As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can run the fit checker for your CX-5 before ordering.
Most CX-5 owners shop by brand, but the engine under the hood matters more, because the best engine air filter for Mazda CX 5 models with the 2.5L turbo is a different shape from the one in the naturally aspirated cars.
Below we sort the part numbers by engine and review six Amazon listings from Mazda, Bosch, Purolator, K&N, FRAM and ECOGARD. For a wider look across brands and vehicles, our engine air filter buying guide covers the whole category.
Quick answer
What air filter does a Mazda CX-5 use?
Non-turbo CX-5s with the 2.0L or 2.5L engine use the panel Mazda numbers PE07-13-3A0A, also sold as Bosch 5607WS and Purolator A26280. The 2.5L turbo from 2019 on takes a larger element, listed as ECOGARD XA10597 or FRAM CA12167. Check your engine and the old filter before ordering.
Our Quick Picks
Three starting points: the factory part, a washable option and a turbo match; three more filters are reviewed below.

Genuine Mazda PE07-13-3A0A
The original Mazda element for the naturally aspirated CX-5 airbox.

K&N 33-2480
A clean-and-reuse filter for owners who plan to keep the SUV.

ECOGARD XA10597
The listing names the CX-5 turbo and the Mazda numbers it replaces.
Matching the Filter to Your CX-5 Engine
US CX-5s mostly use Skyactiv-G gas engines, a 2.0L early on and the 2.5L that most owners drive. A 2.5L turbo arrived for 2019, along with a short-lived 2.2L diesel, and those engines do not share one airbox.
- 2.0L and 2.5L without a turbo: the factory element is PE07-13-3A0A. Bosch and Purolator list their versions for 2013-2024 CX-5 models.
- 2.5L turbo, 2019 and newer: the ECOGARD listing marks its XA10597 as turbocharged and cross-references Mazda PY8W-13-3A0 and SH01-13-3A0A.
- 2.2L diesel and newest models: the diesel shares the turbo size per those listings; for the newest years, read the number on your old filter.
The trim name on your window sticker or registration helps, and the engine size is printed on the emissions label under the hood. Put your year, trim and engine into the Amazon fit checker, then compare the new filter’s outline with the old one before you close the box.
What Separates a Good CX-5 Filter From a Poor One
Every panel here stops dust, so the differences lie in the seal, the pleats and the upkeep. A filter that sits loose lets dirty air sneak past the edges.
- The gasket: a soft urethane or foam edge that seats evenly on all four sides.
- Disposable or washable: dry paper and synthetic-blend panels are replaced; oiled cotton gauze is cleaned and re-oiled.
The mass airflow sensor sits just after the filter. Dust that slips past a poor seal, or oil shed by an over-treated cotton filter, can coat it and upset the fuel mixture.
Best Engine Air Filter for Mazda CX 5: Six Filters Reviewed by Engine
The first four picks suit non-turbo engines and the last two the turbo. Confirm year, model and engine on Amazon before buying, since no single filter fits every CX-5.
1. Genuine Mazda PE07-13-3A0A: OEM Air Cleaner Element for Non-Turbo Engines

- Genuine Mazda OEM replacement part
- Factory part number PE07-13-3A0A
- Dry pleated panel element
- Number cross-referenced for non-turbo CX-5 engines
This is Mazda’s own air cleaner element, sold under part number PE07-13-3A0A. The Amazon listing keeps things brief and describes it simply as a genuine OEM replacement part. Aftermarket listings for the CX-5 with the non-turbo 2.0L and 2.5L engines name the same number as the original equipment, which is how most owners and parts counters match it.
The appeal of the factory number is that nothing about the fit is left to interpretation. The frame size, pleat depth and gasket profile are the ones the airbox was designed around, so the lid seats flat and the clips close without any pressure. For an owner who keeps maintenance records by part number, or who wants the SUV to stay exactly as it left the factory, that consistency is the whole point.
Because the listing does not print a fit chart of its own, confirm your year and engine with the Amazon fit checker or a Mazda parts counter before ordering. It is not the right part for the 2019 and newer 2.5L turbo, which takes a different and larger element. It is a plain disposable filter, so expect to replace it on the schedule in your owner’s manual rather than clean it.
View Genuine Mazda PE07-13-3A0A on Amazon
2. Bosch Workshop 5607WS: Cellulose Engine Air Filter with Foam Seal

