456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Budget Loaded Struts on a Traverse: Detroit Axle vs TRQ Struts

detroit axle vs trq struts: dirt road winding through serene rural countryside at dusk with colorful sky

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A Chevy Traverse with tired front struts usually gives itself away in the driveway: the nose dips hard when you brake, the body wallows after a dip, and a knock comes up through the floor on broken pavement. Owners who want a bolt-in fix without a name-brand bill tend to land on the same two Amazon listings, which is why the detroit axle vs trq struts question gets asked so often.

To keep the comparison fair, every part below is a complete front strut assembly for the same GM crossovers: the 2009-2012 Traverse, plus the 2007-2012 GMC Acadia, 2008-2012 Buick Enclave and 2007-2010 Saturn Outlook that share its front end. For more brands across cars and SUVs, our roundup of shocks and struts for daily drivers casts a wider net.

Quick answer

Should a 2009-2012 Traverse get Detroit Axle or TRQ front struts?

Both sell a loaded front pair that bolts in without a spring compressor. Pick TRQ if you want a lifetime defect warranty and the long cross-reference list it prints. Pick Detroit Axle if a 10-year written warranty and its stated fatigue testing matter more. Either way, confirm your trim and book an alignment afterward.

Our Quick Picks

One loaded front pair from each brand for the same 2009-2012 Traverse, Acadia, Enclave and Outlook, plus Monroe's 172518 Quick-Strut as the name-brand step up. All three are covered in full below.

Detroit Axle Front Strut Pair product photo
Detroit Axle pick

Detroit Axle Front Strut Pair

Loaded front pair, Lambda crossovers

Both front corners in one box with a long written warranty.

SuitsOlder, high-mileage crossovers where cost comes first
View on Amazon →
TRQ Front Strut Set product photo
TRQ pick

TRQ Front Strut Set

Loaded front set, Lambda crossovers

Pre-assembled pair that prints the part numbers it replaces.

SuitsDIY owners who check numbers and like video guides
View on Amazon →
Monroe Quick-Strut 172518 product photo
Name-brand step up

Monroe Quick-Strut 172518

Quick-Strut corner unit, sold singly

Monroe's complete corner, and one of the numbers TRQ replaces.

SuitsOwners keeping the crossover for years on salted roads
View on Amazon →

Who Stands Behind Each Box

Detroit Axle is a Michigan parts company, and its company overview page lists a Ferndale address on 8 Mile. The page says its suspension, steering, brake and hub parts are manufactured to meet or exceed OEM standards, with durability and fitment accuracy as the stated aims. It sells strut assemblies singly, in pairs and bundled into kits with links, tie rods or rear shocks.

TRQ is a replacement-parts brand that sells heavily through online stores. Its Amazon listing says the brand has offered direct-fit parts for over 25 years and keeps a large library of do-it-yourself install videos, with new ones added each week. Like Detroit Axle, it does not present itself as a damper engineering firm, and neither listing publishes valving or damping figures.

What a loaded strut actually replaces

On these crossovers the front strut does three jobs at once. It damps the bounce of the coil spring, it holds the spring and upper mount in place, and it locates the wheel, which is why the steering knuckle bolts to it. A loaded or complete assembly arrives with the strut, spring, seat, bearing plate and top mount already built up.

That matters because the rubber and bearing parts at the top wear out alongside the strut itself. Swapping only a bare strut means reusing an old mount and compressing a heavy spring by hand. A complete unit removes both of those steps, so most of the job is unbolting and bolting back in.

Detroit Axle vs TRQ Struts on Paper

The table uses only what each Amazon US listing states for the Traverse and its sister models. If a listing is silent on a point, that cell says so instead of filling the gap with a guess.

PointDetroit Axle front pairTRQ front set
In the box2 complete struts with coil springs1 driver and 1 passenger strut and spring assembly
Vehicles named2009-2012 Traverse, 2007-2012 Acadia, 2008-2012 Enclave, 2007-2010 OutlookSame four models and years
Cross-references printedNot listedMonroe 172518, KYB SR4206, Gabriel G57109 and others
Testing claimImpact, wear and fatigue testingNot stated
Install supportNo special tool requiredPre-assembled direct fit, DIY video library
Warranty in listing10-Year WarrantyLimited Lifetime Warranty on defects, excludes normal wear
Detroit Axle vs TRQ front strut assemblies for the 2009-2012 Chevy Traverse and its GM siblings, from their Amazon US listings

On paper the two are close to mirror images. TRQ prints more about what its part replaces, while Detroit Axle prints more about how the part is tested. Read either warranty closely: a defect warranty usually covers a leaking or broken strut, not a ride that softens with age.

Detroit Axle vs TRQ Struts: The Three Traverse Assemblies in Detail

The first two listings cover both front corners in one order, while the Monroe unit is sold one at a time. Enter your year, trim and drive type in Amazon’s fit checker before buying, because the 2013 and later versions of these crossovers have their own listings with different assemblies.

