456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Wandering Pickup? Choosing the Best Tie Rod Ends for Ram 1500 and 2500

best tie rod ends for ram: old blue and red pickup truck with a metal cage parked on a gravel road

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Ram that wanders on the highway, clunks when you turn into a driveway or wears the inside edges of its front tires often has a tired tie rod somewhere in the steering. Picking the best tie rod ends for Ram trucks starts with one question: is yours a half-ton 1500 with a steering rack, or a 2500 or 3500 with a solid front axle and a long linkage?

This guide splits the two layouts, explains what to check before you order and walks through six listings that name specific Ram years. If you want brand basics that cover every make, our general guide to choosing tie rod ends for any car is the place to start.

Quick answer

Which tie rod ends should I buy for my Ram?

Match the part to your generation, drivetrain and position first. For a 2013-2018 Ram 1500, MOOG sells separate outer and inner rods, and Detroit Axle bundles both sides with boots. A 2003-2013 Ram 2500 takes a full tie rod assembly such as MOOG DS800981A. Check Amazon’s fit tool, then get an alignment.

Our Quick Picks

Three listings that cover the usual Ram jobs: a single outer end for the half-ton, a full rack linkage kit and a complete tie rod for the older heavy-duty trucks.

MOOG ES801123 product photo
Half-ton outer

MOOG ES801123

Outer tie rod end

A MOOG outer end for the fourth-generation Ram 1500 and the Classic that followed it.

Suits2013-2018 Ram 1500 and 2019-2023 Ram 1500 Classic owners
View on Amazon →
Detroit Axle 6pc Tie Rod Kit product photo
Full kit

Detroit Axle 6pc Tie Rod Kit

Inner and outer, both sides

Both sides of the half-ton rack linkage plus new boots in one box.

SuitsHigh-mileage 2013-2018 Ram 1500 trucks
View on Amazon →
MOOG DS800981A product photo
Heavy-duty OE-style

MOOG DS800981A

Tie rod assembly

A complete MOOG tie rod for the solid-axle heavy-duty trucks.

SuitsStock-height 2003-2013 Ram 2500 and 3500 4×4 trucks
View on Amazon →

Two Steering Layouts Under One Ram Badge

Most Ram 1500 pickups from 2006 on use independent front suspension with a rack-and-pinion steering gear. Each side has an inner tie rod that threads into the rack under a rubber bellows, plus an outer end whose tapered stud sits in the steering knuckle. These are the parts that loosen first on a half-ton that sees daily commuting.

The 2500 and 3500 four-wheel-drive trucks are built differently. They carry a solid front axle, so a long tie rod spans from one knuckle to the other and a drag link connects it to the steering box. On these trucks you usually buy the tie rod as a complete assembly with ends and an adjuster already fitted, rather than one small joint at a time.

Generation matters too. The 2013-2018 Ram 1500 and the Ram 1500 Classic share many steering parts, while the 2019-and-up body uses its own numbers, and heavy-duty trucks split around 2013-2014.

What to Check Before You Order

These details save a second trip under the fender:

  • Exact year and body: a 2019-2023 Ram 1500 Classic is not the same truck as a 2019 Ram 1500 on the new body.
  • Drivetrain and lug count: 2WD, 4WD, 5-lug and 8-lug versions can take different parts.
  • Inner, outer or assembly: a rack truck needs individual ends; a solid-axle 2500 usually needs the whole bar.
  • Lift or big tires: stock steering parts are sized for factory height and tire size.

Grease fittings, boots and hardware vary from one part number to the next, even inside a single brand. Look at the listing photos and the box contents before you assume a fitting or a new castle nut is included. Upgrade makers publish their own guides, such as the Kryptonite Ram install instructions, worth reading before the truck goes up.

Best Tie Rod Ends for Ram 1500 and 2500: Our Picks

Each part number is an example for the Ram years its Amazon listing names. Trim, drivetrain and build date can change the number, so use Amazon’s fit checker first.

