456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Altima Front Corners Compared: Monroe vs TRQ Struts

monroe vs trq struts: breathtaking view of a red rock canyon with a winding dirt road under a clear blue sky

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Worn front struts on a Nissan Altima rarely fail all at once. The car starts to float over highway seams, the front end thumps into potholes, and the steering feels a little vague on the way out of a turn. When owners start pricing a fix, the monroe vs trq struts decision comes up quickly, because both brands sell ready-built front corners for this sedan on Amazon.

Every part in this comparison is for the same car and the same position: the front axle of a 2013-2018 Altima sedan. Owners of other vehicles will find a broader spread of brands in our guide to shocks and struts for daily drivers.

Quick answer

Is Monroe or TRQ the smarter front strut buy for a 2013-2018 Altima?

TRQ sells both front corners as one pre-assembled set with a lifetime defect warranty, which keeps the order simple. Monroe’s Quick-Strut 172902 is sold one corner at a time but publishes more about its spring, mount and rust coating. If you are keeping your springs, Monroe’s bare OESpectrum 72902 is the third route.

Our Quick Picks

TRQ's loaded front pair and Monroe's Quick-Strut 172902 for the same 2013-2018 Altima, plus Monroe's bare OESpectrum 72902 for owners keeping their springs. Each one is covered in full below.

TRQ Front Strut Set product photo
TRQ pick

TRQ Front Strut Set

Loaded front pair, 2013-2018 Altima

Both front corners pre-assembled in a single order.

SuitsDIY owners who want one box and a long defect warranty
View on Amazon →
Monroe Quick-Strut 172902 product photo
Monroe pick

Monroe Quick-Strut 172902

Quick-Strut corner, sold singly

Name-brand loaded corner with a published mount and coating.

SuitsOwners keeping the Altima for years on salted roads
View on Amazon →
Monroe OESpectrum 72902 product photo
Bare strut option

Monroe OESpectrum 72902

Strut only, sold singly

Monroe's damper alone for cars with healthy springs and mounts.

SuitsInstallers with a spring compressor or a shop doing the job
View on Amazon →

What Each Brand Tells You Up Front

Monroe has been making ride control parts for a long time, and on this Altima it offers two very different products. The Quick-Strut is a complete corner with the spring and top mount already on it. The OESpectrum is the strut body alone, built to go back together with your existing spring and mount.

TRQ takes a narrower approach. Its listing for this car is a two-piece set of complete assemblies, and the brand leans on direct fit, a printed list of the part numbers it replaces and a large library of install videos. Neither brand gives damping curves or valving figures on Amazon, so the comparison rests on build details, packaging and warranty wording.

One detail ties the two together neatly. The TRQ listing names Monroe 172901 and 172902 among its reference numbers, alongside KYB SR4480 and SR4481. In other words, TRQ built this set to stand in for the exact Monroe corners we look at below.

Loaded corner or bare strut?

A loaded corner arrives with the strut, coil spring, spring seat, bearing plate and upper mount built into one unit. You unbolt the old corner and bolt the new one in, with no need to take a compressed spring apart. Because the mount and bearing are new too, a loaded unit also clears up the clunks and steering bind that worn top parts cause.

A bare strut costs less per corner but asks more of the installer. The old assembly has to come apart on a spring compressor, and you will usually want a new mount, boot and bump stop while it is open. That route makes sense mainly for someone with the right tools, or for a shop doing the work.

Monroe vs TRQ Struts, Listing by Listing

Each row below comes from the Amazon US listing for the 2013-2018 Altima front axle. Where a listing does not mention something, the cell says so rather than guessing.

PointTRQ front setMonroe Quick-Strut 172902Monroe OESpectrum 72902
What you getDriver and passenger loaded assembliesOne loaded cornerOne bare strut
Vehicles named2013-2018 Altima2013-2018 Altima2013-2018 Altima, 2016-2023 Maxima
Spring compressor neededNo, pre-assembledNo, fully assembledYes, reuses your spring
Build details publishedDirect-fit, reference numbersOE-calibrated spring, upper mount, salt spray tested coatingTwin Technology valving, PTFE-banded piston, all-weather fluid
Warranty in listingLimited lifetime, defects onlyNot statedLimited lifetime plus Feel the Difference Guarantee
Monroe vs TRQ struts for the 2013-2018 Nissan Altima front axle, from the Amazon US listings

The pattern is clear enough. TRQ wins on convenience, with both sides in one order, while Monroe publishes far more about what is inside its parts. A defect warranty covers a part that leaks or breaks, so neither brand promises that the ride will feel new for as long as you own the car.

Monroe vs TRQ Struts: Three Altima Front Options in Detail

The TRQ set covers both front corners, while both Monroe parts are sold singly, so plan on two boxes. The 2019 and later Altima uses different front assemblies, so check year, trim and drive type in Amazon’s fit tool before you order.

