456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Noisy Wheel? The Best Wheel Hub Assembly Brands and the Part Numbers Behind Them

best wheel hub assembly brands: interior of a modern workshop featuring detailed automotive machinery and equipment

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A hum that rises with road speed, a wheel that rocks when you grab it at the top, or an ABS light that comes and goes can all point to a tired hub. The best wheel hub assembly brands are the ones that publish exact part numbers, seal the bearing well and match the sensor setup your car came with.

This guide sorts the main names into tiers, then shows one example listing per brand for a common car or crossover. Not sure the hub is really the noise? Our page on wheel bearing noise symptoms and how urgent they are walks through the usual signs.

Quick answer

Which wheel hub assembly brand should I buy?

Start with the correct part number for your vehicle, axle and drivetrain, then pick the brand. Timken, SKF and MOOG supply carmakers and sell OE-grade hubs, ACDelco covers GM, and Detroit Axle and A-Premium sell budget pairs. Confirm fit in Amazon’s checker and torque the axle nut to the factory figure.

Our Quick Picks

Three example listings that cover the main brand tiers: a bearing maker's hub, a widely stocked aftermarket name and a value pair with the ABS sensor included.

Timken 513266 product photo
Bearing maker pick

Timken 513266

Timken hub assembly

A Timken hub sold against Hyundai and Kia factory part numbers.

SuitsHyundai and Kia owners who want a bearing maker's hub
View on Amazon →
MOOG 513296 product photo
Salt-belt pick

MOOG 513296

MOOG hub assembly

A sealed MOOG hub for the Altima and several Nissan siblings.

Suits2007-2018 Altima owners in snowy climates
View on Amazon →
A-Premium Elantra Rear Pair product photo
Value pair

A-Premium Elantra Rear Pair

A-Premium rear hubs

A budget rear pair for the Elantra with the ABS sensor built in.

SuitsElantra and FWD Kona owners on a budget
View on Amazon →

What a Hub Assembly Includes and Which Details Matter

Most cars built in the last twenty years use a sealed hub assembly instead of separate bearings you pack with grease. The bearing, the flange that carries the wheel studs and often the ABS encoder or sensor come as one bolt-on unit. When the bearing wears, you replace the whole thing.

Before you compare brands, check these points against your old part:

  • Position and drivetrain: front or rear, and FWD or AWD. An AWD rear hub has splines for the axle; a FWD rear hub does not.
  • ABS type: a sensor built into the hub, a magnetic encoder ring, or a tone ring read by a separate sensor.
  • Flange and lugs: the bolt pattern to the knuckle and the number of wheel studs.
  • Spline count: on driven hubs, the axle spline count has to match.

Some hubs press into the knuckle instead of bolting on. Those need a press kit and more labor, which is why our guide to the best wheel bearing press kit for home and shop use exists.

OE Suppliers, Store Brands and Budget Pairs

Hub brands fall into three rough groups. Timken, SKF (whose automotive arm now trades as SKF Vertevo), NTN, NSK and FAG make bearings for carmakers and sell aftermarket lines under their own names. MOOG and National sit in the DRiV and Federal-Mogul family, and ACDelco is GM’s parts brand that also covers other makes.

Detroit Axle, A-Premium, Dorman and similar names aim at value, often selling hubs in pairs with long written warranties. Forum owners report good and bad units from nearly every label, so even the best wheel hub assembly brands are only as good as the specific part number you buy.

MOOG describes its own range on the MOOG hub assemblies page, splitting it into premium, high-utilization truck and coated hubs. Features differ by application, so check what the listing for your number actually includes.

Best Wheel Hub Assembly Brands: Example Listings in Detail

Each listing below is an example part number from that brand for the vehicle or OE number it names. Another year, trim, drivetrain or axle can take a different number, so run your car through Amazon’s fit checker before you order.

