456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Leaks, Heat and Fan Clutches: Picking the Best Water Pump for Ram HEMI Trucks

best water pump for ram: skilled welder working indoors

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A crusty pink trail under the front of the engine, a faint grinding at idle or a heater that goes lukewarm on a cold morning can all point to the same part. Finding the best water pump for Ram pickups with the 5.7L HEMI V8 comes down to one detail most owners skip: which of the two HEMI pump designs your truck uses.

This guide sorts the pumps by model year and part number, then reviews five specific listings from Gates, Mopar, ACDelco, WJB and Airtex. Diesel owners should head to our separate Cummins guide linked further down.

Quick answer

Which water pump suits a Ram with the 5.7 HEMI?

For a 2009 or newer 5.7L truck, the Gates 43559 is a well-built aftermarket match, and the Mopar 68346912AA is the factory part. Trucks built from 2003 to 2008 use a different pump, such as the Airtex AW7168. Always compare the number on your old pump before ordering.

Our Quick Picks

Three pumps that cover both HEMI generations; all five are reviewed in full below.

Gates 43559 product photo
2009 and later pick

Gates 43559

5.7L V8, fan clutch hub

An aftermarket pump built around the HEMI's original fan clutch fit.

SuitsOwners of 2009 and newer 5.7L Ram pickups
View on Amazon →
Mopar 68346912AA product photo
Factory part pick

Mopar 68346912AA

Mopar 68346912AA

The original-equipment pump number for later HEMI trucks.

SuitsOwners who want the part the factory specifies
View on Amazon →
Airtex AW7168 product photo
2003-2008 pick

Airtex AW7168

Replaces 53021380AG family

A pump for first-generation HEMI trucks, with gaskets in the box.

SuitsOwners of 2003 to 2008 5.7L Ram pickups
View on Amazon →

Two HEMI Pump Generations: Find Yours First

The 5.7L HEMI arrived in Ram pickups for the 2003 model year and is still on the order sheet; Ram’s own Ram 1500 page lists it alongside the newer engines. Over that span the engine was reworked, and the water pump changed with it.

  • 2003 to 2008 trucks: pumps that cross-reference Mopar numbers in the 53021380 family, such as 53021380AG or 53021380AJ. Aftermarket equivalents include the Airtex AW7168 and Gates 43501.
  • 2009 and later trucks: pumps listed against the 53022192 family and the later Mopar 68346912AA. Aftermarket equivalents include the Gates 43559 and the AW6341 design.
  • Other Ram engines: the 3.6L V6, 6.4L HEMI and Cummins diesels each take their own pump, so none of the picks below apply to them.

The year split is a starting point, not a guarantee. Some trucks sold around a model-year change, and Ram 2500 and 3500 gas trucks follow slightly different year ranges than the 1500. Enter your exact year, cab, drive and engine in the Amazon fit checker, then hold the listing up against the casting number on your old pump.

Details That Separate a Solid Pump from a Weak One

On the HEMI, the pump is turned by the accessory belt on the front of the engine, and on most trucks the mechanical fan and its clutch bolt straight to the pump hub. That puts a lot of load on the pump bearing, so the bearing and seal deserve more attention than the paint or the box.

  • Bearing: a one-piece, factory-sealed assembly that never needs grease.
  • Shaft seal: a unitized or coated seal, ideally from a maker that pressure tests every unit.
  • Hub and shaft: machined to take the original fan clutch without wobble.
  • Impeller: balanced and shaped to match the original flow.
  • Gasket: included, preferably a style that needs no added sealant.

A fan clutch that has started to slip or wobble can chew up the bearing on a brand-new pump. If yours already looks tired, budget for both parts at once.

Best Water Pump for Ram 5.7 HEMI Trucks: Five Pumps Reviewed

Each listing below covers a range of Ram and related Dodge or Chrysler models with the 5.7L, but no single pump covers every year. Check your year, model and engine on Amazon before you add one to the cart.

1. Gates 43559 Engine Water Pump: 5.7L V8 Fit with No-Sealant Gasket

Gates 43559 product photo
Key features
  • Shaft and hub ground to fit OE fan clutches
  • Unitized seal protects the bearings
  • Factory-sealed one-piece bearing assembly
  • No-sealant-required gasket

Gates has made cooling system parts for decades, and the 43559 is its pump for Ram and Dodge pickups running the 5.7L V8. Other sellers of this same Gates number list it as a replacement for Mopar 53022192AE through 53022192AK and the later 68346912AA, which places it in the 2009 and newer group of HEMI trucks. If your old pump carries one of those numbers, this is a straightforward place to start.

The details in the listing focus on the parts that wear first. The shaft and hub are ground to fit the original fan clutch, which matters on a HEMI because the fan threads straight onto the pump. A unitized seal guards a one-piece bearing assembly that is sealed at the factory and matched for low friction, and the impeller is balanced to steady the flow and ease the load on the seal and bearing.

