As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Toyotas last, which is why so many eventually develop a droning noise from one wheel. The best wheel bearing for Toyota owners is the part listed for your model, years, drive type and corner, from a maker that states its fitment plainly.
This guide explains which Toyotas use a bolt-on hub and which use a bearing pressed into the knuckle, then walks through six listings for the Camry, RAV4, Corolla, Tacoma and Tundra. Not sure your noise is a bearing yet? Our guide to how long wheel bearings last explains what wears them out.
Quick answer
What wheel bearing should I buy for my Toyota?
Match the part to your model, years, drive type and corner. MOOG 513258 is a front hub for 2006-2018 RAV4s, MOOG 515201 covers the front of 2005-2021 Tacomas, and a Timken bearing pair suits the front of 2004-2017 Camrys. Confirm the fit on Amazon before ordering.
Our Quick Picks
Three listings for the most common Toyota jobs: the front of a RAV4, the front of a Tacoma and the front of a Camry.

MOOG 513258
A bolt-on MOOG front hub for the third and fourth generation RAV4.

MOOG 515201
A MOOG front hub that covers Tacoma, 4Runner and FJ Cruiser trucks.

Timken Camry Front Bearing Pair
Two genuine Timken front bearings for doing both sides of a Camry.
Pressed Bearing or Bolt-On Hub: How Toyota Wheel Ends Differ
Toyota uses two broad designs across its lineup. On many front-drive cars, including the Camry and Corolla front ends of recent decades, a bare bearing is pressed into the steering knuckle and the hub flange is pressed into the bearing. On the RAV4 front and on the Tacoma and Tundra front ends, the bearing, flange and studs arrive as one hub assembly that bolts to the knuckle.
A bolt-on hub comes off with hand tools, while a pressed bearing needs the knuckle out and a press or adapter kit. NTN, a major supplier of original hubs, lays out these designs as generations on its NTN wheel hub assemblies page, from the simple Gen 1 bearing to the flanged Gen 3 unit.
Before you shop, pin down four things:
- Model and years: a 2011 RAV4 and a 2020 RAV4 need different parts.
- Drive type: Tacoma and Tundra front hubs differ between 4WD and two-wheel-drive trucks.
- Corner: front and rear parts differ on every Toyota here.
- ABS: note any sensor or tone ring on the old part and match it.
Toyota OE, Timken, MOOG or National: Picking a Brand
A Toyota dealer part is the reference point, and the reputable aftermarket makers publish which Toyota numbers their parts replace. Timken and National are long-standing bearing names, and their bare bearings are what you want for a pressed Camry or Corolla front. MOOG, owned by DRiV, sells complete hubs by vehicle with the fit list printed on each listing.
Detroit Axle sits at the value end and often sells hubs in pairs. Our roundup of the best wheel hub assembly brands compares these companies in more depth, but the best wheel bearing for Toyota owners is still the number that fits your corner.
Best Wheel Bearing for Toyota: Six Listings by Model
Every listing below names the Toyota models and positions it is sold for. Model years, trims and drive types vary, so put your vehicle into Amazon’s fit checker before ordering, and do not assume one part fits every version of a model.
1. MOOG 513258: Front Wheel Bearing and Hub Assembly for Toyota RAV4

- Front hub assembly, sold singly
- Lists 2006-2012 and 2013-2018 RAV4
- Also 2016-2020 Mirai, 2011-2016 Scion tC
- Quad lip seal, sealed bearing, studs fitted
MOOG 513258 is a front wheel bearing and hub assembly, and its Amazon listing names the 2006 to 2012 and 2013 to 2018 Toyota RAV4, along with the 2016 to 2020 Mirai and the 2011 to 2016 Scion tC. Those vehicles share a front hub design, which is why a single part number reaches across two RAV4 generations.
According to the listing, the bearing is sealed and built to run quietly, a quad lip seal is there to keep water and road grit away from the grease, the hub has a rust-resistant finish and the wheel studs come already installed. Because it is a complete unit, you unbolt the old hub from the knuckle and bolt this one in, with no pressing. MOOG belongs to DRiV and prints a plain fit list on the listing, which makes it easy to check against your model year.
This part makes sense for a RAV4 owner hearing a hum from the front that grows with road speed and shifts as the vehicle leans through curves. It is not meant for the rear of the RAV4, which takes a different hub, or for the newer generation that started in 2019. Confirm your year, model and drive type in Amazon’s fit checker before ordering.
2. MOOG 515201: Front Wheel Bearing and Hub Assembly for Toyota Tacoma and 4Runner

