456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Towing, Plowing, Hauling: Choosing the Best Brake Pads for Trucks

best brake pads for trucks: dump truck on a long desert road

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A three-quarter-ton pickup with a camper or a plow on the front asks far more of its brakes than any sedan. The best brake pads for trucks are built for that heat and weight, and they come in sets matched to one axle of one truck, not to “trucks” in general.

Every listing below fits one heavy-duty reference truck, the 2013 to 2022 Ford F-250 and F-350 Super Duty. Each part number is an example: the pad line is the recommendation, sold for other trucks under other numbers. If you drive a car or crossover instead, our guide to brake pads for daily driving is the better starting point.

Quick answer

Which brake pads suit a truck that tows or hauls?

Pick a truck or severe-duty line listed for your exact year, model and axle. PowerStop Z36 is a quieter carbon-fiber ceramic choice for regular towing. Semi-metallic lines such as Bosch Blue, Bendix Fleet MetLok and Wagner SevereDuty handle heavy, frequent stops. Rear pads are sold separately, so check both axles.

Our Quick Picks

Three starting points for a heavy-duty pickup: a quieter towing pad, a semi-metallic everyday set and a rear set built for salt and load.

PowerStop Z36-1680 product photo
Towing all-rounder

PowerStop Z36-1680

Carbon-fiber ceramic, front

A truck and tow pad that keeps dust and noise down.

SuitsTrucks that tow most weekends
View on Amazon →
Bosch Blue BE1680H product photo
Everyday heavy duty

Bosch Blue BE1680H

Semi-metallic, front

A semi-metallic set with shims, clips and lube included.

SuitsMixed hauling and daily use
View on Amazon →
Raybestos Specialty SP1691TRH product photo
Salt-belt rear

Raybestos Specialty SP1691TRH

Truck and medium duty, rear

A rear pad with mechanical retention to resist rust lifting.

SuitsTrucks on salted winter roads
View on Amazon →

What Makes a Pad Truck-Rated

A loaded pickup with a trailer can weigh several times as much as a small car, so every stop makes far more heat. A commuter pad can fade or glaze under that load, while truck and fleet lines are built to keep working hot.

  • Semi-metallic: steel fibers in the mix carry heat away and resist fade. Expect more dust and some noise, plus a little more rotor wear. Most fleet and severe-duty truck lines are built this way.
  • Carbon-fiber ceramic: a ceramic base reinforced with carbon fibers. It aims for strong bite with less dust and noise, which suits a truck that tows on weekends and commutes during the week.
  • Plain ceramic or organic: quiet and clean on light trucks with modest loads, but a weaker match for frequent heavy towing.

Hardware matters too. Multi-layer shims, new abutment clips and a coated backing plate keep the pad from rusting or rattling in the bracket.

Front, Rear and the Reference Truck

The front axle does most of the stopping, so front pads wear faster on almost every pickup. On the 2013 to 2022 Super Duty, front sets use the D1680 shape and rear sets use D1691, sold separately. Below are four front sets and two rear sets.

Brakes change with model year, chassis, dual rear wheels and brake package, so enter your year, model, drivetrain and engine in Amazon’s fit checker and confirm the axle. No single pad listing fits every truck, or even every Super Duty.

Best Brake Pads for Trucks: Six Super Duty Listings Compared

Each pick is one listing that names the Super Duty in its fitment. Use the part number as a reference, then find the same line for your truck and confirm year, trim, axle and brake package with the fit checker.

1. PowerStop Z36-1680: Front Carbon-Fiber Ceramic Truck and Tow Pads with Hardware

PowerStop Z36-1680 product photo
Key features
  • Carbon-fiber ceramic Truck & Tow compound
  • Front set, listing names F-250, F-350 and F-450 Super Duty
  • Installation hardware included
  • Made for towing, hauling and lifted trucks

PowerStop’s Z36 Truck & Tow line is the company’s pad for pickups, SUVs and 4x4s that work for a living. This example, part number Z36-1680, is a front set whose listing names the Ford F-250, F-350 and F-450 Super Duty, and it ships with installation hardware. PowerStop sells the same compound under other numbers for many other trucks.