Gates supplies a gasket that needs no added sealant, so the mating face only needs a careful clean before the pump goes on. It suits a daily driver or a truck that tows on weekends. It is not for a 2003 to 2008 truck, a 3.6L V6 or a diesel, so confirm your year, model and engine on Amazon before ordering.

View Gates 43559 on Amazon

2. Mopar 68346912AA OEM Water Pump: Factory Part for 5.7L HEMI

Mopar 68346912AA product photo
Key features
  • Genuine Mopar OEM part
  • Part number 68346912AA
  • Made to factory fit, form and function specs
  • Vehicle-specific fitment

Mopar is the parts and service brand behind Ram, Dodge, Jeep and Chrysler, and 68346912AA is its own pump number. Aftermarket listings for 2009 to 2020 Ram 1500 trucks and 2009 to 2018 Ram 2500 and 3500 gas trucks with the 5.7L HEMI name this number as the one they replace, which tells you where it belongs in the lineup.

The appeal here is simple. Mopar describes the pump as made to meet the specifications for fit, form and function on the vehicles it is listed for, so the bolt pattern, hub and outlet positions follow the original design. For many owners, the best water pump for Ram trucks is the one the factory put on the engine, and this listing makes that choice easy without a trip to a dealer parts counter.

The listing itself says little about the gasket, bearing or seal design, so read the product details for what comes in the box and buy a gasket separately if one is not included. It is aimed at the later HEMI, not the 2003 to 2008 trucks, so run your year, model and engine through the Amazon fit checker first.

View Mopar 68346912AA on Amazon

vibrant autumn street scene with golden ginkgo trees and pedestrians walking along the road

3. ACDelco Gold 252-995 Engine Water Pump: Coated Seals and Heat-Treated Shaft

ACDelco Gold 252-995 product photo
Key features
  • All Makes pump for GM and non-GM vehicles
  • Tested for leak-free performance
  • Coated seals for seal longevity
  • Heat-treated shaft and sealed bearings

ACDelco is best known for GM parts, but its All Makes line also covers many other brands, and the Gold 252-995 is one of those. Listings for the Gates 43559 pump include 252-995 among the numbers it replaces, so this ACDelco unit sits in the same group as the other 2009 and later HEMI picks here.

ACDelco says the pump is tested for reliable, leak-free running. The seals carry a coating meant to help them last, and the shaft assembly is heat-treated for extra strength compared with an untreated shaft. The bearings are permanently sealed and lubricated, so there is nothing to grease once it is installed and the belt is back on.

That combination makes sense for a truck that does a lot of stop-and-go driving or long idles, where heat and constant rotation wear on the seal. Owners who already run ACDelco filters or plugs may prefer keeping the brand consistent. The listing title is generic, so lean on the Amazon fit checker and compare the old pump side by side before you start, and skip it for a 2003 to 2008 truck or any engine other than the 5.7L.

View ACDelco Gold 252-995 on Amazon

4. WJB WU6341 Engine Water Pump: Replaces AW6341 and Gates 43559

WJB WU6341 product photo
Key features
  • Cross-references AW6341, US6341, WP-2253, 43559
  • Pre-tested for fit and function
  • Sealed bearings with unitized seal
  • Precisely machined mounting surfaces

WJB is an aftermarket parts brand, and its WU6341 is sold as a direct alternative to a familiar group of later HEMI pumps. The title cross-references the Airtex AW6341, US Motor Works US6341, ASC WP-2253, Gates 43559 and GMB 120-4430, so if any of those numbers match your old part, this one should share the same mounting pattern and hub.

The body is corrosion-resistant cast iron or aluminum, and WJB says each pump is pre-tested for fitment and function before it ships. Inside, permanently sealed bearings work with a unitized seal that needs no service. The mounting faces and contact areas are machined to set dimensions, which helps the gasket seal evenly against the engine.

WJB also points to smooth internal passages and even wall sections to keep coolant moving well. It is a sensible option for a DIY owner who wants a cross-referenced design without paying for a premium brand name, or for an older high-mileage truck that just needs a sound replacement. Check the exact fit for your Ram on Amazon and look over the old pump first, because this design is meant for the 2009 and newer 5.7L, not earlier trucks.

View WJB WU6341 on Amazon

gloved hands using a drill to install a power outlet on a wall

5. Airtex AW7168 Engine Water Pump: 2003-2008 HEMI Fit with Gaskets Supplied

Airtex AW7168 product photo
Key features
  • Replaces 53021380AG to 53021380BB
  • Upgraded composite impeller
  • All gaskets and seals supplied
  • Limited lifetime warranty

Airtex has been making water pumps for a long time, and the AW7168 covers the first-generation 5.7L HEMI. Its title lists Mopar numbers from 53021380AG through 53021380BB, plus ACDelco 252-874 and 252-963, and other sellers match AW7168 to 2003 to 2008 Ram 1500, 2500 and 3500 trucks with the 5.7L. For owners of those earlier trucks, it fills the gap the other picks leave open.