1. MOOG ES801123: Outer Steering Tie Rod End for 2013-2018 Ram 1500

MOOG ES801123 product photo
Key features
  • Outer tie rod end, sold singly
  • Listing names 2013-2018 Ram 1500
  • Also lists 2019-2023 Ram 1500 Classic
  • Replaces Mopar 68185640AA

MOOG ES801123 is an outer steering tie rod end, and its Amazon listing names the 2013 to 2018 Ram 1500 along with the 2019 to 2023 Ram 1500 Classic. The listing also gives the Mopar number it replaces, 68185640AA, which helps when you are matching an old part you have already pulled. Treat it as an example part number for a very common half-ton rather than a fit for every Ram.

MOOG is a DRiV brand, and the listing describes this end as built to support accurate wheel movement and steady steering response, with protective features meant to keep road debris, moisture and grit out of the joint. MOOG’s design details, such as greaseable sockets, vary by part number. Check the listing photos for the castle nut, cotter pin and any grease fitting before the truck is in the air.

This end suits owners who have found play at the knuckle on one side and want to replace just that joint. Outer ends are usually the first piece to wear on these trucks because they sit right in the road spray. Confirm year, cab, drivetrain and side with Amazon’s fit checker, and book an alignment once it is in.

View MOOG ES801123 on Amazon

2. MOOG EV800958: Inner Steering Tie Rod for 2013-2018 Ram 1500

MOOG EV800958 product photo
Key features
  • Inner tie rod, threads into the rack
  • Listing names 2013-2018 Ram 1500
  • Also lists the Ram 1500 Classic
  • Pairs with the ES801123 outer end

MOOG EV800958 is the inner tie rod that screws onto the end of the steering rack, and its listing names the 2013 to 2018 Ram 1500 plus the Ram 1500 Classic. The bullet list gives Classic years through 2022 while the title runs to 2024, so let Amazon’s fit checker settle the exact years for your truck. It is the natural partner for the MOOG ES801123 outer end above.

The listing copy matches the rest of the MOOG range: a steering joint built for accurate wheel movement and consistent response, with protective features against moisture and contaminants. Inner rods live under the rubber rack boot, so they last as long as that boot stays sealed. If the old boot is split or brittle, replace it during the job, because a new inner rod in a torn boot will not stay clean for long.

This part makes sense when you squeeze the boot, rock the wheel and feel movement at the rack end rather than at the knuckle. Removing an inner rod usually takes a dedicated inner tie rod tool, which is worth knowing before you start. It does not suit the 2019-and-up Ram 1500 on the new body, which uses different numbers.

View MOOG EV800958 on Amazon

heavy truck driving through snowy mountain road during winter snowfall

3. Detroit Axle 6pc Front Tie Rod Kit: Inner and Outer Ends with Boots for 2013-2018 Ram 1500

Detroit Axle 6pc Tie Rod Kit product photo
Key features
  • 2 inner and 2 outer tie rods
  • 2 rack and pinion boots included
  • Listing names 2013-2018 Ram 1500
  • 10-year warranty per listing

The Detroit Axle 6-piece kit bundles four tie rods and two rack boots for the front of a 2013 to 2018 Ram 1500. That means both inner rods, both outer ends and fresh bellows to cover the inner joints, so you can renew the whole rack linkage in one session. As with any kit, confirm your exact year, cab and drivetrain with Amazon’s fit checker before ordering.

For the Ram kit, Detroit Axle cites impact, wear and fatigue testing, and the listing quotes 10 years of warranty cover. The included boots are a practical touch, since a cracked boot is often what let the original inner rods wear in the first place. Having matched parts for both sides also keeps the job simple when you set the new rods to length.

This kit suits a high-mileage half-ton where one joint is clearly loose and the others are not far behind. Replacing everything at once means a single alignment instead of two, and you only fight rusted jam nuts once. It is more parts than you need if only one outer end has play, and it is listed only for the 2013 to 2018 generation.

