456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Camry, RAV4, Corolla or Highlander? How to Pick the Best Struts for Toyota

best struts for toyota: white crossover on a forest road

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Toyotas are known for running long past 150,000 miles, and by then the original struts have usually given up quietly. The best struts for Toyota cars and SUVs are the ones made for your exact model, generation and corner, because a Camry, a RAV4, a Corolla and a Highlander share almost no suspension parts.

Below you will find how the four models differ, how to order with confidence and six specific Amazon listings, each tied to the Toyota it names. Not sure the struts are really worn? Start with our guide on how to tell if struts are bad.

Quick answer

Which struts should a Toyota car or SUV get?

For a stock Camry, RAV4, Corolla or Highlander, an OE-style strut such as KYB Excel-G, Bilstein B4 or Monroe OESpectrum brings back the factory ride. A complete assembly like Monroe Quick-Strut, KYB Strut-Plus or Gabriel ReadyMount skips the spring compressor. Either way, match the listing to your year, engine, drivetrain and corner.

Our Quick Picks

Three quick picks: an OE-style front strut for the newer RAV4, a bare Excel-G strut for the Camry and a ready-to-fit assembly for the Highlander. All six listings are reviewed below.

Bilstein B4 22-282927 product photo
RAV4 pick

Bilstein B4 22-282927

Front right strut · 2013-2018 RAV4

An OE-style twin-tube strut for the fourth-generation RAV4.

SuitsRAV4 owners who want the factory ride back
View on Amazon →
KYB Excel-G 339290 product photo
Camry pick

KYB Excel-G 339290

Gas strut · Toyota Camry

A bare OE-grade strut that keeps the Camry's factory feel.

SuitsCamry owners reusing good springs and mounts
View on Amazon →
Monroe Quick-Strut 272483 product photo
Easiest install

Monroe Quick-Strut 272483

Complete assembly · 2008-2011 Highlander

A ready-to-bolt-in corner for the second-generation Highlander.

SuitsHighlander owners with tired springs and mounts
View on Amazon →

How Toyota Strut Setups Differ by Model

All four models use MacPherson struts at the front, so the strut carries the coil spring and helps locate the wheel. The rear is where they split. Depending on the generation, a Toyota may use rear struts with their own springs or plain rear shocks, and Bilstein, for example, lists a rear shock rather than a rear strut for the 2013 to 2018 RAV4.

  • Bare strut: the damper alone; the old spring and mount move across with a spring compressor.
  • Complete assembly: strut, spring and upper mount arrive bolted together.
  • Sided parts: many front struts fit only the left or right corner.
  • Trim-specific parts: some Camry SE models use different struts from the base car.

Generations matter as much as model names. A 2012 and a 2013 RAV4 sit on different platforms and take different struts, and the Corolla changed the same way between 2008 and 2009.

Ordering the Right Part for Your Toyota

No listing below fits every version of its model. Treat the title’s model and years as a first filter, then run your car through the Amazon fit checker with these details:

  1. Model year and generation.
  2. Engine, since four-cylinder and V6 versions can differ.
  3. Drivetrain, front-wheel or all-wheel drive.
  4. Trim, where a sport package changes the strut.
  5. Position: front or rear, left or right.

The Toyota part number stamped or printed on your old strut is the surest cross-check, and several listings print the numbers they replace. Plan on buying in axle pairs, so both front corners or both rear corners get new parts at the same time.

Best Struts for Toyota: Six Listings by Model and Corner

Every pick is a specific Amazon US listing for a named Toyota. If your year or corner differs, look up the matching part number in the same brand line.

1. Bilstein B4 22-282927: OE Replacement Front Right Twin-Tube Strut for 2013-2018 Toyota RAV4

Bilstein B4 22-282927 product photo
Key features
  • Front right strut for the 2013-2018 RAV4
  • Twin-tube OE replacement design
  • Constant damping under any load
  • Bilstein gas-pressure technology

Many fourth-generation RAV4s now have well over 100,000 miles on their original front struts. This Bilstein listing is a B4 OE Replacement twin-tube strut, part number 22-282927, and its title names the 2013 to 2018 Toyota RAV4 and the front right corner. B4 is the Bilstein series meant to restore the original ride rather than firm it up.

