As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Hook a camper or a boat trailer to a half-ton pickup or a full-size SUV and the front end tells you right away how healthy the struts are. The best struts for towing keep the nose from bobbing, settle the truck after a dip and hold steering steady when the trailer pushes back.
This guide covers what a strut can and can’t do under a load, how heavy-duty and complete-assembly options differ, and five specific listings for the Ram 1500, Tahoe, Expedition, F-150 and Silverado 1500. If you aren’t sure your current parts are worn yet, read our guide on how to tell if struts are bad before you order anything.
Quick answer
Which struts suit a truck or SUV that tows?
For a half-ton or full-size SUV that pulls a trailer, look at heavy-duty units such as KYB Truck-Plus or Bilstein 5100 and B6 4600, or a complete assembly like Monroe Quick-Strut when the springs have sagged. Struts control movement but don’t add towing capacity. Replace them in pairs and get an alignment.
Our Quick Picks
Three quick picks that cover the main towing setups: a heavy-duty complete assembly, an adjustable monotube for full-size SUVs and an OE-style loaded strut. All five listings are reviewed below.

KYB SR4549 Truck-Plus
A preassembled corner that KYB builds for trucks that tow and haul.

Bilstein B8 5100 (Tahoe/Yukon)
Firm, height-adjustable front units for a full-size SUV that tows.

Monroe Quick-Strut 371139
Brings back factory ride height on an SUV with tired springs and mounts.
What a Strut Does With a Trailer Behind You
A front strut combines the damper with the coil spring seat and upper mount, so it carries part of the steering geometry as well as controlling bounce. When a trailer’s tongue weight presses on the hitch, the rear squats and the front gets lighter. Worn struts let the nose float and wander, and the truck takes longer to settle after every expansion joint.
The damper itself doesn’t hold the truck up. Monroe’s Carry the Load product guide notes that its truck shocks do not support weight and instead help improve control under load. The springs, hitch setup and the tow rating in your owner’s manual set the limits, and no strut raises them.
Choosing a Tow-Duty Strut
Picking the best struts for towing starts with the vehicle. Most of the listings below fit tow-prone half-tons and full-size SUVs, the vehicles that pull campers, boats and utility trailers on weekends. Four things separate a good choice from a disappointing one.
- Damping design: monotube units such as Bilstein’s run a large piston and resist fade on long, hot pulls. Twin-tube units like Rancho’s RS5000X focus on a compliant ride with extra fluid capacity.
- Bare strut or loaded assembly: a bare strut reuses your old spring and mount. A loaded assembly arrives with a new spring and mount, which matters when the old spring has sagged from years of tongue weight.
- Ride height: some units add an adjustable spring perch for leveling. Lifting the nose changes headlight aim and the way the truck sits with a trailer on, so set it with towing in mind.
- Corrosion protection: coated bodies and protected rods last longer when the truck spends winter on brined roads.
Best Struts for Towing: Five Listings in Detail
Each pick is one specific Amazon US listing for a named vehicle. Every line also comes in versions for other trucks and SUVs, so enter your year, model, drive type and trim in Amazon’s fit checker before you buy, and never assume one listing fits every version of a vehicle.
1. KYB SR4549 Truck-Plus: Complete Strut, Mount and Spring Assembly for Ram 1500

- Listed for the Ram 1500
- Strut, mount and spring preassembled
- Built for towing and hauling
- Matched KYB coil spring
KYB’s Truck-Plus range is its heavy-duty take on the complete strut assembly, and this listing, SR4549, is a Ram 1500 corner unit. It arrives with the strut, upper mount and coil spring already put together, so the job is a bolt-in swap instead of a spring transfer. That removes the most dangerous step of a strut replacement on a heavy pickup.
The listing says Truck-Plus gives more damping performance than standard shock absorbers and is built for trucks that work, go off-road, tow a trailer or haul heavy loads. KYB pairs the strut with an application-engineered spring designed to keep proper ride height longer and control weight without giving up ride quality. On a Ram that spends weekends with a camper or a loaded utility trailer behind it, that combination aims at less nose float and a quicker settle after bumps.
The listing names the Ram 1500 but not the exact years, so check years, 2WD or 4WD, trim and side in Amazon’s fit checker before ordering. KYB also sells a standard Strut-Plus version for Rams that rarely tow, which suits a truck driven empty most of the time. Replace both front corners together and book an alignment afterward.
View KYB SR4549 Truck-Plus on Amazon
2. Bilstein B8 5100 Ride Height Adjustable: Front Strut Pair for 2015-2020 Tahoe and Yukon