1. Timken 513266: Preset, Pre-Greased and Pre-Sealed Hub for Hyundai and Kia

Timken 513266 product photo
Key features
  • Preset, pre-greased, pre-sealed hub
  • Replaces Hyundai/Kia 51750-2B000
  • Also replaces 51750-3J000
  • Cross-references BR930647, H513266

Timken 513266 is a wheel bearing and hub assembly that the listing describes as preset, pre-greased and pre-sealed. Rather than naming a model in the title, the listing gives the factory numbers it replaces: Hyundai and Kia 51750-2B000, 51750-2B010 and 51750-3J000, plus cross-references such as SKF BR930647 and the H513266 number used by other catalogs. Treat it as an example part number for Hyundai and Kia crossovers that use those factory hubs.

Timken has made bearings for more than a century and supplies carmakers as well as the aftermarket, which is why its name comes up first in most brand debates. A preset hub arrives with the bearing clearance already set at the factory, so you do not adjust anything during the install. The listing calls it an OE-grade replacement and gives the package weight as a little over seven pounds.

Because the title names part numbers rather than vehicles, this is the listing where the fit checker matters most. Enter your year, model, drivetrain and axle position on Amazon, and compare the old hub’s flange, stud count and ABS setup with the photos. It suits owners who want a bearing maker’s own hub and are happy to confirm the match first.

View Timken 513266 on Amazon

2. SKF BR930926: Wheel Hub Bearing Assembly for Nissan and Infiniti

SKF BR930926 product photo
Key features
  • Hub bearing assembly, sold singly
  • Lists Nissan 2017-2022
  • Lists Infiniti 2011-2021
  • QR code links to SKF instructions

SKF BR930926 is a wheel hub bearing assembly, and its Amazon title lists Infiniti applications from 2011 to 2021 and Nissan applications from 2017 to 2022. The title does not name individual models, so treat this as an example SKF part number and let the fit checker tell you whether it suits your car, position and drivetrain.

SKF has supplied bearings to the auto industry since 1907, and its automotive business now trades as SKF Vertevo. The listing says the box includes all the components needed for a complete wheel bearing replacement, and that the parts are designed to meet or exceed OE specifications. A QR code on the label opens SKF’s own installation instructions and technical details for this number.

SKF is direct about installation: the listing says the hub should be fitted by a knowledgeable mechanic using correct tooling and following both SKF’s instructions and the vehicle maker’s procedure. That makes it a good match for owners who want an OE-supplier hub and plan to follow the torque figures to the letter. If your Nissan or Infiniti is not on the fit list, look up SKF’s catalog for the right number before ordering.

View SKF BR930926 on Amazon

close-up macro view of metal ball bearings

3. MOOG 513296: Front Wheel Bearing and Hub Assembly for Nissan Altima

MOOG 513296 product photo
Key features
  • Lists 2007-2018 Nissan Altima
  • Also Maxima, Murano, Pathfinder
  • Quad lip seal against moisture
  • Replaces 40202-3JA0A, HA590252

MOOG 513296 is a wheel bearing and hub assembly whose listing names the 2007 to 2018 Nissan Altima, along with the Maxima, Murano, Pathfinder and Infiniti JX35 for various years. It replaces Nissan numbers such as 40202-3JA0A and 40202-JA100, and cross-references Timken HA590252 and SKF BR930745. Use it as an example part number for one of the most common mid-size sedans on the road.

MOOG belongs to DRiV, and the listing describes a sealed bearing assembly meant to run quietly at highway speed. It also mentions a quad lip seal to keep moisture and debris out, a rust-resistant hub and secure wheel studs for easier installation. MOOG’s own site splits its range into premium, truck and coated hubs, and seal design is a recurring theme across the line.

This hub suits Altima owners keeping a high-mileage car going through slushy winters, where the seal is the part that does the most work. A worn front hub on these cars tends to show up as a growl that changes when you steer left or right. Check year, model and engine in Amazon’s fit checker, and torque the axle nut to the service manual figure.