TRQ Front Strut and Spring Assembly Set: Loaded Driver and Passenger Pair for 2013-2018 Nissan Altima

TRQ Front Strut Set product photo
Key features
  • One driver and one passenger strut and spring assembly
  • Listed for the 2013-2018 Nissan Altima
  • Replaces Monroe 172901 and 172902, KYB SR4480 and SR4481
  • Limited lifetime warranty against defects

This TRQ listing is a two-piece front set: one driver side and one passenger side strut and spring assembly for the 2013-2018 Nissan Altima. Each corner arrives with the coil spring and upper mount already in place, so the job is a remove-and-replace swap rather than a rebuild. TRQ asks buyers to check fit with Amazon’s confirmed fit feature and its own compatibility chart, which is worth doing on any trim with special suspension.

The reference numbers printed on the listing include 11633, 11634, Monroe 172901 and 172902, and KYB SR4480 and SR4481, so you can match the set against the parts on your car or against a parts counter quote. TRQ describes the assemblies as pre-assembled direct replacements for the original equipment that need no modification. The brand also points buyers to its large catalog of do-it-yourself install videos.

The set is backed by a limited lifetime warranty against defects in materials and workmanship, which excludes normal wear and tear, misuse and modification. It suits an owner who wants both front corners matched in one order and plans to do the work at home. The listing gives no damping, valving or coating details, and the car still needs an alignment once the new corners are in.

View TRQ Front Strut Set on Amazon

aerial view of a winding mountain road surrounded by colorful autumn foliage and lush greenery

Monroe Quick-Strut 172902: Complete Strut, Spring and Mount Assembly for 2013-2018 Nissan Altima

Monroe Quick-Strut 172902 product photo
Key features
  • Fully assembled strut, coil spring and upper mount
  • Fits the 2013-2018 Nissan Altima
  • OE-calibrated spring to restore ride height
  • Protective coating with salt spray testing

The Quick-Strut 172902 is Monroe’s complete corner unit for the 2013-2018 Altima, combining the strut, coil spring and upper mount in one assembly. It is sold as a single part, and its partner for the other front corner is the Monroe Quick-Strut 172901. Check the Amazon Confirmed Fit bar and any qualifier notes so you know which number covers which side.

Monroe says each coil spring is calibrated to the OE design so the car returns to its original ride height and carries its weight correctly. The listing describes an application-specific mount and strut design, plus a premium upper mount meant to restore steering precision and cut noise, vibration and memory steer. Because the unit is fully assembled, no spring compressor is needed for the install.

Monroe adds that the strut uses high-quality steel with a reinforced tube and weld design, and that a protective coating is salt spray tested to resist rust. That makes the Quick-Strut a sensible match for an Altima that will keep seeing Michigan winters. The listing does not state a warranty term, so check the box or Monroe directly, and remember that two boxes are needed for the front axle.

View Monroe Quick-Strut 172902 on Amazon

Monroe OESpectrum 72902: Bare Front Strut with Twin Technology Valving for 2013-2018 Nissan Altima

Monroe OESpectrum 72902 product photo
Key features
  • Strut only, reuses your spring and mount
  • Fits 2013-2018 Altima and 2016-2023 Maxima
  • Twin Technology Active Control System
  • Limited lifetime warranty and Feel the Difference Guarantee

The OESpectrum 72902 is a bare strut, not a loaded corner, so it goes back together with the spring and upper mount already on your car. Its listing names the 2013-2018 Nissan Altima and the 2016-2023 Maxima. It suits an Altima whose springs and mounts are still sound, where only the damper has worn out. Like the Quick-Strut, it is sold one per box.

Monroe lists its Twin Technology Active Control System for control over varied roads, with rod displaced valving tuned to each vehicle on most applications. A PTFE-banded piston keeps the seal consistent, an all-weather fluid resists breakdown in temperature extremes, and a nitrogen gas charge helps reduce aeration. The listing also mentions a chrome-plated piston rod and bronze reinforced rod guide for longer service life where applicable.

The protective boot and jounce bumper are sold separately, so price those in when you open the assembly. Fitting this strut means compressing the old spring, which takes the proper tool and care. In return you get Monroe’s limited lifetime warranty and its Feel the Difference Guarantee. It is less suited to a car with a clunking top mount, where a loaded corner fixes more in one step.

View Monroe OESpectrum 72902 on Amazon

flat lay image featuring clear light bulbs and pliers on a gray surface

Which Route Suits Your Altima

Most Altima owners are not after a sportier sedan. They want a car that stops bobbing on the freeway, steers cleanly and stays out of the shop for a while, and how long you plan to keep it should steer the choice more than the brand name.

