As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
The A4 is one of Audi’s most popular sedans, and brake pads are the wear part it goes through most often. Choosing the best brake pads for Audi A4 models starts with one question: is your car a B8 from 2009 to 2016, or a B9 from 2017 onward? The two generations use different pads, and a set that suits one will not bolt onto the other.
This guide sorts out fitment, explains the compounds and then reviews six specific sets, front and rear. If you drive another Audi, our wider guide to brake pads across the Audi lineup covers the rest of the range.
Quick answer
Which brake pads should go on an Audi A4?
For most A4 commuters, a ceramic set gives quiet stops and far less dust than the factory pads. The Brembo P85164N suits many 2017-on cars, and the Bendix CFC1322A suits 2009-2016 cars. Drivers who brake hard can step up to EBC Yellowstuff. Always confirm fitment by year, engine and brake size.
Our Quick Picks
Three quick picks for A4 owners: an OE-style ceramic set for the B9, a ceramic daily set for the B8 and a fast-road compound for spirited drivers. All six sets are reviewed below.

Brembo P85164N
A ceramic front set listed against an Audi factory part number.

Bendix Priority1 CFC1322A
A straightforward ceramic replacement for the B8 generation.

EBC Yellowstuff DP41986R
A race-developed compound that still works from a cold start.
B8 or B9: Sorting Out A4 Brake Fitment
Audi changes the A4’s internal code with each generation. The B8 and its facelift, often called the B8.5, ran from the 2009 to the 2016 model year in the US. The B9 arrived for 2017 and is still the basis of the current car. Front pads, rear pads and rotors all changed between them.
Even inside one generation, Audi fitted more than one brake size, depending on engine and option packages. Check every listing below against your exact car, not the model name alone.
- Generation: 2009-2016 is B8, 2017-on is B9.
- Brake size: a parts counter can look it up by VIN.
- Fit checker: enter year, engine and trim on Amazon.
- Axle: pads are sold per axle, front or rear.
Ceramic, Semi-Metallic or a Performance Compound?
Audi’s factory pads grip well, but they are known for coating the wheels in dark dust within a week or two. That is the main reason A4 owners switch brands. Ceramic pads are the usual answer, because they run cleaner and quieter at the cost of a little initial bite.
Semi-metallic pads, including European ECE-R90 sets, feel closest to the original pedal and handle heat well. They also tend to shed more dust. Performance compounds go a step further, with stronger stops and better fade resistance for drivers who push the car on twisty roads or at the track. Hawk, for example, publishes the operating temperature range of its HPS 5.0 street compound, which helps you judge whether a pad suits your driving.
For a car that mostly commutes, a quiet ceramic set is the sensible default. Our roundup of brake pads for daily driving explains the compound trade-offs in more depth if you are weighing them across brands.
Best Brake Pads for Audi A4: Six Sets Reviewed
Each set below is listed on Amazon US for a named A4 generation, and five are front sets. Confirm year, engine, trim and front or rear with Amazon’s fit checker before you order, because no single listing fits every A4.
1. Brembo P85164N Premium Ceramic: Front Pad Set for Audi OE 8W0698151AQ

- Premium ceramic friction material
- Cross-references Audi OE 8W0698151AQ
- Chamfers and slots to curb vibration and noise
- Installation hardware in the box
Brembo supplies braking parts to many carmakers, and the P85164N is a ceramic front pad set from its Premium aftermarket range. The listing ties it to Audi part number 8W0698151AQ. The 8W code is the platform prefix Audi uses for the B9 generation, so this set is aimed at later A4 sedans, allroads and related models rather than the older B8.
Brembo describes the ceramic friction material as reducing pad wear and dust, which helps keep the A4’s large alloy wheels cleaner between washes. The pads carry chamfers and slots that the maker says cut vibration and noise, and the box includes the hardware needed for installation. Brembo also states that its pads meet or exceed the material specs used by the original manufacturer.
This set suits a commuter who wants the car to feel much as it did when new, with quiet stops and less black film on the rims. It is not a track compound, so drivers who brake hard and often may want something with more heat capacity. Front brake sizes on the B9 vary with engine and package, so confirm the listing against your VIN with Amazon’s fit checker before ordering.
2. PowerStop Z23-1897 Evolution Sport: Carbon-Fiber Ceramic Front Pads for Audi A4

