456 Carrier St NE, Grand Rapids, MI 49505 Mon to Fri, 8:00am to 5:00pm. After-hours drop-off available 456autofix@gmail.com

Camry, RAV4, Corolla, Highlander: How to Choose the Best Ball Joints for Toyota Cars

best ball joints for toyota: bright contemporary tailoring workshop with mannequins and sewing accessories

As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.

A dull knock from the front of a Camry over a speed bump, or a RAV4 that feels loose when you turn into a parking spot, often points to a worn lower joint. Finding the best ball joints for Toyota cars and crossovers is mostly a matching exercise: the right part depends on the model, the generation and, for several of them, the side of the car.

Below are six listings for the Camry, RAV4, Corolla and Highlander, sorted by years and position. Not sure the joints are the culprit? Our rundown of bad ball joint symptoms helps you confirm it first.

Quick answer

Which ball joint does my Toyota car or crossover need?

For a 2007-2017 Camry, look at the MOOG K500043 and its left-side partner. The Detroit Axle pair covers 2006-2018 RAV4 and 2018 and later Camry, the MOOG K500175 fits 2009-2019 Corolla, and the K500187 suits 2008-2019 Highlander. Confirm year, side and trim on Amazon first.

Our Quick Picks

Three listings that cover the Toyota cars and crossovers we see most often. Match your Toyota’s year, side and trim on Amazon before ordering.

MOOG K500043 product photo
Camry 2007-2017

MOOG K500043

Front lower, right side

A side-specific MOOG lower joint for the sixth and seventh gen Camry.

Suits2007-2017 Camry owners with play in the passenger side joint
View on Amazon →
Detroit Axle Lower Ball Joint Pair product photo
RAV4 and newer Camry

Detroit Axle Lower Ball Joint Pair

Front lower, both sides

A two-joint kit that covers the third and fourth gen RAV4 and the current Camry.

SuitsRAV4 and 2018 and later Camry owners doing both sides at once
View on Amazon →
MOOG K500175 product photo
Corolla 2009-2019

MOOG K500175

Front lower, single joint

A MOOG lower joint listed for the tenth and eleventh gen Corolla.

Suits2009-2019 Corolla owners replacing a worn lower joint
View on Amazon →

Match the Model, the Years and the Side

Toyota shares front suspension parts across more models than most owners expect. A 2018 Camry, a 2014 RAV4 and a C-HR can take the same lower joint, while a 2005 Camry shares its part with the first Highlander.

The other trap is the side. MOOG sells several Toyota lowers as left and right parts with different numbers, such as the K500043 for the passenger side of a 2007-2017 Camry and the K500044 for the driver side. Pairs from Detroit Axle and A-Premium put both sides in one box, which removes the guesswork.

Note the model year, trim, drivetrain and engine, enter them in Amazon’s fit checker, and read the notes under each listing.

Single Joint, Pair or Complete Control Arm

On these four models the part that wears is the front lower joint, which ties the lower control arm to the steering knuckle. If it separates, the wheel can tuck under the car, so don’t drive on a joint with real play for months.

  • One joint: when only one side shows play.
  • A pair: on a high-mileage car, since the second side is rarely far behind.
  • A complete lower control arm: when the arm bushings are cracked, or your year only sells the joint built into the arm.

Many of these lowers bolt to the arm instead of pressing in, so compare the product photo with the joint on your car. If the bushings are also tired, our guide to struts for Toyota cars and SUVs covers the other front end parts that often wear at the same mileage.

Best Ball Joints for Toyota: Model by Model

The list runs from the Camry and RAV4 to the Corolla and the Highlander. Each listing names its own years and side, so treat it as a shortlist.

