As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A 1994-2002 Ram that darts over expansion joints or thumps when you turn into the driveway usually has loose front joints. Choosing the best ball joints for second gen Dodge trucks comes down to three details: the model year, the drivetrain and which front axle sits under the truck. A Cummins 3500 and a 1500 half-ton from the same year can take completely different parts.
We sorted six current Amazon listings by truck and position, using the years and part numbers each one names. Not sure the joints are the culprit yet? Our guide to bad ball joint symptoms covers the noises, steering feel and tire wear that point to them.
Quick answer
Which ball joints fit a second gen Dodge Ram?
For a 1994-1999 Ram 2500 or 3500 4×4, the TRQ four-piece set covers both sides. A 2000-2002 heavy duty truck takes the MOOG K7397 lower. Half-ton 4WD owners can pick the TRQ Dana 44 set or the Detroit Axle kit. Confirm year, drivetrain and axle on Amazon first.
Our Quick Picks
Three listings that cover the most common second gen Ram front end jobs. Check your year, drivetrain and front axle on Amazon before you buy.

TRQ 2500/3500 Set
A full front set for the heavy duty trucks of the early second gen years.

MOOG K7397
A MOOG lower joint for the late second gen heavy duty trucks.

TRQ Dana 44 Set
A full set for half-ton and light 2500 four wheel drive trucks.
Axle First: Dana 44, Dana 60 or Independent Front
Dodge built the second generation Ram from the 1994 model year, with the half-ton 1500 running through 2001 and the 2500 and 3500 continuing into 2002. Under that one body style sit several different front ends. Four wheel drive trucks use a solid front axle with upper and lower joints pressed into each end, while two wheel drive trucks use control arms on an independent front suspension.
On the 4x4s, the axle model matters most. The 1500 and some lighter 2500s ride on a Dana 44, and the heavier 2500 and 3500 trucks, including most diesel pickups, carry a Dana 60. Joints for one will not fit the other. Listings for the heavy duty trucks also change part numbers around the 1999 to 2000 change, so a 1998 and a 2001 diesel may need different boxes.
Before you shop, note the year, drivetrain and gross vehicle weight rating from the door sticker, since Amazon’s fit checker asks for them.
Singles, Four-Piece Sets and Greasable Joints
On a solid axle Ram, the knuckle turns on an upper and a lower joint, and both take a pounding from the weight of the engine above them. Because the teardown is the same for either joint, many owners of high-mileage trucks replace all four at once. A single joint still makes sense when only one position shows play.
MOOG explains its ball joint design features, such as a sealed boot with a grease-relief valve that lets contaminants be flushed out. Sealed, no-fitting joints avoid the chore but cannot be refreshed once moisture gets past the boot.
Best Ball Joints for Second Gen Dodge: Listings by Truck
The list runs from heavy duty 2500 and 3500 parts to half-ton and two wheel drive options, and each heading names the years and position from the listing itself.
1. TRQ Upper and Lower Ball Joint Set: 4-Piece Kit for 1994-1999 Dodge Ram 2500 and 3500

- Two upper and two lower front joints
- Listed for 1994-1999 Ram 2500 and 3500
- Cross-references K7205T, K7206T and K7269
- Limited lifetime warranty per listing
This TRQ kit packs both front uppers and both front lowers for the 1994-1999 Dodge Ram 2500 and 3500, which covers most of the early Cummins diesel trucks. Its reference list includes the MOOG K7205T, K7206T and K7269 numbers along with several Mopar part numbers, so you can line it up against a parts counter quote or the joints already on the truck.
Buying four joints in one box makes sense on a solid axle truck, because the knuckle has to come off to reach either joint and the labor is nearly the same for one or four. TRQ describes the parts as pre-assembled direct replacements for the original equipment, and the listing points to the Amazon Garage confirmed fit tool and a compatibility chart. TRQ also publishes install videos, which can help if this is your first front axle job. The listing mentions a limited lifetime warranty against defects in materials and workmanship.
The listing does not say whether these joints take grease fittings, so check the photos if you plan to service them. It does not cover 2000-2002 trucks, the half-ton 1500, or two wheel drive versions with independent suspension. Confirm year, axle and weight rating on Amazon before buying.
View TRQ 2500/3500 Set on Amazon
2. MOOG K7397: Front Lower Ball Joint for 2000-2002 Dodge Ram 2500 and 3500

- Front lower position
- Listed for 2000-2002 Ram 2500 and 3500
- Replaces 5015114AA and JBJ891
- Sold as a single joint
The MOOG K7397 is a front lower ball joint for the late second gen heavy duty trucks. Its compatibility line names the 2000-2002 Dodge Ram 2500 and the 2000-2002 Ram 3500, which takes in the 24-valve Cummins years. The title lists a long run of cross-reference numbers, including Mopar 5015114AA and TRW JBJ891, which helps when you are comparing brands or matching a shop quote.
The lower joint carries a large share of the front end weight on these trucks, and on a diesel that is a lot of load. MOOG, a DRiV brand, describes the part as built to handle road stress and help restore steering stability and alignment. Since MOOG is one of the brands shops reach for first on chassis work, the number is easy to find in catalogs and the joint is a common choice for a like-for-like swap on one side.
This is one joint, so you need a second for the other side, plus uppers if they are loose too. It does not fit 1994-1999 trucks or the 1500. Confirm the exact year, drivetrain and axle in Amazon’s fit checker, then plan on an alignment afterwards.

