As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can check capacity, reach and dimensions before you buy.
Pulling an engine is the one garage job where the lifting tool matters more than the wrench set. The best engine hoist for you is the one that still carries your engine with the boom stretched far enough to clear the radiator support, rolls in under the car and folds away when the bay goes back to parking.
Below you will find what to measure first, why a stand and a leveler belong in the same plan, and six cranes that cover a compact four-cylinder up to a heavy truck engine.
Quick answer
Which engine hoist should a home mechanic buy?
For most car and light truck engines, a folding 2-ton crane like the Sunex 5222 is the practical size, since its low legs slide under many frames. Pick the OTC 2004 for heavy engines at long reach, and the Dragway swivel davit crane if you load engines into a pickup bed.
Our Quick Picks
Three quick picks for the common jobs: a low-leg 2-ton crane for home garages, a heavy-capacity crane for long reach and a swivel crane for truck beds. All six are reviewed below.

Sunex 5222
Low legs and a fast dual-piston pump in a folding frame.

OTC 2004
Extra capacity and reach for big engines.

Dragway Swivel Davit Crane
A bed-mounted crane for loading engines and parts.
What to Check Before You Buy a Shop Crane
The number on the box is the rating at the shortest boom setting. Pull the boom out to reach over a fender and the rating drops, often to a quarter of the headline figure on the longest setting. Weigh your engine with its transmission if they come out together, then compare that figure with the rating at the reach you will actually use.
- Leg clearance: the legs must roll under the car or past the tires. Low legs help with lowered cars.
- Lift height: check hook height against a tall truck core support and your ceiling.
- Pump and release: a long handle means fewer strokes, and a smooth release valve lowers the engine gently.
- Casters and storage: steel casters suit a rough slab, and a folding frame stores upright.
The car needs support too, so see our guide to the best floor jack for shop use, or the floor jacks that give the most value.
Engine Stand or Hoist? Plan for Both, Plus a Leveler
Engine stand or hoist? When you shop for the best engine hoist, plan on both, because they do different jobs: the crane lifts the engine out of the bay, and the stand holds it at working height so you can rotate it and rebuild it.
A load leveler sits between the hook and the engine. Turning its handle shifts the balance point, so you can tip the engine nose-up to slide it past the firewall or line up a transmission. It matters most on front-wheel-drive cars, where the engine comes out at an angle.
A top mount engine hoist usually means an overhead support bar or a chain hoist on a gantry, not a floor crane. It holds an engine during mount work, while a floor crane takes the engine fully out.
Best Engine Hoist Picks Reviewed
Our best engine hoist list starts with folding floor cranes and ends with a truck-bed crane. Capacities and dimensions come from each Amazon listing or maker page, so recheck the current listing before you order.
1. Sunex 5222: 2-Ton Folding Engine Crane with Dual Pump Pistons

- 2-ton folding shop crane
- Dual pump pistons for faster lifting
- Low-profile 4.7-inch legs
- Chainless design with a 360 degree swivel hook
The Sunex 5222 is a 2-ton folding engine crane from Sunex Tools. It lifts with a hydraulic ram driven by dual pump pistons, which Sunex says reaches maximum height about 25 percent faster than single-pump designs. Fewer handle strokes matter when you are raising an engine a little at a time while checking hoses and wiring.
The legs are low, at 4.7 inches, so they can slide under a wide range of vehicle frames, including sports cars and lowered cars that block taller legs. The boom has four positions, letting you trade reach for capacity depending on how far the engine sits from the front of the car. At the end of the boom is a drop-forged steel hook that swivels 360 degrees, and the chainless boom design is meant to cut down on sway as the load comes up.
When the job is done, the frame folds to a small footprint for storage, which suits a one-car garage that has to hold a car again. As with any crane, the 2-ton figure applies at the shortest boom setting, so check the rating at the position you plan to use. You will also want a load leveler for engines that come out at an angle.
2. OTC 2004: 4,000 lb Folding Floor Crane with 25 to 46 Inch Reach

- 4,000 lb capacity, boom retracted
- 1,000 lb capacity at full extension
- 25 to 46 inch reach
- Folds upright for storage
The OTC 2004 is a 4,000 lb folding floor crane from OTC, a long-standing maker of professional service tools. OTC’s product page for the 2004 lists a reach of 25 to 46 inches, with 3-1/2 inch front wheels and 5-7/8 inch rear casters. That reach range is the reason to look at it, since a long boom lets you get over a deep engine bay without pushing the legs too far under the car.
The listing is clear about what happens as the boom extends. The crane carries 4,000 lb with the boom fully retracted and 1,000 lb with it at full extension, so the long setting is for lighter loads or for reaching over a bumper to pick up a transmission or a rear axle. For a heavy V8 or diesel, the extra capacity at middle settings is what makes this crane a sensible step up from 2-ton designs.
The frame folds into a compact upright package for storage, which helps in a shared garage. It is a larger, heavier crane than a home 2-ton unit, so measure your floor space and door openings before ordering. Pair it with a leveler and an engine stand rated for your engine.