- Listed for 2013-2024 CX-5
- High pleat count for dirt holding
- Cellulose media, 98% stated efficiency
- Polyurethane foam seal
Bosch sells this panel in its Workshop line, and the listing names 2013-2024 CX-5 models along with the 2012-2018 Mazda3 and 2014-2021 Mazda6. It is a dry filter built on cured cellulose media, and Bosch notes that trim level and engine can affect fitment, so the fit checker still deserves a minute before checkout.
The listing points to a high number of pleats for holding dirt and states 98 percent efficiency at capturing small particles. Bosch also describes the media as spaced evenly to keep airflow resistance low, which helps a filter stay effective as dust builds up over the months. Around the edge sits a polyurethane foam seal, chosen for its elasticity and for keeping water and heat out of the intake.
In practice this is a sensible pick for a commuter CX-5 that gets a new filter on a regular schedule and never sees anything unusual. The foam edge is worth checking at install: press it into the channel all the way around so the lid closes evenly. It is a disposable part with no washing or oiling involved, and it is listed for the non-turbo engines, not the 2.5L turbo.
View Bosch Workshop 5607WS on Amazon

3. Purolator A26280 PurolatorONE: Multi-Fiber Air Filter for 12,000-Mile Intervals

- Listed for 2013-2024 CX-5
- Multi-fiber high-density media
- Rated for up to 12 months or 12,000 miles
- Gasket designed for a tight seal
The PurolatorONE A26280 is listed for 2013-2024 Mazda CX-5 models, plus the 2012-2018 Mazda3 and 2014-2021 Mazda6. It sits in Purolator’s upper filter line and uses what the listing calls multi-fiber, high-density media. Like the Bosch, it matches the non-turbo airbox rather than the larger turbo housing.
Purolator states that the media traps up to 99 percent of dirt, dust and soot and that the filter protects for up to 12 months or 12,000 miles. It also reminds buyers to follow the owner’s manual for the actual service schedule, which is the sensible way to read any filter rating. The gasket is designed to seal tightly so that only filtered air reaches the engine instead of slipping around the edges.
This one suits a driver who likes a simple rule, such as a new air filter every year at the same oil change. The 12,000-mile figure is a ceiling, not a target, so a CX-5 that spends time on gravel roads or in construction traffic may need it sooner. It is disposable, so there is nothing to wash, and turbo owners should skip it in favor of the matching turbo element.
View Purolator A26280 PurolatorONE on Amazon
4. K&N 33-2480: Washable Cotton Gauze Air Filter for Select Mazda Models

- Listed for select 2012-2025 Mazda 3, 6, CX-4, CX-5
- Washable, reusable cotton gauze media
- Cleaning interval of 75,000 highway miles per K&N
- Drops into the factory airbox
K&N’s 33-2480 is a washable replacement panel listed for select 2012-2025 Mazda3, Mazda6, CX-4 and CX-5 models. Instead of paper, it uses layers of cotton gauze treated with a tacky oil that holds dirt in the mesh. It arrives pre-oiled and drops into the factory airbox without changes to the intake.
K&N says the filter needs cleaning only every 75,000 miles under normal highway driving, and it is meant to be washed, re-oiled and reused instead of thrown away. The company also points to less filter waste and a limited lifetime warranty with stated limitations. The listing claims gains in power and acceleration, but on a stock CX-5 the clearer benefit is buying one filter instead of many.
The trade-off is upkeep. When the time comes, clean it with K&N’s kit and apply oil sparingly, because excess oil can drift onto the airflow sensor and cause rough running or a warning light. Plan on a spare disposable filter to run while the washed one dries overnight. Fit varies by trim and engine, so run the Amazon fit checker for your CX-5 and confirm whether it covers your engine before you order.