- Fits 2015-2020 Tahoe/Yukon w/o Police Package
- 0-1.6 in. adjustable front lift
- Snap-ring spring perch
- Zinc-plated body for rust protection
This Bilstein B8 5100 listing is a front pair for the 2015-2020 Chevrolet Tahoe and GMC Yukon without the police package. The 5100 is Bilstein’s truck and SUV line, and this version has an adjustable spring perch with several snap-ring grooves. That lets you run the SUV at factory height or raise the front by up to 1.6 inches, according to the listing.
Bilstein says each application is tuned through real-world road testing for steering precision and control under varying loads and terrain. The zinc-plated finish protects the body from rust and road salt, which matters for an SUV that spends Michigan winters on treated roads. For a Tahoe that tows a boat or camper, firm monotube damping helps the front stay planted when the trailer pushes and pulls on the hitch.
These are not loaded assemblies. Your factory coil spring and top mount have to be moved onto the new strut, which means a spring compressor and real care, or a shop. If you tow heavy, consider keeping the perch at or near the factory setting, since lifting the nose changes how the SUV sits with tongue weight. Confirm your trim and suspension type in Amazon’s fit checker, then plan an alignment.
View Bilstein B8 5100 (Tahoe/Yukon) on Amazon

3. Monroe Quick-Strut 371139: Strut and Coil Spring Assembly for Ford Expedition

- Listed for 2010-2022 Expedition and 2010-2017 Navigator
- Strut, spring and mount preassembled
- No spring compressor needed
- Rust-protective coating, salt spray tested
Monroe’s Quick-Strut is a complete strut assembly, and listing 371139 names the 2010-2022 Ford Expedition and the 2010-2017 Lincoln Navigator. It comes with the strut, coil spring and upper mount preassembled. For a big SUV that has pulled a trailer for years, the spring is often as tired as the strut, so replacing both together restores the stance as well as the damping.
The listing describes an application-specific coil spring calibrated to the OE design, engineered to restore ride height and support the vehicle’s weight. An OE-style upper mount aims to bring back smooth steering and cut noise, vibration and memory steer. Monroe also lists a protective coating that has been salt spray tested, a useful point for an SUV that sees road brine every winter.
Quick-Strut is an OE-style restoration part rather than a firmer heavy-duty upgrade, so expect a factory-like ride rather than a stiffer one. The Expedition changed generations within those model years, so confirm year, drive type, trim and position in Amazon’s fit checker before you order, and check whether left and right sides are sold separately. Replace both sides of the axle together and have the alignment set afterward.
View Monroe Quick-Strut 371139 on Amazon
4. Rancho RS5000X RS55836: Twin-Tube Front Strut for 2014-2020 Ford F-150

- Listed for 2014-2020 Ford F-150
- 60 PSI nitrogen gas charge
- All-weather fluid rated -40 to 248°F
- Nitro-carburized piston rod
The Rancho RS5000X RS55836 is a bare strut listed for the 2014-2020 Ford F-150. Rancho builds the RS5000X as a twin-tube design, with a large body filled with all-weather fluid that the listing says withstands internal temperatures from -40 to 248 degrees Fahrenheit. That fluid capacity helps the strut run cooler on a long pull with a trailer behind the truck.
Rancho lists Cross Tuned technology, with a rebound valving system and advanced compression phase, plus Progressive Engagement Valving tuned per vehicle to soften small, low-speed impacts. A 60 PSI nitrogen charge is meant to reduce foaming and damping fade, and a nitro-carburized rod resists scuffs and corrosion. A polyvinyl boot protects the rod from grit and salt spray.
Because this is the strut alone, your F-150’s factory spring and top mount have to be transferred, which needs a spring compressor and careful work. It suits a truck whose springs still hold ride height and mounts are quiet. The 2014 and 2015-2020 F-150 are different generations that both appear in the listing, so check drive type, trim and side in Amazon’s fit checker before buying, and align the truck once both sides are done.
View Rancho RS5000X RS55836 on Amazon

