As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
A low hum from the front of a Jeep that grows louder with speed, then fades in a turn, is a classic sign of a tired hub. The best wheel bearings and hubs for Jeep owners are the ones built for the exact generation, axle and ABS setup in the driveway.
This guide sorts listings by Jeep generation, from the 1990s Cherokee and Wrangler to the current JL and Gladiator, plus the 2011 to 2021 Grand Cherokee. If you are not sure the noise is a bearing yet, our article on how long wheel bearings last covers the warning signs and typical lifespan.
Quick answer
Which wheel hub should you buy for your Jeep?
Start with your generation. A 2018 or later Wrangler JL or Gladiator takes a 513423 hub, a 2011 to 2018 JK the 513369, and a 2007 to 2010 JK the 513272. Older TJ and XJ models use the 513158 or 513084. Confirm the part number by VIN before ordering.
Our Quick Picks
Three listings that cover the most common Wranglers on the road; the Grand Cherokee and 1990s Jeep picks are reviewed below.

MOOG 513423
Sealed front hub for the current Wrangler and Gladiator.

MOOG 513369
Direct-fit hub for later JK Wranglers.

Detroit Axle TJ Hub Pair
Both front hubs for a non-ABS TJ in one box.
Generation, ABS and Axle: Matching the Hub to Your Jeep
Jeep changed its front hubs several times, and the changes do not always line up with the body style. The JK is the clearest example: early 2007 to 2010 trucks use one hub, while 2011 to 2018 models switched to another with a different sensor arrangement.
Three details decide the fit. The first is the model year range, the second is whether the Jeep has ABS, and the third is the bolt pattern and flange shape that mount the hub to the steering knuckle. Older XJ and TJ hubs also came with and without ABS, and the two versions are not interchangeable.
The interchange numbers in this guide, such as 513369, are shared across many brands, which makes cross-shopping easier. Bearing maker GMB lists the signs of a worn wheel hub bearing, from rumbling and grinding to loose steering, which helps confirm the diagnosis first. Our hub guide to wheel hub assembly brands compares the main makers in more depth.
Front Hubs Versus Rear Axle Bearings on a Wrangler
Every listing here is a front hub assembly. On a Wrangler, Cherokee XJ or older Grand Cherokee, the rear wheels ride on a solid axle, and the rear bearing sits inside the axle tube on the axle shaft. That is a separate part and a separate job.
Rear axle bearings are often pressed on and off the shaft, which calls for a press and the right adapters. If you are planning that work, our roundup of a wheel bearing press kit explains which tools suit which jobs. A front hub, by contrast, bolts to the knuckle as one sealed unit.
Best Wheel Bearings and Hubs for Jeep: Six Listings by Generation
Each listing below covers a specific range of Jeeps, and none of them fits every model. Enter your year, model, trim and drive type in Amazon’s fit checker, and confirm the part number against your VIN with a parts counter before you buy.
1. MOOG 513423: Front Wheel Bearing and Hub Assembly for 2018-2023 Wrangler JL and Gladiator

- Listed for 2018-2023 Wrangler and 2020-2023 Gladiator
- Sealed bearing with quad lip seal
- Rust-resistant hub with installed studs
- Sold as a single hub
The MOOG 513423 is a front wheel bearing and hub assembly listed for the 2018 to 2023 Jeep Wrangler and the 2020 to 2023 Gladiator. It replaces the whole unit at once: the bearing, the flange and the wheel studs come together, so there are no loose bearings to press or pack. MOOG is part of DRiV, the same group behind several other chassis brands, and the 513423 number is widely used across the aftermarket for this application.
The listing describes a sealed bearing with a quad lip seal meant to keep out moisture and grit, which matters on a Jeep that sees trail mud and winter brine. The hub body has a rust-resistant finish, and the studs arrive installed. Those are practical details for a vehicle that often wears larger tires and spends time in deep puddles.
This hub suits JL and Gladiator owners who hear a growl from one front corner or feel play when rocking the tire at the top and bottom. It is sold as a single piece, so order two if both sides are worn. It will not fit a JK, which uses a different hub, so confirm your year, trim and ABS setup in the fit checker and check the part number by VIN before you buy.
2. MOOG 513369: Front Wheel Bearing and Hub Assembly for 2011-2018 Wrangler JK

- Listed for 2011-2017 Wrangler and 2018 Wrangler JK
- Sealed bearing for quiet running
- Rust-resistant hub, studs installed
- Quad lip seal against water and dirt
The MOOG 513369 is a front wheel bearing and hub assembly listed for the 2011 to 2017 Jeep Wrangler and the 2018 Wrangler JK. That year range is the key detail: Jeep changed the JK front hub for 2011, so earlier trucks need a different part. If your JK is a 2007 to 2010 model, skip this one and look at the 513272 option further down.
MOOG describes the unit as a sealed, noise-free design with a quad lip seal, a rust-resistant hub and installed studs. The bearing comes preset and ready to bolt in, which keeps the job simpler than older serviceable designs. On a JK that runs bigger tires or wheel spacers, the front hubs carry extra leverage, so a fresh, sealed unit helps restore a tight and quiet front end.
This listing fits owners of later JKs with a hum that rises with road speed, a clunk over bumps or an ABS warning tied to one front wheel. It is a single hub, not a pair. Rust on salt-belt JKs can bond the old hub to the knuckle, so plan time for removal. Check the fit checker with your exact model and drive type, and confirm by VIN.

