456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Pickup Steering Feeling Loose? The Best Tie Rods for Trucks by Model

best tie rods for trucks: breathtaking view of a coastal landscape with a sandy beach

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A pickup that drifts across the lane on the highway, or a steering wheel that needs constant small corrections, often points to a worn tie rod. The best tie rods for trucks are the ones listed for your exact model, drive type and side, with a strength level that matches how the truck is set up and used.

This guide covers midsize and Toyota pickups plus one heavy-duty kit for lifted GM trucks. If you drive a Ram, an F-150 or a Silverado 1500, our make-specific lists go deeper on those trucks, and if you are still unsure the tie rods are the problem, start with our guide to bad tie rod symptoms.

Quick answer

Which tie rods should you buy for your truck?

Match the listing to your year, model, drive type and side first. For a 2005 or later Tacoma look at MOOG ES80895, for a 2007 to 2021 Tundra MOOG ES800327, and for a lifted 2011 to 2024 GM 2500HD or 3500HD the Rough Country 11016 heavy-duty kit. Always align the truck afterward.

Our Quick Picks

Three quick picks: a MOOG outer end for the 2005 and later Tacoma, a MOOG outer end for the 2007 to 2021 Tundra, and a Rough Country heavy-duty kit for lifted 2011 to 2024 GM 2500HD and 3500HD trucks. All six listings are reviewed below.

MOOG ES80895 product photo
Tacoma pick

MOOG ES80895

Outer end · front · 2005-2023 Tacoma

A direct OE-style outer end for a stock or lightly leveled Tacoma.

SuitsTacoma owners replacing a worn outer joint
View on Amazon →
MOOG ES800327 product photo
Tundra pick

MOOG ES800327

Outer end · front · 2007-2021 Tundra

An OE-style outer end for the second-generation Tundra and Sequoia.

SuitsTundra owners with a loose outer joint
View on Amazon →
Rough Country 11016 product photo
Lifted HD pick

Rough Country 11016

Complete assemblies · pair · 2011-2024 GM HD

Bend-resistant tie rods for a lifted or hard-working GM heavy-duty truck.

SuitsLifted 2500HD and 3500HD owners
View on Amazon →

Inner Rods, Outer Ends and Truck Steering Loads

On most modern pickups with rack and pinion steering, each front wheel connects to the rack through two parts. The inner tie rod threads into the end of the rack, and the outer tie rod end bolts to the steering knuckle through a tapered stud. Between them, a threaded joint and jam nut let a technician set the toe angle.

Trucks load these parts harder than most cars: heavier front ends, larger tires, towing and gravel roads all push force through the small joints. Once a joint wears, the wheel can shift on its own, which shows up as wandering, a clunk or edge-worn tires.

The Car Care Council’s steering and suspension overview recommends having these systems checked at least once a year, usually along with a wheel alignment. To check a tie rod yourself, raise the wheel, grip it at nine and three o’clock and rock it: free play that stops when a helper holds the rod points to that joint. Our hub guide to tie rod ends for cars and trucks explains the parts in more depth.

Stock Height or Lifted: Picking the Right Strength

For a truck at factory ride height on factory-size tires, an OE-style replacement is usually the right call. Heavier parts do not make a stock truck steer any better. Whatever you choose, replace left and right together if both are worn.

Lifted trucks are a different story, which is why searches for the best tie rods for lifted trucks keep growing. Taller lifts, wider wheels and heavy off-road tires add leverage on the steering linkage, and bent factory rods are a common complaint on lifted GM heavy-duty trucks in particular. That is where a thicker, bend-resistant kit earns its place.

Best Tie Rods for Trucks: Six Listings by Model

Each listing below is built for a specific group of trucks, and none of them fits every pickup. Enter your year, model, cab, engine and 2WD or 4WD in Amazon’s fit checker before you buy, and confirm the part number against your VIN with a parts counter if anything is unclear.