- Front hub assembly, sold singly
- Lists 2005-2021 Tacoma, 2003-2021 4Runner
- Also 2007-2014 FJ Cruiser, GX470 and GX460
- Quad lip seal, rust-resistant hub, studs fitted
MOOG 515201 is a front wheel bearing and hub assembly whose Amazon listing names the 2005 to 2021 Tacoma, the 2003 to 2021 4Runner, the 2007 to 2014 FJ Cruiser, the 2003 to 2009 Lexus GX470 and the 2010 to 2021 GX460. These body-on-frame trucks share a front hub layout, so one number covers a long run of years.
The listing describes a sealed bearing designed for quiet running, a quad lip seal that keeps moisture and debris out, a rust-resistant hub and pre-installed wheel studs. It bolts to the steering knuckle as a complete unit, so there is no bearing to press. Other sellers who stock the 515201 number list it for four-wheel-drive trucks, which is a strong reason to confirm your drive type before you buy, since two-wheel-drive Tacomas use a different front hub.
This hub fits the Tacoma owner with a growl or a little play at a front wheel, especially on a truck that sees gravel roads, trailers or a long salty commute. It will not suit the rear axle, which uses a separate design. Check your year, cab, engine and drive type in Amazon’s fit checker, and plan on an alignment check if the steering parts come apart during the job.

3. Timken Front Wheel Bearings: 2-Pack Bare Bearings for Toyota Camry 2004-2017

- Two front wheel bearings in one order
- Lists the 2004-2017 Toyota Camry
- Genuine Timken parts in original packaging
- Bare bearing that presses into the knuckle
This listing is a two-pack of Timken front wheel bearings, and it names the Toyota Camry from 2004 through 2017 for the front position. It is sold on Amazon by Sixity Auto, and the listing states that the bearings are genuine Timken parts shipped in their original packaging with the hardware that comes in the box.
Unlike the hub assemblies elsewhere in this guide, these are bare bearings. The bearing presses into the steering knuckle and the hub flange presses back into the bearing, so the knuckle usually comes off the car and goes on a press or gets a bearing adapter kit. Buying two at once lets you do both front corners while the tools are out. The listing asks you to confirm the fit with Amazon’s own checker.
This pair suits a Camry owner who hears a front hum and plans to do both sides, either at home with the right press equipment or by handing the knuckles to a shop. It is not a bolt-on part, so it is a poor choice if you only have hand tools. Confirm your year, engine and trim in the fit checker, and note any ABS parts on the old bearing before you order.
View Timken Camry Front Bearing Pair on Amazon
4. National 510070: Wheel Bearing for Toyota Corolla 2003-2019

- Bare wheel bearing, sold singly
- Lists the 2003-2019 Toyota Corolla
- Cross-references to 101703
- Heat-treated premium-grade steel
National 510070 is a bare wheel bearing, and its Amazon listing names the 2003 to 2019 Toyota Corolla and notes that it replaces part 101703. National is a long-running bearing brand, and this number covers a wide span of Corolla years, which is handy if you own one of the older sedans that are still common on the road.
The listing describes an advanced heat treatment process, precision manufacturing in premium-grade steel, and rolling elements sized and counted to meet or exceed the load rating of the original bearing. Because it is a bare bearing, it presses into the knuckle rather than bolting on, so the job calls for a press or a set of bearing adapters plus a new hub flange if the old one is scored. Corolla generations changed during this period, so the fit checker matters more here than usual.
This bearing suits a Corolla owner with a steady hum from one corner and access to a press, or one who plans to have a shop press it in. It will not help with a bolt-on hub position, and it is not the right pick for someone who wants to swap a complete hub in the driveway. Confirm your year, body style and engine in Amazon’s fit checker before you order.
View National 510070 on Amazon

5. MOOG 515202: Front Wheel Bearing and Hub Assembly for Toyota Tundra and Sequoia

- Front hub assembly, sold singly
- Lists 2007-2018 Tundra, 2008-2018 Sequoia
- Sealed bearing with quad lip seal
- Rust-resistant hub, studs fitted
MOOG 515202 is a front wheel bearing and hub assembly, and its Amazon listing names the 2007 to 2018 Toyota Tundra and the 2008 to 2018 Sequoia. That covers most of the second-generation Tundra run, a full-size truck that often works hard towing boats, campers and equipment trailers.
The listing describes the same MOOG construction as the other hubs here: a sealed bearing designed for quiet running, a quad lip seal to keep moisture and debris out, a rust-resistant hub and studs already pressed in. It bolts to the knuckle as a single unit. Several other sellers of the 515202 number describe it as a four-wheel-drive part, and two-wheel-drive Tundras use a different front hub, so check your drive type before you add this one to the cart.
This hub suits the owner of a four-wheel-drive Tundra with front growl or play at the wheel that gets worse with speed and load. It is not for the rear axle, and it is the wrong part for a two-wheel-drive truck. Run your year, cab, bed and drive type through Amazon’s fit checker, and torque the hub bolts and axle nut to Toyota’s figures during the install.
6. Detroit Axle Front Wheel Bearing Hubs: 2-Pack for RWD Toyota Tundra 2007-2021

