As an Amazon Associate, 456 AutoFix earns from qualifying purchases. Product links below go to Amazon, where you can confirm the right part for your vehicle.
Ford’s 6.7L Power Stroke has powered Super Duty pickups since the 2011 model year. Water, rust flakes and fine grit that slip past a tired filter end up at the high-pressure pump and injectors. Picking the best fuel filter for 6.7 Powerstroke trucks comes down to two questions: which model year you drive, and whether you want a stock replacement or a change to the upper filter housing.
This guide covers factory Motorcraft parts, two aftermarket filters with published efficiency figures and two billet upper housing kits. Filters only clean the fuel that reaches them, so if you suspect weak supply from the tank, our roundup of fuel pump brands and how they compare is the next stop.
Quick answer
Which fuel filter does a 6.7 Power Stroke need?
Start with the model year. On 2017 and later trucks, Motorcraft FD-4625 is the number most listings cross to, and Doc’s Diesel and K&N sell alternatives for the same years. For 2011-2016 trucks, a Doc’s Diesel filter that interchanges with FD-4615 fits. Confirm by VIN on Amazon before ordering.
Our Quick Picks
Three places to start: the factory number for 2017 and later trucks, a cross-referenced filter for 2011-2016 trucks and a billet upper housing kit. All six picks, including two more filters and a second housing kit, are reviewed below.

Motorcraft FD-4625
Ford's own filter number that later 6.7L replacement listings point back to.

Doc's Diesel 2011-2016 Fuel Filter
Cross-referenced filter for the first generation of 6.7L Super Duty trucks.

H&S Motorsports 121003
Swaps the factory plastic upper filter cap for a billet housing.
Two Filters, Two Jobs on the 6.7L
The 6.7L Power Stroke cleans its fuel in two places. A lower filter sits in the fuel conditioning module on the frame rail, where it also separates water and houses the water-in-fuel sensor. A second, finer filter is mounted on top of the engine, and owners usually call it the upper filter.
Both matter because modern diesels lean hard on precise injection. The U.S. Department of Energy’s fuel economy site notes that improved fuel injection and electronic engine control are a big part of why today’s diesels make more power and run more efficiently.
Kit, Element or Upgrade: Sorting Out What to Order
Searches for a fuel filter kit, an upper fuel filter or a full fuel filter system for this engine all lead to slightly different products. Settle these points first.
- Model year split: 2011-2016 trucks and 2017-and-later trucks use different part numbers, so a filter for one group will not suit the other.
- Box contents: some listings hold a single element, others a matched upper and lower set. Read the listing and count what your truck takes.
- Cross-reference: match the Motorcraft number on your old filter to the listing.
- Housing changes: billet upper housing kits replace the factory plastic cap. They are an optional change, not a maintenance item.
Best Fuel Filter for 6.7 Powerstroke: Six Picks in Detail
Each pick below is one listing for a stated range of years, so confirm the year, model and engine on Amazon before buying. Features and fitment notes come from the Amazon listings, not from our own testing.
1. Motorcraft FD-4625: Genuine Ford Fuel Filter Element, Vehicle Specific

- Genuine Motorcraft part number FD4625
- Listed as a vehicle-specific fit
- Country of origin listed as United States
- Number that 2017-on 6.7L replacements cross to
Motorcraft is Ford’s in-house parts line, and FD-4625 is the number that aftermarket listings for 2017 and later 6.7L Power Stroke trucks keep pointing back to. The Doc’s Diesel filter later in this guide, for instance, is sold as a fit for FD-4625 applications. Buying the Motorcraft part itself takes the guesswork out of matching an aftermarket cross-reference.
The Amazon listing is short on detail. It gives the part number, marks the fit as vehicle specific and names the United States as the country of origin, but it does not publish media type, micron rating or a list of what comes in the box. Because of that, check the item photos and description to see whether you are getting a single element or the set your truck takes for both filter positions.
This is a sound choice for owners who want the same part a Ford dealer would fit, whether the truck is still under warranty or simply well kept. It is not for 2011-2016 trucks, which use a different number, and it will not fit any other engine. Enter your VIN in the listing’s fitment tool, and follow Ford’s priming steps once the new filter is in.
View Motorcraft FD-4625 on Amazon
2. Doc’s Diesel Fuel Filter: 3-Micron Water Separator for 2017-2026 6.7L Power Stroke

