As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A dull knock from the front of an A4 when you roll over a manhole cover, or a creak as you turn into a driveway, is often the first sign of tired arms. The best control arms for Audi A4 sedans and Avants keep the factory geometry, carry a solid ball joint and are built to the exact OE number your car was assembled with.
This page narrows our wider guide to control arm brands across makes and models down to one car. It walks through how the A4 front axle is built, when a full kit beats a single arm and six specific listings for the B7, B8 and B9 generations.
Quick answer
What control arms should go on an Audi A4?
For a B9, a Lemforder arm built to the Audi part number or a MOOG kit is a sound choice. A high-mileage B8 quattro suits a complete febi bilstein front kit, and a B7 suits the Meyle HD set. Match generation, drivetrain, side and position, then book an alignment.
Our Quick Picks
Three quick picks: a Lemforder lower arm for the B9, a complete febi bilstein front kit for the B8 quattro and the Meyle HD set for the B7. All six listings are reviewed below.

Lemforder 39610 01
A lower forward arm built to the Audi 8W0 407 151 part numbers.

febi bilstein 49419
Arms, joints, sway bar links and tie rod ends in one box.

Meyle 116 050 0085/HD
Meyle's HD front arm set for the 2005 to 2008 A4.
Eight Arms Up Front: How the A4 Is Built
Most cars hang each front wheel from a single lower arm. The A4 uses a multi-link layout instead, with four arms on each side. Two short upper arms sit high in the wheel well, one forward and one rearward, and each carries its own small ball joint.
Below them sit a straight lower forward arm and a curved lower rearward arm, sometimes called the guide or track arm. The eight arms locate the wheel precisely, but they also mean many more bushings and joints to wear.
The generations differ more than they look. The B7 (2005 to 2008 in the US), the B8 (2009 to 2016) and the B9 (2017 on) each use their own arms, and the B8 changed ball joint thread size partway through its run.
One Worn Arm or the Whole Front Kit
If a shop has found play in one specific joint and the car has modest mileage, a single arm built to the OE number is a tidy repair. The upper arms usually go first, because their small ball joints carry a lot of load for their size.
On a high-mileage car, the other arms are rarely far behind. A complete kit replaces every arm on both sides in one visit and pays for one alignment instead of several. Some kits add sway bar links or tie rod ends, so read the contents list.
Best Control Arms for Audi A4: Six Listings by Generation
Each pick below is a specific Amazon US listing for a named A4 generation and position. Confirm your year, body style, engine and drivetrain in the Amazon fit checker before you order.
1. Lemforder 39610 01: Front Left Lower Control Arm for Audi A4 B9 (8W)

- Listed for Audi A4 B9 (8W2, 8WC)
- Front axle, left side, lower position
- OE numbers 8W0 407 151 A and 8W0 407 151 C
- Made to German OE quality, per the listing
Lemforder is the chassis parts brand of the German supplier ZF, and the 39610 01 is a single front lower arm for the Audi A4 B9, listed for the 8W2 sedan and 8WC Avant body codes. The listing dates the fit from 2015, the year the B9 launched in Europe, which covers the 2017 and later A4 sold in the US. It is the left side arm in the lower forward position, the straight arm that runs from the subframe out to the knuckle.
The listing gives OE numbers 8W0 407 151 A, 8W0 407 151 C and 8WD 407 151, which makes it easy to compare against the part already on your car or the number in a parts catalog. Lemforder describes the arm as manufactured to German original equipment quality, with accurate wheel guidance and vibration damping that it says improves driving comfort. Because it is a single arm, you can fix the one corner that has a torn bushing without paying for a full kit.
This is a left side part only, so order the matching right side arm separately if you want both lowers renewed together. It will not fit a B8 or B7. Confirm year, body style and drivetrain in Amazon’s fit checker, tighten the bushing at ride height and book an alignment afterward.
View Lemforder 39610 01 on Amazon
2. Lemforder 39314 01: Front Left Upper Rear Control Arm for Audi A4 B9 (8W)