View MOOG 513296 on Amazon

4. ACDelco Gold 513288 (19346037): Wheel Hub and Bearing Assembly

ACDelco Gold 513288 product photo
Key features
  • GM parts brand, Gold line
  • GM number 19346037
  • Multi-lip, extreme-temperature seals
  • High carbon clean steel bearing

ACDelco Gold 513288 is a wheel hub and bearing assembly sold under GM’s parts brand with the GM number 19346037. The 513288 number is the same one MOOG lists for the 2010 to 2017 Chevrolet Equinox and a range of Buick, Cadillac and Chevrolet cars, so think of it as an example for GM crossovers and sedans that share that hub. The ACDelco listing itself does not print a vehicle list, which makes the fit checker essential.

The listing points to a multi-lip seal design with extreme-temperature seal materials to keep contaminants out, and high carbon clean steel for smooth, quiet running. Gold is ACDelco’s aftermarket replacement line, separate from GM Genuine Parts, and the listing pitches it as a dependable and economically priced repair part.

This hub suits GM owners who like sticking with the factory parts brand without going to the dealer counter. Because 513288 fits several positions on some GM models, check whether your vehicle uses it at the front, rear or both, and match the ABS connection to your old part. Enter your exact year, model and drivetrain in Amazon’s fit checker before you buy.

View ACDelco Gold 513288 on Amazon

detailed image of a cutting head used in machining and metalworking industries

5. Detroit Axle Rear Hub Pair: 2 Wheel Bearing Hubs for FWD Nissan Rogue 2014-2019

Detroit Axle Rogue Rear Pair product photo
Key features
  • 2 rear hubs, left and right
  • Lists FWD Rogue 2014-2019
  • Also FWD Rogue Sport 2017-2019
  • 5 lugs, sensor encoder ABS

This Detroit Axle kit holds two rear wheel bearing and hub assemblies, and the listing names the front-wheel-drive Nissan Rogue for 2014 and 2018 to 2019, US-built FWD Rogues from 2015 to 2017 and the FWD Rogue Sport from 2017 to 2019. All-wheel-drive versions use a different rear hub, so this is an example part for one drivetrain only.

The listing gives the specifications plainly: rear left and right position, five wheel studs, a sensor encoder for the ABS and a four-bolt square flange. Detroit Axle says its parts go through impact, wear and fatigue testing, and the listing states a 10-year warranty. Selling the hubs as a pair keeps the cost of doing both rear corners down, which is the brand’s main appeal.

Detroit Axle is the budget name in most brand comparisons, and forum reports on its quality are more mixed than for the bearing makers. It suits Rogue owners who want to refresh both rear hubs at once without paying for two premium units, and who are happy to keep the receipt for any warranty claim. Confirm FWD or AWD, build plant and year in the fit checker before ordering.

View Detroit Axle Rogue Rear Pair on Amazon

6. A-Premium Rear Hub Pair: Wheel Bearing and Hub Assemblies with ABS for Hyundai Elantra

A-Premium Elantra Rear Pair product photo
Key features
  • 2 rear hubs, ABS sensor included
  • Lists Elantra 2017-2020
  • Also Kona FWD 2018-2023
  • Reference 512645, 52730-F2000

A-Premium sells this set of two rear wheel bearing and hub assemblies with the ABS sensor included. The listing names the Hyundai Elantra from 2017 to 2019 without the Sport package, several 2020 Elantra trims with the 2.0L and 1.4L engines, and front-wheel-drive Kona models from 2018 to 2023. Its reference numbers are 512645 and Hyundai 52730-F2000, so treat it as an example part for those cars.

The specifications list five wheel studs, a four-hole flange, a ball bearing and factory pre-greasing, with GCr15 and 65Mn steel named for the bearing and flange. A double-lip seal ring and heat-resistant grease are meant to keep water and grit away from the races. The listing states a one-year, unlimited-mileage guarantee.

