456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

10W-30, 15W-40 or 5W-40? Finding the Best Motor Oil for Ram Cummins Trucks

best motor oil for ram: stunning sunset casts dramatic light over an empty country road

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

Ram changed the oil grade for its 6.7 Cummins in 2019, and a lot of truck owners never heard about it. The best motor oil for Ram heavy-duty trucks depends first on the model year stamped on the door sticker, then on how cold your winters get.

This guide sorts out the Cummins grades by year, explains the letters on a diesel oil label, and reviews six heavy-duty oils that fit those rows. If you drive a gas car as well, our roundup of the best synthetic oil for passenger cars covers that side.

Quick answer

Which oil does a Ram truck need?

A 2019 or newer 6.7 Cummins takes 10W-30 meeting MS-10902 and API CK-4, and 15W-40 must not go in it. A 2018 or older Cummins takes 15W-40. Where winter routinely drops below 0°F, any year can run a 5W-40 synthetic. A HEMI follows its filler cap.

Our Quick Picks

Three picks that cover the three Cummins rows: 10W-30 for 2019 and newer trucks, a 5W-40 synthetic for hard winters, and 15W-40 for 2018 and older trucks. All six oils are reviewed below.

Shell Rotella T6 10W-30 product photo
2019+ Cummins

Shell Rotella T6 10W-30

10W-30, full synthetic, 3 x 1 gal

A CK-4 full synthetic in the lighter grade that FCA calls for on newer 6.7 engines.

Suits2019 and newer Ram 2500 and 3500 diesels
View on Amazon →
Delo 400 XSP 5W-40 product photo
Cold winters

Delo 400 XSP 5W-40

5W-40, full synthetic, 1 gal

A CK-4 synthetic 5W-40 for trucks that sit outside through hard winter nights.

SuitsAny model year 6.7 Cummins in very cold climates
View on Amazon →
Mobil Delvac 1300 Super 15W-40 product photo
2018 and older

Mobil Delvac 1300 Super 15W-40

15W-40, heavy duty, 1 gal

A long-standing 15W-40 for older Cummins trucks in climates above 0°F.

Suits2018 and older Ram 2500 and 3500 diesels
View on Amazon →

Which Ram Engine Is Under Your Hood?

Ram sells gas and diesel engines in the same cab styles, so check the fender badge first.

  • 6.7 Cummins turbo diesel: the engine in Ram 2500, 3500 and 4500/5500 chassis cabs. Its grade depends on model year and climate, and it is the focus below.
  • 5.7 and 6.4 HEMI V8: gasoline engines that use a light passenger-car grade, typically 5W-20, printed on the filler cap.
  • 3.0 EcoDiesel V6: the smaller diesel offered in the Ram 1500. Its manual lists its own grade and spec, which differ from the Cummins, so read it before buying.

The X15 is a Cummins engine for semi trucks, not a Ram pickup engine, though some listings mention it because the same oil families serve both.

Reading a Diesel Oil Label: MS-10902, CK-4 and FA-4

Three codes matter on a Cummins jug. MS-10902 is the Chrysler (now FCA) material standard that Ram names for this engine. API CK-4 is the current American Petroleum Institute diesel category, and CK-4 oils are also labeled for the older CJ-4 that earlier Ram trucks list.

The trap is FA-4. The API notes that API FA-4 oils are not backward compatible with CK-4 and earlier categories, and FA-4 only comes in XW-30 grades. A 10W-30 jug with the FA-4 donut is the wrong choice for a Cummins whose manual calls for CK-4.

Not every listing prints the MS number, so read the back label before you pay. A 6.7 Cummins also holds far more oil than a car engine, so check the refill capacity in your manual.

Best Motor Oil for Ram: Six Diesel Oils by Grade

Choosing the best motor oil for Ram diesels starts with the grade, so the list runs in grade order: two 10W-30 oils for 2019 and newer trucks, two 5W-40 synthetics for cold climates and two 15W-40 oils for 2018 and older trucks.