The friction material is a carbon-fiber ceramic. PowerStop says it gives more stopping power than OE replacement pads while staying quiet and lasting a long time, and that it is built for the added stress of towing, hauling, mountain driving and lifted trucks with less brake fade. Compared with a semi-metallic fleet pad, a ceramic-based mix like this usually leaves lighter dust on the wheels, which matters to owners who use the same truck to commute.

This is a sensible middle ground for a pickup that pulls a camper or a trailer of equipment on a regular basis but spends most weekdays unloaded. Drivers who tow near the rated limit every day, or who run long downhill grades with a heavy load, may prefer one of the semi-metallic severe-duty sets below. Use the fit checker for your exact year, cab and brake package before ordering.

View PowerStop Z36-1680 on Amazon

2. Bosch Blue BE1680H: Front Semi-Metallic Pads with Hardware for 2013-24 Super Duty

Bosch Blue BE1680H product photo
Key features
  • Platform-specific semi-metallic friction
  • Listing names 2013-24 F-250 and F-350 Super Duty
  • Multi-layer shim and rust-inhibiting backing plate
  • Hardware kit and synthetic lubricant in the box

Bosch Blue is the company’s application-matched pad range, and for heavy pickups it is sold in a semi-metallic formula. The BE1680H example is a front set whose listing names the 2013 to 2024 Ford F-250 and F-350 Super Duty and the 2013 to 2016 F-450 Super Duty. The box holds pads for one axle, a hardware kit and synthetic lubricant for the sliding points.

Bosch describes the friction material as tuned to each platform for stopping power, reduced fade and long life. An OE-style multi-layer shim on the back of each pad damps noise, the steel backing plates carry a rust-inhibiting coating, and slots and chamfers copy the original design. The Bosch Blue disc brake pad page also has a part-number lookup that lists the years and models each number fits.

This line suits an owner who wants a complete, straightforward front job: new pads, new clips and the right grease in one carton. As a semi-metallic pad it will make more dust than a ceramic mix, and some drivers notice a little more noise on cold mornings. Check trim, engine and drivetrain in the fit checker, because Super Duty brakes vary.

View Bosch Blue BE1680H on Amazon

red pickup crossing a dry lake bed

3. Bendix Fleet MetLok MKD1680FM: Front Semi-Metallic Pads for Heavy-Duty Super Duty Trucks

Bendix Fleet MetLok MKD1680FM product photo
Key features
  • Semi-metallic fleet compound, copper free
  • Listing names 2013-22 and 2024 F-250 SD, 2013-22 F-350 SD
  • Titanium coating and multi-layer adhesive shim
  • 8 abutment clips and instruction sheet included

Bendix sells its Fleet MetLok line for heavy-duty vehicles and hard driving conditions, the kind of work fleet trucks see every day. The MKD1680FM example is a front set whose listing names the 2013 to 2022 and 2024 F-250 Super Duty, the 2013 to 2022 F-350 Super Duty and the 2013 to 2015 F-450 Super Duty, and it lists Ford equivalents DC3Z2001A, DC3Z2001C and DC3Z2001E.

The specifications describe a copper-free semi-metallic compound with a titanium coating and a multi-layered shim fixed with adhesive. Each box includes eight abutment clips, four per side, plus an instruction sheet, and the listing gives a maximum pad thickness of 18.39 mm with the shim fitted. Bendix says the pads are built to OE specifications for fit, form and function and are made to resist wear and corrosion.

Choose this line for a pickup that carries tools, pulls a trailer daily or does stop-and-go delivery work, where pad life and fade resistance matter more than clean wheels. Expect the dust and occasional noise that come with most fleet semi-metallic pads. Confirm the exact year and chassis with Amazon’s fit checker before you order.