Detroit Axle Front Strut Pair: Complete Strut and Coil Spring Assemblies for 2009-2012 Chevy Traverse

Detroit Axle Front Strut Pair product photo
Key features
  • Two complete front struts with coil springs
  • Listed for 2009-2012 Traverse, 2007-2012 Acadia, 2008-2012 Enclave
  • Ready to install with no special tool required
  • Impact, wear and fatigue testing, 10-year warranty

This Detroit Axle listing is a front pair of complete strut assemblies, one for each side, with the coil spring and top mount already fitted. The title names the 2009-2012 Chevrolet Traverse, 2007-2012 GMC Acadia, 2008-2012 Buick Enclave and 2007-2010 Saturn Outlook. The brand sells separate parts for the 2013 and later models, so confirm your year and trim in the fit checker before you order.

Detroit Axle says the assemblies are complete and ready to install, with no extra work or special tool needed, which means no spring compressor. The listing states that the parts go through impact, wear and fatigue testing, and it carries a 10-year warranty. It does not describe the internal design of the strut, its valving or the spring rate, so ride feel is something you judge after the install rather than from the page.

The pair suits a Traverse or Acadia with plenty of miles, where the aim is to cure bounce, nose dive and a worn top mount without a large parts bill. Getting both corners in one order also keeps the front axle matched. It is a less natural fit for owners who want published part cross-references, and you still need an alignment once it is in.

View Detroit Axle Front Strut Pair on Amazon

winding road through picturesque mountain landscape under a clear blue sky

TRQ Front Strut and Spring Assembly Set: Driver and Passenger Pair for 2009-2012 Traverse and Acadia

TRQ Front Strut Set product photo
Key features
  • One driver and one passenger strut and spring assembly
  • Listed for 2009-2012 Traverse, 2007-2012 Acadia, 2008-2012 Enclave
  • Cross-references Monroe 172518, KYB SR4206, Gabriel G57109
  • Limited lifetime warranty against defects

TRQ sells this front set as one driver side and one passenger side strut and spring assembly. Its title covers the same vehicles as the Detroit Axle pair: the 2008-2012 Enclave, 2009-2012 Traverse, 2007-2012 Acadia and 2007-2010 Outlook. TRQ asks buyers to confirm fit with Amazon’s confirmed fit feature and its own compatibility chart, which is worth doing on any trim with special suspension.

The listing prints a long run of reference numbers, including Monroe 172518, KYB SR4206, Gabriel G57109 and the GM-style 9214-0279, so you can match it against the part on your vehicle. TRQ describes the assemblies as pre-assembled direct replacements for the original equipment that need no modifications. The brand also points to its large catalog of do-it-yourself videos for help with the job.

TRQ backs the set with a limited lifetime warranty against defects in materials and workmanship, which excludes normal wear and tear, misuse and modification. That makes it a good match for owners planning to keep the crossover a while and do the work themselves. Like the Detroit Axle pair, the listing gives no damping or valving detail, and an alignment is still needed afterward.

View TRQ Front Strut Set on Amazon

Monroe Quick-Strut 172518: Front Strut and Coil Spring Assembly for 2009-2012 Traverse, Acadia and Enclave

Monroe Quick-Strut 172518 product photo
Key features
  • Fully assembled strut, spring and upper mount
  • Fits 2009-2012 Traverse, 2007-2012 Acadia, 2008-2012 Enclave
  • Application-specific spring to restore ride height
  • Protective coating with salt spray testing

The 172518 is a Monroe Quick-Strut, the brand’s complete corner unit with the strut, coil spring and upper mount already assembled. Its listing names the 2008-2012 Buick Enclave, 2009-2012 Chevrolet Traverse, 2007-2012 GMC Acadia and 2007-2010 Saturn Outlook. It is sold as a single assembly, so order two for the front axle and check Amazon’s confirmed fit bar, including any qualifier notes, before you buy.

It belongs in this comparison because TRQ’s own listing names 172518 among the parts it replaces, which makes it the natural name-brand benchmark. Monroe says each coil spring is calibrated to the OE design to restore ride height and carry the vehicle’s weight. The listing also mentions a premium upper mount meant to cut noise and memory steer, and a protective coating that is salt spray tested.

The Quick-Strut suits owners who expect to keep their three-row crossover for several more years and want a maker that publishes more about its design. The rust protection is a plus on salted Michigan roads. The listing does not state a warranty term, so check the box or Monroe before relying on coverage, and plan an alignment after fitting.

View Monroe Quick-Strut 172518 on Amazon

male craftsman focuses on his work in a sunlit industrial workshop

Matching the Box to Your Crossover

Most owners comparing these parts are not chasing a sportier ride. They want the crossover to stop bouncing, sit level and pass inspection for a few more years, and how long they plan to keep it shapes the pick more than the logo does.