3. OTC 2002: 2,000 lb Folding Engine Hoist with 24 to 36 Inch Reach

- 2,000 lb capacity, boom retracted
- 500 lb capacity at full extension
- 24 to 36 inch reach
- Compact upright folding frame
The OTC 2002 is the smaller sibling of the OTC 2004, rated at 2,000 lb, or one ton, with the boom fully retracted. That is half the headline capacity of many folding cranes sold as 2-ton units, but OTC states its figures plainly, including the 500 lb rating at full extension. Maximum reach is 24 inches retracted and 36 inches extended.
Those numbers point it toward lighter work: compact four-cylinder engines, motorcycle and small-car engines, transmissions on a bench, or moving heavy parts around a shop. The front wheels are 3-1/2 inches and the rear casters 5-7/8 inches, which the listing says helps with mobility and with fine positioning while the crane is in use. A smaller frame is also easier to steer around a cramped garage than a long-legged heavy-duty unit.
The crane folds into a compact upright package to save floor space when it is not in use. Before choosing it, weigh the engine you plan to lift, along with any transmission or accessories that come out with it, and compare that with the rating at the boom setting you need. For larger engines, the OTC 2004 or a 2-ton design is the safer match.
4. OEMTOOLS 24830: 2-Ton Foldable Engine Hoist with 4-Position Boom

- 2-ton lifting capacity
- Four-position adjustable boom
- Six 360 degree metal swivel casters
- Long pump lever and release valve
The OEMTOOLS 24830 is a foldable 2-ton engine hoist aimed at home builders and rebuilders. OEMTOOLS describes it for lifting car and truck engines during builds and rebuilds, and the listing even mentions use in airplane repair. The boom has four positions, so you can set reach and capacity to suit the engine and the vehicle.
Lifting is done with a long pump lever, which gives more leverage per stroke and makes raising a heavy engine less tiring. A release valve is meant to give smooth, controlled lowering, which counts most at the end of the job, when the engine has to settle gently onto its mounts or onto a stand. Six metal swivel casters rotate a full 360 degrees, so the crane can be moved and lined up in tight spots.
The frame folds for storage, freeing floor space once the engine is back in. Like other 2-ton folding cranes, the full rating applies only at the shortest boom setting, and the listing does not publish a figure for each position, so check the label on the boom before lifting. If you plan to tilt the engine to clear the firewall, budget for a load leveler as well.

5. Dragway Tools 2 Ton: Folding Hydraulic Engine Hoist with 88-Inch Boom Range

- 2-ton folding cherry picker
- Boom range from floor to 88 inches
- Six rotating 3-inch steel casters
- 12-inch forged chain and 5/16-inch hook
The Dragway Tools 2 Ton is a folding hydraulic cherry picker built for lifting engines out of cars, trucks and SUVs. The figure that stands out on the listing is the boom range, from the floor up to 88 inches. That height helps when the engine has to clear a tall radiator support on a pickup or when you are setting an engine onto a high stand.
The listing gives working dimensions of 60 by 37 by 56 inches, which is useful for planning where the crane will sit in your garage. It rolls on six fully rotating 3-inch steel casters, so it can be moved in any direction, and it comes with a 12-inch forged steel chain and a 5/16-inch hook for attaching to a leveler or lifting brackets.
Because the boom reaches so high, check your garage ceiling and any door tracks or lights before you raise a load to full height. The frame folds for storage when the job is done. As with any folding crane, the 2-ton rating is for the shortest boom position, so confirm the rating at the setting you need, use a leveler for awkward engines and never work under a suspended load.
View Dragway Tools 2 Ton on Amazon
6. Dragway Tools Swivel Davit Crane: 2,000 lb Bed-Mount Engine Hoist with Removable Base