1. MOOG K500043: Front Right Lower Ball Joint for 2007-2017 Toyota Camry

MOOG K500043 product photo
Key features
  • Front lower, right (passenger) side
  • Listing names 2007-2017 Camry
  • Also lists 2005-2018 Avalon and Lexus ES350
  • Single joint, made by DRiV under the MOOG brand

The MOOG K500043 is a front lower ball joint for the right side of the 2007-2017 Camry. The same listing also names the 2005-2018 Avalon, the 2007-2018 Lexus ES350 and the 2013-2018 ES300h, which share the front suspension layout. It connects the lower control arm to the steering knuckle, so it carries much of the weight at that corner and lets the wheel steer and move up and down.

MOOG is a DRiV brand with a long history in chassis parts, and its part numbers are often used as the cross-reference for other makers. The listing describes the joint as built for everyday road stress and for restoring steady steering and alignment. Because it is sold as a single right-side part, you can replace just the worn corner when the other side still checks out tight. The matching driver side joint is the K500044, which you would order separately.

This joint does not suit the 2002-2006 Camry or the 2018 and later car, which use different parts covered further down this list. It is also not a pair, so a full front job needs the left-side joint as well. Confirm your year and trim in the Amazon fit checker, and book an alignment once the new joint is in.

View MOOG K500043 on Amazon

2. Detroit Axle 2 Front Lower Ball Joints: Pair for 2006-2018 RAV4 and 2018-2025 Camry

Detroit Axle Lower Ball Joint Pair product photo
Key features
  • Kit includes 2 front lower ball joints
  • Lists 2006-2018 RAV4 (bolt-on type)
  • Lists 2018-2025 Camry and 2018-2022 C-HR
  • Impact, wear and fatigue tested per listing

This Detroit Axle kit puts two front lower ball joints in one box, one for each side. Its fitment list is long because Toyota used the same joint across several platforms: the 2006-2018 RAV4 with the bolt-on joint, the 2018-2025 Camry, the C-HR, the 2019-2022 Avalon, the Prius V and a run of Lexus ES, NX and UX models. That makes it one of the few listings that covers both a Toyota sedan and a Toyota crossover.

Detroit Axle says its suspension parts go through impact, wear and fatigue testing to check quality and durability. Buying a pair suits a car with high mileage, where the second joint tends to wear soon after the first, and it saves you from tracking separate left and right numbers. The bolt-on design on the RAV4 means the joint attaches to the lower control arm with bolts rather than being pressed into a bore.

The listing does not name the 2019 and later RAV4, so owners of the current model should look elsewhere. The 2018 C-HR is listed except for Japan-built cars, which shows why the notes matter. Enter your year, trim and engine in the fit checker before you order, and have the car aligned afterward.

View Detroit Axle Lower Ball Joint Pair on Amazon

cars travel on a winding highway through a mountainous landscape during an autumn sunset

3. MOOG K500175: Front Lower Ball Joint for 2009-2019 Toyota Corolla

MOOG K500175 product photo
Key features
  • Front lower position
  • Listing names 2009-2019 Corolla
  • Also lists Matrix, Vibe and Scion tC
  • Single joint from the MOOG chassis range

The MOOG K500175 is a front lower ball joint listed for the 2009-2019 Toyota Corolla. The compatibility list also covers the 2003-2013 Matrix, its Pontiac Vibe twin and the 2005-2010 Scion tC, plus the 2018 Corolla iM. On these compact cars the lower joint is the main pivot between the control arm and the knuckle, so wear shows up as a knock over bumps or vague steering.

Unlike some Toyota parts in this guide, the listing does not split the K500175 by side, so one part number serves either front corner. MOOG describes the joint as designed for controlled pivoting between suspension parts and built to handle the stress of daily driving. Its part number appears in many aftermarket cross-reference lists, which helps when you compare it with a quote or another brand.

This joint is for the older Corolla body styles only, and the 2020 and later sedan uses a different part. It is sold singly, so plan on two if both sides have play. The 2019 listing covers specific versions, so enter your body style and trim in the Amazon fit checker, and schedule an alignment after the work is done.