1. Shell Rotella T6 10W-30: Full Synthetic Diesel Engine Oil, 3 x 1 Gallon

Shell Rotella T6 10W-30 product photo
Key features
  • SAE 10W-30 full synthetic, three 1-gallon jugs
  • API CK-4 and CJ-4 on the listing
  • Lists Cummins CES 20086 and 20081
  • Triple Protection Plus additive package

Rotella T6 is Shell’s full synthetic heavy-duty line, and this pack holds three one-gallon jugs of the 10W-30 grade. That grade is the one FCA names for 2019 and newer 6.7 Cummins trucks, the engines where 15W-40 is no longer allowed. Shell is also one of the brands the FCA bulletin mentions by name for this engine.

The listing shows API CK-4 along with CJ-4 and older categories, which covers the CK-4 requirement for newer trucks. It also lists Cummins CES 20086 and 20081, and the bulletin says oils meeting CES 20081 may be used. The listing does not print the Chrysler MS-10902 number, so read the back label if you want that standard named on the jug. Shell describes the oil as a good fit where temperatures swing widely through the year.

Three gallons is a practical buy for a truck that holds more than a car engine, with some left over for top-ups. It suits an owner who tows or works the truck and wants one synthetic for most of the year. It is the wrong grade for a 2018 or older truck in a mild climate, where the bulletin lists 15W-40, and it is not meant for a HEMI gas engine.

View Shell Rotella T6 10W-30 on Amazon

2. Valvoline Premium Blue 10W-30: Heavy Duty Diesel Engine Oil, 3 x 1 Gallon

Valvoline Premium Blue 10W-30 product photo
Key features
  • SAE 10W-30, three 1-gallon jugs
  • One Solution Gen2 additive technology
  • Listing: endorsed and recommended by Cummins
  • Made and formulated in the USA

Premium Blue is Valvoline’s heavy-duty diesel line, and this case holds three gallons of the 10W-30 grade. The listing says it is the only oil exclusively endorsed and recommended by Cummins, which is why it shows up so often in Cummins owner discussions. The 10W-30 grade lines up with the FCA bulletin for 2019 and newer Ram heavy-duty trucks.

Valvoline describes a One Solution Gen2 formula built for diesel, gasoline and natural gas engines, with synthetic base oils and inhibitors aimed at oxidation, deposits and sludge. The listing also points to strong shear stability, so the oil holds its grade under heat and load. A note about extended drains in X15 and X12 engines refers to Cummins semi-truck engines, not the 6.7 in a Ram, so follow your own oil life monitor.

The listing does not show the API category or the MS-10902 number, so check that the jug carries the CK-4 donut before using it in a newer truck. It suits an owner who wants the oil brand Cummins itself backs in the grade the bulletin names. It does not suit 2018 and older trucks in mild climates or any HEMI gas engine.

View Valvoline Premium Blue 10W-30 on Amazon

peaceful rural road lined with tall trees and green foliage under a bright sky

3. Chevron Delo 400 XSP 5W-40: Full Synthetic Heavy Duty Diesel Oil, 1 Gallon

Delo 400 XSP 5W-40 product photo
Key features
  • SAE 5W-40 full synthetic, 1-gallon jug
  • API CK-4 and CJ-4 per Chevron
  • Cummins CES 20086 approved per Chevron
  • Made for cold starting below zero

Delo is Chevron’s heavy-duty brand, and 400 XSP is its full synthetic 5W-40, sold here as a single one-gallon jug. FCA calls for a 5W-40 synthetic on any model year 6.7 Cummins that lives where winter temperatures routinely fall below 0°F. The bulletin also says that grade is safe to keep using through summer.

Chevron’s product page lists approvals for API CK-4, CJ-4 and earlier categories, along with Cummins CES 20086. The listing highlights consistent cold starting in sub-zero temperatures, and Chevron describes good soot control and support for diesel particulate filter life. It is also rated for gasoline engines that call for this grade, which helps in a mixed fleet. Neither the listing nor the maker page names Chrysler MS-10902, so check the jug if that matters to you.

One gallon will not fill a Cummins on its own, so plan on several jugs or the three-pack. This oil suits a truck that is parked outdoors in a West Michigan winter, plows snow or starts in the dark. If your truck lives somewhere mild and you prefer the grade by model year, a 10W-30 or 15W-40 from this list fits better.

