456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Truck, Sedan or SUV? The Best Sway Bar End Links by Vehicle

best sway bar end links: picturesque rural road curves under a bright sky with fluffy clouds

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A knock from one front corner when you roll over a manhole cover is often the first sign of a tired stabilizer link. The best sway bar end links for your vehicle are the ones built for its exact axle and side, with a joint design that copes with the salt and potholes it drives through every winter.

Below we explain the three link designs, then review six specific listings for common trucks, sedans and crossovers. If you are not yet sure the links are the source of the noise, our guide to a clunking noise over bumps walks through the other suspects first.

Quick answer

Which sway bar end links should you buy?

Buy the listing made for your year, model, axle and side, and favor a greaseable socket if you drive on salted roads. For a 2009 to 2020 F-150 that means MOOG K750362, for a 2005 or later Tacoma the Mevotech Supreme MS86849, and for a 2007 to 2017 Camry the TRW JTS845.

Our Quick Picks

Three quick picks: a greaseable MOOG link for the 2009 to 2020 F-150, a Mevotech Supreme link for the 2005 and later Tacoma, and a TRW front link for the 2007 to 2017 Camry. All six listings are reviewed below.

MOOG K750362 product photo
F-150 pick

MOOG K750362

Socket link · front · 2009-2020 F-150

A serviceable, heavy rod link for a truck that sees salted roads.

SuitsF-150 owners who will grease the fittings
View on Amazon →
Mevotech Supreme MS86849 product photo
Tacoma pick

Mevotech Supreme MS86849

Socket link · front left · 2005+ Tacoma

A greaseable Tacoma link from Mevotech's Supreme line.

SuitsTacoma owners keeping a stock-height truck
View on Amazon →
TRW JTS845 product photo
Sedan pick

TRW JTS845

Socket link · front · 2007-2017 Camry

An OE-style front link for Toyota and Lexus sedans.

SuitsCamry, Avalon and ES owners after a quiet repair
View on Amazon →

What an End Link Does and How It Wears Out

The sway bar, or stabilizer bar, ties the left and right suspension together and twists to resist body lean in corners. The end link is the short rod that joins each end of that bar to a control arm or strut, so all of that load passes through it.

The link moves whenever one wheel rises more than the other, so its joints wear steadily. A worn socket or cracked bushing rattles, from a light tapping on rough pavement to a sharp clunk in a pothole. To check, grab the link and shake it: any knock or free play means it is due.

The same knock can also come from a worn ball joint or tie rod, so check those while you are under the car. Our posts on bad ball joint symptoms and signs of a failing tie rod show how to tell them apart.

Socket, Bushing or Hybrid: Choosing a Link Style

Replacement links come in three broad designs, and the right one is usually whatever your vehicle used from the factory. MOOG’s overview of sway bar link designs describes each style and what its parts do.

  • Ball socket links: a rod with a small ball joint at each end, common on cars and crossovers. In salt country, favor a greaseable socket.
  • Bushing or bolt links: a long bolt and sleeve with bushings and washers, common on trucks and SUVs.
  • Hybrid links: a socket at one end, a bushing at the other and a stop on the threads that sets the bushing squeeze.

Most links are sold one at a time, and some vehicles use a different part on the left and right. Order both sides together, since a fresh link on one corner and a worn one on the other still leaves you with a knock. Adjustable performance links are meant for lifted, lowered or upgraded setups, not a stock repair.

Best Sway Bar End Links: Six Listings for Common Vehicles

Each listing below is a specific part for a specific group of vehicles, and none of them fits everything. Confirm year, model, engine, drive type and side in Amazon’s fit checker before you buy, and read any notes about suspension packages or lift kits.

1. MOOG K750362: Greaseable Front Stabilizer Bar Link for 2009-2020 Ford F-150

MOOG K750362 product photo
Key features
  • Listed for 2009-2020 F-150 and Super Duty trucks
  • Greaseable socket flushes out debris
  • Sealed boot and thick connecting rod
  • Wrench flats for removal and fitting

The MOOG K750362 is a ball socket stabilizer link listed for the 2009 to 2020 Ford F-150, and the listing also names several F-250 through F-550 Super Duty years. Parts retailers place it at the front of the truck and sell it one link at a time, so order two for the axle. One retailer notes it does not suit the F-150 SVT Raptor, which is a good reason to enter your full year, cab, drive type and trim in the fit checker first.

MOOG builds this link around a greaseable socket. Pumping in fresh grease pushes old lubricant and grit out past the joint, and a sealed boot keeps water away from the bearing surfaces in between. The connecting rod is thick, the bearings are metal with a rubber preload, and wrench flats on the body give you something to hold while the nut is turned.

This part suits a work truck or daily-driven F-150 that spends winters on brine and gravel and has an owner willing to grease it at tire rotations. It is a stock-height replacement, so a lifted truck with a taller suspension may need longer adjustable links instead. Check the rest of the front end at the same time, since a worn link often travels with tired bushings.