The listing points to high power reserves, high OE quality and damping that stays constant under any load, which matters on a crossover that carries passengers one day and a loaded cargo area the next. Bilstein also credits its gas-pressure technology for traction and precise handling. Because this is a bare strut, your existing coil spring, upper mount and dust boot move across from the old unit, and that step needs a proper spring compressor.

This part covers the right side only, so the left front is a separate Bilstein number and you will want both for an even front axle. The rear of this RAV4 generation uses a shock rather than a strut, which is also listed on its own. Confirm year, engine, drivetrain and position with the Amazon fit checker, then book an alignment once the new struts are in.

View Bilstein B4 22-282927 on Amazon

2. KYB Excel-G 339290: OE-Grade Gas Strut for Toyota Camry, Replaces Toyota 48530-09551

KYB Excel-G 339290 product photo
Key features
  • Calibrated for the Toyota Camry
  • Replaces Toyota 48530-09551 and 72943
  • Teflon coated piston band
  • Sintered iron strut rod guide

KYB’s Excel-G line is the brand’s OE-grade replacement range for Asian cars. This listing, part number 339290, says it is calibrated to help restore the original handling and control of the Toyota Camry. Its title also lists the numbers it replaces, Toyota 48530-09551 and the interchange number 72943, which gives you a reliable way to compare it against the strut already on your car.

KYB describes a seamless working cylinder paired with a Teflon coated piston band for a positive seal and longer life. The rod is triple chrome plated and runs through multi-lip oil seals that reduce wear, while a precision sintered iron rod guide is meant to help the strut hold correct wheel alignment. These are the details that separate a quality bare strut from a generic one.

The title does not state model years or a corner, so the replaced Toyota number and the Amazon fit checker carry more weight here than usual. Enter year, engine and trim, and read any qualifier notes before ordering. As a bare strut it reuses your spring and mount, so it needs a compressor and suits owners whose mounts are still quiet and solid.

View KYB Excel-G 339290 on Amazon

hatchback on a winding road

3. Monroe Quick-Strut 272483: Complete Strut and Coil Spring Assembly for 2008-2011 Toyota Highlander

Monroe Quick-Strut 272483 product photo
Key features
  • Fits 2008-2011 Toyota Highlander
  • Strut, spring and upper mount preassembled
  • No spring compressor needed
  • Rust coating with salt spray testing

The second-generation Highlander is a heavy three-row SUV, and by now plenty of them have sagging springs as well as worn struts. Monroe’s Quick-Strut 272483 is a complete assembly listed for the 2008 to 2010 Highlander and the 2011 model year. It arrives with the strut, coil spring and upper mount already put together, so there is no spring to compress and no old mount to reuse.

According to the listing, each application-specific spring is calibrated to the OE design to restore ride height and support the vehicle’s weight. The premium upper mount is meant to bring back smooth steering and cut noise, vibration and memory steer. Monroe also cites a high-quality steel tube and weld design, and a protective coating that goes through salt spray testing, a useful point on an SUV that spends its winters on salted roads.

Quick-Strut part numbers are often specific to one corner, so read the fit notes to see which position this unit covers and order its partner for the other side. Highlander versions differ by engine and drivetrain, so enter every detail in the Amazon fit checker. Plan an alignment after the front corners are done.

View Monroe Quick-Strut 272483 on Amazon

4. KYB Strut-Plus SR4478: Complete Corner Unit With Excel-G Strut, Mount and Spring for Toyota Corolla

KYB Strut-Plus SR4478 product photo
Key features
  • Complete corner unit for the Toyota Corolla
  • Includes a KYB Excel-G strut
  • KYB spring matched to the strut
  • Stronger steel outer shell

The Corolla is a car people keep for a long time, and a full front corner replacement is often the cleanest fix once the struts, mounts and springs have all aged together. KYB’s Strut-Plus SR4478 is a complete corner unit that the listing says is designed for proper ride height and original handling on the Toyota Corolla. It is engineered and preassembled for an exact fit, so it goes in as one piece.