- Fits FD-4625 applications, 2017-2026 6.7L
- 98.76% efficiency at 3 microns, third-party tested
- Three-layer pleated cellulose glass media
- Ships with the O-rings needed for install
Doc’s Diesel sells this filter as a fit for 2017 through 2026 6.7L Power Stroke F-250, F-350 and F-450 trucks, and it is listed against the FD-4625 number. The listing describes it as a fuel and water separator filter. It suits owners who want an aftermarket option with more published detail than a bare part number.
The media is a three-layer pleated cellulose and glass blend that the maker says traps fine rust and grit while holding more dirt before flow drops off. Doc’s quotes 98.76 percent efficiency at 3 microns, confirmed by an independent lab under the SAE J1985 test standard. The housing is high-strength carbon steel, and each filter ships with the O-rings needed for the job, so there is nothing extra to order.
If you change your own filters and want a published test figure to compare against, this is a reasonable pick. The listing mentions F-250 to F-450 only, so owners of F-550 chassis cabs should check the fitment card before ordering. Follow Ford’s service interval in your owner’s manual rather than a generic mileage figure, and confirm by VIN before you buy.
View Doc's Diesel 2017+ Fuel Filter on Amazon

3. K&N PF-4900: Pleated Cellulose Glass Diesel Fuel Filter for 2017-2026 6.7L

- Fits 2017-2026 Ford F Series 6.7L diesel
- Pleated cellulose glass filter media
- Listed to meet or exceed OEM replacements
- Sold by K&N as a diesel fuel filter kit
K&N is best known for reusable air filters, but the company also sells disposable fuel filters, and PF-4900 is its number for 2017 through 2026 Ford F Series trucks with the 6.7L Power Stroke. The listing presents it as a direct replacement that meets or exceeds the OEM 6.7 Power Stroke fuel filter. It offers a second brand-name choice for later trucks alongside Motorcraft and Doc’s Diesel.
The filter uses premium pleated cellulose glass media, which K&N says gives strong fuel system protection and a long service life. The listing also stresses consistent fuel delivery, the practical goal of any diesel filter. It does not publish a micron rating or an efficiency percentage, so it is harder to compare on paper than the Doc’s Diesel filter above.
This pick fits owners who already use K&N parts or who want a widely stocked brand for later Super Duty trucks. The listing calls it a kit, so check the photos and description to confirm whether it covers one filter position or both. It is not a match for 2011-2016 trucks, so confirm the year, model and engine with your VIN on Amazon before ordering.
4. Doc’s Diesel Fuel Filter: 3-Micron Replacement for 2011-2016 6.7L Power Stroke

- Fits 2011-2016 F-250 to F-550 6.7L
- 98.84% efficiency at 3 microns, third-party tested
- Interchanges with Motorcraft FD-4615
- Separates water from dirt, rust and debris
Owners of 2011 through 2016 Super Duty trucks need a different number from later models, and this Doc’s Diesel filter is listed for that earlier group of F-250, F-350, F-450 and F-550 trucks. The listing gives a full interchange: Motorcraft FD-4615, Wix 33615, Baldwin BF9895, Premium Guard DF4615 and Purolator F76160. That list makes it easy to check against the number printed on the filter you are removing.
Doc’s quotes 98.84 percent efficiency down to 3 microns from independent testing, so the figure is not just an in-house claim. The filter is described as separating water and trapping dirt, rust and debris before they reach the rest of the fuel system. A fitment card on the listing lets you confirm your year and configuration before you check out.
This is the pick for an owner of an earlier 6.7L who wants an alternative to the factory part with a published test number. It will not fit 2017 and later trucks, and the listing does not say how many elements are in the box, so compare it with what your truck uses. Stick to Ford’s interval in your owner’s manual, and confirm fit by VIN before buying.
View Doc's Diesel 2011-2016 Fuel Filter on Amazon

5. H&S Motorsports 121003: Billet Upper Fuel Filter Conversion Kit for 2011-2025 6.7L

- Replaces the plastic upper filter cap
- Billet H&S filter housing
- No need to remove factory line fittings at service
- Built and assembled in the USA
H&S Motorsports builds this kit for 2011 through 2025 Ford 6.7L Power Stroke F-250, F-350, F-450 and F-550 trucks, and it answers the search for an upper fuel filter upgrade rather than a plain replacement element. The kit removes the factory plastic fuel filter cap and puts a billet H&S housing in its place. The maker describes the stock cap as brittle and prone to breaking, which can cause a fuel leak.
A practical benefit, according to the listing, is that you no longer have to disconnect the factory fuel line fittings each time you change the upper filter. H&S says the kit installs in a home garage and uses quality materials, lines and fittings. It is built and assembled in the USA.
This kit makes sense if your upper cap has already cracked or seeped, or if you change filters often and want an easier routine. It is a housing change, so you still need to buy and fit filters on schedule afterward, and you should read the listing to see which filter the new housing takes. Confirm fit for your year and fittings, and if you are not comfortable working on a pressurized fuel system, have a shop fit it.
View H&S Motorsports 121003 on Amazon
6. Sinister Diesel SD-FFCV-6.7: Billet Upper Filter Housing with 4-Micron Baldwin Filter