3. Timken HA590242: Preset, Pre-Greased Front Hub Assembly, 513272 Interchange

- Replaces 513272, Chrysler 52060398AC and SKF BR930612
- Preset, pre-greased and pre-sealed
- Internally mounted wheel speed sensor
- Bolt-on installation
The Timken HA590242 is a preset, pre-greased and pre-sealed wheel bearing and hub assembly. Rather than a vehicle chart, the listing gives its cross-references: it replaces Federal 513272, Chrysler 52060398AC, SKF BR930612 and Raybestos 713272. The 513272 number is the one commonly listed for the front of the 2007 to 2010 Wrangler JK, which is why it belongs in this guide.
Timken states that the assembly has an internally mounted wheel speed sensor and an integrated heavy-duty raceway meant to reduce vibration and add stiffness. The housing is designed to shield the sensor from road debris. Installation is bolt-on, with no bearing pressing or packing needed, and Timken describes the unit as maintenance-free once it is in place.
This option suits early JK owners chasing a speed-related hum, a wobble that points to a loose hub, or an ABS fault from one front wheel. Because the listing relies on cross-reference numbers, confirm your fit carefully. Run your year and model through Amazon’s fit checker, compare the 513272 number with your parts counter using your VIN, and do not assume it fits a 2011 or later JK.
View Timken HA590242 on Amazon
4. Detroit Axle Front Wheel Bearing Hub Pair: Non-ABS, 5-Lug, for 2000-2006 Wrangler TJ

- Listed for 2000-2006 Wrangler TJ and 2000-2001 Cherokee
- Two front hubs, left and right
- 5 lugs, 3-bolt triangular flange
- Non-ABS design
This Detroit Axle kit includes two front wheel bearing hubs, one for each side, listed for the 2000 to 2006 Wrangler TJ, the 2000 to 2001 Cherokee and the 1999 Cherokee with full cast rotors, which the listing calls the second design. Buying the pair suits an older TJ where both front hubs have covered similar miles and the second one is likely not far behind.
The listing gives a 5-lug pattern, a 3-bolt triangular flange and a non-ABS design. Detroit Axle says the parts go through impact, wear and fatigue testing and lists a 10-year warranty. The non-ABS detail is important: a TJ with ABS needs a different hub, so check whether your Jeep has wheel speed sensors at the front knuckles before you order.
This kit fits TJ owners dealing with a hum, a loose wheel or uneven brake pad wear caused by hub play. It is also a sensible choice when a TJ is getting a wider front end refresh, since tie rods and ball joints are easier to reach with the hubs off. Confirm your year, ABS status and rotor design in the fit checker, then verify the part numbers by VIN.
View Detroit Axle TJ Hub Pair on Amazon

5. Timken 513084: Axle Bearing and Hub Assembly for 1990s Cherokee XJ and Wrangler

- Timken interchange number 513084
- Replaces 5252235, 53007449 and BR930014
- Complete bearing and hub unit
- Bolt-on replacement for the front axle
The Timken 513084 is a complete axle bearing and hub assembly for older Jeeps. Its listing shows cross-reference numbers, including 5252235, 53007449 and BR930014, rather than a vehicle chart. The 513084 number is widely listed for the front axles of 1990s Cherokee XJ and Wrangler models and the 1993 to 1998 Grand Cherokee, so it is the starting point for many classic Jeep owners.
As a full assembly, it replaces the bearing, flange and studs together, which saves the hassle of pressing bearings on an axle that may be decades old. Timken’s feature list stays general, pointing to a tight fit, reliable power transfer and easy maintenance. Timken is a long-standing bearing maker, which appeals to owners keeping an older 4.0-liter Jeep on the road.
This option suits XJ, YJ, early TJ and ZJ owners with a front-end hum or wheel play. Because years, ABS and rotor design vary within this group, confirm the fit carefully: enter your exact year and model in the fit checker, then match the number with your parts counter using the VIN. On a rusty older Jeep, expect the old hub to need some persuasion to come out.
6. MOOG 513324: Front Wheel Bearing and Hub Assembly for 2011-2021 Grand Cherokee