- Listed for Audi A4 B9 (8W2, 8WC)
- Front axle, left side, upper rear position
- OE numbers 8W0 407 509 A, B and E
- Made to German OE quality, per the listing
The upper arms on an A4 are short links that sit high inside the wheel well, and each one carries a small ball joint that takes a surprising share of the load. The Lemforder 39314 01 is the left side upper rear arm for the A4 B9, listed for the 8W2 sedan and 8WC Avant body codes from 2015 on. In the US that generation starts with the 2017 model year.
The listing names OE numbers 8W0 407 509 A, 8W0 407 509 B, 8W0 407 509 E and 8WD 407 509, so you can check it against the arm on your car before ordering. Like the lower arm above, Lemforder lists it as made to German OE quality, with precise wheel guidance and vibration damping. When an upper joint loosens, the usual symptoms are a knock over sharp bumps and a vague feel on center, and replacing just that arm restores the joint and the bushing in one part.
Each side has an upper forward arm and an upper rear arm, and this listing covers only the left rear one. Many owners renew all four uppers at once when the mileage is high, so price that up before you decide. Confirm fit with Amazon’s fit checker and plan an alignment once the arm is installed.
View Lemforder 39314 01 on Amazon

3. MOOG VK01584: 2 Pc Control Arm and Ball Joint Kit for Audi A4 B9

- Fits 2017-2020 A4 and 2017-2023 A4 Quattro
- Also listed for 2017-2023 A4 allroad
- Two control arm and ball joint assemblies
- MOOG parts in one matched kit
MOOG is a long-running North American steering and suspension brand, and the VK01584 groups two of its control arm and ball joint assemblies into one kit for the B9 platform. The listing names the 2017 to 2020 Audi A4, the 2017 to 2023 A4 Quattro and the 2017 to 2023 A4 allroad, along with several A5, S4, S5 and RS5 versions built on the same platform.
Buying the arms as a pair means both sides of the car get new joints and bushings at the same time, which helps the A4 track straight and brake evenly. MOOG says the kit is designed to remove the guesswork of finding compatible parts, with precision tolerances for installation and alignment. The title does not spell out which of the four arm positions the two assemblies cover, so open the product details and qualifier notes on Amazon to see exactly what is in the box.
That gap matters on a car with eight front arms, because you need to know whether the kit matches the worn position your mechanic found. MOOG’s own instructions on the listing say to enter year, make, model, engine and trim before buying. Once the arms are fitted, an alignment is needed to bring toe and camber back into specification.
4. febi bilstein 49419: Front Control Arm Kit with Links and Tie Rod Ends for Audi A4 Quattro B8

- Listed for Audi A4 quattro (8K)
- Front axle, both sides
- Includes joints, stabiliser links and tie rod ends
- OE reference 8K0 407 151 D S3
febi bilstein is a German parts brand with a long catalog for European cars, and the 49419 is a complete front axle kit for both sides of the car. The listing names the Audi A4 quattro on the 8K platform, which is the B8 generation sold in the US from 2009 to 2016, plus the A5, Q5 and S5 quattro models that share it. The OE reference given is Audi 8K0 407 151 D S3, which is Audi’s own kit number.
According to the listing, the kit includes control arms with their joints, stabiliser links, tie rod ends and additional parts, and the package weighs 12.88 kg. Renewing every arm at once suits an A4 with high mileage, where the remaining original arms are usually close behind the one that started clunking. It also means one alignment for the whole job, instead of returning to the rack after each separate repair.
The listing names the quattro versions, so a front-wheel drive A4 owner should confirm fit carefully. B8 cars also changed ball joint thread size partway through production, which is another reason to check the part number. Use Amazon’s vehicle identification, observe the restrictions the listing mentions and plan for a full alignment afterward.
View febi bilstein 49419 on Amazon

5. TRW JTC2106: Front Left Lower Forward Aluminum Control Arm for Audi A4 B8

- Fits A4 2009-2012 and 2014, A4 Quattro 2009-2012
- Front left lower forward position
- Aluminum construction
- Endurance testing of 500K cycles, per TRW
TRW is a ZF brand with a long history as an original equipment supplier, and the JTC2106 is a single front left lower forward arm for the B8 A4. The listing names the Audi A4 for 2009 to 2012 and 2014 and the A4 Quattro for 2009 to 2012, along with A5, Q5, S4 and S5 versions of the same years. It sits in the straight lower forward position, which takes braking loads as the car slows.
TRW says every part goes through four levels of testing, technical and audit review before approval, including endurance testing of 500,000 cycles. The arm is made from aluminum to keep the suspension light, as the original arm is. For an A4 with one torn lower bushing and otherwise healthy arms, a single part like this keeps the repair focused on the actual fault.
The listing calls out gaps in its year range, so a 2013 or 2015 to 2016 A4 owner should not assume it fits. It is the left side only, so the right side needs its own part number. Use the Confirmed Fit option on Amazon, tighten the bushing at ride height and get an alignment afterward.
6. Meyle 116 050 0085/HD: Front Control Arm Set for Audi A4 B7 Sedan and Avant

