerodynamic profile for lower wind noise
The HEKA Lockable Cross Bars solve the problem many 2020 to 2026 Highlander L and LE owners discover the first time they shop for a rack: there are no rails to bolt to. The listing names the L, LE, Hybrid LE and Hybrid LE Nightshade, all models without factory side rails, so this is a clamp-on kit rather than a rail mount.
The package holds two thickened aluminum crossbars, four ABS plastic clamps and the mounting hardware. The clamps grip the door openings and hold the bars across the roof, and the set locks. HEKA describes an aerodynamic bar shape meant to reduce wind noise at highway speed, for loads such as roof boxes, bikes and kayaks.
Clamp kits ask a little more of the owner than rail mounts. Keep the door seals and the clamp pads clean so grit does not scuff the paint, recheck the clamps after the first drive, and remove the bars before an automatic car wash if the instructions say to. This set suits L and LE owners who want a rack without adding factory rails. It does not fit XLE and higher trims, so confirm year and trim on Amazon, and use the roof limit in your owner’s manual.
4. Toyota Genuine PT278-48170 Roof Rack Cross Bar Set: OEM Bars for 2014-2019 Highlander

- Genuine Toyota part PT278-48170
- Listed for 2014-2019 XLE, Limited and SE
- Set of 2 black cross bars
- Vehicle specific OEM part
The Toyota Genuine Roof Rack Cross Bar Set, part number PT278-48170, is the factory pair of black crossbars for the third-generation Highlander. The listing names the 2014 to 2019 XLE, Limited and SE trims, and describes the set as vehicle specific and OEM rather than aftermarket. It comes with a manufacturer warranty, according to the listing.
This set makes the most sense when the original bars on a used Highlander were lost, bent or swapped out by a previous owner, or when you simply want the bars Toyota designed for that roof. Factory bars match the rails and the original mounting points. The listing gives few technical details, so use the Toyota part number to check the fit notes and any load figure with a Toyota parts counter or the owner’s manual.
These bars suit XLE, Limited and SE owners who want a genuine replacement and do not need extras such as tie-down loops. They are not listed for the LE or LE Plus, and they do not fit any 2020 or newer Highlander. Confirm year and trim on Amazon before ordering, and stay within the roof limit in your manual.
View Toyota PT278-48170 Crossbars on Amazon

5. KINGGERI Roof Rack Cross Bars: 220 lb Lockable Set for 2014-2019 Highlander

- Listed for 2014-2019 XLE, Limited, SE, LE, LE Plus
- Two hardware kits for the two trim groups
- 220 lb max load per listing
- Metal locks, stainless screws, spare parts
The KINGGERI Roof Rack Cross Bars for the 2014 to 2019 Highlander stand out for one practical reason: the box holds two accessory packages. One is for the XLE, Limited and Limited Platinum, and the other for the LE and LE Plus, so the same set covers both trim groups of that generation. That helps if you are unsure which hardware a used Highlander needs.
The brackets are die-cast aluminum and the bars are 2.1 mm thick aluminum with a matte black powder coat and stainless screws. KINGGERI lists a maximum load of 220 pounds, and the metal lock cylinders are there to deter theft of the bars and whatever is mounted to them. Each piece is labeled with its position, the set mounts to the preset holes in the side rails with no drilling, and a spare screw and washer are included.
This set suits third-generation owners who want lockable bars for a box, bikes or skis without hunting for the right trim-specific listing. It does not fit 2020 and newer Highlanders. The 220-pound figure is the bar rating, so use the roof limit in your owner’s manual, and confirm year and trim on Amazon before you buy.
View KINGGERI 2014-2019 Crossbars on Amazon
6. BRIGHTLINES Roof Rack Crossbars: 150 lb Aero Set for 2014-2019 Highlander LE and LE Plus