Your situationCloser matchWhy
High-mileage Traverse, tight budgetDetroit Axle pairBoth corners in one box with a written 10-year term
You like to check part numbers firstTRQ setListing prints the OE-style numbers it replaces
Keeping the vehicle for many more yearsMonroe 172518Name-brand Quick-Strut with salt spray tested coating
Only one side is leakingAny, but buy twoMismatched corners pull and dive unevenly
Rear end also bouncesPrice a rear set tooFresh fronts on worn rears still feel loose
Choosing between Detroit Axle, TRQ and Monroe loaded struts for a 2007-2012 GM Lambda crossover

Owner reports on forums for both budget brands run from happy to frustrated, with complaints that cluster around fit, noisy mounts and the hassle of return shipping on a heavy box. Those stories are not measured data, but they are a good reason to inspect each assembly against the old one before you install it.

empty rural road with cars and fields under a bright blue sky

Readers who want to see how a premium brand stacks up against Detroit Axle on a smaller car can look at our KYB and Detroit Axle front strut comparison on a Prius, or the Monroe and Detroit Axle matchup on an Explorer.

Installing a Loaded Front Strut on a Lambda Crossover

The job starts with the vehicle safely on stands and the wheel off. The sway bar link, brake line bracket and wheel speed sensor wiring come loose from the strut first, then the two knuckle bolts, then the nuts under the hood that hold the top mount. Note the position of the mount before you pull the old unit so the new one goes in facing the same way.

Lay the new assembly beside the old one before you bolt anything. Compare the overall length, the mount stud pattern and the bracket for the brake hose, and stop if something does not line up. Sending back a strut you have not fitted is far easier than sending back one that has been on the vehicle.

beautiful winding road surrounded by lush greenery and ocean views

If you decide to keep your original springs and buy bare struts instead, you will need a proper tool and real care, so read our guide to choosing a coil spring compressor first. A loaded spring stores enough energy to cause serious injury. With either path, the strut locates the knuckle, so plan a four-wheel alignment once both sides are done.

Grand Rapids Roads and a Heavy Three-Row

The Traverse, Acadia and Enclave are big, heavy crossovers, and most of that weight sits over the front struts. Freeze-thaw potholes every spring and the bumps that follow a long winter put those parts to work, especially with a full load of passengers and gear.

Road salt brings a second problem: the knuckle bolts and top mount nuts can rust solid, and the sway bar link nut often spins with its stud. Soak the hardware with penetrating oil the night before, and have new link nuts on hand. Whichever brand you choose, a coating that resists rust is worth more here than in a dry climate.

winding dirt pathway in a serene rural mountainous landscape with rugged terrain

After the job, check the new assemblies each time you change over to winter or summer tires. Look for oil on the strut body, a torn dust boot or a top mount that has started to crack, and listen for new knocks on the first rough roads of the season.

Signs You Should Hand It to a Shop

Not sure the struts are the real problem? Our guide on how to tell if struts are bad covers bounce, nose dive, leaks and cupped tires. A squeak over speed bumps can come from dry bushings or links rather than the strut, which our article on why a car squeaks when going over bumps explains.

Seized knuckle bolts, a crossover that pulls after the swap or simply no room for jack stands are all good reasons to let us do it. We handle suspension repair in Grand Rapids on foreign and domestic vehicles. Hendrick Hoffman’s ASE and State of Michigan credentials cover steering and suspension, so this is everyday work for the shop.

Frequently Asked Questions

Is Detroit Axle or TRQ the better strut brand?

In the detroit axle vs trq struts choice, neither brand publishes damping data, so there is no measured winner. TRQ lists a lifetime defect warranty and the part numbers it replaces, while Detroit Axle lists a 10-year warranty and fatigue testing. Choose the warranty terms you prefer and confirm fit for your trim.

Do I need an alignment after replacing front struts on a Traverse?

Yes. The front strut bolts to the steering knuckle and helps set camber, so removing it can shift the wheel angles. An alignment after the swap protects your tires and keeps the steering straight.

Can I replace just one front strut?

It will bolt in, but a new strut beside a worn one damps differently, which can cause uneven braking dive and a pull over bumps. Replace both front corners together, which is why both budget brands sell these as pairs.

Do these struts fit a 2013 or newer Traverse?

Not these listings. They name the 2009-2012 Traverse and its sister models, and both brands sell separate front assemblies for the later years. Search for a listing that names your exact year and confirm it with Amazon’s fit checker.

Crossover still floating or clunking over Grand Rapids potholes? Call 456 AutoFix at 616-279-3832, Monday to Friday from 8am to 5pm, or set up a strut inspection on our contact page.

Working the same hours we do? Bring the Traverse to 456 Carrier St NE after closing, leave the keys in the after-hours drop-off, and tell us which corner is knocking.