View MOOG K500175 on Amazon

4. A-Premium 2-Pack Front Lower Ball Joints: Left and Right for Corolla and 2001-2005 RAV4

A-Premium Lower Ball Joint 2-Pack product photo
Key features
  • Front lower, left and right sides
  • Lists 1996-2008 Corolla and 2001-2005 RAV4
  • Pre-greased, no grease fitting
  • Cross-references K90309 and K9756

The A-Premium two-pack covers both front lower ball joints on a group of older Toyota cars. Its fitment list names the 1996-2008 Corolla, the 2001-2005 RAV4 with the 2.0L or 2.4L engine, the 2000-2005 Celica and several Prius years. It also lists some 2019-2022 Corolla versions, with notes on engine and trim for the 2019 cars. The listing gives K90309 and K9756 as reference numbers, which helps when you compare it with a parts counter quote.

The listing describes a steel ball stud and says the joints arrive pre-greased, with no grease fitting included. That makes it a sealed design, so there is no regular greasing to do, but it also means fresh grease can’t be pumped in later. Having both sides in one box keeps the front end even on a car with high mileage, and A-Premium notes a one-year warranty on the listing.

This pair does not suit the 2006 and later RAV4 or the 2009-2018 Corolla, which use other joints in this guide. Because the 2019 Corolla coverage depends on trim and body style, enter the full vehicle details in the Amazon fit checker before buying, and plan on an alignment after the swap.

View A-Premium Lower Ball Joint 2-Pack on Amazon

scenic view of a winding road through mountains under a cloudy sky

5. MOOG K500187: Front Right Lower Ball Joint for 2008-2019 Toyota Highlander

MOOG K500187 product photo
Key features
  • Front lower, right (passenger) side
  • Listing names 2008-2019 Highlander
  • Also lists Sienna, Venza and Lexus RX
  • Single joint, made by DRiV under the MOOG brand

The MOOG K500187 is a front lower ball joint for the right side of the 2008-2019 Highlander. Its listing also names the 2011-2020 Sienna, the 2009-2016 Venza and a long run of Lexus RX350 and RX450h models, all of which share the front suspension design. On a three-row SUV the front lower joints carry a lot of weight, which is part of why they wear on high-mileage family vehicles.

MOOG describes the joint as built to handle varying road conditions and to support steady steering and alignment. Buying by side means you only replace the corner that has play, which is common when one joint fails first. The left-side partner is sold as the K500188, and both numbers turn up in the cross-reference lists of other brands, so they are easy to match against a quote.

This joint does not fit the 2001-2007 Highlander, which uses the K90346 family covered next, or the 2020 and later model. It is a single part, so a full front job needs the left side too. Run your year and trim through the Amazon fit checker, and have the alignment checked after installation.

View MOOG K500187 on Amazon

6. MOOG K90346: Front Left Lower Ball Joint for 2002-2006 Camry and 2001-2007 Highlander

MOOG K90346 product photo
Key features
  • Front lower, left (driver) side
  • Lists 2002-2006 Camry and 2001-2007 Highlander
  • Hardened ball stud per listing
  • Forged housing with extra material in key areas

The MOOG K90346 is a front lower ball joint for the left side of an older group of Toyota and Lexus vehicles. The listing names the 2002-2006 Camry, the 2001-2007 Highlander, the 2004-2010 Sienna and the 2004-2008 Solara, plus the Lexus ES300, ES330 and several RX years. These vehicles are now old enough that original joints have often covered a lot of miles.

According to the listing, the joint has a hardened ball stud made from materials equal to or better than the original, and a forged housing with up to 52 percent more material in key areas. MOOG says its engineers validated the design and that it is meant to meet or exceed original equipment performance. The listing also urges buyers to enter year, make, model, engine and trim in the fit checker and to read any qualifier notes.

This is a single left-side joint, and the right side uses the K90347, so a full front job needs both. It does not suit the 2007 and later Camry or the 2008 and later Highlander. Check the fit notes on Amazon for your exact vehicle, and plan an alignment after the job.