View MOOG K750362 on Amazon

2. Mevotech Supreme MS86849: Front Stabilizer Link with Sintered Bearings for 2005-2023 Toyota Tacoma

Mevotech Supreme MS86849 product photo
Key features
  • Replaces Toyota 48810-04010 and MOOG K80948
  • Patented sintered bearings
  • 180 degree SAE grease fitting included
  • Part-specific nylon locking nut

The Mevotech Supreme MS86849 is a front stabilizer link that cross-references Toyota part 48810-04010, along with MOOG K80948, Delphi TC5556 and TRW JTS905. Toyota’s own catalog lists 48810-04010 as the front left link for the 2005 and later Tacoma, so this is the driver side part, and you will need the matching right-hand link as well. Different drive types and packages can change the part, so confirm your exact truck in the fit checker before buying.

This link comes from Mevotech’s Supreme line and uses the company’s patented sintered bearings, which Mevotech says give longer-lasting performance. A 180 degree SAE grease fitting comes installed so the socket can be serviced, and the part-specific nylon locking nut is meant to speed up the installation. Mevotech also says the line goes through in-house and third-party durability testing.

This link is a sensible choice for a Tacoma that is still at factory ride height and gets driven through salty winters, trail washouts or both. Owners who grease their trucks regularly will get the most from the fitting. If your Tacoma has a lift or long-travel parts, look for links designed for that height rather than a stock replacement.

View Mevotech Supreme MS86849 on Amazon

tranquil dirt path winds through a sunlit forest

3. Suspension Dudes Front Sway Bar Link Kit: Bushing-Style Links for 2007-2020 GM Trucks and SUVs

Suspension Dudes Front Link Kit product photo
Key features
  • Listed for 2007-2020 Silverado, Sierra, Tahoe, Yukon
  • Replaces K700538 and K700432
  • Dacromet-coated hardware
  • Bushings made in the USA, bolt with thread locker

The Suspension Dudes front sway bar link kit is a bushing and bolt style set listed for 2007 to 2020 GM full-size trucks and SUVs, including the Silverado, Sierra, Tahoe, Yukon, Suburban and Escalade. It replaces the MOOG K700538 and K700432 kits. These vehicles split into several suspension and drive versions over those years, so check the listing’s fit tool and the quantity in the box against your VIN before you order.

Instead of a ball socket, each link is a long bolt that passes through the sway bar and the control arm, with a plastic OEM-style sleeve between them and bushings on either side. Suspension Dudes uses its own Code Red bushings made in the USA, coats the hardware in Dacromet for corrosion protection, and pre-applies thread-locking adhesive to the bolt so the nut is less likely to back off.

Bushing links have no socket to grease, and when they wear, the rubber is what gives out. This kit suits a GM truck or SUV that still uses the bolt-style setup and an owner who wants coated hardware for salty roads. Take care to tighten the nut evenly, since crushing the bushings too far can shorten their life.

View Suspension Dudes Front Link Kit on Amazon

4. TRW JTS845: Front Stabilizer Link for 2007-2017 Toyota Camry and 2013-2018 Avalon

TRW JTS845 product photo
Key features
  • Fits 2007-2017 Camry and 2013-2018 Avalon
  • Also listed for 2013-2018 Lexus ES350 and ES300h
  • Endurance tested to 500K cycles
  • Low friction polymer or high quality bearings

The TRW JTS845 is a front stabilizer link listed for the 2007 to 2017 Toyota Camry, the 2013 to 2018 Avalon and the 2013 to 2018 Lexus ES350 and ES300h. Those sedans share a front suspension layout, which is why one part number reaches across all of them. You still need a link for each side of the car, so order two and confirm your year and trim in the fit checker.

TRW is a long-standing supplier of original steering and suspension parts, and the listing says every link goes through four levels of testing, technical and audit review before approval. That includes endurance testing to 500,000 cycles. Depending on the application, TRW uses low friction polymer joints or high quality bearings, with materials it describes as OE quality.

This link is aimed at the owner who wants the car to feel and sound the way it did when new, rather than at anyone chasing sharper handling. It suits a high-mileage commuter sedan with a tapping noise from the front on rough pavement. If your car also has worn struts or top mounts, replace them together so you are not taking the front end apart twice.

View TRW JTS845 on Amazon

shiny metal spheres arranged in rows with reflections creating an artistic pattern

5. MOOG K750865: Greaseable Front Stabilizer Bar Link for 2016-2025 Honda Civic

MOOG K750865 product photo
Key features
  • Listed for 2016-2025 Honda Civic
  • Also lists 2019-2022 Insight and 2023-2025 Integra
  • Greaseable socket against corrosion and wear
  • Designed to improve on the OE part

The MOOG K750865 is a front stabilizer link listed for the 2016 to 2025 Honda Civic, the 2019 to 2022 Insight, the 2023 to 2025 Acura Integra and some 2020 to 2022 CR-V models. Retailers place it at the front of the car. Civics of these years come in several body styles and performance trims, so check yours in the fit checker, and buy one link for each side.

Where many factory links on compact cars are sealed, this MOOG version has a greaseable socket. Grease pushed through the fitting helps keep corrosion and wear in check by forcing out old lubricant and the grit it carries. MOOG says the part improves on the OE design and aims for quiet, dependable operation and longer life.