View Delo 400 XSP 5W-40 on Amazon

4. Valvoline Premium Blue Extreme 5W-40: Full Synthetic Diesel Engine Oil, 1 Gallon

Valvoline Premium Blue Extreme 5W-40 product photo
Key features
  • SAE 5W-40 full synthetic, 1-gallon jug
  • Cold start protection with soot control
  • Listing: up to 1.5% fuel economy vs 15W-40
  • Listing: endorsed and recommended by Cummins

Premium Blue Extreme is the full synthetic version of Valvoline’s heavy-duty line, here in the 5W-40 grade and a one-gallon jug. That is the grade FCA names for any year of 6.7 Cummins that sees winters routinely below 0°F. Like the regular Premium Blue, the listing says Cummins endorses and recommends it.

The listing focuses on protection during cold start-ups while controlling soot, which suits a truck that sits for days between jobs. Valvoline also claims up to 1.5 percent better fuel economy than conventional 15W-40 in on-highway use, along with resistance to oxidation, deposits and sludge from its synthetic base oils. The listing does not print an API category or MS-10902, so confirm both on the back label.

Buy enough single jugs to cover your refill capacity plus a little for top-ups. It suits an owner who wants the Cummins-backed brand in a cold-climate synthetic and plans to run one grade all year. It is not the cheapest route for a mild-climate truck that only needs 10W-30 or 15W-40, and it is not a gas engine oil for the HEMI.

View Valvoline Premium Blue Extreme 5W-40 on Amazon

winding road through a lush green landscape with vibrant foliage and rocky terrain

5. Mobil Delvac 1300 Super 15W-40: Heavy Duty Diesel Engine Oil, 1 Gallon

Mobil Delvac 1300 Super 15W-40 product photo
Key features
  • SAE 15W-40, 1-gallon jug
  • Soot-viscosity and oxidation control
  • Works with low and ultra-low sulfur diesel
  • Rated for mixed fleets with gas engines

Delvac 1300 Super is Mobil’s mainstream heavy-duty diesel oil, and this is the 15W-40 grade in a one-gallon jug. FCA lists 15W-40 for 2018 and older 6.7 Cummins trucks that normally stay above 0°F. It must not go in a 2019 or newer engine, so check the model year on the door sticker before you buy.

The listing points to soot-viscosity control, thermal and oxidation stability and a strong base number reserve for corrosion protection with low or ultra-low sulfur diesel. It also mentions stay-in-grade shear stability, low-temperature pumpability and good oil consumption control. Mobil says it meets key engine maker specifications and the latest API gasoline category, so one oil can serve a mixed fleet.

The listing does not print the API diesel category or MS-10902, so check the jug label for the CJ-4 or later mark that the bulletin calls for. It suits an owner of an older Cummins who works the truck in a mild or average climate and wants a familiar heavy-duty oil. It does not suit any 2019 or newer 6.7 or a truck that starts in sub-zero cold.

View Mobil Delvac 1300 Super 15W-40 on Amazon

6. Chevron Delo 400 XLE SB 15W-40: Synblend Heavy Duty Diesel Engine Oil, 1 Gallon

Delo 400 XLE SB 15W-40 product photo
Key features
  • SAE 15W-40 synthetic blend, 1-gallon jug
  • API CK-4 and CJ-4 per Chevron
  • Cummins CES 20086 approved per Chevron
  • ISOSYN additive technology

Delo 400 XLE SB is Chevron’s synthetic blend 15W-40, the product that replaced the older Delo 400 SDE on Chevron’s site. This listing is a single one-gallon jug, and Amazon also carries three-jug cases and five-gallon pails that make a full Cummins refill easier to cover. The 15W-40 grade fits 2018 and older 6.7 Cummins trucks that normally run in temperatures above 0°F.

Chevron’s product page lists approvals for API CK-4, CJ-4 and earlier categories, plus Cummins CES 20086, so the CJ-4 requirement for older trucks is covered on paper. The listing describes a long-drain mixed-fleet oil built with Chevron’s ISOSYN technology, with piston deposit control, turbocharger protection and soot dispersancy. Chevron does not list Chrysler MS-10902 on its page, so read the jug if you want that number in print.

This is a sound option for an owner who wants a synthetic blend rather than a conventional 15W-40 for an older truck that tows. It is the wrong oil for any 2019 or newer 6.7, where 15W-40 can cause valve lash adjuster deposits. For an older truck that starts in sub-zero mornings, the 5W-40 synthetics above are the safer grade.