This pair suits Elantra and FWD Kona owners who want to replace both rear hubs on a tight budget, especially where a failing hub has also taken out the ABS sensor. The Sport package and some engine and year combinations are excluded, so check the exact trim before ordering. Run your car through Amazon’s fit checker and compare the sensor plug with your old hub.

View A-Premium Elantra Rear Pair on Amazon

Brand by Brand: Which Example Fits Which Driver

This table lines up the example listings so you can see where each brand sits. Use it to narrow the field, then search that brand’s catalog for your own vehicle.

BrandExample listingReference vehicleGood fit for
Timken513266Hyundai and Kia OE numbersDrivers who want a bearing maker’s own hub
SKFBR930926Nissan 2017-2022, Infiniti 2011-2021OE-style repair with SKF instructions
MOOG513296Altima 2007-2018 frontHigh-mileage sedans in salty climates
ACDelco Gold513288GM crossovers such as the EquinoxGM owners who like the factory parts brand
Detroit AxleRear pairRogue FWD 2014-2019Doing both rear hubs on a budget
A-PremiumRear pairElantra 2017-2020, Kona FWDValue pair with the ABS sensor included
Example hub assemblies in this guide, matched to the vehicle or OE number each Amazon listing names

A pair costs less per hub, but you only need both sides if both are worn.

nostalgic workshop featuring antique shelves filled with hardware and gears

Road Salt, Potholes and Hub Life in Grand Rapids

West Michigan winters attack hubs from two sides. Brine and slush work at the seals, and once water reaches the bearing it pits the races and the noise starts. Rust also bonds the hub to the knuckle.

Potholes after the spring thaw are the other problem, since a hard hit can dent a bearing race in an instant. Our article on how long wheel bearings last and what wears them out early covers the habits that shorten hub life. If you just hit a deep one, look over our list of pothole damage signs to check as well.

black SUV in motion with urban background

Among the best wheel hub assembly brands, the seal design is the feature most worth reading about for a salt-belt car. Multi-lip or quad-lip seals and coated flanges are written into some listings, and they are worth the small step up when you drive through a lot of slush.

Fitting a New Hub and When to Hand It Over

A hub swap is safety work, so do it on jack stands with the right tools. Clean rust from the knuckle bore and mounting face so the new hub sits flat. Torque the knuckle bolts and the axle nut to the figures in the service manual, and use a new axle nut if the manual calls for one.

misty road in rural Iceland offers a breathtaking view with its lush grass and mountains

Handle the ABS sensor gently, and keep magnets and debris away from an encoder ring. Torque the wheel to spec with a click wrench; our guide to the best torque wrench for lug nuts explains why. If the ABS light stays on after the job, our page on an ABS light that stays on lists the next checks.

Seized hubs, pressed-in bearings and broken knuckle bolts are where many home jobs stall. Our shop handles wheel bearing replacement in Grand Rapids on foreign and domestic vehicles, and we can check the rest of the front end while the wheel is off.

Frequently Asked Questions

Is Timken, SKF or MOOG better for a hub assembly?

All three sell OE-grade hubs, and none wins on every car. Compare the listing for your exact part number: seal design, ABS setup and what hardware comes in the box. Then buy from a seller that lets you check fit before you order.

Are Detroit Axle hubs good enough for a daily driver?

Many owners use them without trouble, and the listings state a long warranty. Quality reports vary more than with the bearing makers, so they suit a budget repair best. Keep your receipt in case you need a warranty claim.

Should I replace wheel hubs in pairs?

Only if both are worn. Hubs often fail one at a time, but the other side on a high-mileage car has seen the same salt and potholes. Check it for play and noise while the car is in the air.

Do I need an alignment after replacing a hub assembly?

Usually not for a bolt-on hub, since it does not change the steering angles. If you removed strut-to-knuckle bolts or tie rods to get the hub out, have the alignment checked.

Hearing a growl that changes as you steer? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or set up a wheel bearing check on our contact page.

Working during our hours? Leave the keys with our after-hours drop-off at 456 Carrier St NE, Grand Rapids, and add a note about which corner makes the noise.