As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A minivan that carries kids, groceries and a roof box spends its life near full load, and the front struts feel every pound. The best struts for Honda Odyssey vans are the ones made for your exact generation and side, because Honda changed the front strut several times between 1999 and today.
Below is one listing per Odyssey generation, plus notes on loaded versus bare struts and rear shocks. For a sedan or crossover, see our roundup of shocks and struts for everyday commuters covers those.
Quick answer
Which front struts suit a worn Honda Odyssey?
Match the part to your model year first. A loaded Unity assembly suits 2018 and newer vans, a Unity front pair covers 2011 to 2015, and Monroe’s four-piece kit renews a 2008 to 2010 van at all four corners. Older vans have Gabriel ReadyMount listings per side. Replace front struts as a pair.
Our Quick Picks
Three quick picks: a loaded Unity corner for 2018 and newer vans, a Unity front pair for 2011 to 2015 and a Monroe four-corner kit for 2008 to 2010. All six listings are reviewed below.

Unity Complete Strut, 2018-2025 Odyssey
A bolt-in passenger corner for the current-generation van.

Unity 2-11907-11908-001 Front Pair
Both front corners in one box for the fourth-generation van.

Monroe 1000190VK Four-Piece Kit
One order that renews the front struts and rear shocks together.
Five Odyssey Generations, Five Sets of Part Numbers
Every US Odyssey since 1999 rides on MacPherson struts up front, but the strut’s length, stroke and mount changed between generations, and sometimes within one.
- 1999 to 2004: the first full-size Odyssey, with shorter front struts than any later van.
- 2005 to 2007: a new, larger body and a taller strut assembly.
- 2008 to 2010: a mid-cycle refresh that uses different front strut part numbers from the 2005 to 2007 van, so listings split here.
- 2011 to 2017: the fourth generation, where some listings stop at 2015 and others run to 2017.
- 2018 and newer: the current van, still on front struts but with a compact trailing arm rear.
Honda’s own 2012 Odyssey specifications list MacPherson struts in front and a multi-link double wishbone design at the rear. That rear layout uses a separate shock absorber, not a strut. The 2018 specification sheet shows the same front design paired with the newer trailing arm rear.
Loaded or Bare, Left or Right: Buying Odyssey Struts
Three decisions narrow the field before you compare brands:
- Loaded or bare. A loaded assembly arrives with spring, top mount and bearing already fitted. A bare strut is the damper alone, so the old spring must be compressed and moved across.
- Side. Many Odyssey front struts are sold as a left or a right part, not both. A one-pack listing means a second order for the other side.
- Rear shocks. On a van with the same mileage front and rear, tired rear shocks undo some of the gain from new struts.
Bare struts cost less in parts, but the spring on a minivan is under real tension. If you go that route, read our guide to the coil spring compressors built for strut work first, and never use a tool that is not rated for the job.
Best Struts for Honda Odyssey: Six Listings by Generation
Each listing below names the Odyssey years it covers, and the side or kit contents where the maker states them. Enter your year, trim and VIN in Amazon’s fit checker before ordering, because no single part fits every Odyssey.
1. Unity Complete Strut Assembly: Front Right Loaded Strut for 2018-2025 Honda Odyssey

- Listed for 2018-2025 Honda Odyssey
- Front right (passenger) position
- Coil spring and top mount preassembled
- Lifetime limited warranty from Unity
This Unity listing is a complete front strut for the passenger side of the 2018 to 2025 Honda Odyssey, the current generation of the van. It is a single corner, so you will need the matching driver-side Unity part as well, and replacing both together keeps the front sitting level and the handling even. Confirm your year and trim in Amazon’s fit tool first.
The assembly comes with the coil spring, top mount and related hardware already fitted, which means none of your old parts are reused. Unity says this cuts installation from about four hours to under one and reduces the need for special tools, along with the risk of compressing a spring yourself. The maker describes the goal as factory-like smoothness for both short trips and long highway runs, and backs the part with a lifetime limited warranty.
This suits an owner whose newer Odyssey has crossed into high mileage and now bounces, dives under braking or clunks from a tired mount. It is a stock-height replacement only and is not meant to change the ride character, so anyone after a firmer feel should look elsewhere.
View Unity Complete Strut, 2018-2025 Odyssey on Amazon
2. Unity 2-11907-11908-001: Front Complete Strut Assembly Pair for 2011-2015 Honda Odyssey