- 1,000 to 2,000 lb lift capacity
- 360 degree rotation
- 3-ton hydraulic ram
- Mounts to a truck or trailer bed
The Dragway Tools Swivel Davit Crane is a different kind of engine hoist from the folding floor cranes above. Instead of rolling on casters, it mounts directly to the bed of a pickup truck or trailer, and its base can be removed when you need the bed back. The listing gives a lift capacity of 1,000 to 2,000 lb, depending on boom setting, with power from a 3-ton hydraulic ram.
The boom rotates 360 degrees, so you can lift an engine, transmission or other heavy part from the ground beside the truck and swing it over the bed. That makes it a practical engine hoist alternative for anyone who buys used engines, hauls cores to a machine shop or picks up parts where no floor crane is available. A heavy-duty chain and hook are included.
It is not designed to pull an engine out of a car’s engine bay the way a floor crane is, so most home mechanics would treat it as a second tool rather than the only one. The truck bed or trailer has to be strong enough for the mounting and the load, so follow the instructions on bolting it down and keep the vehicle parked on level ground while lifting.
View Dragway Swivel Davit Crane on Amazon
The Six Cranes Side by Side
Engine hoist ratings online mix star scores and copied specs, so compare the numbers each listing or maker actually publishes. Where a listing leaves a figure out, check the manual before you rely on it.
| Crane | Listed capacity | Stated reach or range | Suits |
|---|---|---|---|
| Sunex 5222 | 2 tons | 4 boom positions, 4.7 in legs | Low cars and quick lifting |
| OTC 2004 | 4,000 lb retracted, 1,000 lb extended | 25 to 46 in reach | Heavy engines and long reach |
| OTC 2002 | 2,000 lb retracted, 500 lb extended | 24 to 36 in reach | Smaller engines in a tight garage |
| OEMTOOLS 24830 | 2 tons | 4 boom positions | Home builds and rebuilds |
| Dragway Tools 2 Ton | 2 tons | Floor to 88 in boom range | Tall trucks and high core supports |
| Dragway Swivel Davit | 1,000 to 2,000 lb | 360 degree rotation | Loading a truck or trailer bed |
Hunting for the cheapest engine hoist? Generic and name-brand cranes often share a design, so the differences show up in documentation, rating at long reach and parts support.

Lifting an Engine Safely in a Home Garage
Most hoist accidents happen when the load swings or the crane rolls. Keep these habits on every lift:
- Bolt chains to solid points: use grade-rated bolts in lifting brackets or holes the manual approves.
- Stay clear of the load: never put hands, feet or your head under a suspended engine.
- Lift low, move low: raise the engine only as high as needed and roll the crane slowly.
- Check the floor: cracked or heaved concrete, common after West Michigan freeze-thaw winters, can catch a caster and tip a loaded crane.
- Wear protection: safety glasses and gloves, with a clear path to the stand.

Cold matters too. In an unheated garage, hydraulic oil thickens and the ram can lower more slowly than you expect, so test the release with a light load first. A basic mechanic tool set covers most of the bolts on the way out, and a shop creeper saves your back when you reach the bell housing.
When the Engine Can Stay in the Car
Many jobs that send people shopping for a crane can be done with the engine in place. Timing belts and chains, water pumps and many leaks are serviced in the car, and our timing belt replacement in Grand Rapids is one example. If the engine is running poorly, a check engine light diagnostic first can tell you whether a pull is even needed.

Engines last longer when oil, filters and belts are changed on schedule. Our factory scheduled maintenance in Grand Rapids follows the maker’s intervals, which helps keep the engine out of the kind of trouble that ends with a hoist in the garage.
More Buying Guides
Frequently Asked Questions
What size engine hoist do I need?
Add the weight of the engine and anything that comes out with it, then check the crane’s rating at the boom position you will use. A 2-ton folding crane covers most car and light truck engines, while big diesels call for more capacity at long reach.
What is the best engine hoist brand?
No single brand wins every job. OTC and Sunex publish clear capacity and reach figures, and OEMTOOLS and Dragway Tools offer folding cranes for home garages. Compare the rating at full extension and parts support rather than the name.
Do I need an engine stand and hoist?
Yes, for a rebuild. The hoist lifts the engine out, and the stand holds and rotates it while you work. Never leave an engine hanging on a crane while you work on it.
What is the best engine hoist leveler setup?
Match the leveler’s rating to your engine, and use one with a crank handle and adjustable chain positions. It lets you tilt the engine to clear the firewall or line up the transmission without rehooking chains.
Not sure the engine has to come out at all? Talk to 456 AutoFix at 616-279-3832 on a weekday from 8am to 5pm, or ask for an appointment through our contact page.
If your hours don’t line up with ours, the after-hours drop-off at 456 Carrier St NE in Creston lets you leave the car and keys with us outside business hours.