5. Bilstein B6 4600 24-337113: Front Strut for 2014-2018 GM 1500 Trucks

- Listed for 2014-2018 GM 1500
- Uses factory coil springs
- OEM mounting points, direct fit
- Aligns to factory specs
Bilstein’s B6 4600 line is its stock-height heavy-duty replacement, and part 24-337113 is a front unit listed for 2014-2018 GM 1500 trucks, the Chevrolet Silverado 1500 and GMC Sierra 1500 of those years. Unlike the 5100, it has no lift adjustment. It keeps the truck at factory ride height, which suits a pickup that tows and should stay level and predictable with a trailer hitched.
The listing says it uses the vehicle’s factory coil springs and OEM mounting locations for a direct fit, and that the truck can be aligned to factory specifications to avoid abnormal tire wear. Bilstein’s 4600 units are gas-charged monotubes, a design known for resisting fade on long, hot runs. For a half-ton that pulls a camper on weekends, that means firmer control of nose dive and bounce than a basic economy strut gives.
As a bare strut, it needs your old spring and top mount moved over, so a spring compressor or a shop is part of the plan. The ride is firmer than an OE-style unit when the bed is empty. Check whether the listing is for one strut or a pair, confirm cab, drive type and trim in Amazon’s fit checker, and replace both fronts together.
View Bilstein B6 4600 24-337113 on Amazon
Matching the Strut to How You Tow
Use this table as a starting point, then check the listing for your exact truck. A strut that rides well empty can feel soft with a loaded camper, and a firm one can feel busy on a commute.
| Strut type | Suits | Trade-off | Install note |
|---|---|---|---|
| Heavy-duty complete assembly (KYB Truck-Plus) | Half-tons that tow or haul often | Costs more than a bare strut | Bolts in; no spring compressor |
| OE-style complete assembly (Monroe Quick-Strut) | SUVs with sagging springs and worn mounts | Restores the factory ride rather than firming it | Bolts in; no spring compressor |
| Monotube bare strut (Bilstein B6 4600) | Stock-height trucks that pull heavy trailers | Firmer ride when empty | Old spring and mount must be transferred |
| Height-adjustable strut (Bilstein 5100) | Leveled trucks and SUVs | Lift changes headlight aim and alignment | Spring transfer and height setup needed |

West Michigan adds its own wear. Freeze-thaw potholes hit struts hard, and road salt attacks lower mounts and coil springs over the winter. A truck that tows a boat all summer and then rides on brined roads all winter wears its front end faster than the mileage suggests.
What About 3/4-Ton Trucks?
Many heavy towing rigs don’t use front struts at all. An F-250 or Ram 2500 with a solid front axle, and a Silverado 2500HD with torsion bars, carry their weight on separate springs and use conventional shocks at each corner. For those trucks you shop for heavy-duty shocks rather than the best struts for towing, and our guide to the best shocks and struts for daily drivers explains how those parts differ.

The same rules apply to those shocks: replace them in axle pairs, match the length to any lift, and keep the truck within the tow rating. If a heavy trailer still makes the rear sag badly, the cause is usually springs or hitch setup rather than worn dampers.
Signs It’s Time for a Professional Look
Clunks, squeaks and a nose that keeps bouncing after a bump are the usual early warnings. Our article on why a car squeaks when going over bumps helps separate strut noise from dry bushings and worn links. Oil running down a strut body means the seal has failed and that corner is due.
A bare strut swap means compressing a coil spring that holds up a heavy truck, and a slipped compressor can cause serious injury. If you go that route, read our guide to the best coil spring compressor first. Either way, any front strut change calls for an alignment so the tires don’t wear unevenly under load.

Our suspension repair in Grand Rapids covers struts, shocks and the parts around them on foreign and domestic trucks and SUVs. Steering and suspension is on the list of areas where Hendrick Hoffman, our owner and head mechanic, holds ASE and State of Michigan certification.
More Buying Guides
Frequently Asked Questions
Do heavy-duty struts increase towing capacity?
No. Towing capacity comes from the truck’s frame, springs, axles, brakes and cooling, and the number in your owner’s manual is the limit. Heavy-duty struts help the truck stay controlled and settled with a load, but they don’t let it pull more.
Should I buy a loaded strut assembly or a bare strut for towing?
If the truck sits low in front, the mounts are noisy or the springs are rusty, a loaded assembly replaces everything at once and skips the spring compressor. If the springs and mounts are healthy, a bare heavy-duty strut gives you firmer damping and reuses the parts that still work.
Is it safe to tow with a leveled front end?
A small level usually works, but it changes how the truck sits with tongue weight on the hitch and moves headlight aim upward. Check the trailer sits level when hitched, re-aim the lights and get an alignment after setting the height.
How often should struts be checked on a truck that tows?
Look at them whenever the tires are rotated, and before the first long trip of the season. Towing, potholes and salt all speed up wear, so watch for leaks, a bouncy nose and uneven tire wear rather than waiting for a set mileage.
Front end floating or wandering once the trailer is hitched? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a strut and suspension inspection through our contact page.
Busy hauling while we’re open? The after-hours drop-off is there for you, and the shop sits at 456 Carrier St NE, Grand Rapids, MI 49505.