- Listed for 2011-2015 Honda Odyssey
- Front left and right in one kit
- Factory torqued top mount and bearing
- NOK seals and phosphorus coating
Unity’s 2-11907-11908-001 kit pairs the driver and passenger front strut assemblies for the 2011 to 2015 Honda Odyssey. Buying both sides in one box saves you from matching two separate part numbers and makes sure the front corners wear at the same rate from day one. The title stops at 2015, so owners of a 2016 or 2017 van should run the fit checker rather than assume this kit covers them.
Each assembly is built as a direct-fit, OE-style replacement. The maker lists a factory torqued top mount, a premium bearing, a chrome plated strut piston and an OEM-spec coil spring, so the corner arrives ready to bolt in. Unity also points to NOK seals, an OEM-spec spring seat, a phosphorus coating against corrosion and robotic TIG welds, details that matter on a van that sees salted winter roads for years.
This kit fits an owner who wants to refresh a fourth-generation Odyssey in a single job without hunting for left and right parts. Renewing the mount and spring along with the damper also deals with the top-mount noise that older vans often develop. It is a stock replacement, not a performance upgrade, and an alignment should follow the install.
View Unity 2-11907-11908-001 Front Pair on Amazon

3. Monroe OESpectrum 72982: Bare Front Strut with Nitrogen Gas Charge for 2012-2017 Honda Odyssey

- Listed for 2012-2017 Honda Odyssey
- Bare strut, reuses your spring and mount
- Twin Technology Active Control System
- Monroe limited lifetime warranty
The Monroe OESpectrum 72982 is a bare front strut listed for the 2012 to 2017 Honda Odyssey. Unlike the loaded assemblies in this guide, it is the damper only, so your existing coil spring, top mount and bearing move across from the old strut. The listing does not name a side in its title, so check whether your van needs a left- or right-specific part, and plan to buy two for the front axle.
Monroe builds the strut around its Twin Technology Active Control System, which it says improves control while isolating impact noise and harshness. Rod displaced valving tuned to the vehicle aims for a consistent ride, and an all-weather fluid is meant to resist breakdown in temperature extremes. A PTFE-banded piston, nitrogen gas charge, chrome-plated rod and bronze reinforced rod guide round out the build, and the protective boot and jounce bumper are sold separately.
This route makes sense when the springs and mounts on your van are still sound and you, or your shop, have a compressor rated for the job. Expect a smooth, factory-type ride rather than a firmer feel. It is not the choice for anyone who wants to avoid spring work.
View Monroe OESpectrum 72982 on Amazon
4. Monroe 1000190VK: Front Quick-Strut and Rear OESpectrum Shock Set for 2008-2010 Honda Odyssey

- Listed for 2008-2010 Honda Odyssey
- Two front Quick-Struts, two rear shocks
- No spring compressor for the fronts
- Mounting hardware included
Monroe’s 1000190VK is a four-corner set for the 2008 to 2010 Honda Odyssey. It pairs two front Quick-Strut assemblies with two rear OESpectrum shock absorbers, so the whole van is renewed in one order instead of leaving worn rear shocks behind fresh front struts. The year range matters here, because 2005 to 2007 vans take different front parts, and Monroe asks buyers to use the part finder to confirm fitment.
The Quick-Strut units arrive fully assembled with the spring, mount and strut together, so the front job needs no spring compressor. Monroe says the coil springs meet or exceed the OE standard and that the assemblies use high-quality steel for structural strength. At the rear, the OESpectrum shocks use Monroe’s Twin Technology Active Control System and a self-lubricating seal that reduces friction on the piston rod, and all the hardware for the install comes in the box.
This kit is aimed at an owner whose van has the original suspension at every corner and now floats, squats under load or bounces after dips. Doing all four at once keeps the front and rear damping balanced. It is a factory-style replacement, so it will not lift or stiffen the van.
View Monroe 1000190VK Four-Piece Kit on Amazon

5. Gabriel Ultra ReadyMount G57138: Front Right Complete Strut Assembly for 2005-2007 Honda Odyssey

- Listed for 2005-2007 Honda Odyssey
- Front right (passenger) position
- 6.92 in stroke, 24.88 in extended
- Pre-assembled, no spring compression
Gabriel’s Ultra ReadyMount G57138 is a front right complete strut assembly for the 2005 to 2007 Honda Odyssey. It is a one-pack, so the driver side needs its own Gabriel part, and both sides should go in together. The listing cross-references Monroe 172536, Unity 11902 and KYB SR4522, which helps if you are comparing against a part number already on your invoice or on the old strut itself.
Gabriel publishes the dimensions on the listing: a 6.92 inch stroke, 24.88 inches extended and 17.95 inches collapsed. Those numbers are useful for confirming that you have the right generation, since the 2008 to 2010 van uses a longer-stroke strut. The assembly comes ready to install, with the spring already compressed in place, which removes the spring compressor step and shortens the job for a home mechanic.
This part suits an owner keeping an early third-generation Odyssey on the road who wants to replace a worn passenger corner with a complete unit. Fitting a new spring and mount along with the strut also restores ride height on a van that has sagged with age. It is a standard replacement, not a performance part, and an alignment is still due afterward.
View Gabriel G57138 ReadyMount on Amazon
6. Gabriel Ultra ReadyMount G57011: Front Left Strut and Coil Spring Assembly for 1999-2004 Honda Odyssey