Inside is a KYB Excel-G strut with a stronger steel outer shell and application-specific damping valves. KYB pairs it with a spring engineered to match the strut, which the listing says helps hold proper ride height longer and control weight without hurting ride quality. Having the mount, spring and strut from one maker also means the parts are designed to work together rather than mixed from different sources.

The title names the Corolla but not the years or the side, and Corolla struts changed between generations. Enter year, trim and engine in the Amazon fit checker and read the notes for the corner it covers. KYB’s corner units are usually sided, so expect to order a matching unit for the opposite side and an alignment afterward.

View KYB Strut-Plus SR4478 on Amazon

SUV parked under misty mountains

5. Monroe OESpectrum 72307: Suspension Strut for 2007-2011 Toyota Camry, Avalon and Solara

Monroe OESpectrum 72307 product photo
Key features
  • Listed for 2007-2011 Toyota Camry
  • Also lists Avalon, Solara and Lexus ES350
  • Rod displaced valving
  • Fluon banded piston and all-weather fluid

The sixth-generation Camry sold in huge numbers, and many of these cars are now on their second or third owner with the original struts still in place. Monroe’s OESpectrum 72307 is a bare strut listed for the 2007 to 2011 Toyota Camry. The same listing also names the 2006 to 2012 Avalon, the 2006 to 2008 Solara and the 2007 to 2009 Lexus ES350, which share parts with it.

OESpectrum is Monroe’s line built around the original ride. The listing describes rod displaced valving tuned to each application that adjusts to road extremes for consistency and comfort, plus a fluon banded piston that keeps a steady seal against the pressure tube. Monroe also uses an all-weather fluid with modifiers meant to reduce friction and keep the rod reacting smoothly, and the listing gives the United States as the country of origin.

Because it is a bare strut, your coil spring and mount move over from the old unit with a spring compressor, so it suits a car whose mounts are still in good shape. Camry trims and engines from these years do not all share struts. Check year, engine, trim and position in the Amazon fit checker before you order a pair.

View Monroe OESpectrum 72307 on Amazon

6. Gabriel Ultra ReadyMount G57205: Front Right Strut and Coil Spring Assembly for 2006-2012 Toyota RAV4

Gabriel ReadyMount G57205 product photo
Key features
  • Front right assembly for 2006-2012 RAV4
  • Pre-assembled, no spring compressor
  • 6.33 in stroke, 21.02 in extended length
  • Interchange numbers printed on the listing

The third-generation RAV4 is now old enough that rust and worn mounts are as much of a problem as the struts themselves. Gabriel’s Ultra ReadyMount G57205 is a front right strut and coil spring assembly, and the listing names the 2006 to 2012 Toyota RAV4. Being preassembled, it removes the spring compression step that makes a bare strut job harder at home.

Gabriel prints useful specifications on the listing: a 6.33 inch stroke, a 21.02 inch extended length and a 14.69 inch collapsed length, along with upper and lower mount codes. It also lists a long set of interchange numbers, including Monroe 172275 and 272275 and KYB SR4461 and SR4459. That list is handy if your old assembly carries one of those numbers, because it confirms you are looking at the same corner.

This unit covers the right front only, so you will need the matching left assembly to keep the front axle even. RAV4s from these years came with four-cylinder and V6 engines and front or all-wheel drive, and some parts differ between them. Run your details through the Amazon fit checker and schedule an alignment after the swap.

View Gabriel ReadyMount G57205 on Amazon

Bare Strut or Complete Assembly: Comparing the Six

Choosing the best struts for Toyota models mostly comes down to the type column below, because it sets how much work the job takes and which tools you need.