3. MOOG K7206T: Front Upper Ball Joint for 1994-1999 Dodge Ram 1500, 2500 and 3500

- Front upper position
- Listed for 1994-1999 Ram 1500, 2500 and 3500
- Replaces 52037674 and TC1650
- Sold as a single joint
The MOOG K7206T is a front upper ball joint, and its compatibility line names the 1994-1999 Dodge Ram 1500, 2500 and 3500. It is also one of the numbers the TRQ heavy duty set above cross-references, which suggests it fills the upper position in that kit. The bullet does not split coverage by drivetrain or axle, so the fit checker matters more than usual with this one.
A single upper is the right buy when an inspection finds play at the top of one knuckle while the lower and the other side are still tight. The title lists Mopar 52037674 and several other references, so you can compare it with the part you pull out. MOOG describes the joint as made to restore steering stability and support proper alignment, and the K-series numbers are widely stocked, which helps if you need a matching second joint later.
This part will not help a two wheel drive truck that needs the independent front uppers, and it is not a full kit. Enter your year, cab, drivetrain and axle on Amazon before you order, and book an alignment when the job is done.
4. TRQ Upper and Lower Ball Joint Set: 4-Piece Kit for 1994-1999 Ram 1500 4WD and 2500 Dana 44

- Two upper and two lower front joints
- Listed for 1994-1999 Ram 1500 4WD
- Also lists 1994-1999 Ram 2500 4WD Dana 44 (7500 lb GVW)
- Cross-references K3134T, K7208T and K8195T
This TRQ set is the Dana 44 counterpart to the heavy duty kit above. It contains two front uppers and two front lowers for the 1994-1999 Dodge Ram 1500 four wheel drive and the 1994-1999 Ram 2500 four wheel drive with the Dana 44 axle and a 7500 lb gross vehicle weight rating. That weight rating detail is the key to telling a light 2500 apart from the Dana 60 trucks.
The reference list includes the MOOG K3134T, K7208T and K8195T numbers and a Mopar part number, so you can match it against the joints on the truck. TRQ describes the parts as pre-assembled direct replacements that need no modification, and the listing points buyers to its confirmed fit tool and compatibility chart. Because it covers both sides, it suits a truck with unknown history or one where both knuckles show play. The listing mentions a limited lifetime warranty.
It does not fit Dana 60 trucks, 2000-2002 models or two wheel drive versions. Grease fittings are not mentioned in the text, so check the photos. Read the weight rating on your door sticker and confirm fit on Amazon before you buy.
View TRQ Dana 44 Set on Amazon

5. Detroit Axle 4WD Front Ball Joints: 4-Piece Upper and Lower Set for 1994-1999 Dodge Ram 1500

- Two upper and two lower front joints
- Listed for 1994-1999 Ram 1500 4WD
- Impact, wear and fatigue testing per listing
- 10-year warranty per listing
The Detroit Axle 4WD kit is a second option for the half-ton four wheel drive Ram. The listing names the 1994-1999 Dodge Ram 1500 4WD and includes two front upper and two front lower ball joints, so it replaces every joint on the front axle in one order. That makes it a practical pick for a truck you just bought with no service records.
Detroit Axle is a Michigan company that sells complete chassis kits, and it says its suspension components go through impact, wear and fatigue testing. The listing also mentions a 10-year warranty. Compared with the TRQ Dana 44 set, this kit lists only the 1500, so owners of a light 2500 should look at the TRQ listing instead. Both kits take the same approach of replacing all four joints at once, which keeps the wear even from side to side and avoids taking the axle apart twice.
The listing does not say whether the joints are greasable. It does not cover 1994-1999 heavy duty trucks, 2000 and later models or two wheel drive trucks. Confirm the year and drivetrain on Amazon before buying, and have the front end aligned afterwards.
View Detroit Axle 1500 4WD Set on Amazon
6. Detroit Axle 2WD Front Upper Ball Joints: Pair for 1994-1999 Dodge Ram 1500