- Listed for 2011-2021 Grand Cherokee and 2022 Grand Cherokee WK
- Also listed for 2011-2023 Dodge Durango
- Sealed bearing, quad lip seal
- Rust-resistant hub with studs installed
The MOOG 513324 is a front wheel bearing and hub assembly listed for the 2011 to 2021 Jeep Grand Cherokee, the 2022 Grand Cherokee WK and the 2011 to 2023 Dodge Durango. The Grand Cherokee rides on independent front suspension rather than the solid axle of a Wrangler, but the front hub still bolts in as one sealed unit, which keeps the job straightforward.
MOOG lists a sealed bearing, a quad lip seal against water and dirt, a rust-resistant hub and installed studs. The Grand Cherokee is a heavy SUV that often tows, so the front hubs work hard, and a hum or grinding noise from one corner is a common complaint at higher mileage. Replacing the full assembly brings back a quiet, solid front end in one step.
This hub suits Grand Cherokee owners who use the vehicle as a daily driver, a tow rig or a winter family hauler. It is a single front hub; the rear uses a different part, so do not order this for a rear noise. Check your trim, drive type and model year in Amazon’s fit checker, and confirm the number by VIN before you buy, since the 2022 lineup split into two versions.
Quick Fit Chart by Jeep Generation
Use this chart to match the best wheel bearings and hubs for Jeep models above to your own vehicle, then check the number in the fit checker.
| Your Jeep | Interchange number | Listing to check | Watch for |
|---|---|---|---|
| 2018 to 2023 Wrangler JL, 2020 to 2023 Gladiator | 513423 | MOOG 513423 | Sold as a single hub |
| 2011 to 2018 Wrangler JK | 513369 | MOOG 513369 | Does not fit 2007 to 2010 JK |
| 2007 to 2010 Wrangler JK | 513272 | Timken HA590242 | Listing shows cross-references, not a vehicle chart |
| 2000 to 2006 Wrangler TJ, 2000 to 2001 Cherokee | 513158 | Detroit Axle pair | Non-ABS only |
| 1990s Cherokee XJ, Wrangler, Grand Cherokee ZJ | 513084 | Timken 513084 | Check ABS and exact year |
| 2011 to 2021 Grand Cherokee | 513324 | MOOG 513324 | Also listed for Durango |
Liberty, Compass and Patriot models use different hubs, so search by your own year and model.

Salt, Mud and Bigger Tires: What Wears Jeep Hubs Out
Jeeps in West Michigan face two kinds of trouble. Winter brine coats the front knuckles for months, and rust builds up between the hub flange and the knuckle until the old unit will not come out without a fight. Summer adds trail runs and puddle crossings that test the hub seals.
A sealed hub cannot be greased, so once water gets past the seal, the bearing starts to pit and hum. If you cross deep water often, listen for new noise in the following weeks.

Larger tires and wheel spacers are the other big factor. They move the load further out from the bearing and add leverage every time the Jeep hits a pothole. Even the best wheel bearings and hubs for Jeep builds wear faster on a lifted rig with 35-inch tires, so check front wheel play at every tire rotation.
Replacing a Jeep Hub and When to Hand It Over
On many Jeeps, a front hub swap is a bolt-on job for a careful DIYer with jack stands, a large socket for the axle nut and a torque wrench. Clean the knuckle bore, use new hardware where the service information calls for it, and torque every bolt to spec. Replace hubs as a pair if both sides have high mileage.
Rusted hubs are where the job gets hard. A unit that has fused to the knuckle can take hours of heat and force, and slipping tools can damage the axle seal or ABS wiring. Wrangler rear axle bearings add another step, since the shaft has to come out of the tube.

Finding the best wheel bearings and hubs for Jeep models is the easy part; a seized hub or a noisy rear axle is a fair reason to let a shop finish the work. Our wheel bearing replacement service in Grand Rapids covers front hubs and rear axle bearings. The wheel end ties into both the brakes and the steering, two systems in which Hendrick Hoffman, our owner and head mechanic, has earned ASE and State of Michigan credentials; you can read more on our about us page.
More Buying Guides
Frequently Asked Questions
Does a 2007 JK use the same hub as a 2015 JK?
No. The 2007 to 2010 JK is commonly listed with the 513272 hub, while 2011 to 2018 models use the 513369. Check your model year and confirm the number by VIN before you order.
Do Jeep Wranglers have rear hub assemblies?
Not in the same way as the front. Wranglers use a solid rear axle, and the rear bearing sits on the axle shaft inside the axle tube. It is a different part and usually a bigger job than a front hub.
Can a bad hub turn on the ABS light in a Jeep?
Yes, on hubs with a built-in or mounted wheel speed sensor. A loose bearing or a damaged sensor can give a weak or erratic signal. A scan tool that reads ABS codes will point to the wheel involved.
Should I replace both front hubs at once?
It is not required, but on a high-mileage Jeep the other side is often close behind. Doing both in one visit saves a second teardown, and many listings are sold as pairs.
Hearing a hum from the front of your Jeep, or feeling play in a wheel? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or book a wheel bearing check through our contact page.
Can’t get away during the workday? Our after-hours drop-off lets you leave the Jeep at 456 Carrier St NE in Creston whenever it suits you.