- Carbon-fiber ceramic compound
- Rubberized shims, chamfered and slotted
- Low-dust formula
- Installation hardware included
PowerStop’s Z23 line sits above its everyday replacement pads and is sold as a direct-fit upgrade for daily driven cars. This Z23-1897 front set is titled for the Audi A6 quattro, A4 and A4 quattro, and the 1897 number lines up with front brakes used on many B9-generation cars. The listing itself asks you to confirm fitment through Amazon’s fit bar, which is sound advice on a car with several brake packages.
The pads use a carbon-fiber ceramic compound that PowerStop says raises stopping power over OE replacements. Rubberized shims, chamfers and slots are there to keep the pads quiet, and the maker describes the formula as low dust and resistant to fade. Two pads and the installation hardware come in the box.
This set makes sense for an owner who likes a firmer initial bite on back roads but still drives the car every day. Stronger pads can wear rotors a little faster, so plan on checking rotor thickness at each pad change. If your A4 has the larger front brakes from a sport or performance package, it may need a different part number, so check before buying.
View PowerStop Z23-1897 on Amazon

3. Bendix Priority1 CFC1322A: Ceramic Front Pads for 2009-2016 Audi A4

- Ceramic friction material
- Listed for A4 and A4 quattro 2009-2016
- Engineered to OE fit and form
- Made to resist fade under heat and load
Bendix is a long-running American brake brand, and Priority1 is its line of OE-style replacement pads for everyday cars. The CFC1322A front set lists a clear application: the Audi A4 and A4 quattro from 2009 to 2016, plus the A5, S4, S5 and allroad from similar years. That covers most of the B8 and B8.5 generation, which is still common on Grand Rapids roads.
Bendix says the pads are designed and engineered to OE specifications for fit, form and function. The ceramic friction material is described as giving steady stopping power under high temperatures and heavy loads, and the maker states the pads are built to reduce brake fade. Bendix pitches them at daily commute vehicles and says they are tested to meet or exceed industry standards.
This is the kind of set an owner chooses when the goal is simply to restore normal braking on an older A4 without chasing performance. Ceramic pads tend to stay cleaner than semi-metallic ones, which helps on wheels already fighting road salt. The listing does not mention hardware or a wear sensor, so check whether your old sensor needs replacing and order it separately if so.
View Bendix Priority1 CFC1322A on Amazon
4. PowerStop Euro-Stop ESP1375: ECE-R90 Semi-Metallic Front Pads for Audi A4

- ECE-R90 certified semi-metallic pads
- Listed for A4 2010-16 and A4 quattro 2009-16
- Brake dust comparable to the OE pad
- Machined to OES specifications
Euro-Stop is PowerStop’s range for European cars, and it is built around ECE-R90, the regulation replacement brake pads must meet to be sold in the European Union. The ESP1375 front set lists the A4 from 2010 to 2016, the A4 quattro from 2009 to 2016 and the A4 allroad from 2013 to 2016. It also names the A5 and some 2012-2015 A6 models.
The listing explains that ECE-R90 pads are measured for cold performance, speed sensitivity, friction behavior, compressibility, shear and hardness. In plain terms, they must behave within a tight margin of the original pad. PowerStop says the pads are machined to OES specifications for quiet, smooth braking, and that they produce about the same amount of dust as the OE product.
That last point matters, because Audi’s factory pads have a reputation for dust. If you liked how your A4 stopped when new and can live with dark wheels, this set aims to recreate that feel. Owners who mainly want clean rims may prefer a ceramic pad instead. As with every listing here, check year, engine and brake size with Amazon’s fit checker first.
View PowerStop Euro-Stop ESP1375 on Amazon

5. Brembo P85154 Low-Met: Rear Pad Set for Audi OE 8W0698451P

- Low-metallic alloy steel friction material
- Cross-references Audi OE 8W0698451P
- Chamfers and slots for smoother, quieter stops
- Installation hardware in the box
Rear pads usually last longer than fronts on an A4, but they still wear out, and this Brembo set covers the back axle. The P85154 is a low-metallic pad from Brembo’s aftermarket range, and the listing cross-references it to Audi part number 8W0698451P. As with the front set above, the 8W prefix points to the B9 generation rather than the older B8.
Brembo builds the pad around an alloy steel low-metallic friction material, which tends to give a firm, OE-like pedal and good heat handling. The pads carry chamfers and slots that the maker says reduce vibration and noise, and all the hardware needed for installation comes in the box. Brembo states that its pads meet or exceed the material specs used by the original manufacturer.
This set suits an owner who is replacing the rear pads on a 2017-on A4 and wants a factory feel to match the front brakes. Low-metallic pads usually shed more dust than ceramic ones, so expect darker rear wheels than with a ceramic set. The B9 uses an electronic parking brake, so the rear calipers need a scan tool to enter service mode before the pistons can be retracted.
6. EBC Yellowstuff DP41986R: Street and Track Front Pads for Audi A4/A5 B8