- Two front upper joints
- Fits 2WD models only
- Listed for 1994-1999 Ram 1500 2WD
- 10-year warranty per listing
Two wheel drive second gen Rams use an independent front suspension with control arms instead of a solid axle, so they need different joints. This Detroit Axle pair covers the front uppers on the 1994-1999 Dodge Ram 1500 2WD. The listing also names 1994-1999 Ram 2500 2WD and Ram 3500 2WD trucks with independent suspension, and it states plainly that it fits two wheel drive models only.
On these trucks the upper joints sit in the upper control arms and are often the first part to develop play, especially on a truck that has carried heavy loads in the bed. Buying them as a pair keeps both sides even. Detroit Axle lists a 10-year warranty and describes its parts as built for the demands of cars, trucks and SUVs. If the lower joints or control arm bushings are also worn, you will need to source those separately, since this box holds only the two uppers.
It will not fit any four wheel drive truck, and it is not a lower joint. Check that your truck is a two wheel drive model with independent front suspension, confirm the year on Amazon, and book an alignment after the swap.
View Detroit Axle 2WD Uppers on Amazon
Second Gen Ram Fit Table
This table reflects what each listing says, and it is not a promise that a part suits every cab, axle and weight rating in those years.
| Truck and years | Front end | Position | Listing to check |
|---|---|---|---|
| 2000-2002 Ram 2500 and 3500 | Heavy duty | Front lower | MOOG K7397 |
| 1994-1999 Ram 1500, 2500 and 3500 | Confirm axle on listing | Front upper | MOOG K7206T |
| 1994-1999 Ram 2500 and 3500 | Heavy duty | Upper and lower, both sides | TRQ four-piece set |
| 1994-1999 Ram 1500 4WD, 2500 4WD Dana 44 | Dana 44 | Upper and lower, both sides | TRQ Dana 44 set |
| 1994-1999 Ram 1500 4WD | Dana 44 | Upper and lower, both sides | Detroit Axle 4WD set |
| 1994-1999 Ram 1500 2WD | Independent front | Front upper pair | Detroit Axle 2WD uppers |

Diesel Weight, Road Salt and the Rest of the Steering
A Cummins puts a lot of iron over the front axle, so the joints on a diesel 2500 or 3500 work harder than those on a gas half-ton. Owners shopping for the best ball joints for Dodge 2500 diesel trucks should plan on checking them at every tire rotation once the truck passes high mileage.
West Michigan roads add salt brine and freeze-thaw potholes to that load. Brine creeps past cracked boots, and a hard pothole hit can knock a tired joint loose in one winter. Our list of pothole damage signs covers the other parts worth a look after a jarring impact.

Loose ball joints are rarely the only worn part on a truck this age. A sloppy track bar, worn tie rod ends or a tired steering damper can all add to wander and shimmy, so check them while the front end is apart. Our pick of tie rod ends for Ram pickups covers the steering linkage, and worn shocks speed up joint wear too, which our guide to shocks and struts for daily drivers explains.
Doing the Job at Home or at Our Shop
Swapping joints on a second gen 4×4 means pulling the hubs and knuckles, then pressing the old joints out of the axle ends. A C-frame press with adapters sized for the truck is close to essential, and our review of the ball joint press for Ram trucks goes through the options. Torque every fastener to Dodge’s figure and fit new cotter pins.

Even the best ball joints for second gen Dodge front ends need a proper install and an alignment afterwards, since new joints can shift camber and caster. If you would rather hand the job off, our suspension and steering repair in Grand Rapids covers joint checks, replacement and the linkage inspection that goes with it. For other makes and models, our main roundup of ball joints for cars, trucks and SUVs is the place to start. Hendrick Hoffman, our owner and head mechanic, is ASE and State of Michigan certified for steering and suspension repairs.
More Buying Guides
Frequently Asked Questions
Do 1998 and 2001 Ram 2500 diesels use the same ball joints?
Often not. Listings for the heavy duty trucks change numbers at the 2000 model year, so MOOG names the K7397 lower for 2000-2002 trucks while 1994-1999 sets reference different parts. Enter your exact year in Amazon’s fit checker.
Does a 1500 4×4 take the same joints as a 3500?
No. Most second gen 1500 4x4s use a Dana 44 front axle, while the 3500 and heavier 2500s use a Dana 60 with bigger joints. Some lighter 2500s share the Dana 44, which is why the TRQ set lists a weight rating.
Should I replace all four joints on a second gen 4×4?
On a high-mileage truck it usually saves labor, because the knuckle comes off either way. If only one joint has play and the rest are tight with good boots, a single replacement is reasonable.
Is an alignment needed after new ball joints?
Yes. Pressing in new joints can change camber and caster on a solid axle truck, so get the front end aligned afterwards to keep it tracking straight and to save the tires.
Old Ram wandering across the lane or knocking over every crack? Ring 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or reach us online to book a front end inspection.
Busy until after five? Our after-hours drop-off lets you leave the truck at 456 Carrier St NE, Grand Rapids, MI 49505 at a time that suits you.