1. MOOG ES80895: Outer Steering Tie Rod End for 2005-2023 Toyota Tacoma

MOOG ES80895 product photo
Key features
  • Listed for 2005-2023 Tacoma
  • Also listed for 4Runner, FJ Cruiser and GX460
  • Protective design against debris and moisture
  • OE-style direct replacement

The MOOG ES80895 is an outer steering tie rod end listed for the 2005 to 2023 Toyota Tacoma. The same listing names the 2010 to 2023 Toyota 4Runner, the 2010 to 2014 FJ Cruiser and the 2010 to 2023 Lexus GX460, which share a closely related front steering layout. It is sold as a single end, so order a second one if both sides show play.

MOOG, part of DRiV, describes the part as an OE-style replacement meant to restore steering feel close to the original. The listing points to protective features that help keep road debris, moisture and other contaminants out of the joint, which matters on a truck that spends its winters on salted roads. The tapered stud bolts to the knuckle just like the factory piece, so no modification should be needed.

This end suits a stock-height or mildly leveled Tacoma that has started to wander or wear its front tires unevenly. It is a like-for-like part, not an upgrade for a big lift with large tires. Enter your year, cab, drive type and trim in the fit checker first, check the inner rods while the wheel is off, and book an alignment straight after the swap.

View MOOG ES80895 on Amazon

2. MOOG ES800327: Outer Steering Tie Rod End for 2007-2021 Toyota Tundra

MOOG ES800327 product photo
Key features
  • Listed for 2007-2021 Tundra
  • Also listed for 2008-2022 Sequoia
  • Sealed against road debris and moisture
  • Companion part number ES800326

The MOOG ES800327 is an outer steering tie rod end listed for the 2007 to 2021 Toyota Tundra and the 2008 to 2022 Toyota Sequoia. These full-size Toyotas carry a lot of weight over the front axle, and the outer joints are often the first steering parts to loosen. MOOG also lists ES800326 for the same trucks, so check which side each number covers before you order.

Like the other DRiV steering parts, this end is designed as an OE-style replacement that brings steering response back toward factory feel. The listing describes protective features that help guard the joint against dirt, water and road contaminants. The design keeps the original mounting points and adjustment threads, so the new end threads onto the existing inner rod in the same way the old one did.

This part makes sense for a Tundra or Sequoia at stock height that tows, hauls or simply has high miles on the original steering. Owners running a tall lift and oversized tires may want a heavier aftermarket setup instead. Confirm your year, cab, bed and 2WD or 4WD in the fit checker, replace both sides if both are worn, and have the toe set right after installation.

View MOOG ES800327 on Amazon

open countryside view with a roadway under clear blue skies

3. MOOG ES801261: Outer Steering Tie Rod End for 2015-2022 Colorado and Canyon

MOOG ES801261 product photo
Key features
  • Listed for 2015-2022 Chevrolet Colorado
  • Listed for 2015-2022 GMC Canyon
  • Protective features against contaminants
  • OE-style fit and steering feel

The MOOG ES801261 is an outer steering tie rod end listed for the 2015 to 2022 Chevrolet Colorado and the 2015 to 2022 GMC Canyon. These midsize GM trucks were a popular choice for commuters and light work, and many are now reaching the mileage where steering joints start to loosen. The listing sells one end at a time, so plan on a pair if both sides are tired.

MOOG presents the part as an OE-style replacement that restores accurate wheel movement and steady steering response. Its listing highlights protection against road debris, moisture and contaminants, which helps on trucks that see salted winter roads and gravel driveways. Because it follows the factory design, it threads onto the original inner rod and uses the same knuckle mounting.

This end suits a Colorado or Canyon at stock ride height, including Z71 trims, as long as the fit checker confirms your exact year, cab and drive type. It is not intended as a heavy-duty upgrade for a large lift. If the truck also clunks over bumps, check the inner rods and ball joints while you are under it, then schedule an alignment once the new end is installed.