- Listed for 2014-2019 LE, LE Plus and Hybrid LE
- 150 lb evenly distributed per listing
- Bolts to the preset side rail points
- Pair of bars with four mounting towers
The BRIGHTLINES Roof Racks are a replacement crossbar pair for the 2014 to 2019 Highlander LE, LE Plus and Hybrid LE. The listing describes a set that bolts directly to the side rails at the preset points, so there is no drilling or modification. The package includes the two crossbars, four mounting towers and assembly instructions.
The bars are high-grade aluminum with an aerodynamic shape intended to keep wind noise down on the highway. BRIGHTLINES lists the load capacity at 150 pounds evenly distributed, which is lower than the other sets here. That is not a flaw for many families: a soft cargo bag, a pair of ski carriers or a couple of lighter bikes fits within it.
This set suits LE and LE Plus owners who want a straightforward, low-profile pair for light, occasional loads. It is the wrong choice if you plan to carry a large loaded hard box, several heavy bikes or a kayak with gear, and it is not listed for the XLE, Limited, SE or any 2020 and newer Highlander. Confirm year and trim on Amazon, and check the roof limit in your owner’s manual before loading.
View BRIGHTLINES Crossbars on Amazon
Matching the Bars to Your Highlander
Start with the year and trim, then what rides on top.
| Your Highlander | Roof type | What to look for | Pick |
|---|---|---|---|
| 2020 to 2026 XLE, XSE, Limited, Platinum | Flush side rails | Tie-down loops, locks | Powerty crossbars |
| 2020 to 2026 with a sunroof | Flush side rails | Sunroof clearance, quick fit | KitsPro crossbars |
| 2020 to 2026 L, LE, LE Hybrid | Bare roof | Clamp kit, clean door seals | HEKA crossbars |
| 2014 to 2019 XLE, Limited, SE | Factory rails with bar points | Toyota part number | Toyota PT278-48170 or KINGGERI |
| 2014 to 2019 LE, LE Plus | Rails with preset points | Light loads, low profile | BRIGHTLINES or KINGGERI |
Measure the spread between the bars first: many boxes need a minimum gap, and the liftgate must still open fully. If a box is next, our guide to the best cargo carrier for SUV roofs and hitches lists sizes that suit a three-row SUV.

Our roundup of rooftop cargo carriers compares soft bags with hard boxes. Keep heavy items centered between the bars and recheck straps after a few miles.
Salt, Ice and a Rack That Stays On All Winter
Plenty of Highlanders around Grand Rapids keep their bars on all winter. Road salt packs into clamp threads and key cylinders, and freeze-thaw nights can seize a lock.
- Rinse the bars after salty drives and check the bolts monthly.
- Put a little lock lubricant in each cylinder before the first hard freeze.
- On clamp kits, wipe grit off the door seals and pads.
- Clear snow off the bars and box lid before you drive.

Add the rack to your fall prep on our Michigan winter car maintenance checklist. A roof box on a long drive north is also a sensible home for a winter car emergency kit. And if the Highlander turns over slowly in a frozen ski lot, our article on a car not starting in cold weather explains what to check first.
When to Have a Shop Look
Fitting crossbars is a driveway job for most owners, but a loaded roof raises the center of gravity. Tired struts then show up as extra body roll and a floaty highway feel, and a clunk over potholes deserves a look.

Our suspension repair in Grand Rapids covers struts, sway bar links and mounts on SUVs like the Highlander. A hum that grows with speed after a summer of heavy loads can point to a worn hub, and we handle wheel bearing replacement too.
More Buying Guides
Frequently Asked Questions
My Highlander LE has no roof rails. Can I still add a rack?
Yes. A clamp-style kit such as the HEKA set, listed for 2020 to 2026 L, LE and LE Hybrid models, grips the door openings instead of rails. Keep the door seals clean and recheck the clamps after the first drive.
What is the best roof rack for Toyota Highlander models from 2014 to 2019?
For factory-matched bars on an XLE, Limited or SE, the Toyota PT278-48170 set is the genuine part. The KINGGERI 2014 to 2019 set includes hardware for both the XLE group and the LE group, so it covers more trims.
Do Highlander crossbars fit the Grand Highlander?
No. The Grand Highlander has its own roof and its own listings, and the 2020 to 2026 Highlander sets here say they do not fit it. Shop by the exact model name on your registration.
How much weight can I put on my Highlander’s roof?
Use the roof load limit in your owner’s manual, not the crossbar rating, and go by whichever is lower. Subtract the weight of the bars and any box or basket, and what is left is what your gear can weigh.
Noticing more sway or a new clunk since the Highlander started carrying a loaded roof? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or book a suspension check for your Highlander through our contact page.
Rolling back into town after the shop has closed? Pull the Highlander into our after-hours drop-off at 456 Carrier St NE in Creston, and tape a note to the dash saying whether the noise comes with the rack loaded or empty.