5. FRAM CA12167 Extra Guard: Engine Air Filter for 2019-2025 CX-5 2.5L and CX-9

- Listed for 2019-2025 CX-5 2.5L and 2019 CX-5 2.2L
- Also listed for 2016-2023 CX-9 2.5L
- Media built for dirt-holding capacity
- Precision fit for the intake housing
FRAM’s CA12167 is the brand’s Extra Guard element in the larger size that Mazda shares between the CX-9 and the turbo CX-5. The listing names the 2019-2025 CX-5 2.5L, the 2019 CX-5 2.2L diesel and the 2016-2023 CX-9 2.5L. Its title does not separate turbo and non-turbo 2.5L engines, but other listings for the same CX-9 element describe it as the turbocharged size.
According to FRAM, the media is built to capture and hold dirt, dust and airborne particles as they collect during normal driving, keeping filtration effective between changes. The filter is made for an accurate fit in the intake housing, which keeps installation quick and helps the seal do its job. It is a straightforward dry filter with no special handling.
This is a reasonable pick for a turbo CX-5 owner who already uses FRAM filters and can find them easily. Because the listing’s engine wording is broad, compare the outline and number with the filter you remove before closing the airbox, since a non-turbo 2.5L takes the smaller PE07-size panel instead. Replace it on the schedule in your owner’s manual, and sooner after dusty seasons.
View FRAM CA12167 Extra Guard on Amazon
6. ECOGARD XA10597: Premium Engine Air Filter for Turbocharged CX-5 and CX-9

- Listed for 2019-2025 CX-5 2.5L turbocharged
- Replaces Mazda PY8W-13-3A0 and SH01-13-3A0A
- Also listed for CX-9 2.5L and 2019 CX-5 2.2L
- Designed for 12,000-mile replacement
The ECOGARD XA10597 is labeled for turbocharged engines, which removes most of the guesswork for 2019 and newer CX-5 owners with the 2.5L turbo. The listing also names the 2016-2023 CX-9 2.5L and the 2019 CX-5 2.2L. It cross-references Mazda part numbers PY8W-13-3A0 and SH01-13-3A0A, so you can check it against the number printed on the frame of your old filter.
ECOGARD describes high-capacity media that catches dust, dirt, pollen and road particles before they reach the intake. The listing ties the filter to steady engine response between service intervals and suggests replacement every 12,000 miles or as the vehicle maker recommends. It is a dry panel, so there is no oiling or cleaning to think about, and the old one goes straight in the trash.
For a turbo owner, this listing is the clearest of the group because it states the engine plainly and prints the part numbers it replaces. That helps when the parts counter, the old filter and the fit checker all need to agree. It will not fit a non-turbo CX-5, and the newest model years can change, so confirm year, trim and engine on Amazon before buying.
View ECOGARD XA10597 on Amazon
CX-5 Air Filters Compared by Engine and Upkeep
The fit column paraphrases each Amazon listing, so verify against your own vehicle.
| Filter | CX-5 fit per listing | Media | Suits |
|---|---|---|---|
| Genuine Mazda PE07-13-3A0A | Non-turbo 2.0L and 2.5L (part number match) | Dry, factory part | Owners who want the original element |
| Bosch Workshop 5607WS | 2013-2024 CX-5 | Dry cellulose | Regular replacement on a schedule |
| Purolator A26280 PurolatorONE | 2013-2024 CX-5 | Dry multi-fiber | Commuters who change it every year |
| K&N 33-2480 | Select 2012-2025 Mazda incl. CX-5 | Oiled cotton, washable | Long-term owners willing to clean it |
| FRAM CA12167 Extra Guard | 2019-2025 CX-5 2.5L, 2019 CX-5 2.2L | Dry, aftermarket | Turbo owners after a familiar brand |
| ECOGARD XA10597 | 2019-2025 CX-5 2.5L turbo | Dry, aftermarket | Turbo owners who want the fit spelled out |
For most drivers, a dry filter changed on schedule is the simple route. A washable filter only pays off if you will actually clean and re-oil it, and it adds little on a stock Skyactiv engine. Keep in mind that the CX-5 also has a cabin filter behind the glove box, which cleans the air you breathe rather than the air the engine burns.