View Detroit Axle 6pc Tie Rod Kit on Amazon

4. Mevotech GS25706: Front Inner Tie Rod End for 2006-2012 Dodge Ram 1500

Mevotech GS25706 product photo
Key features
  • Front inner tie rod end
  • Listing names 2006-2012 Dodge Ram 1500
  • Protective surface treatment
  • Designed to meet or exceed OE specs

Mevotech GS25706 is a front inner tie rod end, and its Amazon listing names the 2006 to 2012 Dodge Ram 1500. That covers the late third-generation trucks, many of which are now well past the mileage where steering joints start to loosen. Treat it as an example part number, since 4WD, 2WD and wheel setup can all change the correct part, and confirm fit on Amazon before buying.

Mevotech is a Canadian chassis parts maker, and its listing describes this part as designed to meet or exceed OE specifications for fit, form and function. It also mentions a protective surface treatment to slow rust build-up and quality control checks on each part. That rust protection is useful on trucks that have spent years on salted roads.

This inner rod suits owners of older half-tons who have already found play under the rack boot and want a straightforward OE-style replacement. Pair it with a new boot if the old one is cracked, and check the outer end on the same side while everything is apart. It does not fit the 2013-and-later Ram 1500, which uses the MOOG and Detroit Axle parts listed above.

View Mevotech GS25706 on Amazon

detailed shot of mechanical gears

5. MOOG DS800981A: Tie Rod Assembly for 2003-2013 Ram 2500 and 3500

MOOG DS800981A product photo
Key features
  • Complete tie rod assembly
  • Listing names 2003-2013 Ram 2500/3500
  • MOOG part number DS800981A
  • Knuckle-to-knuckle solid-axle rod

MOOG DS800981A is a complete tie rod assembly, and its Amazon listing names the 2003 to 2013 Ram 2500 and 3500. On these solid-axle trucks the tie rod runs from one steering knuckle to the other, so buying it as an assembly saves you from building one out of separate ends and an adjuster. The listing itself is brief, so confirm drivetrain and fit in Amazon’s checker before ordering.

The listing gives little beyond the part number, maker and fitment, so look at the photos and the MOOG catalog for the ends and adjuster that come fitted. A pre-assembled rod still needs to be set to length during installation, and the drag link that feeds it should be checked at the same time. Worn ends on either piece can let the front wheels shimmy after a bump.

This assembly suits owners of stock-height heavy-duty Rams who want an OE-style replacement from a widely stocked brand. Plow trucks and work trucks in this age range often need one by now. If your truck is lifted or runs much larger tires, a heavier aftermarket rod may suit it better, and it does not fit the 2014-and-later trucks.

View MOOG DS800981A on Amazon

6. Kryptonite KRDTR14: Heavy-Duty Tie Rod for 2014-2022 Ram 2500 and 3500 4×4

Kryptonite KRDTR14 product photo
Key features
  • Heavy-duty aftermarket tie rod
  • Listing names 2014-2022 Ram 2500/3500
  • For 4×4 trucks only
  • Part number KRDTR14

Kryptonite KRDTR14 is a heavy-duty tie rod, and its Amazon listing names the 2014 to 2022 Ram 2500 and 3500 with four-wheel drive. Kryptonite is an aftermarket steering and suspension brand that focuses on heavy-duty pickups, and this rod replaces the factory knuckle-to-knuckle bar on the newer solid-axle trucks. Confirm your truck in Amazon’s fit checker, since it is listed for 4×4 models only.

The listing does not give material, diameter or included hardware, so check the product photos and the maker’s install guide before you plan the job. In general, owners choose a heavier rod like this when they have leveled or lifted the truck, run larger tires or push a plow, because those loads ask more of the steering than stock parts were sized for.

This rod suits heavy-duty Ram owners who are already replacing a worn factory tie rod and want a stronger part while it is out. It is more than a stock-height truck on factory tires usually needs, where an OE-style rod does the job. Set it to length carefully, torque everything to the published figures and get an alignment before towing.