View Bendix Fleet MetLok MKD1680FM on Amazon

4. Doc’s Diesel Front Pads: Severe-Duty Semi-Metallic Set for 6.7L Power Stroke Super Duty

Doc's Diesel Front Pads product photo
Key features
  • Semi-metallic severe-duty compound
  • Listing names 6.7L Power Stroke F-250, F-350, F-450 Super Duty
  • Four pads for the full front axle
  • Rubberized hardware, shims and high-temp lubricant

Doc’s Diesel builds this front set for diesel pickups, and the listing names the 6.7L Power Stroke Ford F-250, F-350 and F-450 Super Duty. The title gives 2013 to 2026, while the fitment bullet gives 2012 to 2025, so the fit checker is the place to settle your year. It replaces Ford numbers including DC3Z2001A and DC3Z2001E.

The pads use a semi-metallic compound that the maker says handles high-heat braking for towing and hauling. The box holds four pads for both front wheels, rubberized abutment hardware, multi-layer shims and a packet of high-temperature lubricant, and the listing says the shims and rubberized hardware help cut noise and dust. A red coating on the friction face is there to speed up break-in, and the set is listed as ECE R90 certified.

A diesel Super Duty is heavy before it hitches a fifth-wheel, so owners who tow near the truck’s limits are the natural buyers. Gas-engine trucks may share the same pad shape, but this listing names the diesel, so check carefully before ordering for a gas model. As with any semi-metallic pad, expect darker dust than a ceramic set.

View Doc's Diesel Front Pads on Amazon

utility trailer with a blue cover

5. Wagner SevereDuty SX1691: Rear Semi-Metallic Fleet Pads with OE-Style Shims

Wagner SevereDuty SX1691 product photo
Key features
  • Rear semi-metallic carbon-based compound
  • Listing names 2012-22 F-350 SD and 2013-16 F-450 SD
  • OE-style shims, slots and chamfers
  • Zero-copper OE25 friction formula

Wagner SevereDuty is aimed at fleets and vehicles that work in demanding conditions. The SX1691 example is a rear set, and its listing names the 2012 to 2022 F-350 Super Duty, the 2013 to 2016 F-350 and the 2013 to 2016 F-450 Super Duty. F-250 owners should run their truck through the fit checker, since the listing title does not spell out every model that shares the shape.

The friction material is a semi-metallic, carbon-based mix that Wagner engineers in house for long life in tough applications, using its OE25 zero-copper formula. Wagner says the line goes through OE-style on-vehicle testing for extreme heat, frequent stopping and heavy loads. The pads carry OE-style shims, slots and chamfers, and stainless-steel hardware is included for key applications.

Rear pads work harder on a truck than on a car, especially with weight in the bed or on the hitch, so a rear set built for fleet duty makes sense for a hauling pickup. If you mostly drive empty, a standard replacement pad may wear just as long. Check the rear rotors for heat spots and thickness while the wheels are off.

View Wagner SevereDuty SX1691 on Amazon

6. Raybestos Specialty Truck SP1691TRH: Rear Heavy-Duty Pads with Mechanical Retention

Raybestos Specialty SP1691TRH product photo
Key features
  • Truck and medium duty friction line
  • Listing names 2013-21 F-250 and F-350 Super Duty
  • Mechanical Retention System against rust jacking
  • Low fade with low dust and quiet operation

Raybestos Specialty Truck & SUV pads come from the company’s Truck and Medium Duty friction program, which also covers larger commercial vehicles. The SP1691TRH example is a rear set whose listing names the 2013 to 2021 Ford F-250 and F-350 Super Duty and the 2013 to 2015 F-450 Super Duty. It uses application-specific heavy-duty materials developed for everyday, heavy-use work.

The feature that stands out for a northern truck is the Mechanical Retention System. Raybestos uses it where the application calls for it, and says it improves shear strength and reduces pad end lift, noise and rust jacking, the swelling that happens when corrosion forms between the friction material and the backing plate. The listing also claims low fade, low dust, quiet running in hard use and all-weather stopping.

That makes this a good fit for a pickup that sees brine all winter and a trailer all summer, where rear pads can rust apart before they wear out. It is a rear set only, so pair it with a front line from this list. Confirm your year, chassis and drivetrain with Amazon’s fit checker before ordering.

View Raybestos Specialty SP1691TRH on Amazon

Matching a Pad Line to Your Workload

Most buyers of the best brake pads for trucks trade a little quiet for a lot of heat tolerance. Here is how each example listing compares.