Our cabin air filter roundup covers carbon and particulate options for that part, and changing both filters on the same afternoon keeps your records simple. The engine filter is the one that protects the cylinders, so it comes first if you only do one.
Changing the Filter Yourself, and What West Michigan Does to It
On most CX-5s the airbox lid comes off by releasing its clips or a few fasteners. Work with the engine off and cool, and never start it with the filter out.
- Read the old filter first: the part number on its frame confirms which family your engine uses.
- Clear the housing: wipe out leaves and grit, and set the new panel in facing the same way as the old one.
- Seat it evenly: press the gasket into the channel all the way around, then lock every clip and check the sensor connector is still firmly plugged in.
Mazda lists filters among the wear items its dealers show owners during inspections, on the Mazda USA owner service page. Your owner’s manual gives the interval for your year.

Grand Rapids winters leave sand and dried salt along every shoulder, and summer adds construction dust and gravel lots. A CX-5 parked outside all winter can also collect a mouse nest in the airbox, so open it each spring and look for chewed media.
Prefer to skip the job? We check the engine air filter during factory scheduled maintenance at our Grand Rapids shop.
When a Fresh Filter Leaves the Problem in Place
Even the best engine air filter for Mazda CX 5 engines cannot repair a misfire, a vacuum leak or a tired sensor. If the SUV still hesitates or idles unevenly with a clean filter installed, the fault lies further along.

A light right after a filter change often means a loose airflow sensor plug or an unevenly closed lid. Our post on a check engine light that stays on while the car runs fine covers what to look at first, and a scan tool suited to Mazda models lets you read the code at home.
If the code returns, our check engine light diagnostics in Grand Rapids pull the stored faults and live sensor data.
More Buying Guides
Frequently Asked Questions
Does the CX-5 turbo take a different engine air filter?
Yes. Listings for the 2019 and newer 2.5L turbo, such as ECOGARD XA10597, cross-reference Mazda PY8W-13-3A0, while non-turbo engines use PE07-13-3A0A. The two are not interchangeable, so confirm your engine and the number on the old filter first.
How often should a Mazda CX-5 engine air filter be replaced?
Use the interval in your owner’s manual, which can vary by model year and calls for earlier changes in dusty conditions. Disposable filters such as the Purolator A26280 list up to 12 months or 12,000 miles. Gravel roads and spring road grit justify a look at every oil change.
Is a K&N air filter worth it on a CX-5?
It suits owners who plan to keep the SUV for years and do not mind cleaning and re-oiling it. On a stock engine the main gain is fewer replacements, and too much oil can reach the airflow sensor, so follow K&N’s service instructions closely.
Is a genuine Mazda filter better than Bosch or Purolator?
The genuine part guarantees the original size and seal. Bosch and Purolator build their CX-5 panels to the same footprint, and a correctly seated aftermarket filter protects the engine well, so availability often decides it.
Wondering whether the filter explains how your CX-5 is running? Phone 456 AutoFix at 616-279-3832 Monday through Friday, 8am to 5pm, or request an appointment on our contact page.
Daytime visits hard to fit in? The shop at 456 Carrier St NE, Grand Rapids, MI 49505 has an after-hours drop-off for your Mazda.
