456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

MOOG, Mevotech or Lemforder? The Best Control Arm Brands for Your Car

best control arm brands: mechanic sorting parts on a cluttered workbench

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A clunk over every bump, a car that wanders on the highway or a tire wearing on one edge often traces back to a tired control arm. The best control arm brands are the ones that build to the original geometry, ship the arm with fresh bushings and ball joint, and stand up to a salted road.

This hub covers what to look for, how to order the right arm for your car and six OE-style brands with one common listing each. If you are still working out where the noise comes from, start with our guide to a clunking noise over bumps.

Quick answer

Which control arm brand should you buy?

For most daily drivers, a complete arm and ball joint assembly from MOOG, Mevotech or Dorman is a sound choice. Delphi and TRW suit owners who want an OE-style part, and Lemforder is the original-equipment supplier on many European models. Match the exact position, side and OE number, then get an alignment.

Our Quick Picks

Three quick picks: a truck arm from MOOG, a commuter arm from Mevotech and an OE-quality European arm from Lemforder. All six listings are reviewed below.

MOOG RK80403 product photo
Truck pick

MOOG RK80403

Front left lower · F-150

A complete lower arm for one of the most common pickups on the road.

SuitsF-150 owners with a worn front lower arm
View on Amazon →
Mevotech CMS861301 product photo
Commuter pick

Mevotech CMS861301

Front left lower · Camry

A greaseable arm for a popular sedan that racks up highway miles.

SuitsHigh-mileage Camry drivers
View on Amazon →
Lemforder 39368 01 product photo
European pick

Lemforder 39368 01

Front left upper · GLC X253

An original-equipment quality arm for a popular Mercedes SUV.

SuitsMercedes and other European owners
View on Amazon →

What Separates a Good Control Arm From a Cheap One

A control arm looks like a simple bracket, but MOOG describes it as three parts working together: the arm body, a ball joint at the wheel end and bushings where it bolts to the frame. Its job is to let the wheel move up and down while holding it in the right place. When any of those three parts wears, the whole corner loses its precision.

  • Complete assembly: an arm sold with the ball joint and bushings already pressed in saves shop time and avoids reusing a worn joint.
  • Bushing quality: the rubber should match the original size and stiffness. A bushing that is too soft lets the wheel shift under braking, and one that is too hard sends more noise into the cabin.
  • Ball joint design: some joints have a grease fitting so you can flush out dirt and water, while sealed joints are lubricated for life.
  • Body material: stamped steel, cast aluminum or forged arms are not interchangeable. Buy the same material your car came with unless the maker lists an approved upgrade.
  • Coating: a protective finish matters on a car that sees road salt five months a year.

Ordering the Right Arm for Your Vehicle

Control arms are among the most vehicle-specific parts you can buy. The same model year can use different arms for two-wheel drive and four-wheel drive, for different engines or for steel and aluminum suspension. Even the best control arm brands build a separate part for each version, so each listing below shows one common application only.

Before you order, confirm year, model, engine, trim, drivetrain, front or rear, upper or lower, and driver or passenger side with the Amazon fit checker. Comparing the OE number stamped on your old arm, or printed in the listing, is the surest cross-check. Many shops replace arms in left and right pairs so the car sits and steers evenly.

Best Control Arm Brands: Six Listings Reviewed

Every product below is a specific listing on Amazon US from a brand that builds replacement arms to original-equipment dimensions. Read the application each one names, then use the brand’s catalog on Amazon to find the matching part for your own car.

1. MOOG RK80403: Front Left Lower Control Arm and Ball Joint Assembly for Ford F-150

MOOG RK80403 product photo
Key features
  • Front left lower arm with ball joint
  • Listed for 2004-2008 Ford F-150
  • Also lists 2006-2008 Lincoln Mark LT
  • Built to hold factory alignment geometry

MOOG is a long-established name in replacement steering and suspension parts, and the RK80403 is a typical example of how the brand sells control arms. It is a front left lower arm supplied as a complete assembly with the ball joint already fitted. The listing names 2004 through 2008 Ford F-150 trucks and the 2006 to 2008 Lincoln Mark LT as its applications.

The listing describes the arm as a key suspension part that helps keep the wheel alignment correct and the truck stable, and says it is built to handle the stress of everyday driving. Buying the arm with its joint already pressed in means there is no separate ball joint to install, which can save a lot of time on a truck that has spent years on salted roads.

F-150 front suspension varies with drivetrain and build date, so check that your truck matches this part before you order. Use the Amazon fit checker with your year, cab, drivetrain and trim, and order the matching right side arm if you plan to do both corners. MOOG makes more than one tier of control arm, so compare the RK listing with any other MOOG number shown for the same position.