ListingAxle and compoundSuper Duty years namedSuits
PowerStop Z36-1680Front, carbon-fiber ceramicF-250, F-350, F-450 Super Duty (check years)Regular towing with less dust
Bosch Blue BE1680HFront, semi-metallic2013-24 F-250 and F-350Mixed hauling and daily use
Bendix Fleet MetLok MKD1680FMFront, semi-metallic2013-22 and 2024 F-250, 2013-22 F-350Work and fleet trucks
Doc’s Diesel front setFront, semi-metallic6.7L Power Stroke trucksDiesel owners who tow heavy
Wagner SevereDuty SX1691Rear, semi-metallic2012-22 F-350, 2013-16 F-450Rear axle on loaded trucks
Raybestos SP1691TRHRear, truck and medium duty2013-21 F-250 and F-350Salt-belt rear pads
Years and fitment come from each Amazon listing. Confirm your own truck, axle and brake package with the fit checker.

Look hard at the rotors while the wheels are off. Wagner’s technical tip on brake judder explains that repeated hard stops, like a long descent with a load, overheat rotors, and that rotors showing blue spots should be replaced together with the pads. Our roundup of replacement brake rotors covers the next step if yours look that way.

rusted old sedan parked outdoors

Plow Season and Salt on West Michigan Trucks

Pickups around Grand Rapids often push snow all winter, then pull a boat or camper once the roads clear. Brine gets under the pad ears and clips, rust builds behind the friction material, and the pad binds in the bracket. The result is a dragging caliper, a pull or one pad worn far thinner than its partner.

When you swap pads, wire-brush the brackets to clean metal, fit the new clips and put a thin film of brake lubricant on the contact points only. For more winter-focused choices, see our brake pads for winter driving, and for rotors that resist rust on the hats and vanes, our list of coated rotors for salted roads.

empty steel garage building

Bed new pads before you hook up a trailer, following the moderate-stop steps in the box. Pad life on a work truck swings widely with load, terrain and plowing hours, and our article on how long brake pads last explains what speeds up wear. Choosing the best brake pads for trucks only pays off if the rest of the system is healthy.

Signs Your Truck Brakes Need a Professional

Pads on a heavy pickup are a reasonable driveway job if you have a good jack, rated stands, a caliper piston tool and a torque wrench for the caliper bolts and lug nuts. Some newer trucks put an electric parking brake in the rear caliper, and that piston must be retracted with a scan tool or the maker’s service mode, never forced back.

clean home garage with storage shelves

Most pickups use a metal wear tab that squeals against the rotor, while many European cars use an electronic sensor and a dash light, as our explainer on the Audi brake pad warning light shows. A sinking pedal, grinding, a strong pull or a shudder means an inspection before the next tow. Our brake repair service in Grand Rapids handles pads, rotors, calipers, hardware and brake lines on foreign and domestic vehicles, trucks included.

Frequently Asked Questions

Are ceramic or semi-metallic pads better for towing?

Semi-metallic pads tolerate heat well and are the usual choice for frequent heavy towing, at the cost of more dust and some noise. Carbon-fiber ceramic truck lines such as PowerStop Z36 aim for similar heat handling with cleaner wheels. Plain commuter ceramic pads are a weaker fit for a heavy trailer.

What are the best brake pads for diesel trucks?

Diesel pickups are heavy before they hitch anything, so a severe-duty or truck and tow line makes sense. The Doc’s Diesel set in this guide is listed for 6.7L Power Stroke Super Duty trucks, while Bosch Blue and Bendix Fleet MetLok sell semi-metallic sets for the same trucks. Confirm fit by year and engine.

Should I replace front and rear truck pads together?

Not necessarily. Front pads usually wear out first, so measure both axles and replace whichever is low. Always change pads in pairs across an axle, and if you tow a lot, check the rear pads at every front job because they can wear faster than you expect.

Truck pulling, grinding or feeling long in the pedal with a trailer behind it? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a truck brake inspection through our contact page.

If the pickup works through the day, bring it to 456 Carrier St NE, Grand Rapids, once the shift is over and leave it with our after-hours drop-off.