- Race-developed high friction compound
- Listed for Audi A4 and A5 B8 front
- Works from cold
- Rated for street and track use
EBC is a British brake maker, and Yellowstuff is its high friction compound for drivers who use their brakes hard on the street and at the track. The DP41986R set is listed as a front pad for the Audi A4 and A5 B8. EBC describes the compound as race developed and suited to both road driving and track sessions.
The listing highlights high friction for strong stops at speed, a compound it calls zero fade and braking that is effective right from cold. That last claim matters for a Michigan driver, because many track pads feel wooden until they warm up, which is a poor trait on a frozen January commute. A pad that bites on the first stop of the day is easier to live with.
Owners on Audi forums often mention that Yellowstuff makes more dust than a ceramic street pad, so expect to clean the wheels more often. It is best matched to an A4 that sees autocross, track days or fast driving on hilly roads. For a car that only commutes, a ceramic set gives a quieter, cleaner result. Confirm your brake size and model year with Amazon’s fit checker before ordering.
View EBC Yellowstuff DP41986R on Amazon
Matching a Set to Your A4 and Your Driving
The table groups the six picks by generation and job. It is a shortcut to the best brake pads for Audi A4 owners in each situation, not a replacement for checking fitment on your own car.
| Your A4 and driving | Sets that fit the brief | Why | Watch for |
|---|---|---|---|
| B9 (2017-on), daily commuting | Brembo P85164N front, P85154 rear | Both listed against Audi part numbers | Several B9 front brake sizes exist |
| B9, spirited road driving | PowerStop Z23-1897 | Carbon-fiber ceramic with more bite | Check rotor wear at each change |
| B8 (2009-2016), daily commuting | Bendix CFC1322A, PowerStop Euro-Stop | Clean ceramic or OE-feel semi-metallic | Semi-metallic means more dust |
| B8, track days or hard driving | EBC Yellowstuff DP41986R | Fade resistance and strong bite | Extra dust and faster rotor wear |

Rotors deserve a look at every pad change. If yours are below minimum thickness, lipped or warped, new pads on old rotors will feel poor and wear unevenly. Our guide to choosing brake rotors explains blank, drilled and slotted options.
Rear Pads, the Parking Brake and Wear Sensors
Both the B8 and B9 A4 use an electronic parking brake, with a motor on each rear caliper. Before the rear pistons can be pushed back for thicker pads, the system has to be put into service mode with a capable scan tool. Forcing the piston back by hand can damage the motor or the caliper.
The module is also sensitive to low voltage, so keep a charger on the battery during the job. If you plan to do the work yourself, our list of OBD2 scanners that reach Audi brake modules is a good starting point.

A4s use electronic wear sensors that trigger a pad warning on the dash once the friction material gets thin. Many shops replace the sensor at each pad change, because once it has been ground through it will not clear the warning. Our article on the Audi brake pad warning light explains what the message means and how soon to act.
West Michigan Winters and When to Call a Mechanic
Road salt and freeze-thaw cycles are hard on A4 brakes. Rust builds on the rotor faces and caliper brackets, slide pins can seize, and pads can wear unevenly or stick in the bracket. Pad life varies widely with driving style, and our guide on how long brake pads last covers the factors that shorten it.

Grinding noise, a pulsing pedal, a pull to one side or a pad warning that comes back after new pads are all signs to have the brakes inspected. Rear brake work on an A4 is often a shop job because of the parking brake step. Our brake repair in Grand Rapids covers pads, rotors and calipers, and our Audi repair service is led by a factory-trained Audi technician.
More Buying Guides
Frequently Asked Questions
Do B8 and B9 Audi A4 brake pads interchange?
No. The two generations use different calipers and pad shapes, and each one has more than one brake size. Order by model year, engine and trim, and check the result with a fit checker or your VIN.
Can I change the rear pads on my A4 without a scan tool?
Not safely. The electronic parking brake has to be put into service mode so the caliper motors retract before the pistons are pushed back. A scan tool that supports Audi brake functions, or a shop, handles that step.
Why are my Audi A4 wheels always covered in brake dust?
Audi’s factory pads use a compound that grips hard but sheds a lot of dark dust. Switching to a ceramic set, such as the Brembo P85164N or Bendix CFC1322A for the right generation, usually keeps the wheels much cleaner.
What are the best brake pads for Audi A4 winter driving?
A pad that works from cold matters most on a frozen morning. Ceramic and OE-style semi-metallic sets both do well, while some track compounds need heat to bite. Keep the slide pins and brackets clean, since salt causes more trouble than the pad itself.
Ready to get fresh pads on your A4 in Grand Rapids? Call 456 AutoFix at 616-279-3832, Monday to Friday 8am to 5pm, or schedule a brake job through our contact page.
Can’t make it during the day? Use our after-hours drop-off. We’re at 456 Carrier St NE in Creston.