View Delo 400 XLE SB 15W-40 on Amazon

Ram Cummins Oil Grades by Model Year

FCA spelled the split out in service bulletin 09-013-23 on 6.7L oil usage, filed with NHTSA in 2023. It covers 2013 to 2023 heavy-duty Rams and warns that 15W-40 in a 2019 or newer engine leaves deposits in the hydraulic valve lash adjusters, which can cause noise or engine damage.

Truck and climateGradeSpec named by FCAOils reviewed here
2019 and newer 6.7 Cummins10W-30MS-10902, API CK-4 (CES 20081 also allowed)Rotella T6 10W-30, Premium Blue 10W-30
2018 and older 6.7 Cummins15W-40MS-10902, API CJ-4Delvac 1300 Super, Delo 400 XLE SB
Any year, winters routinely below 0°F5W-40 syntheticMS-10902, API CJ-4Delo 400 XSP, Premium Blue Extreme
5.7 or 6.4 HEMI gas V8Per filler capPer owner’s manualNone (passenger-car grades)
Ram oil grades by engine, model year and climate, from FCA bulletin 09-013-23. Your owner’s manual has the final word.
aerial shot of cars navigating a winding road through lush greenery

The bulletin adds that the 5W-40 synthetic is safe to run through summer too. For trucks that live in the snow belt, it is the simplest answer to the best motor oil for Ram diesels of any model year.

Cold Starts on a Cummins in Grand Rapids

A diesel parked outside on a January night in West Michigan cranks over on oil that has thickened in the pan, and the first number in the grade tells you how well it flows at that moment. Our guide to the best motor oil for cold weather explains the cold-cranking and pumping tests behind that number.

Plugging in the block heater on the coldest nights helps both the oil and the starter. Our roundup of the engine block heaters for diesel trucks covers the cord and element options for the Cummins.

aerial shot of a striking red road cutting through vibrant green farmland fields

Short trips and long idling let fuel and moisture build up in diesel oil, so follow the oil life monitor if you tow, plow or idle a lot. Our article on how long you can go without an oil change covers what happens when that interval slips.

When the Oil Isn’t the Real Problem

Fresh oil will not fix a warning light or a falling dipstick. A red oil pressure warning needs attention right away, and our guide to an oil pressure light that comes on explains what to do. If you are topping up often, the measuring method in our piece on Audi 2.0T oil consumption works on a diesel truck too.

breathtaking aerial view of winding roads traversing lush green hills and valleys under a clear sky

The filter matters as much as the oil on a Cummins, and our guide to the oil filter for 6.7 Cummins Rams by year lists the right one. Our shop works on foreign and domestic vehicles, and you can book an oil change in Creston with the grade your manual lists.

Frequently Asked Questions

Can I use 15W-40 in a 2019 or newer Ram 2500 Cummins?

No. FCA bulletin 09-013-23 says 15W-40 cannot be used in any 2019 or newer 6.7L because of the redesigned valve train. Use 10W-30 meeting MS-10902 and API CK-4, or a 5W-40 synthetic in very cold climates.

What is the best motor oil for Cummins 6.7 trucks in a Michigan winter?

If winter temperatures routinely drop below 0°F where the truck lives, FCA calls for a 5W-40 synthetic meeting MS-10902 for any model year. Delo 400 XSP and Valvoline Premium Blue Extreme both come in that grade.

Is FA-4 10W-30 oil safe for a Cummins?

Not when the manual calls for CK-4. The API says FA-4 oils are not backward compatible with CK-4 and earlier categories, so look for the CK-4 donut on any 10W-30 jug.

Does a HEMI Ram 1500 use the same oil as a Cummins?

No. The HEMI is a gasoline engine that takes a light passenger-car grade, printed on its filler cap and in the manual. Heavy-duty diesel oils in this guide are for the 6.7 Cummins.

Rather have the oil and filter changed for you? Ring 456 AutoFix at 616-279-3832 from Monday to Friday, 8am to 5pm, or set up a visit through our contact page.

If your workday runs past closing, leave the truck with our after-hours drop-off and collect it when it suits you. The shop sits at 456 Carrier St NE in Creston, Grand Rapids.