View MOOG ES801261 on Amazon

4. TRQ 4-Piece Tie Rod Set: Inner and Outer Tie Rods for 2019-2020 Ford Ranger

TRQ 4-Piece Tie Rod Set product photo
Key features
  • Two inner and two outer tie rods
  • Listed for 2019-2020 Ford Ranger
  • Pre-assembled direct replacement
  • Limited lifetime warranty

The TRQ tie rod set is a four-piece kit listed for the 2019 to 2020 Ford Ranger. It includes two front inner tie rods and two front outer tie rods, so both sides of the steering linkage can be renewed in one visit. The listing gives a long string of reference numbers, including Ford OE numbers, which makes it easier to cross-check the parts at a counter.

TRQ describes the components as pre-assembled and designed as direct replacements for the original equipment, with no modification needed. The company backs the kit with a limited lifetime warranty against defects in materials and workmanship, excluding normal wear. TRQ also points buyers to its library of installation videos, which helps when you are tackling inner rods for the first time.

This set suits a Ranger owner whose truck has worn joints on both sides, or one who wants to replace everything at once and pay for a single alignment. Note that the listing names 2019 and 2020 models only, so owners of later trucks should look for a listing that covers their year. Inner rods often need a dedicated tool, so plan for that before you start.

View TRQ 4-Piece Tie Rod Set on Amazon

detailed view of metalworking with a lathe in a workshop setting

5. Detroit Axle Front Outer Tie Rods: Pair for 2005-2019 Nissan Frontier

Detroit Axle Frontier Outer Tie Rods product photo
Key features
  • Two front outer tie rod ends
  • Listed for 2005-2019 Frontier
  • Also listed for Pathfinder and Xterra years
  • 10-year warranty

The Detroit Axle set includes two front outer tie rod ends listed for the 2005 to 2019 Nissan Frontier. The listing also names the 2005 to 2012 Pathfinder and the 2005 to 2015 Xterra, which share the same platform. Because both outer ends come in the box, it suits owners who prefer to replace the left and right sides together and keep the steering feeling even.

Detroit Axle says its suspension parts undergo impact, wear and fatigue testing to help ensure quality and durability, and the set carries a 10-year warranty. Those are the maker’s claims, and they give some reassurance for a value-focused part. The ends are built as direct replacements for the originals, so they thread onto the existing inner rods and bolt into the factory knuckle holes.

This pair makes sense for a high-mileage Frontier that has started to wander or show feathered tire edges, especially when both outer joints have play. It is an OE-style part, not a reinforced upgrade for a large lift. Confirm your year, cab, engine and 2WD or 4WD in the fit checker, inspect the inner rods at the same time, and plan an alignment once the work is done.

View Detroit Axle Frontier Outer Tie Rods on Amazon

6. Rough Country 11016: HD Tie Rod Kit for 2011-2024 Chevy and GMC 2500HD/3500HD

Rough Country 11016 product photo
Key features
  • Heavy-duty, bend-resistant assemblies
  • Replaces OE inner and outer tie rods
  • Listed for 2011-2024 GM 2500HD/3500HD
  • Sold in pairs

The Rough Country 11016 is a heavy-duty tie rod kit listed for the 2011 to 2024 Chevrolet Silverado and GMC Sierra 2500HD and 3500HD. It replaces the factory inner and outer tie rod assembly on each side, and the listing says it is sold in pairs. That answers a common question about the best tie rod ends for lifted trucks in the GM heavy-duty range.

Rough Country describes the assemblies as bend resistant and designed as heavy-duty replacements for the factory parts. Bent stock tie rods are a frequent complaint on lifted GM heavy-duty trucks that run large tires or see rough trails, so a stronger rod addresses the weak point directly. The kit is backed by Rough Country’s limited lifetime replacement warranty, according to the listing.

This kit suits an owner who has lifted the truck, fitted bigger tires or uses it off road and wants more strength in the steering linkage. On a stock-height work truck the factory-style parts are usually enough. Check your model year, drive type and lift height against Rough Country’s fitment notes, and have the steering aligned and centered by a shop after installation.