View MOOG K90346 on Amazon

Fit Table: Best Ball Joints for Toyota by Model

Use this table to narrow the search to one or two parts. The fit checker still has the final word on your trim and drivetrain.

Toyota model and yearsPositionListing to check
Camry 2007-2017Front lower, right sideMOOG K500043 (left side is K500044)
Camry 2018-2025, RAV4 2006-2018Front lower, both sidesDetroit Axle pair
Corolla 2009-2019Front lowerMOOG K500175
Corolla 1996-2008, RAV4 2001-2005Front lower, both sidesA-Premium 2-pack
Highlander 2008-2019Front lower, right sideMOOG K500187 (left side is K500188)
Camry 2002-2006, Highlander 2001-2007Front lower, left sideMOOG K90346 (right side is K90347)
Camry, RAV4, Corolla and Highlander years matched to the ball joint listings reviewed above

The Tacoma, Tundra and 4Runner are body-on-frame trucks with their own joints; our guide to the ball joints for Tacoma trucks covers the most common by generation.

picturesque view of the road winding towards the majestic Rocky Mountains

Salt, Potholes and a Recall Check

Grand Rapids winters are hard on front ends. Brine gets past a split boot and rusts the ball in its socket, and freeze-thaw potholes hit the lower joints hard. Our pothole damage signs checklist covers what else to look at after a hard hit.

The Car Care Council’s vehicle systems overview suggests a steering and suspension check at least once a year, usually alongside a wheel alignment. Before you buy parts, also enter your VIN in Toyota’s recall lookup to see whether any open campaign covers the front suspension.

warm and artistic space featuring wooden easels and cloths

Worn shocks and struts let the body crash down on every bump, which loads the joints more than it should. Our look at shocks and struts for daily drivers explains how to tell when they are spent, and our roundup of the best ball joints for cars and SUVs covers other makes if you keep more than one brand in the driveway.

Doing the Swap or Handing It Over

The job means putting the car on stands, separating the tapered stud from the knuckle and removing the bolts that hold the joint to the arm. On a salted car, those bolts are often the hardest part. Torque each fastener to Toyota’s figure and fit a fresh cotter pin.

picturesque road through a forested mountain landscape under a cloudy sky

Even the best ball joints for Toyota front ends will only hold up when they are installed correctly, and the car needs an alignment afterward. If you would rather leave the job to us, our suspension repair in Grand Rapids covers ball joint checks, replacement and the steering inspection that goes with it. Toyota suspension jobs here are overseen by owner Hendrick Hoffman, ASE and State of Michigan certified in that area.

Frequently Asked Questions

Do the Camry and RAV4 use the same lower ball joint?

For some years, yes. The Detroit Axle pair in this guide lists 2018 and later Camry alongside 2006-2018 RAV4, C-HR and several Lexus models. Older Camrys use different parts, so check your exact year in the fit checker.

Are Toyota lower ball joints sold by side?

Several are. MOOG lists the K500043 for the right side of a 2007-2017 Camry and the K500044 for the left, and the Highlander K500187 has a left-side partner, the K500188. Pairs avoid the problem by including both.

Should I buy a ball joint or a whole lower control arm?

Buy the joint when the arm and its bushings are in good shape. If the bushings are cracked or your model year only sells the joint built into the arm, a complete arm is the simpler job.

Does my Toyota need an alignment after new ball joints?

Yes. Separating the knuckle and fitting a new joint can change camber and toe slightly, so an alignment keeps the car tracking straight and stops the tires from wearing on one edge.

Hearing a knock from the front of your Camry or RAV4 every time the road gets rough? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or reach us through the contact page to book a suspension inspection.

Can’t get away before closing time? Our after-hours drop-off lets you leave the car and keys with us at 456 Carrier St NE, Grand Rapids, after your workday ends.