Your situationCloser matchReason
You want one order that covers both sidesTRQ front setDriver and passenger corners ship together
Keeping the Altima for many more yearsMonroe Quick-Strut 172902 and 172901Rust-resistant coating and a published mount design
Springs and mounts are still in good shapeMonroe OESpectrum 72902Replaces only the worn damper
One side is leakingAny, but do bothMixed corners dive and pull unevenly
Rear also bounces over dipsInspect the rear shocksNew fronts on tired rears still feel loose
Choosing between TRQ and Monroe front struts on a 2013-2018 Nissan Altima

Owner talk on repair forums about both brands is mixed, with most complaints centering on fit, top mount noise and the effort of shipping a heavy box back. That is anecdote rather than test data, but it is a good reminder to compare each new unit with the old one before it goes on the car.

serene coastal road and ocean view

If you want to see TRQ against another budget brand, our Detroit Axle and TRQ strut comparison on a Traverse covers a larger vehicle. For Monroe against a premium name, the KYB and Monroe matchup on a Camry looks at a similar sedan.

Fitting Front Struts on a 2013-2018 Altima

With the car on jack stands and the wheel off, the job begins by freeing the brake hose bracket, the wheel speed sensor wire and the sway bar link from the strut. Next come the two bolts that clamp the strut to the steering knuckle, and finally the upper mount nuts under the hood. Mark how the old mount sits so the new corner goes in facing the same way.

Before anything gets tightened, set the new corner next to the old one on the floor. Check the overall length, the stud pattern on the mount and the brackets for the hose and sensor wire. A part that has never been bolted on is far easier to return than one that has.

picturesque highway stretches through Montana

The bare OESpectrum route adds a step: the spring has to come off the old strut and go onto the new one. A compressed coil spring holds a great deal of energy, so read our coil spring compressor buying guide before you try it. Whichever part you fit, the strut sets the knuckle position, so book a wheel alignment once both sides are in.

West Michigan roads and the Altima front end

The Car Care Council’s vehicle systems overview notes that the suspension absorbs the energy from road irregularities such as potholes, and it lists pulling, uneven tire wear and bouncing as warning signs. Grand Rapids winters deliver plenty of that punishment. Freeze-thaw cycles open new potholes every spring, and a front-heavy sedan like the Altima takes most of the hits at the front corners.

Road salt causes the other headache. Knuckle bolts and sway bar link nuts rust in place, and link studs often spin when you try to loosen them. Spray the hardware with penetrating oil the night before, keep fresh link nuts on hand, and give some weight to a protective coating when choosing a part for a car that sees salted roads.

tranquil dirt path meandering through a serene woodland setting

The council also suggests a steering and suspension check at least once a year, usually alongside an alignment. A good moment for that is the seasonal tire swap, when you can look for oil on the strut bodies, split boots and cracked mount rubber.

When the Job Belongs at a Shop

Not convinced the struts are the issue? Not sure the old struts are done? Our guide on how to tell if struts are bad lists the signs, from bounce and nose dive to leaks and cupped tires. A squeak that shows up on speed bumps often comes from bushings or links instead, which we cover in why a car squeaks when going over bumps.

Bolts that will not budge, a sedan that pulls after the swap, or no safe place to put the car on stands are all good reasons to hand it over. Our shop handles suspension repair in Grand Rapids for foreign and domestic cars. Hendrick Hoffman is ASE and State of Michigan certified in steering and suspension work, so strut swaps and the alignment that follows are routine for us.

Frequently Asked Questions

Are TRQ struts as good as Monroe?

Neither brand publishes damping data, so there is no measured answer in the monroe vs trq struts debate. Monroe gives more detail on its spring, mount and coating, while TRQ offers a two-side set with a lifetime defect warranty. Judge them on those listed points and on fit for your car.

Do these struts fit a 2019 or newer Altima?

No. These listings name the 2013-2018 Altima, and the 2019 and later car uses different front assemblies with their own listings. Enter your exact year, trim and drive type in Amazon’s fit tool before ordering.

Why do I need two Monroe boxes?

Monroe sells each Quick-Strut and OESpectrum strut as a single part. For the Altima, the Quick-Strut comes as 172902 and 172901, one for each front corner, so order both and check the fit notes for which side each covers.

Do I need an alignment after replacing Altima front struts?

Yes. The strut clamps to the steering knuckle, so taking it off can change the wheel angles. An alignment afterward keeps the car tracking straight and protects the tires.

Altima riding rough on Grand Rapids streets? Call 456 AutoFix at 616-279-3832, Monday to Friday from 8am to 5pm, or book a suspension check through our contact page.

If your workday matches our hours, use the after-hours drop-off at 456 Carrier St NE in Creston and leave a note about the noise or bounce you are hearing.