This is a good match for a Civic that has started tapping from the front over rough roads, especially one that sees salt each winter. It keeps the car’s stock handling, so drivers with lowered springs or an aftermarket sway bar may want adjustable links instead. When the links are off, it is also a good moment to look over the sway bar frame bushings.

View MOOG K750865 on Amazon

6. Detroit Axle Front Sway Bar Links: 2-Piece Set for 2006-2018 Toyota RAV4 and Prius

Detroit Axle Front Link Pair product photo
Key features
  • Two front links in the kit
  • Listed for 2006-2018 RAV4 and 2010-2015 Prius
  • Impact, wear and fatigue tested
  • 10-year warranty stated on the listing

The Detroit Axle front sway bar link set includes two front links in one box. The listing covers a long list of Toyota, Scion and Lexus models that share the part, including the 2006 to 2018 RAV4, the 2010 to 2015 Prius, the 2012 to 2018 Prius V, the 2017 to 2018 Corolla iM, several Scion xB and tC years and the Lexus CT200h, HS250h and NX. Confirm your model and year in the fit checker, since not every trim of these vehicles shares the link.

Having both sides in a single kit makes it easy to replace the axle as a pair, which is the right way to do this job. According to Detroit Axle, its suspension parts are tested for impact, wear and fatigue, and this listing names a 10-year warranty. Read the warranty terms on the listing so you know what it covers.

This set suits a RAV4 or Prius owner who wants to fix a front-end rattle without ordering two separate parts. It is a stock replacement for daily driving, not an upgrade for handling. On high-mileage vehicles, check the struts and lower control arm bushings while the wheels are off, because they often wear on a similar schedule.

View Detroit Axle Front Link Pair on Amazon

Match Your Vehicle to a Listing

Use this table to narrow the best sway bar end links above to your vehicle, then check the part number against your VIN.

Your vehicleListing to checkLink styleWatch for
2009 to 2020 Ford F-150MOOG K750362Greaseable socketSold singly; not for the SVT Raptor
2005 or later Toyota TacomaMevotech Supreme MS86849Greaseable socketDriver side; order the passenger part too
2007 to 2020 GM full-size truck or SUVSuspension Dudes front kitBushing and boltCheck quantity and drive type
2007 to 2017 Toyota CamryTRW JTS845Ball socketOrder both front sides
2016 or later Honda CivicMOOG K750865Greaseable socketAlso listed for some CR-V years
2006 to 2018 Toyota RAV4 or PriusDetroit Axle front pairBall socketTwo links in the box
Sway bar end link listings compared by vehicle, link style and fit notes

A creak or squeal rather than a knock often points to dry sway bar bushings instead; see why a car squeaks when going over bumps for those. Ram owners have their own list in our guide to sway bar links for Ram trucks.

curved road winding through a dense forest

Salt, Potholes and Links in West Michigan

End links sit low and close to the wheel, right where slush and brine spray off the tire. Once a boot splits, that salty water gets into the socket, and freeze-thaw potholes then hammer the loosened joint every day of the season.

A greaseable link lets you push fresh grease through to flush out water, so give each fitting a few pumps at tire rotations. Sealed links cannot be serviced, so inspect their boots each spring.

winding road through vibrant green countryside under a cloudy sky

Salt also rusts the nuts onto their studs. Soak them with penetrating oil the day before, and hold the stud with a hex key or the wrench flats so the ball does not spin.

A Driveway Job or One for the Shop?

On many cars, swapping an end link takes two nuts per side and a jack stand under each lower arm, so it is a reasonable first suspension job. Tighten the new nuts with the suspension level side to side, to the torque in your service information. Links normally do not change toe or camber, so an alignment is not usually needed for this job alone.

It becomes a shop job when nuts are seized, a stud snaps or a lifted truck needs longer links. Even the best sway bar end links only quiet the front end if the parts around them are sound. For worn struts behind the noise, see our roundup of shocks and struts for daily drivers.

scenic view of a winding road through peaceful countryside fields with blue skies

You are also welcome to let us handle it. Our suspension repair service in Grand Rapids covers end links, sway bar bushings, ball joints and tie rods. Hendrick Hoffman, our owner and head mechanic, holds ASE and State of Michigan certifications that include steering and suspension; read more on our about us page.

Frequently Asked Questions

Should I replace sway bar links in pairs?

Yes, in most cases. Both links on an axle see the same miles and weather, so if one has worn out, the other is usually close behind.

Are greaseable links better than sealed ones?

They suit salt-belt driving well, because fresh grease pushes out water and grit. They only help if someone greases them, though, while a sealed link needs no service until it wears out.

Do I need an alignment after replacing end links?

Usually not. End links do not set toe or camber, but if you replaced tie rods, ball joints or struts at the same time, an alignment is needed.

Hearing a knock from the front end every time you hit a rough patch of road? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or request an end link check through our contact page.

Can’t get away from work during our hours? Use our after-hours drop-off and leave the vehicle at our Creston shop, 456 Carrier St NE, whenever your day ends.