View MOOG RK80403 on Amazon

2. Mevotech CMS861301: Front Left Lower Control Arm and Ball Joint for 2018-2024 Toyota Camry

Mevotech CMS861301 product photo
Key features
  • Front left lower arm with ball joint
  • Listed for 2018-2024 Toyota Camry
  • Sintered bearing and grease fitting
  • Double-bonded bushings, corrosion coating

Mevotech is a chassis parts maker with several product tiers, and this Professional Grade arm is listed for the 2018 to 2024 Toyota Camry. The CMS861301 is the front left lower control arm, sold as an assembly with the ball joint in place. That makes it a direct swap for the original arm rather than a repair of the old one.

The listing highlights a sintered bearing inside the ball joint for longer life and a 180 degree SAE grease fitting so the joint can be serviced. It also mentions bushings that are double bonded for added stiffness and durability, and a protective surface treatment to slow rust. On a car that sees Michigan winters, the grease fitting is useful because fresh grease pushes out water and dirt during routine service.

Like any lower arm, this one is specific to its side and platform. Confirm your model year, engine and trim in the Amazon fit checker, and look at the matching right side part if both arms are worn. Mevotech sells other grades too, so you may see more than one Mevotech number for the same Camry; the listing details show which features each one includes.

View Mevotech CMS861301 on Amazon

Workshop with a bench, stool and floor jack

3. Dorman 520-493: Front Driver Side Lower Control Arm and Ball Joint Assembly

Dorman 520-493 product photo
Key features
  • Front driver side lower arm
  • Ball joint and bushings pre-installed
  • Coatings for rust and corrosion resistance
  • Select Ford, Mazda and Mercury models

Dorman is a large aftermarket brand that covers many parts other suppliers skip, including control arms for older and less common vehicles. The 520-493 is a front driver side lower arm for select Ford, Mazda and Mercury models. The listing says it directly replaces the original assembly on its specific applications.

Each assembly comes with the ball joint and bushings already installed, so the arm goes in as one unit. Dorman says the design went through testing for a smooth, stable ride, and that extra coatings help it resist rust and corrosion. For a high-mileage car where the original arm, joint and bushings are all tired, replacing the full assembly usually makes more sense than pressing in a new joint or new bushings by hand.

The listing does not name every vehicle in its title, so fit checking matters more than usual here. Enter your make, model, year and trim into the Amazon garage tool, as Dorman itself advises, and compare the part number with your old arm if you can read it. Order the passenger side arm separately, as a different part number, if you want a matched pair.

View Dorman 520-493 on Amazon

4. Delphi TC5184: Suspension Control Arm with OE-Grade Inspection and Machined Ball Stud

Delphi TC5184 product photo
Key features
  • Replaces Honda OE 51350-SHJ-A01
  • 100% crack and ultrasonic flaw detection
  • Robot-welded construction
  • Ball studs machined to tight tolerances

Delphi has a long history as an original-equipment supplier, and its aftermarket arms are sold as OE-grade replacements. The TC5184 is a single control arm, and its listing names Honda part 51350-SHJ-A01 among the numbers it replaces, along with cross-references to other brands’ parts. That makes it a practical option if you prefer to shop by OE number.

Delphi says each control arm goes through crack detection and ultrasonic flaw detection to make sure the material matches OE specifications. The arms are robot welded for consistency, and the ball studs are machined to tight tolerances for smooth joint movement. A protective finish is applied to each part to help it resist surface corrosion. These checks focus on the hidden quality of the metal and welds, which is hard for a buyer to judge from a photo.

The listing does not spell out vehicle years in the title, so confirm the application with the Amazon fit checker and compare the OE number on your old part. The listing also notes that arms bought on Amazon are covered by the seller rather than Delphi’s own warranty, so read the seller’s terms before ordering.

View Delphi TC5184 on Amazon

Hand wiping a camshaft with a rag

5. Lemforder 39368 01: Front Left Upper Track Control Arm for Mercedes-Benz GLC (X253)

Lemforder 39368 01 product photo
Key features
  • Front left upper control arm
  • Listed for Mercedes-Benz GLC (X253)
  • Replaces OE A 205 330 55 01
  • German original-equipment quality

Lemforder is a German chassis brand from ZF, and it is the name many European car owners look for when they want an arm made to the original design. The 39368 01 is a front left upper track control arm listed for the Mercedes-Benz GLC on the X253 platform from 2015 onward. The listing gives the Mercedes OE numbers A 205 330 55 01 and 205 330 55 01.

The listing describes the arm as made to German original-equipment quality, with accurate wheel guidance and vibration damping for a more comfortable ride. European multi-link suspensions spread the work across several arms, so each one has to be precise. A worn upper arm can show up as a clunk, vague steering or tires wearing on the inner edge.

Mercedes uses different arms across body styles, drivetrains and suspension types, even within one model line. Use the Confirmed Fit option on Amazon, check the OE number against your old arm, and confirm whether your car needs a front upper or lower part. Lemforder makes arms for many other European brands too, so search its catalog by the OE number printed on your part.