- Listed for 1999-2004 Honda Odyssey
- Front left (driver) position
- 6.54 in stroke, 20.98 in extended
- Pre-assembled, no spring compression
The Gabriel Ultra ReadyMount G57011 is a front left strut and coil spring assembly for the 1999 to 2004 Honda Odyssey. Parts for this generation are getting harder to find in complete form, so a listing that names the van and the driver side is a useful starting point. Gabriel sells the passenger side under its own number, and both front corners should be replaced at the same time.
The listing gives a 6.54 inch stroke, 20.98 inches extended and 14.44 inches collapsed, noticeably shorter than the struts on later vans. It also cross-references Monroe 171598, Unity 11661 and KYB SR4072, handy if your old strut still shows a readable number. The unit is pre-assembled with the spring and mount, so it goes in without a spring compressor.
This assembly fits an owner who wants to keep an older Odyssey running safely for a few more years without rebuilding struts on the bench. Replacing the spring and mount along with the damper also takes care of sag and top-mount noise that two decades of driving tend to bring. It is a factory-style replacement only, so expect a stock ride and book an alignment after fitting.
View Gabriel G57011 ReadyMount on Amazon
Which Listing Fits Your Van
Use this table to narrow the best struts for Honda Odyssey vans to one listing, then confirm the part number against your VIN.
| Your Odyssey | Listing to check | Type | Watch for |
|---|---|---|---|
| 2018 to 2025 | Unity complete strut, front right | Loaded | Order the left side separately |
| 2011 to 2015 | Unity 2-11907-11908-001 pair | Loaded pair | 2016 and 2017 vans need a fit check |
| 2012 to 2017, budget | Monroe OESpectrum 72982 | Bare strut | Spring transfer; boot sold separately |
| 2008 to 2010 | Monroe 1000190VK kit | Loaded fronts plus rear shocks | Not for 2005 to 2007 vans |
| 2005 to 2007 | Gabriel G57138, front right | Loaded | Left side is a different part |
| 1999 to 2004 | Gabriel G57011, front left | Loaded | Right side is a different part |

Before you blame the struts for every sound, check the cheaper parts around them. A squeak or knock over speed bumps on an Odyssey is often a sway bar end link or a dry bushing, and our post on why a car squeaks when going over bumps walks through how to tell them apart.
How Grand Rapids Roads Wear Out an Odyssey Front End
Freeze-thaw potholes hit a loaded minivan hard, and the heavy front end takes most of each impact. Over time the damper seals wear and the van starts to float on uneven pavement.
Typical signs include a second bounce after a dip, nose dive under braking, a wandering feel on the highway and cupped wear on the front tires. Wet oil streaks down the strut body point to a leak. Our guide on how to tell if struts are bad covers the bounce test and what to look for under the van.

Road salt adds its own problem. Lower strut bolts, end link nuts and top mount studs rust in place on Michigan vans, so soak them with penetrating oil a day ahead and have new nuts on hand.
Fitting New Struts and When to Book a Shop
A loaded assembly is a reasonable driveway job with a floor jack, stands and the right sockets. A bare strut is a different matter, since the compressed front spring stores enough energy to injure you if a tool slips.
Whichever of the best struts for Honda Odyssey vans you fit, plan an alignment afterward. Removing a strut can shift camber at the knuckle, and a van left out of spec pulls to one side and wears the inner tire edges.

If you would rather hand the job off, our suspension repair service in Grand Rapids replaces struts, shocks, mounts and the links around them, then checks the steering. Our owner, Hendrick Hoffman, carries ASE and State of Michigan steering and suspension certification, and his full background is on our about us page.
More Buying Guides
Frequently Asked Questions
Are the left and right front struts on an Odyssey the same part?
Often not. Several generations use separate driver and passenger part numbers, so a one-pack listing covers only one side. Order both sides and fit them together so the van sits level.
Should the rear shocks be changed at the same visit as the front struts?
If the rear shocks have the same mileage, it is worth doing them together. Worn rear shocks let the back of a loaded van bounce and squat, which upsets the balance that new front struts restore.
Do loaded struts need a spring compressor?
No. A loaded assembly arrives with the spring, mount and bearing already installed, so it bolts in as one unit. Only a bare strut needs the factory spring compressed and moved over.
Will a 2007 Odyssey strut fit a 2009 Odyssey?
Usually not. The 2008 refresh brought different front strut numbers, so listings for 2005 to 2007 and 2008 to 2010 vans are separate. Check the year range on the listing and confirm with your VIN.
Does your Odyssey nose dive at stop signs or float after every dip? Phone 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a strut and shock inspection through our contact page.
If school runs fill your weekdays, drop the van off after hours at our shop, 456 Carrier St NE in Grand Rapids, and we will take it from there.