View Kryptonite KRDTR14 on Amazon

Sorting the Six Listings by Truck and Position

Find the line that matches your truck, then read that product’s notes above.

Truck named on the listingExample listingPositionMakes sense when
Ram 1500 2013-2018, 1500 ClassicMOOG ES801123Outer, sold singlyOnly the outer joint has play
Ram 1500 2013-2018, 1500 ClassicMOOG EV800958Inner, sold singlyPlay shows up under the rack boot
Ram 1500 2013-2018Detroit Axle 6pc kitInner and outer, both sides, bootsYou want the whole rack linkage fresh
Dodge Ram 1500 2006-2012Mevotech GS25706InnerOlder half-tons with a worn inner rod
Ram 2500/3500 2003-2013MOOG DS800981ATie rod assemblyStock-height heavy-duty 4×4 trucks
Ram 2500/3500 4×4 2014-2022Kryptonite KRDTR14Heavy-duty tie rodLeveled or lifted trucks on larger tires
The tie rod parts in this guide, matched to the Ram years and position each Amazon listing names

Single ends come one per box, so a two-sided half-ton job means ordering the opposite side too.

detailed photo of four stacked hex nuts against a black background

Salt, Potholes and Heavy Trucks in Grand Rapids

Michigan winters hit truck steering hard. Brine works into split boots and freeze-thaw cycles crack old rubber. Once water reaches the ball socket, the joint rusts from inside, and the play builds so slowly that many drivers get used to the wander.

Spring potholes can bend a tie rod or knock the toe out. After a hard hit, our list of signs of pothole damage to watch for covers the checks. Even the best tie rod ends for Ram trucks last longer when someone looks at the boots each spring.

big orange truck covered with frost parked on white snowy terrain near yellow house on cold winter day in subu

Worn shocks make light steering play feel worse, so see our roundup of shocks and struts for daily drivers. Half-ton owners chasing a clunk should also look at our guide to ball joints for the Ram 1500.

Doing the Job Right and When to Bring It In

Tie rods are safety parts, so support the truck on proper stands. On a Ram 1500, count the turns as you unthread the old outer end so the new one goes on close to the same length. Torque every nut to the figure in the service manual and fit a new cotter pin where the design calls for one.

aerial black and white photo of a rural intersection surrounded by farmlands

Toe changes the moment a tie rod comes off, so schedule an alignment straight after the job. On a solid-axle 2500, a loose tie rod can also feed the violent front-end shake owners call death wobble, so check the track bar, ball joints and steering damper at the same time.

Seized jam nuts and rusted tapers are where home jobs stall. We handle steering and suspension repair in Grand Rapids on domestic and foreign vehicles, Ram trucks included, and we can check the whole front end before you buy parts.

Frequently Asked Questions

Do Ram 1500 and Ram 2500 trucks use the same tie rod ends?

No. Most 2006-and-later Ram 1500 trucks use a steering rack with separate inner and outer rods, while 2500 and 3500 4×4 trucks use a solid axle with a long tie rod assembly. Order by your exact year, drivetrain and body.

Is a heavy-duty tie rod worth it on a Ram 2500?

On a stock-height truck, an OE-style assembly is usually enough. Owners who level or lift the truck, run larger tires or plow often move to a heavier aftermarket rod, but it still needs correct torque and an alignment.

How do I know if my Ram needs inner or outer tie rods?

With the front wheels off the ground, rock each tire at three and nine o’clock while someone watches the joints. Movement at the knuckle points to the outer end; movement under the rack boot points to the inner rod.

Do I need an alignment after new tie rods on my Ram?

Yes. Tie rods set the toe angle, so even a careful thread count only gets you close. Skipping the alignment can leave the truck pulling and wear new tires quickly.

Is your Ram wandering in its lane or knocking over rough pavement? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a front-end check through our contact page.

If your workday overlaps our hours, park the truck in our after-hours drop-off at 456 Carrier St NE, Grand Rapids, and leave the keys with a short note on when the steering feels loose.