- Two front hub assemblies, RWD only
- Lists 2007-2021 Tundra, 2008-2021 Sequoia
- 5 lugs, 4-bolt square flange
- 10-year warranty as listed
This Detroit Axle kit includes two front wheel bearing and hub assemblies, and the listing names the 2007 to 2021 Toyota Tundra and the 2008 to 2021 Sequoia in rear-wheel-drive form only. The listing puts that limit in capitals, which is helpful, because the four-wheel-drive versions of the same trucks use a different front hub.
Each hub is listed with five lugs and a four-bolt square flange for the front position, and the kit covers both sides in one box. Detroit Axle states a 10-year warranty on the listing. Buying the pair suits a high-mileage truck where both front bearings have covered the same distance, and it saves a second order if the other side starts to hum a few months later.
This kit is a fit for the owner of a two-wheel-drive Tundra or Sequoia who wants both fronts done at once and prefers a value brand over a premium one. It is not for four-wheel-drive trucks or the rear axle, and owners who want a big bearing brand name may lean toward MOOG or Timken. Confirm your year, cab and drive type in Amazon’s fit checker, and torque everything to the factory figures.
View Detroit Axle Tundra RWD Pair on Amazon
Matching a Listing to Your Toyota
Use the table to narrow the six picks down to the best wheel bearing for Toyota models in your driveway, then confirm the exact fit on Amazon.
| Listing | Type and position | Toyota models the listing names | Who it suits |
|---|---|---|---|
| MOOG 513258 | Front hub assembly | 2006-2018 RAV4 | RAV4 owners with front hum |
| MOOG 515201 | Front hub assembly | 2005-2021 Tacoma, 2003-2021 4Runner, 2007-2014 FJ Cruiser | Tacoma and 4Runner owners (check drive type) |
| Timken pair | Front bare bearings, 2 pack | 2004-2017 Camry | Camry owners doing both fronts |
| National 510070 | Bare bearing | 2003-2019 Corolla | Corolla owners with a press or a shop |
| MOOG 515202 | Front hub assembly | 2007-2018 Tundra, 2008-2018 Sequoia | Tundra owners (check drive type) |
| Detroit Axle pair | Front hubs, RWD only | 2007-2021 Tundra, 2008-2021 Sequoia | Two-wheel-drive Tundras |

Salt, Potholes and Toyota Wheel Ends in West Michigan
Our winters test every seal on a wheel end. Once salty moisture works past a seal it thins the grease and pits the races, and spring potholes can dent a race in one hard hit.
Corrosion also slows removal, since truck hubs can rust into the knuckle and bolts can snap. If you hit a pothole hard enough to worry about, our list of signs of pothole damage shows what else to check while you are under the truck.

A worn bearing is not the only thing that rumbles. Cupped tires, a dry CV joint and tired struts can all sound similar at speed, so our rundown of wheel bearing noise symptoms is worth reading before you spend money.
Fitting the New Bearing, and When We Should Do It
Treat a wheel bearing as a safety repair. Support the vehicle on stands, follow the service information for your model, and torque the axle nut and hub bolts to the figures Toyota gives. Owner manuals and warranty booklets for your model year are on Toyota’s owner manuals page, and the full torque specs live in the factory repair manual.

The Camry and Corolla bare bearings need the knuckle on a press or a set of bearing adapters, and our guide to the best wheel bearing press kit explains what that takes. If the hub is welded in by rust or you would rather hand the job over, our wheel bearing replacement in Grand Rapids covers foreign and domestic vehicles, Toyotas included.
Pulling a knuckle can upset the alignment, so have it checked afterward. Our suspension repair service can inspect the rest of the front end too.
More Buying Guides
Frequently Asked Questions
Is a genuine Toyota wheel bearing better than Timken or MOOG?
Not automatically. Reputable aftermarket makers list the Toyota numbers their parts replace, so you can match them to the original. Getting the right number for your model, drive type and corner matters more than the brand on the box.
Do 4WD and 2WD Tacomas and Tundras use the same front hub?
No. The front hubs split by drive type, and a 4WD hub will not fit a two-wheel-drive truck or the other way round. Check your drive type and enter it in Amazon’s fit checker before you order.
Can I replace a Camry or Corolla front wheel bearing without a press?
Not properly. The bare bearing presses into the knuckle, so you need a hydraulic press or a bearing adapter kit, and the knuckle usually comes off the car. If you lack the tools, a shop can press it for you.
Should I replace Toyota wheel bearings in pairs?
It is not required, but on a high-mileage vehicle the other side is often close to worn too. Replacing both on the same axle saves a second visit and keeps the feel even side to side.
Is your Camry, RAV4 or Tacoma humming louder every week? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or ask for a wheel bearing inspection on our contact page.
Working the same hours we do? Bring the Toyota to 456 Carrier St NE after we close and use the after-hours drop-off, adding a note on which corner gets loudest and at what speed.