The pump is built for belt-driven setups that use a fan clutch, and Airtex suggests replacing the clutch at the same time as the pump. That is practical advice, because a worn clutch can put an uneven load on a fresh bearing. Airtex fits an upgraded composite impeller and puts every gasket and seal needed for the job in the box.

Airtex backs the pump with a limited lifetime warranty, which some owners like on a truck they plan to keep. It suits an older work truck or a family hauler that has reached the age where cooling parts start to give out. It will not fit a 2009 or newer HEMI, so confirm your year, model and engine on Amazon before buying.

View Airtex AW7168 on Amazon

Side by Side: Which Pump Matches Your Truck

Narrowing down the best water pump for Ram trucks gets easier once the year range is settled. Use the table to line up each pick with the generation it targets and the buyer it tends to suit.

PumpHEMI generationNotable detailWho it suits
Gates 435592009 and laterHub ground for the OE fan clutchDaily drivers and towing trucks
Mopar 68346912AA2009 and laterFactory part numberOwners who want the original part
ACDelco Gold 252-9952009 and later (cross-listed)Coated seals, heat-treated shaftBuyers who already trust ACDelco
WJB WU63412009 and laterPre-tested, machined mounting facesBudget-minded DIY owners
Airtex AW71682003 to 2008Composite impeller, gaskets suppliedOwners of first-generation HEMI trucks
Ram 5.7 HEMI water pump picks compared by generation and build

If you are still weighing brands in general, our roundup of water pump brands covers the makers behind these parts across many engines. With the pump off, it is also a sensible moment to inspect the belt, and our serpentine belt picks for Ram trucks list options for the same engines.

peaceful autumn road lined with deciduous trees and fallen leaves

Cold Starts, Road Salt and a HEMI Cooling System

A Grand Rapids winter asks a lot of a pump seal. The federal fueleconomy.gov cold weather page notes that cold fluids raise engine friction and that an engine takes longer to reach its efficient temperature. For the pump, that means more time spinning against thick, cold coolant on every short trip across town.

Salt and slush add a second problem. Brine packs into the pulley, the fan clutch threads and the pump bolts, and by the time the job comes around those bolts can be hard to free. A spring rinse of the front of the engine and a quick look at the weep hole help you catch a leak while it is still a stain rather than a puddle.

Humid summers and heavy towing loads close out the year. Even the best water pump for Ram trucks will struggle if old coolant has turned acidic, so plan a full drain and refill with the coolant type your owner’s manual calls for.

artisan sharpens a blade on a grinder

Doing It Yourself or Booking the Job

Because the HEMI pump sits on the front of the block and runs off the accessory belt, the timing chain stays sealed during the swap. Most owners with a decent socket set, a fan clutch wrench and patience can do it in a driveway.

The parts that slow people down are the fan and shroud, a stubborn fan clutch nut and air trapped in the system afterward. If the gauge keeps climbing after a new pump, or coolant shows up inside the oil, stop driving the truck, because a hot HEMI can damage far more than a pump.

sunlit autumn road in Milwaukee surrounded by colorful foliage and peaceful forest setting

Plenty of other engines hide the pump behind a timing belt, which turns a simple swap into a bigger job. If one of your other vehicles is built that way, our timing belt and chain service in Grand Rapids covers that work, and our comparison of timing belt kit brands explains which kits bundle a pump.

Frequently Asked Questions

What is the best water pump for Ram 1500 trucks with the 5.7 HEMI?

For 2009 and newer trucks, the Gates 43559 and the Mopar 68346912AA are the strongest starting points, with the ACDelco Gold 252-995 and WJB WU6341 as alternatives. For 2003 to 2008 trucks, look at the Airtex AW7168. Confirm the fit with your full vehicle details first.

Is the 5.7 HEMI water pump driven by the timing chain?

No. The pump bolts to the front of the engine and is turned by the accessory belt, so you do not need to open the timing cover to replace it. The fan clutch usually threads onto the pump hub and comes off first.

Is a Mopar pump worth it over an aftermarket one?

The Mopar part removes any doubt about the part number, which some owners value. Established aftermarket makers such as Gates and ACDelco design their pumps around the original fit, and ACDelco says its units are tested for leaks, so either route can work well when the numbers match.

What else should I replace with a Ram water pump?

Look hard at the fan clutch, the belt, the thermostat and the coolant itself. A worn fan clutch or an aging belt can shorten the life of a new pump, and fresh coolant of the type your manual lists protects the new seal.

Seeing coolant under the front bumper of your Ram, or a temperature needle that sits higher than it used to? Ring 456 AutoFix on 616-279-3832, Monday to Friday 8am to 5pm, or reach us through the contact page to arrange a look at the truck.

Working the same hours we do? Park the pickup at 456 Carrier St NE once your day is done, use our after-hours drop-off, and add a note saying whether the leak shows up after a cold start or after a long drive.