View Lemforder 39368 01 on Amazon

6. TRW JTC2471: Front Right Lower Aluminum Control Arm for 2007-2013 Nissan Altima

TRW JTC2471 product photo
Key features
  • Front right lower control arm
  • Listed for 2007-2013 Nissan Altima
  • Lightweight aluminum construction
  • Endurance tested to 500,000 cycles

TRW is another ZF brand with a long record in steering and suspension, and the JTC2471 shows its approach to import applications. This is the front right lower control arm listed for the 2007 to 2013 Nissan Altima. It is made of aluminum, which keeps unsprung weight down, and TRW presents it as following an advanced OE design.

TRW says every part goes through four levels of testing and technical review before approval, including endurance testing to 500,000 cycles. The listing also says the design aims to support driving comfort and safety. Aluminum arms do not rust the way bare steel does, but road salt can still attack the bushings and the steel hardware, so a winter rinse helps here too. A torn bushing on an aluminum arm usually means replacing the whole arm.

Because this arm is aluminum, it should only replace an aluminum arm of the same design, never a steel one. Check your Altima’s year, engine and body style with the Confirmed Fit option, and order the left side part, JTC2472, if both sides need attention. A front-end alignment should follow the job, as it does with any control arm replacement.

View TRW JTC2471 on Amazon

How the Six Brands Compare

The table sorts the brands by the kind of owner and car they suit. Use it to narrow the field, then check the part number for your vehicle.

BrandExample listingStrengthGood fit for
MOOGRK80403, Ford F-150Wide truck and domestic coveragePickups and family cars driven hard
MevotechCMS861301, Toyota CamryGreaseable joint, corrosion coatingHigh-mileage commuters
Dorman520-493, Ford/Mazda/MercuryBroad catalog of complete assembliesOlder cars and budget repairs
DelphiTC5184, Honda OE numberCrack and flaw inspection on every armOwners who want an OE-style part
Lemforder39368 01, Mercedes GLCGerman original-equipment qualityEuropean cars
TRWJTC2471, Nissan AltimaAluminum arm, endurance testedImports with aluminum suspension
How the best control arm brands in this guide line up by strength and typical owner.

If the same corner also needs struts, doing both jobs together saves a second alignment. Our roundup of shocks and struts for daily drivers covers OE-style dampers from several of the same makers.

Wrenches laid out on asphalt, black and white

Salt, Potholes and Control Arm Life in West Michigan

MOOG lists two main causes of control arm damage besides normal wear: sudden impacts from potholes and curbs, and corrosion from road salt. A West Michigan spring delivers plenty of both. Freeze-thaw cycles open new potholes every week, and salty slush sits on bushings and ball joint boots for months.

Rinsing the underside during winter and checking the boots for tears at each oil change helps. MOOG’s own page on the signs of a failing control arm lists the symptoms to watch: front-end clunks, wandering, uneven tire wear, steering wheel vibration and a harsher ride. After a hard hit, our list of pothole damage signs helps you decide whether the car needs a look.

Slushy road with snowbanks

Audi owners see a few model-specific patterns, especially on cars with multi-link front suspension. Our guide to Audi control arm failure symptoms explains what to listen for on those cars.

Fitting a Control Arm: Driveway Job or Shop Visit?

On many cars a lower arm is a bolt-in job with basic hand tools, a jack and stands. In a salt-belt state, though, the frame bolts are often seized into the bushing sleeves and may need heat or cutting. The car also needs a wheel alignment afterward, because a new arm changes camber and toe even when it matches the original.

A worn ball joint can let the wheel separate from the arm, so a loose joint is not something to drive on for long. Our article on bad ball joint symptoms covers the warning signs.

Hand reaching into an engine bay with a wrench

If you would rather have it done for you, our suspension and steering repair in Grand Rapids covers control arms, ball joints and bushings. Hendrick Hoffman is ASE and State of Michigan certified in steering and suspension.

Frequently Asked Questions

What is the difference between MOOG RK and CK control arms?

They are separate MOOG product lines, and both can exist for the same position on one vehicle. The features differ by part, such as whether the ball joint has a grease fitting, so compare the two listings for your car side by side before you choose.

Should I replace control arms in pairs?

It is not always required, but it is common practice. If one side has worn out, the other has the same mileage and salt exposure, and matching arms help the car sit and steer evenly.

Do I need an alignment after replacing a control arm?

Yes. A new arm moves the wheel slightly, even when it matches the original, so camber and toe should be checked and set. Skipping it can wear a new set of tires quickly.

Which of the best control arm brands suits European cars?

Lemforder supplies original equipment to many German makers, and TRW comes from the same parent company, ZF. Both list European applications. Always match the OE number and confirm fit for your exact chassis.

Hearing a clunk from the front end around Grand Rapids? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or schedule a suspension inspection through our contact page.

Can’t make it during the day? Use our after-hours drop-off. We’re at 456 Carrier St NE in Creston.