- Listed for A4 B7 (8EC) and B7 Avant (8ED)
- Production dates 11/04 to 06/08
- Meyle HD heavy-duty line
- Complete front control arm set
Meyle is a Hamburg-based parts maker, and its HD line is the range it re-engineers for heavier duty than the original parts. The 116 050 0085/HD is a front control arm set for the Audi A4 B7, listed for the 8EC sedan and 8ED Avant built from November 2004 to June 2008. In the US that covers the 2005 to 2008 model years, and the listing also names the SEAT Exeo, which shares the platform.
A complete set replaces the arms on both sides of a car that is now well into its second decade, when bushings and joints are usually tired across the board. Meyle’s own site describes the HD line as technically optimized parts with a four-year guarantee, so check how those terms apply to a US purchase. The listing itself describes the parts as made from durable materials for consistent performance.
This set suits only the B7, so it will not fit a B6, B8 or B9 even though the arms look similar. A B7 that has been through many salted Michigan winters may have seized bolts, which adds time to the job. Confirm fit in Amazon’s fit checker, and plan for a full alignment once the new arms are in.
View Meyle 116 050 0085/HD on Amazon
Matching a Listing to Your A4
Generations and positions are shown as each listing names them.
| Listing | A4 named | Position | Suits |
|---|---|---|---|
| Lemforder 39610 01 | B9 (8W2, 8WC) | Front left lower forward | One worn lower arm on a B9 |
| Lemforder 39314 01 | B9 (8W2, 8WC) | Front left upper rear | A B9 with a loose upper joint |
| MOOG VK01584 | 2017-2020 A4, 2017-2023 A4 Quattro | 2 pc kit, see listing | Paired B9 arm replacement |
| febi bilstein 49419 | A4 quattro B8 (8K) | Full front kit, both sides | High-mileage B8 quattro |
| TRW JTC2106 | A4 2009-2012 and 2014, A4 Quattro 2009-2012 | Front left lower forward | B8 single-arm repair |
| Meyle 116 050 0085/HD | B7 (8EC) and B7 Avant (8ED) | Front set | Complete refresh on a B7 |

Grand Rapids Winters and A4 Front Ends
Every spring the freeze and thaw cycle opens fresh potholes across Grand Rapids, and a low-profile tire on an A4 passes much of that hit straight into the upper arms. Salt then attacks the rubber boots, and a split boot lets grit into the ball joint.
Arms are rarely the only tired part. Worn struts let the wheel move further and faster, which loads every bushing harder,, so check them too. Our guide to shocks and struts for daily drivers explains what to look for.

If you are not sure the arms are the problem, our article on Audi control arm failure symptoms walks through the noises and tire wear patterns that point to each arm. Meyle also explains what sets its HD product line apart from its standard parts.
Doing It Yourself or Booking the Job
Swapping the arms is within reach of a patient home mechanic with a good torque wrench and a ball joint separator. Pinch bolts can seize after a few Michigan winters, so soak them in penetrant a day ahead. Lower arm bushings are typically tightened with the car at ride height, so follow the repair manual rather than torquing them with the wheel hanging.
Even the best control arms for Audi A4 models change the alignment slightly once they are in, so plan on a full alignment afterward. Skipping it can leave a new tire wearing unevenly on one edge.

Prefer to hand it off? Our suspension repair service in Grand Rapids covers control arms, ball joints and bushings on foreign and domestic cars. Hendrick Hoffman, our owner and head mechanic, is Audi factory trained and has spent eight years focused on Audi and other foreign cars.
More Buying Guides
Frequently Asked Questions
Which A4 control arm usually wears out first?
On the B7 and B8, the upper arms are the usual first failure, because their small ball joints carry a lot of load.
Do B8 and B9 A4 control arms interchange?
No. The B8 uses arms with 8K part numbers and the B9 uses 8W part numbers, and they are not swappable. Early and late B8 cars also differ in ball joint thread size, so check the part number on the car.
Should I replace A4 control arms in pairs or as a kit?
Replacing the same arm on both sides keeps the car tracking evenly. On a high-mileage A4, a full front kit often makes more sense, with one alignment covering everything.
Will one listing fit every Audi A4?
No. Arms change between generations, sides, positions and sometimes between front-wheel drive and quattro. Use the part number and the Amazon fit checker for your exact year, body style, engine and drivetrain.
Hearing a knock from the front of your A4 on Grand Rapids roads? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a front suspension check through our contact page.
Tied up at work until evening? Bring the Audi to our shop at 456 Carrier St NE, Grand Rapids, and leave it with the after-hours drop-off.