View Rough Country 11016 on Amazon

Which Listing Fits Your Pickup

Use this table to narrow the best tie rods for trucks above to your own pickup, then confirm the part number in the fit checker.

Your truckListing to checkWhat is in the boxWatch for
2005 to 2023 Toyota TacomaMOOG ES80895One outer endAlso listed for 4Runner and FJ Cruiser
2007 to 2021 Toyota TundraMOOG ES800327One outer endES800326 is the companion number
2015 to 2022 Colorado or CanyonMOOG ES801261One outer endOrder a pair for both sides
2019 to 2020 Ford RangerTRQ 4-piece setTwo inner, two outerListing names 2019 and 2020 only
2005 to 2019 Nissan FrontierDetroit Axle pairTwo outer endsShares fit with some Xterra years
Lifted 2011 to 2024 GM 2500HD or 3500HDRough Country 11016Two complete assembliesCheck lift height and drive type
Truck tie rod listings compared by model years, contents and fit notes

Driving something not on the table? Our guides to tie rod ends for Ram trucks, tie rod ends for Ford trucks and SUVs and Chevy tie rod ends cover the full-size half-ton trucks in detail.

rugged scenic beauty of a rocky mountain pathway leading to distant peaks

Road Salt, Potholes and Pickup Steering

West Michigan winters are hard on steering joints. Brine and slush coat the linkage from November to March, and once a rubber boot cracks, salty water works into the joint and washes out its grease. Freeze-thaw potholes then hit those loosened joints with every spring commute.

Even the best tie rods for trucks wear faster with a split boot, so inspect the boots each time the tires are rotated. A torn boot on a tight joint is an early warning worth acting on.

aerial view of a winding road cutting through dense forest near Lumut

Salt also locks the jam nut and adjusting threads together. Soak them with penetrating oil the day before, and count the turns as you remove the old end so the new one starts close to the old toe setting.

Installing Tie Rods and the Alignment That Follows

An outer tie rod end is a manageable job for a careful DIYer with jack stands, a torque wrench and a tie rod end puller. Inner rods are harder, since many need a special tool to reach the rack joint inside the boot. Use new cotter pins or the supplied locking nuts, and torque everything to the figure in your service information.

Every tie rod replacement changes toe, so plan an alignment the same week, or the new parts will chew up your tires. It is also a good time to check the rest of the front end, since worn ball joints on trucks or tired shocks often travel with old tie rods; see our roundup of shocks and struts for daily drivers as well.

picturesque view of a country road flanked by green hills and a bright blue sky

Picking the best tie rods for trucks is only half the job; seized threads or a lifted truck that needs its steering set up properly are good reasons to hand the rest over. Our suspension repair service in Grand Rapids handles tie rods, ball joints and the rest of the front end. Hendrick Hoffman, our owner and head mechanic, is ASE and State of Michigan certified in steering and suspension, and you can read about his background on our about us page.

Frequently Asked Questions

Do lifted trucks need heavy-duty tie rods?

Not always. A small leveling kit on factory-size tires usually runs fine on OE-style parts. Taller lifts, bigger tires and off-road use add leverage on the steering, and that is when a heavy-duty kit listed for your truck and lift range makes sense.

Should I replace the inner and outer tie rods at the same time?

Only if both are worn. Check each joint for play before ordering. On a high-mileage truck, doing both on each side in one visit saves a second alignment.

Is an alignment needed after new tie rods on a truck?

Yes. Replacing any tie rod changes the toe setting, even if you count the turns. Driving without an alignment can wear the tire edges quickly and leave the steering wheel off center.

Is your pickup wandering on the highway or wearing out its front tires? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or schedule a steering check through our contact page.

Working through our open hours? Bring the truck to 456 Carrier St NE in Creston and use our after-hours drop-off when your shift is done.