ListingToyota and positionTypeKeep in mind
Bilstein B4 22-2829272013-2018 RAV4, front rightBare strutNeeds a spring compressor; left side is a separate part
KYB Excel-G 339290Camry, per listingBare strutTitle gives no years; check the replaced Toyota number
Monroe OESpectrum 723072007-2011 CamryBare strutReuses your spring and mount
Monroe Quick-Strut 2724832008-2011 HighlanderComplete assemblyCheck the fit notes for the corner
KYB Strut-Plus SR4478Corolla, per listingComplete assemblyTitle gives no years; confirm generation
Gabriel ReadyMount G572052006-2012 RAV4, front rightComplete assemblyOrder the matching left unit
Toyota strut listings compared by model, position and type

A complete assembly brings a new spring and mount along with the damper, which helps on a high-mileage car where those parts are tired too. A bare strut suits a car whose springs and mounts are still sound. Whichever you choose, Monroe advises an alignment after strut replacement, since camber, toe and caster can all shift.

hatchback by a wheat field

Got a second car from another brand? Our roundup of the best shocks and struts for daily drivers covers other common commuters.

Salt, Potholes and Toyota Struts in West Michigan

A Grand Rapids winter is rough on any strut. Road salt eats at spring seats, strut bodies and the bolts that hold them to the knuckle, and the freeze-thaw cycle each spring fills the streets with potholes. That is one reason the best struts for Toyota cars here are often complete assemblies, with new perches and hardware included.

Not every oily strut is finished. Gabriel’s shock and strut FAQ explains that a light film of oil is normal misting, while oil running down the body points to a failed seal. Creaks and groans over speed bumps are often a dry mount or sway bar bushing rather than the strut, and our guide to why a car squeaks when going over bumps helps you tell them apart.

mechanic using a grinder

After a hard hit, look for a low corner, a new pull or fresh oil on the strut. Our list of pothole damage signs covers the other parts worth checking.

When to Hand the Job to a Shop

A complete assembly on a Corolla or an older RAV4 is a reasonable driveway job with jack stands, a torque wrench and patience. A bare strut is a different story. The coil spring has to be compressed before the top nut comes off, and a spring that slips can do serious harm, so read our guide to choosing a coil spring compressor before you start.

Seized knuckle bolts on salt-belt cars and the alignment that follows any front strut swap are the other reasons people bring the job in. A knock rather than a squeak? Our guide to a clunking noise over bumps lists the usual causes.

close-up of metal teeth on yellow

Our suspension repair in Grand Rapids covers strut and shock replacement, mounts and the linked steering parts on Toyotas and other foreign and domestic vehicles. Hendrick Hoffman, who runs the shop, has passed both the ASE and the State of Michigan certifications that cover steering and suspension work.

Frequently Asked Questions

What are the best struts for Toyota RAV4 models?

It depends on the generation. For a 2013 to 2018 RAV4, the Bilstein B4 22-282927 is an OE-style front strut. For a 2006 to 2012 RAV4, the Gabriel ReadyMount G57205 is a complete front assembly. Confirm engine and drivetrain on Amazon first.

Should I replace Toyota struts in pairs?

Yes. Replace both fronts or both rears together. One new strut beside a worn one makes the car lean, dive and brake unevenly, and it can wear the tires faster.

Do I need an alignment after new struts on my Toyota?

After front struts, yes. The strut positions the top of the wheel, so removing it can change camber and toe. Monroe recommends an alignment whenever struts are replaced.

Is a quick strut or a bare strut better for a Camry?

A complete assembly is quicker and brings a new spring and mount, so it suits older cars and home installs. A bare strut such as the Monroe OESpectrum 72307 reuses your spring and needs a compressor, which makes it a better fit when a shop does the work.

Toyota bouncing, leaning or knocking over bumps? Phone 456 AutoFix at 616-279-3832 between 8am and 5pm, Monday to Friday, or request a suspension inspection on our contact page.

Tied up at work while we are open? Bring the Toyota to 456 Carrier St NE, Grand Rapids, and hand it over through the after-hours drop-off.