- Includes a Baldwin 4-micron fuel filter
- Tool-free install at the factory mount
- Covers 2-nipple and 3-nipple factory layouts
- USA-machined billet aluminum, blue anodized
Sinister Diesel’s SD-FFCV-6.7 is a second route for owners who want a fuel filter upgrade on the upper housing. Like the H&S kit, it replaces the factory plastic housing, which the maker says can crack, leak fuel, lose fuel pressure and create a possible fire hazard. The listing title names 2011-2024 trucks while the feature bullets say 2011-2026 F-250 to F-550, so check your year carefully.
The kit uses the factory mounting location and, per Sinister, goes on in about five minutes with no tools, cutting, splicing or changes to Ford’s fuel lines. It ships with a Baldwin 4-micron filter that the maker says is matched to factory filtration, and later changes need no wrenches or sockets. Parts are included for both 2-nipple and 3-nipple factory setups, and the housing is USA-machined billet aluminum with a blue anodized finish.
Owners who like simple, tool-free service will find this kit the easier one to live with. Its updated design uses fewer plugs and an O-ring sealed nipple to cut down on possible leak points. As with any housing kit, keep up with filter changes afterward and confirm which factory layout your truck has before ordering.
View Sinister Diesel SD-FFCV-6.7 on Amazon
Matching the Filter to Your Super Duty
| Truck | Pick from this guide | Type | Check before buying |
|---|---|---|---|
| 2017 and later 6.7L | Motorcraft FD-4625 | Factory element | How many elements the listing includes |
| 2017-2026 6.7L | Doc’s Diesel (FD-4625 fit) | Aftermarket replacement | Your year and body on the fitment card |
| 2017-2026 6.7L | K&N PF-4900 | Aftermarket replacement | Whether it covers both filter positions |
| 2011-2016 6.7L | Doc’s Diesel (FD-4615 interchange) | Aftermarket replacement | Interchange number on your old filter |
| 2011-2025 6.7L | H&S Motorsports 121003 | Upper housing conversion | Fit for your year and fittings |
| 2011-2026 6.7L | Sinister Diesel SD-FFCV-6.7 | Upper housing conversion | 2-nipple or 3-nipple factory layout |

Stock Upper Housing or a Fuel Filter Upgrade?
The factory upper filter sits under a plastic cap, and some owners replace it with billet aluminum after a crack or leak. The H&S and Sinister listings both describe the plastic part as prone to failure and say their kits remove it.
If the stock housing is sound, a quality element changed on schedule does the main job. Whichever route you choose, follow the service interval in your owner’s manual and shorten it after a doubtful tank of fuel or a summer of heavy towing.
- Clean first: wipe the housing and cap so grit cannot drop onto the clean side of the filter.
- Fresh seals: fit the new O-rings that come with the element and do not overtighten a plastic cap.
- Prime it: follow Ford’s procedure, which on these trucks usually means cycling the key so the electric pump fills the system before you crank.
- Look again: idle the engine and check for seepage.

West Michigan winters add their own problem. Humid summers leave condensation in half-full tanks, and water that settles in the separator can freeze on a January morning. Drain the separator before the cold arrives, keep the tank fuller and read our guide to anti-gel additives for diesel fuel if your truck sits outside overnight.
When a New Filter Doesn’t Solve It
A restricted filter usually shows up as a hard start, a flat spot under load or power that fades on a long climb with a trailer behind you. Our article on why a vehicle hesitates when you press the accelerator lays out the other causes worth ruling out. If symptoms remain, look at supply pressure, injectors and sensors.

Fuel pressure and water-in-fuel problems often store a code before the truck feels any different. Our post on a check engine light that stays on while the engine runs normally explains why the code still deserves attention. For a proper answer, our team handles check engine light diagnosis at our Grand Rapids shop.
In short, the best fuel filter for 6.7 Powerstroke engines is the one listed for your exact years, fitted with new seals, primed correctly and changed on Ford’s schedule.
More Buying Guides
Frequently Asked Questions
What is the upper fuel filter on a 6.7 Power Stroke?
It is the finer of the two filters, mounted on top of the engine under a cap. It cleans fuel a second time after the lower filter and water separator on the frame rail, just before the fuel heads to the high-pressure pump.
Is a fuel filter upgrade worth it on a 6.7 Power Stroke?
A billet upper housing kit replaces the factory plastic cap, which some owners have had crack or leak. It is worth considering after a leak or if you change filters often, but it does not replace regular filter changes.
Should I replace both 6.7 Power Stroke fuel filters at once?
Most owners do, so the two stages stay on the same schedule. Check whether your listing includes one element or a matched set, and follow the interval in your owner’s manual.
Do I need to prime the 6.7 Power Stroke after a fuel filter change?
Yes. Follow Ford’s priming steps, which usually involve cycling the key so the electric pump refills the system before you start the engine. Air left in the lines can cause hard starts and rough running.
Still fighting a rough start or a stubborn warning light after fresh filters? Phone 456 AutoFix on 616-279-3832 between 8am and 5pm, Monday to Friday, or reach us through the contact page to set up a diagnostic visit.
If your workday overlaps our hours, our after-hours drop-off lets you leave the truck at 456 Carrier St NE, Grand Rapids, and we will take it from there.
